2117 modeli
This is a dagger for Dummy 13. It is about 37x13mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…
Inspired by the Benchmade™ SOCP line of daggers, this pointy-ish defensive tool is not easily knocked out of your hand as you counterattack, gouging the thug's neck and eyeballs and whatnot. See Also Jérémy’s Weaponry Collection
This map was made to cover a blemish in the wallpaper above my desk, and as such is only 17.5cm in width, however this can easily be scaled up in your slicer. The raw data used to make the map prints well, though it has been cleaned up,…
Steam knob for Gaggia Classic pre-2015 model with 6 mm hole with flat side. It is a very tight fit, just push on hard! The flat side is internally reinforced.
Update History: May 21 2021: I have redesigned the tag box: It is now the same size as the plate box, and I made it much sturdier than the previous box. It stacks well with the plate box: April 26 2021: Added tags with clips that you can…
Should fit the following models: Gaggia HD8749/01 - Naviglio HD8749/11 - Naviglio RI8260/01 - Velasca RI8263/01 - Velasca RI9304/01 - Platinum RI9304/11 - Platinum RI9304/21 - Platinum RI9305/01 - Brera RI9305/11 - Brera RI9700/60 -…
No support is required for printing. 0.2 mm layer with 0.4 nozzle. This Owl Woggle Scarf Ring is intended for Brownie Guides leaders affiliated with the WAGGGS association. In Argentina, Brownie leaders are referred to as "Owls," and they…
Easy to use. Slide in the baggie, give a slight twist, and pull! Easy to print. The .bgcode includes a pause at 6.2 mm for a color change. Not dishwasher safe (ask me how I know o.O). Print Settings Printer Brand: Prusa Printer: i3 MK4…
Scarfring or neckerchief based in a "Fire" guide badge (for WAGGGS leaders)
This STL file is a custom-designed bracket for use with the tabletop RPG Daggerheart, created to display "Fear Tokens" on top of a Game Master's screen. The bracket includes oversized recessed holes sized for 6mm magnets, allowing…
The G-code is set to: 0.15mm Quality (modified) 15% infill Brim (with specific exceptions) Each part was scaled down to 65%
A heavy-duty scoop designed for quickly transferring rice, grains, beans, cereal, seeds, pet food, and other dry goods from bulk containers into smaller bags. The deep body holds plenty of material, while the sloped opening and rounded…
This is an alternative housing and placement of the Nextion24 LCD screen used for Nextion based Gaggiuino. The housing has an an opening for the SD card slot at the bottom and attaches to the cup warmer plate by magnet. The two small…
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…
A historic Sikh Weapon Katar Push Dagger designed in Fusion 360 not an accurate model with the rounded handles, just a simple extrusion of the 2D outline will work on this in more finer detail in the near future
Here's a neckerchief slide with the logo of the 'Pimpillitos' branch from AGA (Argentine Girl Guides Association), a part of WAGGGS (including Girl Scouts). The Pimpollos are the youngest branch in the movement, made up of 5 and…
Pegs and Jokers is a "race" game played with pegs or marbles, playing cards with Jokers included, and a board containing start and home areas for each player. It is based on an Indian game, Pachisi, with widely popular variations known as…
Hey there! Check out this Guide woggle inspired by the Clover AGA logo. In case you're not familiar, this Clover symbolizes all AGA (Argentine Girl Guides Association) guides. I've made all the necessary tweaks, so no supports are needed.…
Vor- und Nachteile auf einen Blick: + Verkleinerung/ Kompakter (45 cm x 35 cm x 20 cm) + bessere stabilität der z-Achse + schneller Ab- und Aufbau (Montagehilfe) + einfacherer Ab- und Aufbau ohne Werkzeug + weiterverwendung der…
This device can be used to retrieve a Disc Golf disc that has landed in water, a tree or other difficult to access location. It has a ramped front on the jaws to allow it to easily slide under the disc. Once the disc taps the flappers the…
It's just a very simple connection piece to make it easier to get the ground coffee from the Niche Zero cup into the Cafelat Robot or Gaggia Classic basket.
