18 841 modeli
Compact gauge for outer and inner radius 1-20 mm. Printed with Prusament PETG, no supports. Layer hight 0,15 mm (first layer 0,20 mm). You need two M5x30 screws and two M5 lock nuts for assembly. Inspired by…
I saw a few models on here for printable SKADIS pegboard and I love the idea. However, many of the models were dimensioned wrong for my printer or intended purpose. I decided to make a simple to edit, parametric file for generating…
A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D
Screw: diameter: up to 6mm length: 30mm or more
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
Little bit remixed model. See remix diferencies section. Thanks very much to Jaha for his great piece of design in original model and to kisscoool18 for his colored remix. Good job! These remixes can be now complemented by Radius Gauges…
You can use these to gauge radii from 2-25mm, just hold it up to the object and see which indentation fits best :) NOTE: this measures radius, not diameter! Printing: This was designed to be printed with Prusaslicers “0.30mm Draft”…
Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…
What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…
Watch holder for modular Ikea Skadis wall.
I like things that are not permanent, easy to install or remove so i created my own Screwless IKEA SKADIS Wall Mount using 3M Command Large Picture Hanging Strips What you need IKEA SKADIS Board or 3D Printed SKADIS Board 3M Command Large…
A radius gauge for finding the corner radius of items. Can measure radii from 0 to ~100mm. Also included is a quick-reference label that can be printed on a DymoLabel printer, and stuck on. Rename the label file to “.label”, as…
A stand for four small ladies' watches with a bowl for small jewelry in the base. Note: I see that quite a few people use the stand for bigger watches – if that's your plan too, consider scaling the model up considerably. The original…
Battery dispenser for IKEA Skadis Board. Holds up to 11 AA & 11 AAA batteries. There is also version only for AA batteries .
Zum deutschen Originaltext gehts nach unten! -------------------------------------------------------- Push your MMU3 on the next level! You have an original Prusa MMU3? THIS is your musthave! Do you have an MMU but you are annoyed by the…
I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible solution: with this adapter you can mount the board on…
Cut perfect outside radiuses with your router and these templates. I offer several versions with different radiuses. The jigs have integrated T-slots, so you can fix them with fastening clamps like the Festool FSZ 120 or FS-HZ 160 to your…
A small thin radiator bleed key if like me you have no space to reach the valve with a normal square key. I added a 5mm hole for a keychain. If you like check out my other designs too!
These Skadis-like plates were designed starting from the Parametric SKADIS Board Generator by Xuis , and added holes and feet. One measures 200mmx180mm, the other measures 180mmx180mm. I needed to add these boards next to the Printable…
UPDATE! V2 now with fancy brick texture! 🎉 This self-loading dice tower can re-roll your dice by simply pressing the handle. Also works as a regular dice tower. Printing I used regular PLA for this print. No supports are needed, except…
Simple 2 piece holder for hex key set, specifically made for Wera set but probably can be used with many others. This design works with 2 hooks, which is easy to install and remove, but holds very well thanks to the small bumps on the…
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
Nice and easy to print on vase mode with 2 or 3 outer layers (depending on the size) Material - any - we printed it using PLA :) Happy Printing!
A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.
A relatively compact way to store lots of flash drives and SD cards. The top holes are great for full sized flash drives, while the angled slots are perfect for small USB devices such as WiFi & Bluetooth adapters, game controller…
Paint holder for mini paints for the Skadis / Skådis system, three versions that fit either vallejo (or others of the same size), citadel or pro acryl. The dropper bottles (vallejo and pro acryl) fit either standing normally, or upside…
The flat reading bar isolates text on a page so readers can focus on reading one or two lines at a time. This tool can be helpful for those with dyslexia, ADD, and ADHD. Currently, there are two versions of this tool: one with a small…
Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.
Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.
Threading the filament into the buffer is still very awkward for me. You have to remove the segmenter, thread the filament around the roll and then push it up to the MMU, start the loading process of the MMU and then reinstall the…
A Holder for the Xbox Controller for the Skadis pegboard. The 2 Hooks slot into to 2 parallel holes on the Ikea Skadis and hold the controller securely.
Similarly to remix from @ticat_105850 , this remix significantly simplifies the insertion of the filament into the buffer (but uses newer R4 segments). Simply insert the ribbon fully into the cassette, push filament all the way into the…
Thanks Extrutim for the original design! I searched a nice place for the original stand and saw my skadis board... So I added two hooks and ventilation holes. As simple as that.
This is a remix with the universal hooks for the Ikea Skadis pegboards.
Small holder for a wire brush. Not much else to say :)
This is a small, functional radial turbine which uses a 1408 brushless motor. The 3 piece assembly is really easy, just make sure you print case with support. The .3mf file includes already the right settings and paint on supports. Make…
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
8BitDo Pro 2 Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to @lowsc0re for the creation of…
Simple and stable hanger hook. Click fits Stays tightly on place 2cm rail diameter Print instructions PETG is the best, but PLA works great as well. 0.3mm layer height is just fine.
