2285 modeli
Remix of earlier designed privacy cover. Improvements is that the base/holder fits better on the camera, and the amount of material required is lessened.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
English version, German version below Description: Pictures are a wonderful way to fill empty walls. However, one can quickly get tired of looking at the same picture, not knowing exactly what to hang on the wall, or not wanting to invest…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
For years now I've had a ratty nail going through the magnet to hold my Hue motion sensors in the corner. It not only looks janky, it doesn't stay put very well. Then, I got a 3D printer. i checked out a few models online, but I didn't…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Print Settings 0.4mm 20% infill Support - Touching Build Plate Scale to 10% design is 10:1 to allow for detail. Can be printed with support and face down for quick/draft prints in under 1h, or with support face up for higher quality…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Wall Art silhouette model of the Jeep Wrangler 392 XR. Adjustable size. I accept model suggestions or ideas you have.
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
I was needing to connect a vacuum hose to my table saw to extract wood chips and dust I designed the part in Fusion 360 with a cone to enter the table saw exits and an internal screw thread for the vacuum hose. After several tests I found…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This hanger will hold the Dewalt DCN692N 1st fix framing nail gun printed in PLA can be done with PETG, Nylon, Carbon fibre ect.. depends on your preference with 50% infill and the perimeters at 4
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Backstory: Ever wondered why this OneBlade does not have a case like the 360? Probably for someone to make it. My girlfriend recently bought one and asked me to make her one, so this is the outcome. The case is held clesed wit four 9*4mm…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
During winter fun in the snow, shoes often get wet. That's why I designed and built a 3D printer dryer for two pair of shoes with 12VDC fan 92x92mm and flexible corrugated hose diameter 32mm. Can be used in a car or caravan with 12VDC…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Accurately dimensioned model of the Stanley 1992 blade. The bottom length is 62mm, the trapezoidal height is 19mm. The trapezoid angle is 51 degrees. The notch spacing has also been accurately measured.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
As an Remix from @ebeeche_158366 camera mount, I don't want toremove the foot of my Logitech C930. So I remix the camera arm, that it can hold a camera with tripod hole. Supports are necessary for one side. Please check the original…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you like you can add a color change for the stand to hide it. 0,2mm or 0,16mm No support. No brim. 14 min print. Falls gewünscht, kann man einen Farbwechsel für den Ständer einfügen; dann sieht man den Ständer nicht mehr. 0,2mm oder…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This is massive Thule VeloCompact 926 and 926+1 wallmount, I used 50% infill and 80% around screws. it is quite massive, I know but better safe then sorry :D
Wydruk około 11,35 €–13,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model is designed to fit perfectly behind my "Original Prusa Enlosure - Raspberry Pi Mount with 7" Display" model. For the ball joint, you need: 2x M3 nut 1x M3 16 mm Allen head 1x M3 10 mm Allen head I am using a Logitech C930, it has a…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Got my son and RC car for christmas and he broke a body post so I measured another one and made this. Fits the DEERC 9206E from amazon.
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
EXTRA THICK Headlight adjustment base for various GM vehicles. Some vehicles have worn out adjustment base holes, this will have with some of that. Made these to fit my specific needs on a 1992 Camaro. Printed with Glow-N-Dark ABS,…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
The diameter of the retaining circle is 70.82mm. The fixing holes are 5mm. In the photos I fixed the support temporarily with Patafix / Blu-Tack Print in PLA, 0,15mm, with support
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
We needed something to be able to hold the EFT unit to a charging base but also be easily unmounted, but the ones offered only allowed a more permanent solution. So I designed a base and screen holder to allow such a thing. I made it for…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…
Wydruk około 5,43 €–6,63 € nettoWstępna wycena jednego wariantu
Battery tray bottom for 1982-1992 Camaro and Firebird with battery on Passenger side.
