1286 modeli
This is a remix of the PRUSA RC3 Face Shield, in 888 format (the holes are 80-80-80 spaced for a standard 4-hole punch, unlike the 80-60-80 of the original). This version is also reduced in height, with a 8mm tall section for the visor…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple but beautiful wall mount for LEGO set Ferrari 488 GTE: https://www.lego.com/en-dk/product/ferrari-488-gte-af-corse-51-42125 Printed in PETG with 0.6 Nozzle 2 perimeters 20% infill gyroid. Hole though is 6mm while the counterbore…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For use with CTS 288 Rotary knobs with and without button press. The Rotary knobs with button press are MUCH more durable than those without. The spindle for the rotary knobs with button press are .5mm taller and coincidently have a .5mm…
Wydruk około 1,39 €–1,69 € nettoWstępna wycena jednego wariantu
A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…
Wydruk około 3,67 €–4,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I liked @Nebbish's DCC-EX case, but it didn't fit my hardware, since I'm using the EX-Motorshield8874, not the Arduino Motorshield. This adjusts the side ports to fit the 8874. I also found the fit of the microcontroller a bit too loose…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Which collets will fit? 401E (OZ8), DIN 6388A Found in spindles/routers from Kress, AMB, Isel, Mafell, Stepcraft Each position will accept collets with or without nut attached (tested with Kress/AMB nuts) A short type 17mm-spanner will…
Wydruk około 10,13 €–12,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adding to the skadis-system by Petri Damstén - this is a hexbit holder for the Stanley STHT070885 Multibit Screwdriver and nut setter. The hooks were created by Petri - which are required to attach the Stanley hexbit set to the skadis…
Wydruk około 3,82 €–4,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cable Holder for Märklin S88 / L88 with Ebrom H05V-K 0,5 mm² Used screws: 3x16 Spax Filament: Prusament PLA Jet Black Category: Electronics
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
This is a replacement part for a Volkswagen Gold 1998 (Cabrio) We had the original seat grip broken off, it's used to change the drivers seat inclination. As this is my first 3D model I ever made feedback is most welcome. I haven't…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
H0 scale - 188 mm Platform complement (height) - thanks to phildc (3rails.com) To be glued on the previously published here (1222647) low concrete platforms No support needed Complement de 188 mm pour quai de voyageurs (hauteur) - merci à…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Oil filters are only supposed to be hand tightened, so a PLA tool should be strong enough and you shouldn't need a ½" socket wrench. The main purpose of this tool is to keep the oil that remains above the filter from running down your arm…
Wydruk około 3,44 €–4,20 € nettoWstępna wycena jednego wariantu
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. It mounts the module to the drone's rear. Special care was taken to design the mount such that the module sits…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This 3D model is a replacement for the detergent dosing door of the Miele dishwasher combi dosing device C1.11 220-240V 50/60 (part number 5919488). Instead of purchasing the entire dosing unit for €124, you can print this cost-effective…
Wydruk około 4,22 €–5,16 € nettoWstępna wycena jednego wariantu
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. Instead of mounting the module to the drone's rear, the mount moves it to the front. The main purpose is to get…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Ferrari 488 GTE LMGTE Team AF Corse #51
Wydruk około 6,09 €–7,44 € nettoWstępna wycena jednego wariantu
Elenco's AutoScan Fm Radio Kit builds up as a bare PCB, so it needs a little something to help it stay upright. This simple slip stand does that, and needs no fasteners or glue.
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
You will need for assembly: 2-4 studs m3 (10-15 mm) 2-4 nuts m3 3 brass spacers m4 (diameter 6 mm) 3 screws m4 30 mm if your original stand is lost, use this model…
Wydruk około 3,67 €–4,49 € nettoWstępna wycena jednego wariantu
Der Raft, auf dem struckturiertem Federstahlblech geprägt, ist die ideale Oberfläche zum Benetzen mit Geschirrspülmittel, zusätzlichem Speisen einer lang-lebigen dickwandigen Seifenblase während des Blasvorganges und sanfter Entnabelung…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a lid of the small round Vtopmart glass container. Sadly those are not available as a spare part from the OEM, so we made one. The seal from the broken lid fits and it is just as watertight as the original. You can print the clips…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
needed some more space behind a flush mounted led lamp, this is the result. There is 80mm between the lamp mounting holes. The hight of the ring is 15mm and will fitt a 3x2,5mm^2 cabel ment to be mounted on wall. Fits Jula.no Art. nr:…
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
[ IMPORTANT in order for this part to fit, you have to scale it from 100% to 10 % ] This is a spare part for upper basket rear stop, which you can use instead original part, it's cheaper and faster to print, PLA under a dishwasher…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Yes, mini drone motors and DRV8833 motor driver could be superglued together without any help. But that would be always slightly different robot bases. The 3Dprinted part gives motors and motor driver a defined position to superglue to.…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Sleutelhanger van L.A.C. Frisia 1883
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
Low-Profile Speaker Anchor (Desk Mount) for Altec Lansing ADA880 Tired of your speakers slowly drifting across your desk every time the bass hits? Trying to turn them on and sending the speaker into a twirl. This simple, low-profile mount…
Wydruk około 4,41 €–5,39 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Replacement sliders for Beyerdynamic DT 770/880/990 headphones. Yes, you can buy original replacement parts – for an insane price! Also they will break after a short time again because they are just too fragile. This is a remix of…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
Collection of Gridfinity basic cups height 12 (88mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
This is a award medal blank I designed. It is 88mm in diameter and 6mm thick. The recess is 4mm deep, I've found this is plenty to allow for detail on the face of the award. The loop at the top is sized for 1.5 inch ribbon.
