16 078 modeli
https://www.buymeacoffee.com/maxt ---------------------- 2 versions in one package: Without a recycle logo on the side With a recycle logo on the side Why should you use this model and not the others? It won't break, ever (as long as you…
Wydruk około 3,04 €–3,71 € nettoWstępna wycena jednego wariantu
Update 15.10.2023 New Top - less support required New Lid - bigger hole for the screw and more weight that it closes itself (should be printed with 100% infill) - 2 Versions available one has a recess for an M10 nut with a wrench size of…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Desk mount trash box Table up to : 20 mm, 30 mm, 40 mm or 50 mm (form IKEA Lack Table) 2 depths : 40 mm or 70 mm (screw_v2 is a little smaller to fit well the holder)
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
Models TrashiStand Default keyboard stand (main model) TrashiStand XL Same size but with small feet in front to support top-heavy keyboards (e.g. Model M) TrashiStand Mini Stand to display your Artisan collection. Now published as its own…
Wydruk około 3,60 €–4,40 € nettoWstępna wycena jednego wariantu
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Wydruk około 10,26 €–12,54 € nettoWstępna wycena jednego wariantu
BONG + ASH CATCHER
Wydruk około 11,82 €–14,45 € nettoWstępna wycena jednego wariantu
I'm making a master collection of all symbols of the car dashboard. I will upload now 50, and I will update overtime. I hope you like it. 1st pack (50): 10/07/2024 2nd pack (50): 12/07/2024 3rd pack (50): 16/07/2024 4th pack (50):…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena jednego wariantu
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model has 0,4mm tolerance. If you need less or more tollerance let me know in comment, i have project with parametric design so can add any tollerance. On pictures you see 70% rescalled print (black cube). For best results I suggest…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🧼 Detergent Wash Cup – Clean & Easy Powder Scooping! This detergent scoop was designed to make powder dosing simple and mess-free! With its ergonomic handle, you can easily grab and scoop detergent without spills or sticky packaging.…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…
Wydruk około 3,45 €–4,21 € nettoWstępna wycena jednego wariantu
The seashell model was made out of a 3D Scan. Printing: The seashell model was printed upright with support to have a higher resolution on the surface.
Wydruk około 1,25 €–1,52 € nettoWstępna wycena jednego wariantu
I found that there is well known idea to use squash ball for 3d printer feet for anti vibration. I made this model for my Prusa i3 mk3 by myself, so this is not really a remix but pretty much inspired by existing nice designs such as…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Dishwasher Door Prop Opener: A 3D-Printed Solution for Moisture-Free Dishes Overview Is your dishwasher retaining moisture long after the wash cycle is complete? Say goodbye to musty smells and hello to sparkling, clean, dry dishes!…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+/Gen2 You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa…
Wydruk około 8,13 €–9,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just place a beer bottle cap in the middle where you can put out the cigarette. In der Mitte einfach einen Kronkorken platzieren um die Zigarette auszudrücken.
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
New version, more improvements (for some pictures scroll down): 100% print in place, NO SUPPORTS!!; Easier to print dovetails - more area to grab on the build plate!; Zip ties no longer optional nor required; Better tolerances - Easier to…
Wydruk około 3,50 €–4,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Washer and spacer are fitted to go through a pegboard hole for easy mounting that doesn't require an extra set of hands. This will keep your pegboard just far enough off the wall you are mounting it to, plus it gives you flexibility in…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…
Wydruk około 20,74 €–25,35 € nettoWstępna wycena jednego wariantu
LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…
Wydruk około 6,22 €–7,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I like to keep things clean and protected, that's why I printed a hot shoe cover a while back then. This worked fine, but the cover did not only cover the hot shoe but also a little mechanism that tells the camera not to allow a usage of…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Its a prop os a flash Grenade:) If u find some error please comment!
Wydruk około 4,43 €–5,42 € nettoWstępna wycena jednego wariantu
Another ash tray based off a metal ash tray my friend had. PETG should work perfectly. Printed with 0.6mm nozzle Used PETG
Wydruk około 5,04 €–6,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wie der Name schon sagt habe ich einen Aschenbecher designt. Da ich nie einen für meine Gäste zu verfügung habe und jedes mal einen aus Alufolie basteln muss :D Now in English As the name suggests, I designed an ashtray. Since I never…
Wydruk około 3,72 €–4,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Scooby Doo Mystery Machine : Crash Derby Cars
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
Ashtray with a logo. Harley Davidson. Colorchange if you want it original.
