Hager F82N/F82K 40/80mm
Hager mountings 40mm (F82N) / 80mm (F82K), compatible with Hager 80/90 SL
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 519
- Polubienia
- 13
- Ocena
- 5
1469 modeli
Hager mountings 40mm (F82N) / 80mm (F82K), compatible with Hager 80/90 SL
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adaptor to fit 80mm air duct onto a 100mm inline fan. The fan pipe outer diameter should be a few mm less than 100mm, and the adaptor should be a perfect fit. If your fan is not a good fit, scale the model using larger inner wall…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Air Hose Adapter for 125mm to 180mm, outer diameter, no support required german version below Dieser Abluftadapter hat an der kleinen Seite die Möglichkeit einen 125mm Abluftschlauch anzuschließen, auf der anderen Seite ist der äußere…
Wydruk około 6,69 €–8,17 € nettoWstępna wycena jednego wariantu
Bonsai pot 32 hexagonal curved semi-cascade 135x135x80mm, support is necessary.
Wydruk około 5,89 €–7,19 € nettoWstępna wycena jednego wariantu
Based on the model created by @Edward ( https://www.printables.com/model/268401-noctua-desk-fan ), I've adapted it for an 80mm fan. Thanks Edward, it was an easy print! Added gcode as reference for the time, but I suggest using the STL…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
This variation is exactly the same size as a standard 80mm fan to appear flush when mounted directly to fan. Low profile
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Der Deckel geht am Anfang etwas streng, das legt sich mit der Zeit, man muss nur ein paar mal hin und her schieben. Danach kann man es auch mit nur einer Hand verwenden. Was praktisch ist und somit muss das Glas nicht mehr geöffnet…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A vent grate for a printer enclosure with a raised edge to make a better seal. Compared to one that arrived with my enclosure, it provides better air flow, and has larger 5mm screw holes. This is part of my Printer Enclosure Ventilation…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Turn table with 10° indication marks with a 0° reference point. Used to take photogrammetry pictures. constructed around a bearing 40/68x15 mm. the base has extra dove-tail cut-ins to receive DIY accessories of your making.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
En petite section, à l'école , beaucoup d'enfants triturent leur trousse et en sortent quelque fois des choses innommables, ou même quelque fois la même couleur de stylo que celui qui sert à la correction du professeur… Ce plumier collé…
Wydruk około 7,12 €–8,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 80mm christmas tree ornament sphere has a very nice shape and is easy to print. I recommend to use metallic filament for an even better look as mentioned on the pictures. Available in TWO versions with SLIM & MEDIUM fins. The cap is…
Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…
These strong, reusable plant stakes are designed to help support stems and keep plants upright as they grow. Whether you're dealing with seedlings or mature plants starting to lean under their own weight, these supports offer a clean,…
Reliably measures saddle height based on the point where the saddle is 80mm wide. I don't know much about bike fitting, and I've never been particularly good at measuring saddle height, so today when I saw Ronan McLaughlin share his home…
Now you can get a very small articulated Snake !!! The design is made for support free printing! I used 2 walls and 15% infill and a brim with 0.6mm distance to the object. I only had to rotate each segment that it works smooth. The…
All fans have 4.2mm screw holes and fit within the dimensions of a standard fan. Screw spacings are also standard. 80mm, 71.5 hole spacing 120mm, 105 hole spacing 140mm, 124.5 hole spacing The Hexagon pattern is 12mm hexagons side to…
It has a hole for a 2mm motor shaft. It has 10 blades and a diameter of 80mm.
print it upside down. .2mm layers. textured PEI looks best imo
Discussion A replacement mainboard cover for the Qidi Plus4 that allows for the use of an 80x25mm fan This is a variant of my other honeycomb design posted on Thingiverse This variant positions the fan more centrally over the hottest…
Fan mount for passively cooled Nvidia Tesla K40 and P40 GPU's. designed to work with dual GPU's.