“CM3588 NAS Case Desktop Standalone” - pretty much this.
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing The .zip folder includes: -3d Printable Files -Bill of Materials -CAD Files -DXF Files -Renderings…
This is my first design of mount for BN 880 GPS and two sma connector from DJI air unit. Printed in Flexfill 98A with 0,4 nozzle at 0,2 layer height
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 1988 MINI RACER is a mini version of our older 1988 racecar. SIZE / WEIGHT: Total assembly: Roughly 70 x 45 mm Filament: We used roughly 10 g of filament using 5% infill.…
Maqueta del mitico McLaren Honda MP4-4 de 1988 con el que Ayrton Senna ganó su primer mundial de Formula 1.
While "shorty" or “grip only” versions of the Winchester 1887 are somewhat common, the Winchester 1887 was, from the factory, available with full stock. While there were various different styles over time, I chose to model my stock mostly…
For better seating …. V2.1 Small Clamp has been reinforced
Breville / Sage Barrista Grinder Gear. Supported models: Express (BES875) - tested Touch (BES880) - confirmed by others These are not available as a separate spare part from Breville (Sage), but are the first to fail if the grinder gets…
Upload from thingiverse: https://www.thingiverse.com/thing:2946483 Fixed and fully printable
I needed a desiccant container that was both small and strong enough to throw into an ammo can with bulk loose ammo. There are many desiccant containers but most are either too fragile or designed for certain dimensions that did not meet…
I made the original DeSteiner M1887 2 years ago, and recently I revisited it, so why not making a variant with stock and a long barrel? I combined barrel-tube part 2 and 3 so that I don't have to assemble them and to reduce connection…
3d printable pocket hole jig for woodworking, use high infill and thick walls to prevent part from buckling when clamping. You can use 688 Bearings or M8/M10 nuts as the drill guide. If you want to use nuts as drill guides use an High…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
PCO 1881 neck finish standard threaded PET bottle cap. This nozzle works on most soda bottles like Coca-Cola, Mountain Dew, Fanta, etc. Disclaimer: This cap is meant for non-food applications unless manufactured in a material labeled by…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
This model is compatible with the lego system.
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice BOM (on top of the Vulture kit): M3x25mm SHCS qty 7 M3x30mm SHCS qty 2 M3 Nuts qty 9 #4 Screws (3/8" Long) qty 14 5 walls and 99% gyroid for orange parts, 5 walls and…
On my cults page you can download planes like this one on a larger scale and detail, they are for sale for 10 euros https://cults3d.com/es/usuarios/ivangonzalezm/creaci%C3%B3n If you want this larger model and with more detail in 1/48…
This model is compatible with the lego system.
Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2
A wall mount bracket to click-in the Bosch Professional GAL 1880 CV battery charger. There is a channel to support the active air cooling of the charger. Update 19. April 2026: Fits also the BC1880 charger. To take the charger with you,…
Please click if you appreciate my work :) Experience the speed and elegance of Italian automotive design with this detailed Ferrari 488 replica, crafted specifically for 3D printing! This high-quality model combines realistic exterior…
Remix to fit FX888 soldering iron. Uses M3 x 5 brass inserts instead of captive M3 nuts. Requires 2 x M3 12 hex head bolts. Printed in PLA as this is not near the hot parts. It clamps around the part you hold with your hand. If you print…
yoRadio box. More information https://github.com/VaraiTamas/yoRadio.git
This is really well designed, but I needed it to fit my specific space requirements. In the off chance you can't fit the original because it's too deep and the remix I'm remixing from is too shallow, well here you are! Since modifying STL…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
A PCO 1881 bottle cap, fits for most soda bottles and other bottles alike (Coca Cola, Fanta, Mountain Dew, Pepsico, etc. I dont have a printer myself but i used standar tolerances, let me know if it fits well. All feedback is welcome!…
My brother bought this tape machine used and it had a broken Gear C which seams to be a common problem, since there are people selling replacements on ebay. I tried my best to model a replica of the gear and we managed to fix the tape…
This isa model of the IG-11 & IG-88 Droid I have in my collection.