Wydruk około 10,00 €–12,22 € nettoWstępna wycena jednego wariantu
Simple to clip over privacy cover for the Logitech C922 Pro webcam. This print covers full screen unlike others that are smaller. I included a cable guide to keep the wires tidy and out of the way. I printed this in PET with 60% infill,…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed this mount to attach it vertical to the frame of the original prusa enclosure to get a good angle on the printbed. Easy to fix with a bolt and a nut (out of the spare parts in the enclosure kit) to the front frame - see pics. The…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These will fit the WL Toys P929 and any other similar 1/28th scale car from WLtoys. I made them to fit a more scale body to my car, with narrower wheel arches. I printed the wheel in PLA and I am testing variants of the tire with TPU and…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
For Fatshark RCV922 Aviator. Modded to plug in other receivers. Designed a cover for the RX in Fusion360
Wydruk około 0,99 €–1,22 € nettoWstępna wycena jednego wariantu
Náhradní dvířka kazeťáku
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
Náhrada za originalní kryt. SHARP model: GF-9292X
Wydruk około 3,47 €–4,24 € nettoWstępna wycena jednego wariantu
For your consideration is a simple mount for a Logitech C922 webcam for Wanhao Duplicator 6 / Monoprice Maker Ultimate printer (for the printer's left side). The mount fits into the top case slots and allows the camera to hang on the side…
Wydruk około 2,23 €–2,72 € nettoWstępna wycena jednego wariantu
Please check out MichaelQ's original model to get the other files required: https://www.printables.com/model/375059-original-prusa-enclosure-logitech-c920-c930-mount
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print Setting PETG 0.3mm draft
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I lost a pin on my 2003 Kawasaki Prairie 650 and didn't wat to pay for a new one. So I designed and printed this. Its not perfect dimensionally to the OEM but it functions just like it. I printed PETG at .15 layer height with a 0.40…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed mine in PLAHT, with 0,7mm extrusion width (0.4mm nozzle), 0,25mm layer heighth and 3 BOT layers using vase mode. The result needs only a bit filament, is light but sturdy enough and has an opening which fits common coffe spoons.…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Handle for internal freezer from Gorenje RB3092ANW fridge. Recommended to print with white ABS plastic.
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. They are the two midle part in the files. You can fix them together with glue. You can scale the parts as you want but…
Open ended Gridfinity tools racks. 3x3 through 5x6 grid bases with divisions between 7mm - 39mm 56mm total height 2mm walls all around - Strong enough for a toolbox Div widths are rounded down, most are +.5mm of extra space. Material…
**Update V2 in much higher detail. **I guess you can cut it with the new slicer by your own. Porsche GT3 RS detailed silhouette. Easy to print for up to 80cm length (4 parts) on Prusa MK3/4 bed size. Of course you can scale it the size…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
No supports needed for ol' Bats when printing on an FDM printer :)
Flip before printing. No supports required. I used wood screws 4.2x14 to mount the steering wheel. Update 06.04.2025: - added f3d project Category: Video Games
now on makerworld
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
You can now print it on the sloped, upper side to get a much better look! I could reduce the print time and used material by using the shell-command. If you use the textured PEI-sheet, you might get a nice finish on the upper side. So I…
This model is not mainly intended to be a print model, I still included an STL-file, if you want to do it. Its main purpose is to be used for modeling a support for it or when ever you want to use it. You can also use it as a render model.
Credit: https://www.myminifactory.com/users/Ravens
Modular Phone stand for Logitech wheels G29/G27/G25. I used M5 screw with self locking nuts for assembly. The system is modular and adaptable for any smartphone. I use this with simhub dash. Print instructions Category: Video Games…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
Replacement grips for a Beretta M9/92FS Spacer is not required, but may be useful if grip bolts are longer than normal due to original handle thickness.
Model of Columbus caravel Niña - created from plans for wooden model from Amati and optimized for 3d printing. Contains 103 different parts (I see 24 is missing :-)), total number of printed parts may be above 300 (zipped and uploaded in…
Ich bin sehr großer Porsche Fan, und habe zum 24h / 2024 am Nürburgring einen Porsche 911 (992) GT3 2024 erstellt. Ich wünsche Euch viel Spaß und bin auf Eure Makes gespannt. Update Version: Ich habe die Felgen vom Modell getrennt. So das…
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
M9 92 Beretta for rubber band project
How to use the jig: 1) set the slider to the desired thickness 2) set it slightly before the blade 3) move the parallel guide until the wood touches the bearing, then fix it in position 4) perform the cut 5) repeat step 3) and 4)…
Approximately 700mm long model of the MZKT launcher. The model has 8 axles of which the first two are steering and the last 3 are steering on the opposite side, on the back there is the rotation control system. The silo can be held in a…
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties. Post a make :)
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…
Celebrate the legendary Porsche 911 Carrera with this captivating wall art silhouette. Combining timeless design and exhilarating performance, this artwork pays homage to one of the most iconic sports cars in automotive history. The…
I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…
Logitech G923 Xbox F1 wheel
This is a remix of two designs to get the best of both for my DeWalt Table saw with metric nuts and bolts. Following Designs are used: Sliding Block: www.thingiverse.com/thing:3973092 The block was dapted to fit for the DeWalt 7491 & 7492…
Porsche GT3 Cup edition Easy to print . Of course you can scale it the size you want. Easy to print for up to 110cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape…
To assemble you need a M3x8 Screw and an M3 Insert. Update: new File “topRound” for those who wants to try it out. (request from comments) Disassembly instruction: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077
you can print it without supports use some 1.75mm filament for the hinges
Fan mount for passively cooled Nvidia Tesla K40 and P40 GPU's. designed to work with dual GPU's.