Easy-thread, quick-screw (I had to say it sorry) fiesta! A plethora of containers with easy-thread screw-tops. I was not satisfied with my previous creation due to a lack of deboss resulting in unsightly seamlines. Also the walls were…
Noctua design high efficiency fan grille scaled down to 80mm. Added a pocket to compensate for using noctua NA-SAV2 Anti vibration mounts.
Universal test print to perfectly level your heat bed.
EDIT 10-12-2018: To be clear, you will need two 608ZZ bearings . EDIT 4-12-2018: As I found it difficult to print the roller in one piece without breaking the small pins on the outsides, I remixed Keleo's design "Roller with removable…
This is a dust filter for a variety of fan sizes. The printed mesh blocks dust and debris from getting stuck in a fan. You could add a colour change in the second layer to create a beautiful effect. Make sure you are printing with a 0.4mm…
English Description of the 3D-Printed Desk Cable Pass-through: Purpose and Hole Diameter: The cable pass-through is designed to route cables neatly through an 80 mm hole diameter in desks, shelves, or work surfaces. Modular Design: The…
I designed this fan guard for an 80mm Noctua fan, but it will work for others as well. It is 2 mm thick and has holes for 4mm screws plus some tolerance. The screw holes are 71.5mm center to center. If you prefer a thicker guard, just…
Big hexagon flower pot mold form 180mm
This is travel box for pills with three compartments. It is bigger alternative of my small Pill Box . The diameter is 80mm and total height is 25mm. The cross is printed separately and glued to the lid. Recomended layer height for good…
2020 T-Slot Nut Connector 80mm (M4 Thread / No thread) Resize/Scale to adjust dimension Suitable for: All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you downloaded…
Build plate holders for 280mm x 280mm build plates. Primarily made for the QiDi Q2 but can fit any other build plates of similar size. Recommended print settings: PETG 3 walls 10-15% infill 5 bottom, 5 top layers You can print this on the…
A number 1 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
Using Merkelerk's nice fan cover design ( https://www.thingiverse.com/thing:2755547 ), I made this exhaust pipe and modified the fan cover to mount a 80mm fan for an Ikea Lack enclosure. The exhaust is 0,5 mm higher than the thickness of…
This is my another 80mm bike bottle holder with improved side walls to hold bottle more stable. Print instructions Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,2 layer Infill: 30% Filament: Plast-Spaw PLA,…
A number 7 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
Bike Water Bottle Holder This remix is inspired by kf7wrw 's Bike water bottle holder v2. I decided to create a remix to fit the diameters of the bottle and bike to my needs, because the bike has no threaded mounting. Intended Bottle…
Spiral Bed Level Test These are Spiral Bed Leveling tests created using an OpenScad File. The OpenScad File is included so you can customize your own Spiral test size. I use these to set the Z Offset on the fly after auto leveling with a…
rest the larger opening on the print bed and print with brim and no supports. preferred layer height is 0.1mm but also 0.15 mm will work. Print instructions print with no supports and brim by resting on the larger opening.
Easy to print in place. Will fit on a 180mm X 180mm build plate.
I decided to design a beautifull fan grid for my minimalist 3D printed fume extractor designed by Rdmmkr. https://www.instructables.com/member/rdmmkr/
A number 2 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
A number 3 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
This is a variation on a great design I liked that made that made a little too much noise. This one is silent, enjoy,
This print allows you to modify and enclosure with active cooling with an 80mm computer fan. This can be used in outdoor enclosures, entertainment units etc. to remove excess heat. Use a hole-saw or otherwise to cut an 80mm hole in the…
Just a long peg for Multiboard or other compatible peg board setups.
