Liczymy pasujące modele…
Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
If you're looking for a replacement protective battery cover this is it. Print settings: Printed in PLA, .6/.4mm nozzle, .2mm layer height. Will print solid with a .6 or a .4mm nozzle if printed with 2 walls and at least 3 top/bottom…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Canon hotshoe - Action camera mount (GoPro, Insta360,...)
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
I was after a grid for my Canon 580 EXII speedlight, but none of the ones I could buy really appealed to me. They all seem a bit “clunky”, held together with magnets, rubber bands or Velcro. I figured there had to be a neater way. These…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
A rear lens cover for Canon Lenses. If printing on an FDM printer, the Canon logo should be on top. You may want some support material to support the rear side of the internal flat surface. 0.15 mm layer height is ideal. No support…
Wydruk około 1,59 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Backshell for Canon 25 connector (LPT, COM, etc). Krytka pro konektor typu Canon 25. Print instructions Backshell for connector Canon 25 (DB25). Used for LPT or COM - 25. Three versions, for cables: ø = 5 mm ø = 7 mm ø = 9 mm Fasten…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Border fixed manually, point by point. Total surface 10500 Km2 → 99% accurate. Z exaggerated x3.
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
Box to store the ink role of Canon SELPHY photo printers. I have two different rolls for different paper formats, so i needed something practical to store and transport the roll which is currently not in use. Designed this little box for…
Wydruk około 4,75 €–5,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The STL file does not have the text on it. The gcode has (using prucaslicer).
Wydruk około 0,78 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Canon Fd mount cover cap to protect your lens mount. Works with interlocing lens mechanism.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Supporto disegnato per Obiettivo Canon EF 75-300, originale introvabile sul mercato, compatibili mal funzionanti e ed estremamente costosi. Difetto: Viene coperta la possibilità di passare dalla Messa a Fuoco Automatica a quella Manuale…
Wydruk około 2,67 €–3,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bahtinov mask for Canon EF 100-400mm f/4.5-5.6L IS II USM
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted some protection for my spare LP-E12 Battery (Canon EOS M50). Inspired by the case of @tomschoenlau I made a modification of his “Battery cover Canon LP-E17”. Tested with an original Canon LP-E12 and a hähnel HL-E12 (printed at…
Wydruk około 1,59 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This bracket allows you to mount the Canon CP1500 photo printer on a standard speaker stand. It is designed to attach the CP1500 holder from Benjamin Kott to a 35mm speaker stand. In combination, the whole thing is then ideal for a photo…
Wydruk około 8,52 €–10,41 € nettoWstępna wycena jednego wariantu
I bought a used Sigma 70-300mm lens from a garage sale ages ago. It had some issues with the autofocus system randomly binding up. Ended up taking it apart and finding a small gear had a few teeth stripped off. I printed this gear with a…
Wydruk około 3,12 €–3,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PETG Düse 0,4 Layer 0,2
Wydruk około 2,05 €–2,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Auf dem Markt habe ich keinen Cage für die Canon PowerShot G5Xii gefunden. Also hier nun meine Kreation. Die Kamera wird mit einer Schraube an ihrem Stativgewinde im Rahmen befestigt. Ich verwende diese:…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Whether the dog chewed your lens cap, or it fell off a cliff during that last hike, the solution is one print away. Recommendations: Print Material: PLA Infill Percent: 15% Layer height: .15 (a layer height greater than .15 will not work…
Hot shoe cover designed to fit Canon EOS cameras perfectly. A variant better suited for Canon FD cameras can be found here . Print Settings Resolution: 0.1 mm Infill: 100%
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
Added more sizes to Wojtek's LP-E6 battery holder. Should be able to print without any supports in the provided orientation.
A lens hood for Canon EF 50mm f1.8 STM lenses. Can be used both as as hood and as a protective case. Print Settings Resolution: 0.1mm Infill: 100%
Overengineered rear lens cap for Canon EOS RF lenses. Missing the align notch and stopper. Print instructions Print .1 or 0.2 mm P.S. Donations welcome, my cat keeps chomping the filament.