Wydruk około 2,99 €–3,65 € nettoWstępna wycena jednego wariantu
Motivation A while ago I published a pretty cool bottle opener gun which did win the Bottle Opener Contest. It Features accessory rails to mount lasers, flashlights or sights. However I was not able to find commercially available…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Model Info A neat design bin to help keep your desk or other makerspace tidy. An exceptionally handy little waste bin for on your kitchen…
Wydruk około 5,47 €–6,69 € nettoWstępna wycena jednego wariantu
This is a trash bag dispenser so that you can keep your bin bags tidy. It can fit any plastic bag roll up to a diameter of 60 mm (2.36 inches) and a length of 187 mm(7.36 inches). It can be fitted either using double sided tape or screws.…
Wydruk około 5,42 €–6,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a washing tunnel for firefighting hose with Gardena connection This tunnel works great for C-Storz fire hoses and we tried it also with B-Storz hoses. I printed it with PETG 3 perimeters 5 top and bottom layers 100% infill…
Wydruk około 25,45 €–31,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Imprints clay with a lovely splash texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A funnel that fits the windshield washer fluid reservoir for a 2016 Volkswagen Golf (and other VW/Audi models). Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Random Perimeters: 8 (avoids top and…
Wydruk około 3,43 €–4,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Layerheight 0.2 The original is 50x50x100 mm and printed on a Mini. I have included two different lids. One with a trashbin-symbol and one without. I have also included a version which is 150% compared to the original. I have also printed…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
🇮🇪 Fáilte go hÉirinn! ☘ Welcome to Ireland! This model was created by Dany Sánchez . The Rock of Cashel (Irish: Carraig Phádraig ), also known as Cashel of the Kings and St. Patrick's Rock , is a historical site located at Cashel, County…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
Skoda Fabia 1 (1999 - 2007) phone holder on dashboard Diameter of the ball is 17mm I used the Baseus Car Phone Holder from Aliexpress as the holder itself https://s.click.aliexpress.com/e/_DBAMS11 It is necessary to print the model split…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The bottle can simply be snapped in and the closure can be opened or closed together with the holder.
Wydruk około 1,42 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
Wydruk około 3,03 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I train dogs for canine nose work and retriever field work, and have a collection of long lines and leashes of various length. For a while I have tried to find a way to organize them a bit better than just throwing them all in a bag --…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
16Nov2024 - Uploaded V2 model which has a shorter front wall and deeper cut to the rear with a larger radii up to the top. This was created to provide a splash guard to the PETLIBRO DockStream pet water fountain in order to prevent water…
Wydruk około 7,81 €–9,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Edge protector for use with 1" (25 mm) wide tension belts when securing loads. Protects the edges and forms a larger contact surface. A simple version and a version with clips are available. Through these, the edge protector automatically…
Wydruk około 1,32 €–1,62 € nettoWstępna wycena jednego wariantu
This is a dashboard mount for Fanatec's CSL DD wheel base along with a Google Pixel 6a. Feel free to tinker with the provided .ipt file (Autodesk Inventor or Fusion 360) or even send me your smartphone model and I'll gladly modify the…
Wydruk około 3,06 €–3,73 € nettoWstępna wycena jednego wariantu
Cigarette / Joint Holder and Ashtray Short holder / Tall Holder attach to the ashtray base via 3x6mm magnets (or you could just glue them together). Magnets also can be added to the base.
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
This adapter is for flash light pewered with 3 pcs of AAA batteries. These torches are cheap and quite common, but problematic and not economical to power. You need three batteries, but they sels in packs of four. If you replace primary…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
This print is adjusted to the size of german yellow trash bags and to the cheap trash bags from Kaufland brand. -- Tolle Lösung, um Platz in den Schubladen zu sparen! Optimiert für Kaufland Müllbeutel und dem Standard-Gelbensack. Restmüll…
Wydruk około 3,46 €–4,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed in ASA to be able to withstand the heat in my car. Edit 6/18/24: I added 2 files one for 162mm length phone w/ case and a Step file to be able to adjust the model to your liking. Just make sure the pegs that go into the vents…
Wydruk około 5,98 €–7,31 € nettoWstępna wycena jednego wariantu
Check out this youtube video: https://www.youtube.com/shorts/vqTyxWd83uU A free standing Model of Kakashi from the anime Naruto. Colored the model with sharpie markers since I don't have multi material print. I converted this 2D drawing…
Wydruk około 2,28 €–2,78 € nettoWstępna wycena jednego wariantu
To install the cover on the bin, first put the bigger tab into the hole, then push the smaller one in and it should go easily. Then just superglue the handle onto the cover.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Sometimes when our trash bin got emptied, it fell aside and the peg which holds the lid breaks. This is a quick replacement part for a SULO trash bin with 120l or 240l volume, very common in germany. It's shorter than the original one but…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Einfacher, kleiner Behälter für Filamentabfälle, kann dank der Aussparung leicht unter die Tischkante gehalten werden. Platzsparend und immer zur Hand. Simple, small container for filament waste, can be easily held under the edge of the…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
Lampshade for printing in vase/spiralmode opening is 41 mm width I would be happy if you like it. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.18 Filament: amazon basics PLA glow in the darc…
Wydruk około 6,39 €–7,81 € nettoWstępna wycena jednego wariantu
Ein Aschenbecher zm festklemmen für den balkon habe alles mit genügend toleranzen versehen der schwalbenschwanz solte perfekt passen habe alles auf einmal mit dem mk3s gedruckt aus petg für eine höhere hitzebestendigkeit am besten währe…
Wydruk około 16,04 €–19,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall bracket for spray nozzles of an EAWONGEE 4000 pressure washer gun Printed in PETG MK4 IS 0.2 Filling 15%
Wydruk około 1,81 €–2,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy to print Ashen Chest Key from Sea of Thieves (SoT) Three versions of the model is available to print: AshenKeyFlatBottom is for FDM printing, bottom is flat so no supports needed and it prints fast at 45 minutes at 0.2mm…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
This is the Squash Ball Elephant Feet. I use it underneath my Prusa MK3S+. I tried different squash ball solutions, but they all break on me (or I just use to much force). So decided to design one that just sits under the frame, taking…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Check out this awesome statue of Ashton from NinjaKidzTV on YouTube!
