5710 modeli
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Wydruk około 10,61 €–12,96 € nettoWstępna wycena jednego wariantu
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
*UPDATED the screw thread Adjustable self-watering spike for indoor and outdoor use. By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system. By turning the valve you can adjust and control…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I live an an apartment with ancient warped parquet flooring and my Lack based printer enclosure kept wobbling about. I designed these height adjustable feet as a solution! I used 3 perimeters and 20% percent infill at 0.2mm layer height.…
Wydruk około 27,16 €–33,20 € nettoWstępna wycena jednego wariantu
Trying to copy or sketch larger curves and contours? Try my Flexible Contour Duplicator : Lacking the steady hand to sketch the perfect curve? Always starting your curve with confidence only to miss the end mark of the sketch line? Worry…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
YAPH?! (yet another phone holder?!) I needed a phone holder in my car to better read traffic information. This is what I came up with. Mostly as a design challenge since I just started printing, but works pretty well if I may say so. Why…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Just a simple tool to set the correct height of the Pinda or Minda probe. Yes i know this is also the thickness or a simple calbe-tie! But i ran out of those so this little print came to the rescue. Print instructions Just print at 0.2 mm…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
You can now easily adjust your Z. It is a square printed in the center of your Mini or Mini+ build plate. Print it with the stock 0.20mm QUALITY setting. I uploaded the STL and GCode.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This version is a remix from the 2019 original from Thingiverse. https://www.thingiverse.com/thing:2786671/files I made an effort to upgrade and remix it cause I Think this is easy, and far away, the best Y-Tensioner Mod for prusa. Only…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my version of a 3D printed clock. I designed it entirely in Fusion 360 and it has now been running for a couple of months. Time keeping is very accurate. It uses a Nema14 stepper motor, a TMC2208 driver as well as a Wemos D1 mini…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
One issue I kept running into when slicing test stl for Live Adjust Z was that PrusaSlicer has its own strong opinions on which patch to print first. A patch often gets printed at the back of the print bed, and subsequently became…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
I love this tally counter but the fit of the parts out of my printer was too tight for it to operate. I fiddled with my printer a bit, but figured I could use the practice so I traced the models in to Fusion 360 and adjusted the…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adjustable feet for Ikea LACK enclosure. I designed it for my enclosure that has one additional LACK tabletop plate at the bottom. However, you may also use it for the table legs directly. It's equipped with M24 thread that enables to…
Wydruk około 9,00 €–11,00 € nettoWstępna wycena jednego wariantu
Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An easy to print-in-place phone holder/stand with 3 possible angles for the phone. Please note that the STL includes first-layer ‘tabs’ between separate small parts that need to be broken/cut post-print.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally. For very large phones, the movable holder can also be mounted upside down, so that even…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
Würth Adjustable Filament Spool Roller Introducing the Würth Adjustable Filament Spool Roller – When normal Spools are just not enough! Are you looking for a solution that can hold all your Spools? Whether its tiny sample spools or huge…
Wydruk około 7,12 €–8,70 € nettoWstępna wycena jednego wariantu
When I published the 1st version of the Wood chisel sharpening guide I was already thinking about a way to adjust the guide to chisel width without 3D printing and replacing the removable spacers (in orange in the picture below) Design So…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can add tube when you want to hold more tippet spools. Additional tubes are 2types(10mm,15mm) And you can add tube both side of body.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I have included my project files for each of these, but you are welcome to use and/or change them in any way you’d like. All I ask is that if you redistribute them, please mention me as the original creator. If you decide to sell them,…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
The same great SuperPINDA Precision Adjuster for the MK3S+ , now available for your MINI/MINI+! The SuperPINDA Precision Adjuster (SPA) is an integrated mount and adjustment tool for the SuperPINDA probe on your MINI/MINI+. Overview: The…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a 45°/135° angled IKEA Vidga corner piece but IKEA only sells 90°. So I created an OpenSCAD model where you can set any angle you want. Adjust angle and radius in OpenSCAD file Printable with minimal supports. Use brim
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The goal was to enable an easy change of focus while using the exisiting mount system created by Sneaks