This is a printable model of the mount found on Canon EF/EF-S lenses, which you can use to design accessories like extension tubes or custom lenses. Print at 0.1mm layer height, in PETG (recommended) or another filament like PLA. This is…
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
🇱🇧 اهلا بك في لبنان Welcome to Lebanon! This model was created by Dany Sánchez . This is available in two versions: Actual state (ruins) Hypothetical reconstruction (just this section, not the whole complex) The Temple of Jupiter situated…
This is a Lens Hood for a 58 mm Canon EOS Lens. Suitable for a focal length from circa 18mm
Proper clearance, lens orientation and flange focal distance. Tested with Helios 44M-4 and Beroflex 135mm F2.8.
Rear lens cap to suit Canon EF and EF-S lenses. Print Settings Supports: No Resolution: 0.2mm Infill: 100% Filament: Plasty Mladeč PLA Black Slicing settings: Perimeters: 2 Seam position: Random The cap has three internal flanges which…
T-ring adaptors for 2" and 1.25", should work on any telescope. The adaptor if of the EF type, it should work on any Canon EOS cameras.
This is a printable body cap for FD mount Canon cameras, such as the T50, T70, T90, F1, A1, AE1 and others… I modeled this cap after an existing cap. The print is not quite so simple, as the guides for the bayonet catch have a slope. I…
Adapts Canon EF/ EF-S lenses to Sony E-Mount bodies. That is all, no lock, no frills.
Vase MANON has a spherical design with a bold geometric texture. The diamond-shaped facets create a beautiful depth effect and subtle shadow gradients that shift with the light. Turn the vase a quarter and it looks different. That makes…
Update Feb25: Thanks for almost 300 downloads! Full Step Files available for Purchase from my Printables Store Here - perfect for alteration and customization. Free STL Files for 3D Printing below: Set of Modular Lens Cases, Protection…
### UPDATE! Now the text is in correct horizontal orientation Hi, this is a cap/cover for Canon's camera body with mount ef / ef-s Print settings: Layer height: Any, I used 0,2mm Material: Any, I used PETG Supports: Yes, only on build…
This is a hood for Canon kit lens. Three models are included, rounded hood, petal hood and a base that you can use to design your own model. f3d file is included.
A convenient way to store up to 5 Canon LP-E6-style batteries on a 1x3 Gridfinity plate. Related model for the LP-EC Canon Charger .
We have templates for both male and female pairs of the RF mount. They fit my camera and lenses without further modification. Having done this, I belive it is possible to have a mount that fits both RF and EF - you just have to cut a bit…
A connector piece between your Canon camera and your tripod. Incase you loose it or if you need a replacement piece. Made in Fusion 360
Main features: Stairstep pattern on the inside to further reduce flaring (mimics the original, was a pain to model) Clicks when fully twisted onto the lens Can be put on backward for storage and trasport Has the same markings for…
Thanks to the linked makers I was able to merge them and to create this EF to M42 lens adapter. It works well for me but it is possible to improve it. If you printed the design you have to drill a hole at the spot where a camera lens…
The Canon EFS 18-135 Lens is a very good lens, but it does not come with a hood. I tried several different models that others had posted, but none seemed to fit the bill, so I made my own. This model is reversable so it will store well.…
Remix of "A hot shoe cover designed to fit Canon EOS cameras perfectly." by JP that does not block internal flash.
With these files you can now directly attach your camera as a normal observational eyepiece, just tighten them in your 1.25" or 2" eyepiece holder. NOTE: If it doesn´t fit well for your telescope, maybe you can play with the tolerance of…
A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. The stepped inner surface improves light-blocking performance. Compatibility This…
This part is designed to be printable without any support material. A well adjusted printer is necessary fo a tight fit. Extension tubes are mainly used to reduce the focus distance of a lens for macro photo. The sample photos are taken…
The newest version of my Lens Cap Holders. Now with more supported filter diameters. The following diameters are supported: Canon: 49mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon: 52mm/55mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon (extended):…
This is a high-quality fanart 3D model of the iconic Guy Fawkes mask – perfect for cosplay, parties, protests, or just as a cool decorative piece. Designed with detail and wearable comfort in mind. ⚙ The mask features side holes for…
This is a fully printed canon RF body to EF lens Tilt adapter. It allows you to create the “tilt shift” effect with any EF lens. It will also work with any EF body to other lens adapters, I've personally used Nikon F mount, Olympus OM…
I designed the fit to be perfect when printed in Prusament PETG, I haven't tried Prusament PLA or other filaments (yet). The battery type “LP-E17” is embossed on one side. On the other side the same is done in Braille.