Wydruk około 6,86 €–8,38 € nettoWstępna wycena jednego wariantu
Collection of mud flaps for the front and back of the 3DSets Landy. Overview Logo 4x4 Mountain. LandR. Logo. **** Printed with PLA and 0.25 nozzle, color change at 0.65.
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
m3f included with all parts ready to print and suggested supports. Should all fit together if your printer is fairly accurate.
Wydruk około 4,73 €–5,78 € nettoWstępna wycena jednego wariantu
Toyota Aygo dashboard phone clip This adapter clips onto the dashboard of a Toyota Aygo. At the end is a ⌀17mm ball that can snap into the common ball joint socket used on many car phone holders (not included). Inspiration This design was…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
You can print sashes that provide 1 over 1 or 4 over 1 dollhouse windows. The flat springs on the sides of the sashes keep them in place after movement. I successfully printed everything without support. Install each sash by placing one…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
These squashballfeets for the BambuLab A1 allows you to reduce the noise of your printer by dampening out vibrations. Print Settings Printer: Prusa MK4 Rafts: No Supports: Yes (The Dome for the Ball don't need Supports) Resolution: 0.15…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Taschenaschenbecher mit Öse für eine Kette
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
A bolt-on quick-release mount for the Cygolite Dash bike light to replace the stock rubber strap that would not keep the light in place. Trail approved! One-handed quick-release! Minimal footprint! Easy installation without removing…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix. I colored using Prusa slicer multimaterial painting for the MMU2. Settings: 0.2mm quality Generic PLA, MMU2 Support
Wydruk około 15,79 €–19,30 € nettoWstępna wycena jednego wariantu
Bike Hook Frees your hands while carrying grocerie bags or a dog leash. The hook is sturdy enough to hold a heavy bag. Can be used on handle bars with 22,20 mm diameter. For other diameters, send me a message. Needed Hardware: 2 M4x20…
Wydruk około 4,25 €–5,20 € nettoWstępna wycena jednego wariantu
My Nextbase 522GW came with two adapters for attaching to the window, a suction cup and a flat plastic base for use with a small piece of 3M VHB. I had only used the suction cup for years and now that I want to permanently attach it with…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Yet another cigar ashtray. Check out all my ashtrays: https://www.printables.com/@geokscott/collections/1050149
Wydruk około 13,17 €–16,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…
Wydruk około 8,40 €–10,27 € nettoWstępna wycena jednego wariantu
SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
This detergent container is a two part print. The lid can be printed seperately. This can be used to print it in a different color. Therefore, different powder detergents (whites, color, etc.) can be color coded with different lids. Print…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Summary This model combines the 4 STL files of the lid from the original model into a Single model that is ready for printing with no gluing necessary. These were combined using Tinkercad. Combined STL files: trashcan_top_handle.stl…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
Whether in airsoft or out in the woods, shiny stuff is really easy to spot. The front of your flashlight is a large perfectly reflective device. Adding a ARD can greatly reduce the angle at which the shiny mirror surface can be seen by…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu
Ratio-changing pulleys are a wonderful hack for bikes. For non-electronic drivetrains, they allow bending the rules normally requiring a stringent pairing of shifter, derailleur and cassette families. Also called travel agents or…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this saucer in order to place it under my bonsai pot but, since a lot of bonsai are planted in this type of pot, I hope it could be useful for someone. I printed it in white PLA but it would be better in PLA Wood in order to…
Wydruk około 8,29 €–10,13 € nettoWstępna wycena jednego wariantu
Distance holder for Miele's dryer or washing machine to keep the door open for a long time without the door being open or approaching further and the machine being able to dry out. Print instructions Sliced for a Prusa mini. Print without…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
This is a remix of Eco-friendly deskside trash bags holder by rin_ofumi that replaces the original screw with a thumb screw. Since I move the holders often, this allows for install without a screwdriver.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These knobs can replace both the large and small knobs on a Maytag or Whirlpool washer and dryer. Backstory: My large timer knob cracked on my Maytag dryer after only two years of use. On removing the broken part, I find that the knob was…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