Porta sapone da viaggio. Soap Holder
This is my personal use for STAGG music stand. I created this monitor stand for use with my mouse stand on my Roland TD-25.I fixed the lower screen bracket with 2 screws and 2 holes for each. I use 2 screws M05 x 20 and 2 nuts M5 to fix…
About OpenSCAD designed and customizable print sheet holder. Supports any print sheet size (max 2mm thickness). Support 1 to 25 (or more) print sheets. Screw and HSW mountable. HSW orientation for horizontal and vertical sheet loading.…
This will snap into most sliding door handles to provide a pathway for curtain rollers to not snag onto the edge of the sliding door handle coming down or up. You can adjust the height in Cura/other software to fit the height of your door…
Multicolor Raggedy Andy Created in Fusion 360. Each color has a difference of 0.6 height Can be made into a yard sign or a wallart
This model was made specifically for the Home Depot flagging tape rolls. They are 1 inch tall by about 4.75 inches wide and a hub of about 1.4 inches. This may work for other rolls but of course measure first. This can be carried by hand…
A compact vertical wall rack for five spincast combos. Alternate rods sit 120 mm higher on narrow pillars, so neighboring reels and cranks sit at different heights and don't collide. That lets five rods fit on a rack only 244 mm wide,…
This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
Meet the ultimate “Highland Cow” : big horns, bigger fluff, and a fringe so long it’s practically a privacy policy. This chunky, seated Highland cow is sculpted with flowing fur, a boopable snoot, and soft, rounded hooves—perfect as…
Wall Mount Quick fastening system for panels and coverings - Sistema universale di Fissaggio rapido a Pressione Available in two models: Wms_1 - Wms_3 Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements…
A Minimalist Skeletonized Dagger. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or 78.5% 6 16.5 0.825…
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…
Update 16/3/2025: Each model is now labeled with its size! Insulation Cutting Tool – Perfect for Plumbing Projects This versatile insulation cutting tool is available in 11 sizes, ideal for different plumbing needs. The sizes range from…
There is one main screen housing design, multiple mounting options. The Front mount is compact and needs fewer parts but is at a fixed angle and can be low for taller people. The Rear mount takes up more space and uses more parts, but the…
This assembly is for adding scales to your Gaggia Classic or Gaggia Classic Pro. Compatible with two HX711 boards or Vas' dual HX711 board. Requires 750 g load cells. Please use the assembly instructions at gaggiuino.github.io…
Notes: If you want to use this with an Arduino Nano build in a Gaggia Classic, please also print the Gaggiuino Optocoupler Case There are now two accessory parts: A stripboard mount and cable strain relief (see changelog). The stripboard…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
One of the biggest annoying issues with the Creality K1 is the sagging cable chain. Several people have already proposed different solutions, but so far no one has tried to correct the chain itself, which is the source of the problem. But…
Status: Released! Compatibility Warning! PCBv3.1 and PCBv4 (with onboard STM32 chip) are the only compatible PCBs. PCBv3 (which uses the WeAct BlackPill) is not compatible and should use the Protective Housing . Description This housing…
This tool is to cut insulation from copper pipes , for plumbing inner diameter is 50mm, 40mm or 60mm, others on demands. https://youtu.be/nSeCnuHCYws?si=GxC4OOZlfjOlId0S
With this jig you're able to cut insulation made from PE or PU in 45° angles. The model in the picture is made for 50mm insulations, although it looks a bit wide (the insulation seems to be smaller than indicated). But I also added…
This housing holds the GaggiaBoard V3 (PCBv3, PCBv3.1, or PCBv4) from the Gaggiuino project, with maximum coverage to protect from a potential water leak. Design intent is for the board/housing to go in the corner vertically behind the…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This drain snake was created to have extra long barbs to help grab all that stubborn hair that can get caught in the drain. PLEASE NOTE: you need to have a drain opening that is greater than 4x12mm in order for this snake to fit in your…