This is a rear lens cap that fits Canon EF and RF series lens. Print with supports enabled for the benefit of the three screw segments (I'm not sure what to call them).
Edit 06/07/25: Added smooth versions of the grip without the finger slots and uploaded the fusion360 files to make life easier for anyone that wants to remix, I didn't realize in all this time that I didn't upload it :( Post your make if…
fits well on my canon 80D but it should be compatible with all these too - 450D 500D 550D 600D 650D 700D 750D 760D 800D 77D 100D 1000D 1100D 1300D, EF Rebel T6s T6i T6 T5i T5 T4i T3i T3 T2i and more printed in one piece with PET-G (for…
I added alternative lever that uses M2x5mm (or longer cut to size) screw as a locking pin, it may scratch your lenses but is stronger and more reliable. To secure the screw in the lever you can use some leftover plastic from…
Canon FD to RF adapter. Printed in two parts. Wet sand with 400 grit so that you get exactly 22mm height. 3x10mm M2 screws and glue in place when all fits well. Printed in CF-PETG (Atomic filament). 3 perimeter 5 bottom and 7 top layers…
The Wind Waker Ganondorf has always been my favorite of his various designs. This is a hefty print, so it's probably worth hollowing out. The Base is intended for printing on an FDM printer at .2 layer height or less for best results. An…
Hi there. Here you are! An Mario Style piggy bank with a canon on top, inspired by Nintendo's WII Super Mario Bros. Level-Canon. The canon can be rotated and tilted. The piggy bank is also available in smaller scale, adjusted for IKEA…
An easy-to-print rear lens cap for Canon EF or EF-S lenses with Canon logo and orienation mark. I tried several models, this fits very well and looks pretty much like an original cap. Prints well in either orientation. Tip: If you happen…
A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. Check out our growing collection of 3D printable designs for Photography ! Follow us…
preferable to print with the EF side down.
The sun protection (lens hood) for Canon 50mm and 18 - 55mm Classical lenses have 3 hooks for conection, this thing has only 2 hooks for conection You may also liked some of these projects: https://wivry.gumroad.com…
Please give a like a follow me! I make a lot of Zelda models. If you make it, please post your make! And if you have any issues, just let me know.
This is a cover for canons LP-E17 batteries. It should fit batteries for EOS RP EOS M6 Mark II EOS 850D EOS 250D EOS 200D EOS M6 EOS M3 EOS 760D EOS M5 EOS 750D EOS 800D EOS 77D Please see also my GoPro 9 or 10 batterie cover .
This is a replacement part for the film door latch of the Canon EOS 50/50e. It is modelled after the original part that broke (view images). I printed it in PLA. Might need some sanding afterwards because it is a very thin part and can…
Couldn't find any decent Canon EFS 55-250mm lens hoods that actually fit and locked, so. I made this. It may have to be scaled how you see fit, but it fits for me and it works. So, I'll share it lol I printed it with Prusament petg and no…
This is a simple tube extension for the Canon EF and EF-S lens mount. The length of the tube can be changed with a Fusion360 parameter. The Fusion360 project also makes use of the ParametricText addon to emboss the text on the side. The…
This was my first ever attempt at designing in Fusion 360. Further tweaks may be required to be a perfect 1:1 replica - but it does work.