This deployment dashboard works well in conjunction with the character miniature bases. The dots in each slot tie directly to the identification dot on the bases. There is a deep vertical slot to hold the deployment card and a shallower…
Wydruk około 3,65 €–4,47 € nettoWstępna wycena jednego wariantu
This is a remix of the Player Dashboard by Farlei. It is has a larger card space to allow for sleeved (103mmx128mm) cards and a slot on the side for Condition Damage or Strain tokens. Printed with PLA Layer height: .15 Perimeters: 3…
Wydruk około 4,13 €–5,05 € nettoWstępna wycena jednego wariantu
Reduce some stress in your Mini-Z driving experience with this practice body inspired by the iconic Lamborghini Countach. It's designed to withstand occasional crashes and smoothly transition across different terrains, including hardwood…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
The dog leash organizer-handle can be used with a conventional rope and serves as a reel to carry the leash comfortably, e.g. on the belt.
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple Imperial Assault player dashboard: Large slot for 1 Hero sheet 3 slots for small cards: hero, item, supply, reward, etc. You can fit at least 9 small cards (more if overlapping cards) I created this dashboard to use with the…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Simple lateral flashlight holder for picatinny rail. This mount allows the user to turn on/off the light using the index finger without need of a special torch switch. In the picture was mounted a 25 mm diameter torch on an airsoft…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
A simple adapter to mount a cheap water pump onto a water table for kids. Reason: Mounts to the table, allows us to turn the hose off, but still lets the kids play with running water that rains down from the top of the table. Water table:…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
I have uploaded 2 versions: WallMountTrashBag_ScrewHoles - for mounting it with screws. The holes have a diameter of 4mm WallMountTrashBag_Adhesive - for mounting it with adhesive tape / double sided tape Here's what I had in mind while…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Money Tic Tac Toe This version of Tic Tac Toe, aims to introduce a more exciting component in the challenge of winning. It can be played with Tokens/coins of Dollar (black) and Euro (orange), created for this purpose. After the end of the…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a washer for nails or screws
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This 3D model features a decorative gnome in a wizard style, perfect for holiday seasons or simply adding a magical touch to any corner of your home. The gnome wears a pointy hat adorned with a star and a detailed cloak, giving it a…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Washing machine door opener Beko WMB 71643 PTE too bad the orginal is broken and i was asked if i can construct it print. After 2 days of inactivity, the washing machine washes again. ;) Print instructions Rafts: No Supports: Yes…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Slicer: The text and bottom are customizable in Prusa Slicer. (see image of the slicer) Included in the file is a modifier that adjusts infill and perimeter. In my example I used 20% honeycomb infill with 3 perimeters. (So no dust can…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
Minimalistic IQOS Ashtray
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
Everyone has printed it at least once, but I’m going to make it race! I modified a detailed bigger model I’m currently using for a game Im working on specifically for this contest. Downscaling this large print required more than 16…
Wydruk około 2,61 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter was used and tested on the 40v EZ Clean 600. Since the washer connectors are the same it will also work on the 600 18V +one version and the 320 18V +one version. The jug handle is useful to steady and control the washer.…
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
Malgré une surélévation de l'imprimante qui ne gène en rien, il se fixe a la place des supports d'origine. J'ai utilisé du TPU pour la partie haute avec un remplissage a 30% et PLA 50% pour l'autre partie. Vous pouvez remplacer le PLA par…
Wydruk około 4,67 €–5,71 € nettoWstępna wycena jednego wariantu
English below. Halterung für eine Taschenlampe mit Durchmesser 30 mm, und Lenkerdurchmesser von 31,8 mm (1 1/4 Zoll). Es wird zusätzlich benötigt: Senkkopfschraube M3x30 Senkkopfschraube M3x15 selbstsichernde Mutter / Stoppmutter M3, 2…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
The best results in terms of durability are achieved with Prusament PETG. The drawer was also designed for Bluetooth speaker (fits perfectly).
Wydruk około 18,92 €–23,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