This housing is designed to hold the Time of Flight and LED (ToFnLED) board for Gaggiuino over the water tank using magnets. The board slides in from the end, clipping in with the flex arm clip. If the board needs to be removed it can be…
Someone requested a customizable collapsible sword - and here is my take on that topic. I decided to print a wand, but you can choose a more sword-like shape. Collapsed length, number and thickness of segments - your choice also affects…
A single finger knuckle duster that has a dagger blade attached. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5…
Handy box cutter or decorative mini daggers - only 4 grams of material
Slim Drip Tray for Gaggia Classic that fits where the normal drip tray does. This adds enough room for a scale to fit underneath Also added a version with rounded edges for easier printing
This collapsing sword is designed to be printed as one part. The replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
I liked all the dice daggers that I've seen on etsy and elsewhere and I thought I'd bone up on my fusion skills and see what I could come up with. Ultimately I wanted the dagger/sword to look like something a nobleman would carry. For…
This is the Ebony Dagger from Skyrim. The measurements seem accurate, but it is a little small, so you might want to scale it up a bit. UPDATE- I have remade the 3d printing files to fix some issues and make them easier to print.
This is a remix of the lovely "Ebony Dagger (Skyrim)" model by Shadowcraft. Thanks, Shadowcraft! I have made the following changes to the original: Scaled up the dagger so that overall length is now about 40 cm. Trimmed the base of the…
Aufbewahrungsbox Küchen für Maggi, Knorr oder ähnliche Tüten. Die Box hat standardmäßig eine Breite von 17cm. Kann aber einfach mit dem Slicer deiner Wahl herunterskaliert werden auf die gewünschte Breite. :) 13cm breite für große Tüten…
A pair of small Daggers with different grip designs. If there are any knife designs or other tools or cosplay props you would like to see, please message me an image and i will design it.
This is an ol time baggage train cart designed for the H0 scale (1:87). The model is just the top part of the cart. The chassis (the ram) is from "Old railway passenger wagon in scale H0 by UTJTrain, published Nov 8, 2015"…
Originally published here: Earth with exaggerated topography scaled one in sixty million by tato_713 - Thingiverse These models were made using MATLAB R2016a with a topographical map of the Earth, including the seafloor. Like other models…
A 3D printed strategy board game for up to four players. Game tokens for this model are compatible with Four-in-a-Row . How to Play Players take turns adding two tokens with their assigned color(s) into the board to create chains of their…
REMIX Skeletonized Dagger two side
This is a simple shield to prevent dust, debris, coffee splatter, etc. from entering the Gaggia Classic / Pro / Evo water tank. As a result, the water stays fresher for longer and biofilm takes longer to build up. There are 3 variants.…
[UPDATE] 3/29/23 - Adjusted sheath to fit the blade properly.
Daggers and Short Swords Set Hey maker! 👋 A complete set of daggers and short swords for your collection or display. Features: Designed in halves for easier printing – print one half, mirror it, then glue together. Scale the dagger to fit…
Print two times this half with two connectors and than glue them together :-)
Skull Dagger The dagger can also be hung. It has a hole in the handle.
This model is compatible with the lego system.
Joker's weapon from Persona 5 and Smash Bros. The scale is kinda weird because it differs depending on the game (Smash or P5). DO NOT PRINT THE pegv2.stl™ AS IS UNLESS YOUR PRINTER HAS 0.00000... TOLERANCE!!! SCALE THEM DOWN! I might…
Made this in a span of 2 days for a friend, it still needs tweaking here and there but it's good enough for printing I think. The sheath might need some foam or something inside to work best. Set scale to around 800% in each part, the…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Modeled these up, they take 3/8 rods down the center(I used a threaded rod left over from my printer build). Be sure to post a make! Category: Props
This is my version of a hose guide system, designed to print in two separate pieces. I wanted to avoid using any hardware because, realistically, I would probably forget to remove it at some point and end up destroying it. So I decided to…
Just a simple wall mount for blades of varying sizes.