This model is compatible with the lego system.
I needed to make something to attach to a PET bottle and couldn't find a model file to import into FreeCAD. So here's one. The model is not really useful for anything (unless you desperately wish to have a ring screwed on top of your PET…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA The Mercedes Benz No. 1, built in 1886, marks the inception, An iconic vehicle in automotive history's collection. Crafted by Karl Benz, it…
Harley Davidson Sportster 883
Measurements from FriendlyElec 3D Data For mounting in a 10" rack Additional 5050 Fan mount and 16mm power button. M.2 Slots not obstructed! 1U height (44mm height) Designed to be printed upright (front facing down) - should be possible…
⚫ Imperial Dalek 1988 ⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every…
To anyone who cuts their own hair and keeps it shorter than a few millimeters, I can strongly recommend the Remington “indestructible” HC5880 hair trimmer. The “indestructible” attribute only applies to the trimmer itself, not the plastic…
Simple deflector on motto guzzi tank (you have to mirror the other side) cc Daník ;)
Simple wall mount to hang a FTX Tracer RC Car on the wall. Printed in PLA at a 0.28 layer height with 20% gyroid infill Should be compatible with the HBX 16889 RC Car as it is very similar. Potential for compatibility with other 1/16th RC…
VW 807688/c - VW Center Armrest Repair Latch Clip Ersatzgriff für Armlehne diverser Modelle aus dem VW Konzern (VW Golf IV; Skoda Fabia,...). For printing rotate the two clips 90° to position them flat on printbed. 2020-05-29: New version…
This model is compatible with the lego system.
88x88 mm Shelf: Needed a larger shelf to hold a few photography light modifiers. Made this thicker, larger, and stronger then the original shelves.
This model is compatible with the lego system.
This is a strong 3d printed electric motor mount for Chinese 885 and 775 12/24v dc motors. PLA 0.4 print nozzle Nozzle temp 210C Bed temp 60C Standard 0.2 layer height 9 hours to print all 4 pieces at standard settings
The official Cisco part for wall-mounting 8800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
88mm Kwk 36 HE Shell This Shell was used in the Tiger I Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. It has been designed to fit the projectile by AskaLooN…
This model is compatible with the lego system.
You can find the BAHA BUG body here . You do not need to scale it up the 1/18 scale fits as in the pictures. I used 10lb velcro and you need to use it sparingly as it is quite strong. Body: Here Buy me a coffee:…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
About model My custom design of armrest plug for front seats in Volkswagen T4. Made for a friend's Multivan. Compatibility For T4 Multivan / Caravelle / California. Model year: 1996 to 2003. Diameter: 35 mm Modifications I optimised…
Print two brackets, mount them ~14cm apart on the wall. Optionally, if the power cord is not long enough to reach without lifting the power brick, there's a power brick holster which can eliminate the tension on the power cord. See the…
This model is compatible with the lego system.
Holder to attach iPhone to LG monitor (27UN880), the iPhone works as Continuity Camera during video calls.
1988-94 GM c1500 Truck Radio Head Replacement Pocket Based On American International GMP333 Design. I've never printed this. I just designed it in CAD so that I could preview what various OLED screens might look like in the unit and how I…
Little part to fit a plastic bottle to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While a big bottle has a…
This model is compatible with the lego system.
PCO 1881 neck finish standard threaded PET bottle nozzle. This nozzle works on most soda bottles like Coca-Cola, Mountain Dew, Fanta, etc. I have used this for paint applications, and it works well if you open up the hole with an XACTO…
The “real” Volkswagen counterparts to these models have a propensity to spontaneously vanish from the vehicle, due to aging plastics and a harsh, vibration- and wind-heavy environment. I have literally never seen an actively-driven…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Tested on my HSKRC XL Frame (XL9 Arms), which is very close to the iFlight XL7. Standoffs in my case are 5mm (which could differ from the iFlight model), so the holes are tailored to that size. I added a TBS crossfire antenna holder to…
This model is compatible with the lego system.
12g-ammo in two pieces, can be printed in two colors, then glued together. Additional picatinny rail on barrel-grip_back. Several stronger parts.
This model is compatible with the lego system.
I added a new design to the existing box as a cable holder. I added a minimalistic handle to make the lid easier to use.
![Doctor Who - Imperial Dalek [1988]](https://media.printables.com/media/prints/91571/images/7871487_3222b998-93ee-4a4f-a810-50b3e5d2f2cd_18dda337-2035-4968-b9b4-9c14df6878b8/gg2.png)