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
You might want to look at my recent Adjustable Exhaust v3 Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
How to use: Place your collimator on the jig. Turn on the laser and point it at a distant wall. Rotate the collimator and observe the laser spot. It should ideally not move as the collimator rotates. Adjust the screws on the collimator as…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a DIN mount for my Arduino Uno that was: easy to print quick to assemble adjustable and doesn't need any extra standoffs So I developed my own in OnShape. The clips can be adjusted so that the mount can face in any four…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
It's a remix from https://www.thingiverse.com/thing:3370199 This is a simple snap case print to keep you from burning your fingers on the hot choke coil of the MT3608 voltage boost module. - No additional screws required! - Please note…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
FR: Ce présentoir ou porte livre est idéal pour une bibliothèque ou un salon, afin de présenter les plus beaux ouvrages de votre collection. Il est réglable jusqu'à 5 niveaux, de 33mm à 66mm environ. Les deux rails sur les côtés…
Wydruk około 5,55 €–6,79 € nettoWstępna wycena jednego wariantu
Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Adjustable rope shelf module A small module for an easy hanging shelf on a rope How to use ? You will need a M6 screw for block the rope into the module, you can lose the screw a little for adjusting the position
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This case allows you to (manually) adjust the focus of a Trust Trino HD webcam (available for ~€10 on Amazon ) and mount it on a flat surface, rotatable in one or two axes (tilt or pan and tilt). With this case, the webcam becomes quite…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of Prusa Core One Side Storage by Swing King Design They mentioned that it may be helpful to increase the magnet size, and I had 8x3mm ones handy. This works perfectly for my needs, thought I'd share it with others. I…
Wydruk około 9,10 €–11,12 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: Yes, for holes Support Type: Organic/Tree Supports Print Orientation: Default as modeled Raft: Optional Brim: Optional The fastener…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Webbing Adjuster for securing straps and a g-hook to connect to additional webbing. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is slightly…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When having both the optional “Hinged-Lid” and “Advanced Filtration System” add-on installed, you'll find you have to share 1 connection with both of them. I've adjusted the “Hinged Lid Hinge-Bracket-R” to accommodate “Advanced Filtration…
Wydruk około 8,75 €–10,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Adjustable Corner Drill Guide offers precise drilling for corners. It's parametric, customizable, and prints easily without supports. Features: Fits 1-8mm drill sizes Current files fit 2, 3.25, 5, and 6 10mm spaced holes for accuracy…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
THIS IS A OLD VERSION! new one here ! --------------------------------------------------- Hi all, i was using another Pi Cam mount for my Prusa Mini but it wasn't adjustable so i made one by myself: This is a Raspberry Pi Camera mount…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2021 update: Now that I have used these legs for a while, I can comfortably say they have been keeping my Ikea lack enclosure leveled. You only need to keep spinning the legs until you start to feel some force, and almost every time you…
Wydruk około 4,79 €–5,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
https://www.printables.com/de/model/473483-bikemate-adjustable-bike-light-mount-with-bikemate I would be very happy about a Make, Like or Share! Happy printing!
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
This is one of my early designs of about 4 years ago. I wanted to hold small coils of filament of a limited size range, with easy loading. This was done in Fusion 360 before I learned to use components, so it has separate designs for each…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Large support for perfect stability without adding extra weight. Height is adjustable using pre-drilled holes with m4 screws. For North Americans, the sliding foot can be replaced by a 2 "x2" wooden one, cut to your requirements. The…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use these simple adjustment rings to change the height of your Vanmoof S3s handlebar. I've modeled these closely resembling the original parts of the, now defunct/bankrupt, Vanmoof, in order to keep more bikes on the road. Printing: These…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
check it out in onshape https://cad.onshape.com/documents/e73178ebbfdb86730e018ddb/w/e11b586dee2de4c2fe3c87f5/e/54c837b81a8a0a461d038384
Wydruk około 8,01 €–9,79 € nettoWstępna wycena jednego wariantu
Adjustable spool holder. Stepless / continuous width adjustment from ca. 30mm to 90mm. Assembly according fotos. Stationary parts are fit but glue ir recomended. Additional assembly parts: 1pcs. Screw M4x12 2pcs. Screw M4x16 with…
Wydruk około 3,75 €–4,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adjustable door lifter for installing and lubricating hinges on doors.