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
This model can show both a radial engine (rotating crankshaft with a stationary body) and a rotary engine (stationary crankshaft with a rotating body).
Minimal remix of @Dingezzz remix of the 1-30mm Radius Gauges by @Restoredoctor. Reduce the filament use of the original model by 52,8% from 225,72 to 106,38 Three prearranged build plates in 3mf and stl format for all tiles with correct…
Created to mount your the Milwaukee PACKOUT bins on the IKEA SKADIS!
A universal radiation shield for various environmental sensors such as temperature, air pressure or humidity. It is recommended to print the radiation shield from PETG or another UV stable material. Print instructions Parts 2x Stainless…
Cockpit Kit: Freewing Models R/C 90mm EDF F-18c Hornet This is a 1/11th scale cockpit kit designed for the 90mm EDF Freewing F-18C Hornet Fighter Jet. Included are the STL Files, a printed parts list, detail photos for painting, assembly…
find the radius of curves by successive tests on the gauge as in the image below : The numbers on the gauge are the radius and range from 2 to 15mm. I recommand to print it in 0,15mm layer height and enable ironing for a better result You…
Create your own traditional Japanese Uchiwa fan with this 3D-optimized design! The Uchiwa is a rigid, flat fan, an icon of Japanese culture, perfect for keeping cool or as a unique decorative piece. This design lets you print a robust and…
Small but handy powder funnel for Luger 9mm and .223 Remmington / 5,56 NATO. Fits resized cases perfectly. Designed to be usable in reloader big hands... ;) Print instructions Category: Tools Print Settings Printer Brand: Prusa Printer:…
A simple outside radius gauge for 1-15mm. Eine einfache Außenradiuslehre für 1-15 mm.
Organize that Skadis! Download these Skadis compatable organizers today, and keep your workspace free of pens and benchies 😉 This design uses the Skadis T-Clip System by Will , you can download the required clips from there! You will need…
UPDATE: New Card Stack uploaded (Update Card Stack closed) . Now little bit higher and closed walls on both sides. Updated Card Stack printed without support and much faster Finally i build a Card Tray that fits my needs. It holds up to…
Protection For Radiomaster BOXER Controller Gimbals
update october 2023: I added new optimized version V2. This works a little bit better for me. Feedback are welcome. I recently got my MMU3. Unfortunately, threading the filament into the buffer is very difficult if you have to hold…
Radioactive Nuclear symbol Fallout. Diameter : 98 mm. 1 mm for the yellow part, 1 mm for the black part.
print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)
The shafts on your radio for these knobs may or may not have little metal clips attached to them (see pic on right), which changes the diameter. Make sure you print the knob with the correct sized hole, either “WITH CLIP” or “NO CLIP”.…
1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…
This is a hook/hanger model designed to fit a popular European radiator model. It was designed for the INCASE DAYPACK backpack. Of course, the hook/holder will work for other backpacks, bags, or any other items you want to hang. In the…
A simple keychain of a running shoe. Modeled using a picture of the Adidas Duramo SL Here is a similar model of a Saucony running shoe that I made. Slicer instructions: The STL has 5 different parts (bodies). You can customize the slicing…
This Skadis rack can hold 2x a 250ml Tamiya X-20a, airbrush cleaner or lacquer thinner container. Inner dimensions are 55mm x 72.5 mm The design was inspired by the Skadis Tamiya Cement etc holder of SoBaldrick…
Inspired by the Valve Index Boomerang Charger and my lack of desk space. Thank you to Valve for sharing their Index CAD files. Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset. The holder…
Stadia Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to Coopey for its contour sketch of the…
ramps fit really good without removing the platform gate and are proven working by my 4year old nephew :-) print twice (mirror one to get both, left and right ramp) originally designed in Catia V5. Unfortunately CATPart files are not…
IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…
The box can be closed with a simple sliding mechanism. I have made 2 different types of latches: Flat ones that are exactly as high as the lid Latches with a small hook, so that they are easier to open. If you love this design and want to…
Removable strong hook to hang something on a Vogel & Noot Type 21 two-layer compact radiator . Update 07.03.2020: Added a slightly stronger version V2.0 with rounded edges. I recommend printing this in a material like ASA, ABS or PETG…
Das ist der Nachfolger (v2) meiner Radiuslehre 01-14mm. Das Problem dass keine 90 Grad Ecken gemessen werden konnten, wurde hier behoben. Die Daten sind für den Druck mit einer .4mm Düse und einer Schichthöhe von .2mm optimiert.
Do you have an empty prusament or other filament box? If the answer is yes, then you already have the field for your eco friendly quarantine foosball. If you wish I can add a goal frame with your name like a did with "Kevinsuisse" It is…
Plastic hammer holder Ø 42 mm Holder for Ikea Skadis
Vent keys for all radiators in your house. Classic key and lever key for to use less force. You can easily hide behind a radiator. Odvzdušňovací klíčky pro všechny radiátory v domě. Klasický klíček i pákový, kde není zapotřebí použití…
Simple stand for holding 9mm Luger rounds during manual reload. Easily modifiable. Print instructions Easy to print, PLA material is suitable as well. In such case, generate new gcode.