This is a remix of the portafilter holder designed by teky929rr for the Gaggia Classic Pro espresso machine (base model found on Thingiverse ). The original design has been changed to be more stable, and includes a wider top clip and a…
A 3D Model of a skull necklace Dagger.
printed in PLA 0.25mm 4 bottom and top layers
I wanted and improved fan duct that does not interfere with the Waggster Mod for BLTouch. Combined the two in Tinkercad. Credits should go to the creators of the original desigs. Print instructions Unassociated tags: Sidewinder X1,…
I designed this because i wanted something that look similar to my Eureka Mignon single dose hopper grabbed from here: https://www.thingiverse.com/thing:4703218 Added coffee beans looks like holes for some fancy look :) Printed with ASA,…
While many of my Gaggia-related models are specifically designed for the Gaggiuino project, this one is not. People requested a standalone version of my low-profile scales drip tray from the Gaggia Classic | Pro Scales , so here it is!…
May the Fourth Be With You! Introducing a kit card version of the TIE/dg Starfighter (also known as the TIE Dagger, or the Sith TIE Figher. Individual parts are included so you can print the model without the sprue to save plastic if…
Trainingsdolch für Force on Force Training. /Training dagger for force on force training. Gedruckt mit 100% Infill / Print with 100% Infill Gcode für Trainingsdolch mit text . Modell ohne text ebenfalls angehängt / Gcode for…
This lever adapter for the Gaggia Classic Pro espresso machine slips over the existing steam knob. The Idea is to not disassemble the existing one. I printed it with PETG, because it has a little bit more thermal resistance, is a bit…
The blades don't last long in the hands of a 6 year old, but with a little modification the blades are now removable! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 mm Filament: Doesn't Matter…
Wall Mount - Side fastening system with security clip - Sistema di aggancio laterale per pannelli Recommended Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements All our designs are free to download and…
Model directly from the game. Can be cut up to make it easier to print
Warning - I'm hearing reports that Gaggia has recently changed the pump area screw locations, so if you have a 2026 or later E24 the holes may not match up. 2024-07-02 - New Alpha rev, note that instructions are not complete: Same base…
This tabletop funnel lets you bag or sort small items. Slide it onto your table edge, make small piles of items (or maybe create a sorting tray with one open side), and then slide a desired number of items along the tabletop onto the…
I have created this printable maggot model for use as fishing bait or just for good old-fashioned pranks. Printable with filament or resin. A flexible material is probably best to use. The printed model is about 22.5mm long by 8.9mm tall…
I designed the dagger to be somewhat true to the in-game scale, but as I have large hands I printed it at 110% to make the grip a bit more comfortable. Shows up better in pictures, too. I've broken the model up into a couple of…
Two models included. Full build and 2 parts with an 8mm dowel. you can print one or use a wooden dowel. I recommend printing separately without supports.
Minimalistic tamping station for the Gaggia Classic portafilter. This is an improved version of Jason's design, with more space for the portafilter and rounded corners at the handle cutout.
This is a remix of the collapsing dagger with the change of adding my initials to the handle. I attached the OpenSCAD script that references the original file dagger.stl. This file needs to be in the same folder as the script.
Wall mount clamp /bracket / holder for 2020 Alu Profile - Fissaggio a muro per profilo 2020 Update: 04/02/2025 added - Wall Mount Clamp for 2020 Alu Profile_Cover.stl Suitable for:…
![Foldable [PMFC] Prusa Mini Fast Compact Mobil Transport Assembling Mod/Kit/Addon for hand baggage](https://media.printables.com/media/prints/136275/images/1299962_76a63b45-4b6d-40e0-b4e5-a0495be4773b/img_20211208_181711_578.jpg)