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
Wydruk około 4,56 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adjustable grappling hook whose hooks can be adjusted in angle and fixed with an insertable plug. There are thin and slightly larger hooks as well as the step files for your customisations. Print the centre part of the…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Webbing adjuster with a clip point for securing straps or to connect to additional objects. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This strap tension hook allows you to securely tighten a strap by threading it through two lower slots and looping it back. The strap is locked by hanging it on the upper hook, creating tension without the need for a traditional buckle.…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The key holder, if you hate rattling keys this is ideal solution for you. You only need print the “full print model”. For assembly: (seven keys + one keyring) Bolt M3 16mm 3x + Nut M3 3x
Wydruk około 1,32 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommend you print this out of a high temp material ABS, PC, CPE-HT, Etc…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
long: 70 x 55,5 mm screew: 27 mm
Wydruk około 4,12 €–5,03 € nettoWstępna wycena jednego wariantu
Supplement to adjust the width of the bracelet with the shackle from mobiobi. Download the shackle at mobiobi directly. The extension can be printed without support and border. Preferred material is PETG or PC
Wydruk około 0,26 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are several chain link fence camera mounts, but none worked exactly as I wanted, so I created my own. I needed a GoPro mount that I could use to hold my camera on the fence to record and stream my son's little league games. This one…
Wydruk około 5,66 €–6,92 € nettoWstępna wycena jednego wariantu
This is a remix on a bobbin storage box. I initially printed that box, but my wife immediately snapped of the latch. So, I remixed it to use a magnetic latch instead. The hinge pin is just filament. Just press a length of filament through…
Wydruk około 5,63 €–6,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, Today I have Feed Support 50mm for you. Suitable for raising or adjusting the legs of a table, chair, or bench. It can really hold a lot of weight! I used PLA/PETG Basic as the material No need to use supports If you are interested…
Wydruk około 3,58 €–4,37 € nettoWstępna wycena jednego wariantu
Adjustable height endcap for table tenis, DECHATLON PPT 130 OUTDOOR
Wydruk około 7,86 €–9,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Wydruk około 4,07 €–4,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter to use the Kreg KMS7215 Micro-Adjuster with a POWERTEC 71536 Router Table Fence: 1 ¼-20 nut needed: the print is interrupted at 10mm to insert it. Connect the adapter to the fence first, at the left handle, then screw the…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Temperature knob for WÖSAB electric radiator. Since the spare part is no longer available for purchase, I have developed a replacement. It is designed in Fusion 360 and adapted for 3D printing in Prusa Slicer. Printed on Prusa 3iMK2S The…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
Kleine Säule um z.B. im Eingang von Bienenbeutenkästen Wetterschutzvordächer anzubringen als Schutz vor Regen um die Einfluglöcher trocken zu halten. Oder für schmale Unterstützungsprojekte. Zwei Varianten eine mit glatter Oberfläche eine…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
One model, prints in 2 parts. No support required. Creates an eye to eye adjustable replacement for a bicycle rear shock to hold the frame secure from rocker arm contact, and make it easier to move and store the bike during maintenance.…
Wydruk około 3,76 €–4,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
French Door locking pin Manufacture/mode: Giesse 02167 Notes: Used as the top & bottom locking pins for French doors, swing doors, typically exterior doors. You may see this part in Eurotech French Doors. 3D Print Notes: - Material Type:…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple, easy-to-use, easy-to-print convolute or parallel tube roller for 1.5" inner diameter kraft paper tubes. The roller has separate, adjustable guides that make wrapping the paper around the form much easier as well as a…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
I broke the original part. originali it was glued two part. not so perfect for torsional force. I was try to copy the original shape but print in only one body (mixed two part in one body) the rubber o ring it was the original. i dont…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
I made a ACME replacement nut for a Hästens adjustable bed. It should also fits a Maxwell Kbed. Print the model solid otherwise it might not be strong enough.