This model is a SKADIS holder for Dewalt 20v Batteries. It uses the SKADIS T-Clip system designed by @LineArcLine . It is designed to be easy on and off, bypassing the latch.
Ikea Skadis dice holder. Compatible with RPG dices: d100 d20 d12 d10 d8 d6 d4 There are two versions of this model - with and without D&D logo (see below) Orginal authors: This model is a remix of @Shmoee “ DnD Seven Dice Container with…
Tired of having no way to neatly store and Display your Switch Game Collection ? Then this easy Print is the solution for you. For the whole row you need 4x “SwitchGameStack” and 2x “SwitchGameStackshort” Or if you are using my Print…
Easy print - no supports needed. Gcode prints two as in the picture. I printed it at .15 you you could easily do it at .3. A little bit of CA glue to assemble.
A simple holder for tweezers that only requires 2 slots in a row.
This attachment adds a spool buffer mounting port to the top of the Cassette Buffer. This attachment is made by modifying the official segmenter-R3.stl file. The usual rear attachment port is retained, so you can use either the top or the…
BACKGROUND: The Elecraft KH1 blew up the portable HF radio operating scene when it was released. It covers 5 bands from 40 - 15 m and has an internal ATU and battery. It's actually designed for hand-held use. But with the standard whip…
I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first…
A simple inside radius gauge for 1-15mm. Eine einfache Innenradiuslehre für 1–15 mm.
I created this model so my daughter could store and display her 30+ decks of playing cards. Each holder shelf holds 10 standard-size decks. By my estimation, you can fit at least 8 holders / 80 decks on the 22x22" IKEA Skadis and 4…
I figured this would make a nice display piece and be fun to paint. Instructions: Print it on its side at about a 45 degree angle with supports to reduce the stepping effect.
The UV-5R Radio is a fun item to have around… but it always seems to be falling over. This stand will help keep it upright and stable. The pocket has ribs that engage the battery slots nicely to hold it snugly. You can use 2-sided tape if…
Simple stand for holding .308Win rounds during manual reload. Easily modifiable. Print instructions Infill 15% for 20 rounds, 5% for 50 rounds model.
I designed this over-radiator hook to store this folding clothes drying rack (from IKEA) when not in use. I live in the UK and think my style/brand of radiator is called “Kermi”. I included the Fusion 360 file, if you need to modify to…
I had some real estate left on the Skadis pegboard and 3 spare wireframe skulls by philnelson https://www.thingiverse.com/thing:1388237 Of course i'm going to the mount skulls onto a pegboard! The adaptor is designed to fit the skull…
Please note that this model is outdated and is no longer recommended. It will be kept here for reference. You can download the latest version here
Picture Frame for Trading Cards in Ultra Pro Top Loading Sleeves The slot is just the right size. Slides in just right. Very satisfying. Fits the 3x4 basic sleeves. The tall Sleeves are a bit to wide for this frame. Plus those longer ones…
Had to create Storage for my Pilot Logbooks and Tablet similar stuff.
Simple Hooks for Towel Radiators in your Bathroom. They fit on radiators with 21mm tubes. I added the Fusion360 as it is a nice beginner sketch to learn remixing. PETG is preferred due to better heat stability. It's super easy to print .…
The is a prototype of a wrench used to tighten/loosen the nut on reloading dies. Fits a 1-1/8" nut. This was designed for Lee reloading presses which have a very tight area to fit the wrench. Now that the prototype works/fits I will…
Crulius is a tool for drawing smooth rounded edges on 90° corners. Unlike a standard radius ruler, Crulius extends the ends to a straight line, making it easier to align with a straight edge and add a curve with a specific radius to…
Remixed Radius Gauge 1-20mm , modified to accommodate M5x30mm socket head cap screws and MMU printing. I call my print the “Prusa Edition.” 😜 Print settings are the same as the original, PETG, 0.4mm nozzle, and 0.15mm layer height; with…
Filmová postav Vladimíra Menšíka výška 200mm
I made a new model according to John's towel hook. I narrowed it and added a clip to the bottom to fix it on the radiator. Radiator dims see photos Feel free to use the parametric model (files→ model files→ link to the source files)
I modified Lorenzo Gonzalez's lovely Reloading Die Organizer to work better with my pegboard, plus a couple other minor improvements: Changed the hole spacing to 8", to match US/Canada standard peg board (Lorenzo has a version like this…
Based on whocares333's Sonoff Zigbee 3.0 Dongle Mount. I added two hooks to mount this sideways on a Skadis peg board. Printing needs some supports for the holding brackets and the Skadis hooks.
This is a small weather shield I created for an outdoor temperature/RH/barometric pressure sensor. Prints without supports (upside down). The mounting is designed to fit a common breakout board style used for the BME 280 sensor, though…