The walls of the hex grid are 0,4mm exactly so scaling down might get ugly. Can of course be scaled up to fit other fan sizes. Has somewhat good airflow left in my print (make sure not to over extrude the hex gird). Happy printing
A very secure bag clip to close any opened bags. The hinge is designed with low tolerances to ensure a secure fit, and prevent any loose feeling parts. Clip surface is recessed for enhanced grip. The two notch design makes sure that the…
This an 80mm objective diameter, 330mm focal length refractor telescope. It is a work in progress, but it should be functional as-is with some fuss and fitting. each section is small enough to be printed on a Prusa Mini. It uses this…
A jet fan, made to fit a 120x120x25mm or 80x80x10 computer fan. fan is kept in place by a tight fitting dove joint. the ball joint with screw makes for a rotatable fan that can be locked in the required position. Unlikely I will ever…
A number 6 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
You don't need supports to print this and you can print it fast m3 - m4 screws work well and nuts for them are required. Make sure the material you print this with can withstand your environment temperatures.
Made in OpenSCAD 2021.01 Verified that the model works for 80, 120 and 140mm fans, if you decide to build the grill yourself, make sure that your mounting hole spacing is correct. The .scad file contains a few links for datasheets about…
Quick design I made to display some of my favorite prints. Feel free to use it however you wish. I have also included the fusion 360 file in case anyone would like to change it. Print instructions No supports just print and place your…
I really like CSD_Salzburg's Skadis designs but these containers just take too long to print. So I adapted a vase printing idea to be used with the IKEA Skadis containers and added a little twist. I also added a little feature trick to…
A plaque for the Orbital 380mm Barrage UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more accurate to the in game version.
Další dekorační váza z mé dílny, tentokráte lze dovnitř nalít vodu a dát živou květinu. Another decorative vase from my workshop, this time you can pour water inside and put a live flower. Print instructions filament PLA 0.1mm detail…
Extended the stock Voron v2 spool holder to accept 80mm master spools from Paramount (or anyone else).
Here you can get bookholder for your Skadis pegboard with 20-80mm width. You need to print at least 2 holder for one book, as seen in the picture. The back part of the hook has to be flexed to securely fit on the pegboard. I used PETG…
Bambu Lab Purge Bucket - 80mm - Logo cut out A little bit smaller (only 80mm distance between wall and printer) and with cut out logo. Printed in PLA with support in the cut out. Thanks to @cleberlop for making the original and to…
We have needed some waterproof boxes to install some cables in it. as the shipping time was too long I've decided to print them with 3D printer. First 2 boxes were printed with PLA, should be waterproof. Another attempt will be made with…
Those are great clamps, i'm using it everytime i use my CNC. Enjoy :) Edit: Added a V2 140mm clamp as requested Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 50 Filament: sunlu PLA…
A number 8 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
A number 5 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
A number 0 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
GENERAL INFO The MI50 is a 16GB or 32GB server accelerator card without built in fans. It has a single mini-displayport and can be (relatively) easily flashed to Radeon Pro VII firmware and used in a desktop PC for light gaming or local…
Sharing these files to make it easier for anyone with a small print bed who wants to make one of these roll-up roses. Overall, the model is scaled down 80% with a minor modification to the thickness of the rose petal part. Follow the same…
Why this? The PSU fan on the SV06/SV06 Plus is always on and pretty loud. And despite what the text on the PSU says it is not controlled by the PSU temperature. The solution is to use a quieter fan. Which is easier when the fan is bigger…
A number 4 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
80mm square bin that's 25mm tall.
Tape peg board holder 180mm wide. For 1 by 1-inch peg board. Please see my other pegboard tools and holders in my portfolio. Thanks for your likes and downloads.