Wydruk około 3,03 €–3,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you are a developer, and you don't want to hide the proximity sensor with your hand then this extension is for you! Here are the assembly instructions:
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Lets you adjust your leash length. I use this with an auto-braking adjustable leash . (My local park has an 8ft leash limit, and i just couldn't find an 8 ft adjustable leash). I've only tried this with a 30 pound dog, but it's worked…
Wydruk około 3,07 €–3,75 € nettoWstępna wycena jednego wariantu
I find the adjustment knobs to be a little small for my fingers. This tool provides easier adjustment. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Es handelt sich um ein Ersatzteil für die Armlehnenverstellung eines Bürostuhls. Leider ist der Hersteller oder Typ des Stuhls nicht mehr bekannt. Wer das Teil sucht, wird es aber sicher sofort erkennen. Die Platte ist 129,7 mm lang und…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Phone holder allows for fine control of tilt. Probably overkill for some uses, but think this might be useful for video chat or work conferences where you want to get the camera angle just right. Link to adjustment demo GIF:…
It is a simple mechanism that provides column-like support for structures that require it. The support has a dynamic height that can be adjusted in place of use to lock it. To change the support height, fix it with your hand on a surface…
A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required. With the largest base (as shown in the pictures) the clamping…
Update A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me…
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
Closed feet height = 50 mm Extended feet height = 80 mm Tested with PLA: 0,15 layer height; 15% infill => 75+kg load per feet was no problem :)
Lets you drill into something at a specific angle. It's quite small, the guide hole is 8mm. Optional: add an M3 screw to lock it in place. Or else it will just swivel around. Assembly Instructions: see gif
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
Edit 5/18: Changed license to comply with the original Edit 7/4: Added additional folding parts for rigidity and improved clearances. Very thin folding phone stand that can slip into a wallet or the back of a phone case. Works fine with…
This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) Height-Adjustable Feet with Ball Joint — M20×2 Thread (Heavy-Duty, 75 kg Load Tested) These height-adjustable feet are designed for…
Big and strong furniture leg. Its height can be adjusted after installation, from minimum 70mm to almost the double. Needs 4 M6 or M8 screws to be mounted. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No…
I have uploaded a new file with the updated main body, and also a new screw with the file name "screw update." Someone pointed out that they were facing a problem screwing the parts together. Because I only designed half of the part and…
Vertical Laptop Stand Cradle up your laptop vertical and get your desktop neat. Designed for laptops and IPad/Tablets, put two devices on the stand at the same time. Adjustable Model the exported modular stand consists out of the base and…
Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…
This model has been updated with a V2 version that requires M3 hardware! A .STEP file is now also included that you can use as a starting point for custom dovetail add-ons. Thanks to @bequ3 for his comments and improvements ;) I needed a…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…
About This is a funnel for easily filling the Adjustable Spool Holder for Silica Gel / Spool Weight with silica gel. It also fits the hygrometer version of course as it has the same lid dimensions. It was designed so it can be easily be…
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
After seeing many people's problems with my previous fidget switch' s spring, I decided to create a new variant that allows you to adjust the spring's tension whenever you want. Some days you may want a soft, tactile click; other days you…
![Raspberry Pi Camera Adjustable Mount (nozzle view) + X axis strain relief for Prusa Mini - no supports [LEGACY]](https://media.printables.com/media/prints/227703/images/2075843_24d879f2-3462-4f9c-b84c-9b043f0e56f9/img20220618033155.jpg)