This is a rear lens cap designed to fit the Canon RF mount in three positions. The cap fits standard lenses as well as weather sealed L lenses. It also fits EF lenses. I have included svgs to label the caps so you can quickly see what…
Beschreibung Diese Gegenlichtblende, welche auf das Objektiv mit Bajonettverschluss montiert wird verringert Streulicht Print Settings Printer: Prusa MK4 Supports: No Resolution: 0.2mm Filament: PETG black Update: 20260730 - Update…
An intimidating Ganondorf Bust from Tears of the Kingdom. If you print this, please post your make! And if you like this, please give it a like and follow me to see more. (Needs supports)
A local AA group asked for an Alcoholics Anonymous sign, i made the logo and a "We are not a Glum Lot" for all my friends of Bill W. Print instructions Category: Signs & Logos
I love loosing small things, that's why I often have to rebuy stuff. But not anymore since I got my printer… This model sits very tight onto the camera, so there is no way of loosing it again. Printing instructions -print it upside down…
This is a mini version of the canon from ClashRoyale which can be used to shoot low range objectives. With the only need of a pen spring and a BB you would be abble to have fun shooting whatever you want. Not a powerful gun but it could…
Canon Lens Hood designed for a cheap Replacement for ET-74B REPLACEMENT FOR : ET-75B https://www.amazon.com/-/en/LH-74B/dp/B06XSJ3FT4 PROOFED TO BE COMPATIBLE WITH: RF 100-400mm F5.6-8 is USM…
I recently bought a second hand Canon Selphy CP900 Photo printer, but it came without a paper cassette. Looking on Ebay revealed that if I could find one it would cost more than i paid for the printer! I couldn't find one on Thingiverse ,…
Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is a printer friendly customizable Canon EF mount design with a f3d file. On its own there is no practical use case for the part, but possible modifications could be: adding threads to the inside or outside to mount your camera to a…
Extension Grip for Canon EOS R7 Suitable bolt: Hex head UNC ¼" x ¾" Tested with 100% infill and “stiff” PLA
A lens hood for Canon RF 100-400mm F5.6-8 IS USM. It's length is 60 mm, and it has an integrated deflection spring lock to prevent it from detaching from the lens. Allows for usage of original lens cap. For best print quality, I advice…
This model is split into two pieces for easier printing. After printing, the small back piece should be glued into the recess. The finished grip is held in place with a M3x8 screw.
Slide duplicator for Canon lens with a reverse ring. It can transfert 24x36mm slides on a 50x50mm frame. I use it on my Canon 50mm f/1.8 EF lens. For the assembly, you'll need: 6 M3x8 bolts + nuts 1 or 2 M3x10 bolts + female threaded…
A quick-release clip for the strap that came with the Canon EOS M50. Just push/pull the clip against the metal fixture facing the gap. I recommend printing in PETG or similar at 100% infill, 3 perimeters. The print orientation makes them…
Cap for Canon FD style lenses (https://en.wikipedia.org/wiki/Canon_FD_lens_mount). This covers the LENS part of the FD mount, NOT the camera body mount. There were other models for this on Printables but none I saw had appropriate tab…
All new model with some tight tolerances. You'll need some two core wire, a couple of cable ties and pins for the trigger, winglets, and breach pin. Add a small spring to the trigger and a tiny bit of compressible foam to the breach pin…
I remixed rogersoh holder to have a smaller version of it Category: Camera
This model should allow you to convert your old Canon FD lenses to the more modern EF mount. This model has been specifically created for Canon FD 135mm f/2.5, and may need further adjustments if you wish to convert a different kind of…
Easy to print. Has no internal threads, so it might be a bit difficult to screw in the first filter
Canon lens cover holder for 52mm and 58mm Print instructions Print it in 0,1 resolution. No supports are needed.
J'ai utilisé le model sur Thingiverse 8cm PAW-600, par Julian-Silvestri
Perfect and secure fit. Correct focal length. Easy to print. Supports are only needed for "Canon side" clips. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament:…
A great Wall Art of Anonymous. Do not forget to upload your makes, thanks ! Inspired by a sticker
Hi, I was in need for a few lens caps and as I didn't have any I modelled them. And after few iterations I got them working quite well. Enjoy and protect your lenses! Cap is a print-in-place model, so a good tolerance is needed Supports:…
A 2x3 Gridfinity-compatible LC-E6 organizer. I also put “LP-E6” text below the charger to help identify what kind of battery it charges. The model has cutouts to make the charger easy to grab from the top or sides. Related model for…
Due to popular demand here is the Canonreo Caps! Still work in progress though. Recently got a 3D printer and came up with this idea after printing a bunch of fidget for the kids. Initially printed with raft with cookie side down but…
Just a hood for the screen of the Canon R5. May fit other cameras with a screen size of 60x84x7.5mm. 61.4 and 61.6 wide versions to accommodate for different filament shrinkage and less calibrated printers.
I no longer use my Minolta Maxxum 7000 because it's a film camera. If you are like me and have a substantial investment in AF lenses that you want to put back into service for your newer Canon that uses EF lenses, this is an awesome and…
Store your Canon Camera batteries for Travel or organization! Choose the right box for the number of batteries you wish to store, and choose the proper fill for your use - there is a fill for batteries with Caps and a fill for batteries…
Ganondorf ripped from Smash Bros Brawl and remixed by myself. Scale him up and run the PrusaSlicer model repair. If you want to see more Zelda models, give this one a like and follow me. If you print it, please post your make! WARNING:…