I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
A collection of spacers for the most common axial fan sizes. 120, 92, 80, 60, 40 and 30 mm The STL files have the spacer with a height of 100 mm, so you can use the Z-scale in the slicer to give it the exact height in millimeters that you…
WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…
I added a 29mm cigarette lighter hole and a bmw logo on top of Fix3D:s model. You should probably use the original model's slicer settings. I used mostly default settings and the print could have come out better:) The bottoms of the holes…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
Left X-Axis Friction Fit Mount I put together to mount my Logitech C920 on the Ender 3 S1. You should be able to use any webcam that has a standard 1/4" tripod mounting screw insert. You will need to print out a 1/4" screw to mount your…
This model is compatible with the lego system.
The SSUPD Meshlicious fan mount is inspired from chaosmage project. I have optimized the holder to be more stable and is not blocking any airflow. With this fan mount you could improve the VRM and mainboard cooling. Fits perfectly for…
Noctua design fan grill sized for 92mm fans like the Noctua NF-A9
You don't own a Logitech Racing Wheel, unless you've at least come across the brake pedal mod at least once. They are known for having a rubber stop that is often removed for a better braking experience. There are other mods such as…
These extra feet make it possible to mount the Logitech G29 / G920 for a better feeling when gaming with a lower chair setting. Assembly Apply double-sided tape to the positions as shown in the picture below. left: top feet, right: bottom…
This model is compatible with the lego system.
Printable filter for 120 mm fan. Mounting holes are at 105 mm, overall size is 120 mm. 0.7 mm thickness. Printing can be stopped at any layer you prefer. Model doesn't contain the grid. It's infill with 0 top and 0 bottom layers. In my…
This model is compatible with the lego system.
It is very hard to print well because of all of the holes. It took my bambu p1s about 5 tries to get it right. It looks great and was very easy to install because of how ITG Gear designed it. I also used his front cover design and it…
Reupload of a popular wheel mod for Logitech G racing wheels. This includes everything you need to print it and get racing. G920 Tutorial - This is the video I used to figure out how to install the wheel. When reassembling, don't install…
Because I broke my tablesaw insert plate, I needed to design this replacement part. I made it as accurate as possible and in two parts so it fits on the build plate. It is not a ‘zero clearance’ version, but as the pictures show a…
This is a "Slide-to-open" friction-fit webcam cover for the Logitch c922 webcam. It prints in three pieces and "snaps" together. It does not require any glue or other adhesives. It is also sized so that it does not cover the blue…
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
Shut your loud machine up for good. Make your fans Wisper Quiet @ 19.9db Works for all Kobra 2 models This is taller than stock PSU cover you will need taller feet Here a link to some feet that work well Bambu Lab Anti-Vibration Feet List…
Wheel center hub replacement faceplate with Nissan GT-R logo, fits the Logitech G29/G920 wheel. I've added additional layers to the logo should you wish to include a color change (red recommended). Remove the screws on the original center…
Hello, here you can download a steering knob designed for Logitech G29 / G920. These parts are needed: 1x Hex Head Screw M5x35 1x Allen Screw M5x40 1x Thread insert Ruthex RX-M5x9,5
Didn't seem to find a cover for the C920 so made one with inspiration from another user. Recommend using the improved version of the cover which fits better to the camera. Logitech C920 privacy cover improved by siamigo | Download free…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…
I wanted a shifter mod that looked good, stiffened up the shifter, and could also be transformed into a sequential shifter. I took a few of the other designs (links below) on thingiverse and molded it into this. I printed it but it needed…
This model replaces the chrome cap of the BMW coupe E92 extender arm with a hook that grabs the seatbelt successfully much more often than the original design. Designed to be a near perfect fit with the OEM shape. I recommend printing in…
This model is compatible with the lego system.
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
I designed this to replace the ashtray in my 2008 e92, but this should work for any BMW e9X model. This design will hold a Samsung Galaxy S21 with a case measuring 80mm wide. I printed in black ASA at .20mm with Supports. It is best to…
This is an easy to print camera mount for a Logitech C920 (may work for other camera models that have the same bolt size) so it can be mounted from the front of an Ender 3 Pro. PLEASE READ THE PRINT INSTRUCTIONS (SEE BELOW) The camera…