[IMPORTANT] THIS MODEL HAS CRITICAL ISSUES! I RECOMMEND PRINTING Sturmtiger tank, modelled to the one in War Thunder (stowage, details, etc. look exactly the same). It has the Raketenwerfer inside it, and the crane is meant to be glued…
I wanted to print the original model on my Prusa MINI, but it wouldn't fit the smaller build plate even when rotated...so I edited the file by chopping off the corners so it would fit! You will still need to rotate the model to fit…
If you don't have spools wider 75mm, then you can use this remix. It has a inner with of 80mm. The original inner with is 100mm, so it saves 20mm of space on the shelf. Also included is an 3mf that fits the whole box on a MK3s+ bed,…
Rain water collector/harvester fitting 80mm pipes with hose attachment
Summary Socket head screw M4x40 or M4x45 -> shorten the hexagon socket screw Front spring -> 0.8x12x40 mm -> is also working for the rear -> more spacers needed Rear spring -> 1.0x12x40 mm I used three spacers for the rear and one for the…
Print settings: Printed with support (I printed it with "normal" support, tree support may also work) Short version may also need supports on the inside 3 walls 20% infill Comes in 3 lengths Includes printable gaskets for better…
Rasengitter für Mähroboter / lawn grid for robot lawn mower Mein Rasenmähroboter macht an manchen Stellen Löcher in die geschlossene Grasfläche. Um das zu verhindern habe ich das Gitter konstruiert. Es kann mit etwas Kraft, abhängig von…
This fan cover with honeycomb pattern is designed for 80mm fans. The mounting holes have a diameter of 3mm. Maybe I'll make other sizes in the future.
Prints fast and with not much material. Holds enough silica to maintain a single spool
Modular Mainboard cover for 60mm / 80mm / 92mm quiet fan - Elegoo Neptune 3 Pro / 4 Pro Board cover consists of two sections - one with standard vents area, second - with mount for 60mm or 80mm fan. If you need to mount fan of another…
Remixed from an already great model, but improved in some key aspects: added front ventilation raised the base so there is some space of both sides of the fan removed the unnecessary restrictions in the airflow path improved the holes for…
I had some 80mm fans lying around to be used in a computer case and I thought I'd make something useful out of them. This is a 12v computer case fan that I soldered a USB boost converter to supply 12v from a 5v USB port. You can cut the…
80mm fan grill 6mm thick, with 4mm clearance between fan and grill. Compatible with regular self tapping screws like used on computers ------ Support me on Patreon ! https://patreon.com/squirrelf3d or buy me a coffee…
80mm fan adapter for most AMD MIXXX series GPUs. There is an optional fan bracket that can used if desired, or the fan can be mounted directly to the plenum. The bracket is designed to be used with m3 heat set inserts for mounting the…
Print in PETG or TPU, the jaws are printed face-down so the gripping surface can match your print bed (use smooth bed for smooth jaws, textured for texture, etc). Geometry was 3D scanned from the tool for precise fit, this should easily…
This is a fan adapter that reduces from 92mm to 80mm and is only 5mm thick. I wanted to install an 80mm PC fan in the rear of a pc case with provision for a 92mm fan, the adapter had to be as thin as possible. And since I only found…
Big boy ( girls ) sized planetary gear. Print in place with 3mf file. Just load it - layer height I recomment 0.2mm but higher also works - and print it :) It can be printed on every printer with a printbed size of 200x200mm. Height is…
Attention: This model can be printed support-free on its head (Flat side down, tube up). After the print you just need to remove the one layer inside the tube. This is a fan funnel for a Noctua 80mm fan which I place in my ikea sideboard…
Neptune 3 Pro / 4 Pro PSU cover with modular fan mount for quiet print. Allows to mount PSU cover with attached door. 40mm/ 60mm / 80mm / 90mm / 120mm fan is mounted outside of PSU which allows larger fan to be attached. Though it…
12mm neodymium magnets, nut M3 DIN 562
Tired of wasted vertical space in your fridge? This stackable organizer box helps you make the most of every shelf. Design highlights: Split into two print-friendly parts — no supports required Optional stacking connector — print only…
Print in ABS with 4 perimeters to make it a solid object.
Front lens cover for Hasselblad Carl Zeiss Planar T* f2.8/80mm FE. I've included the following versions With logo: Can be printed with 0.40 mm nozzel otherwise the logo wont be printed correctly. A layer height of 0.15mm or lower is…
Platte selbst erstellt
What you need electric drill 80mm holesaw Dimensions Diameter: 80mm Height: 50mm Material Material: PLA/PETG Layer height: 0,2mm Support: no Brim: optional Instructions Print the shell, it fits all inserts Drill a 80mm hole to your desk /…