206 modeli
A battery holder for Hilti B22 Battery for the workshop, garage or your work van. Importen info about Gcode: It print with a 2mm brim to add strengh to bed. I just took a deburrs on the bottom edge and it was perfect after. The 2 holes to…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy
Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…
A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…
Modified Mike F's " SB2209 / SB2240 mount for PUG " for use with a PG7 Cable Gland. This one has M12x1.25 threads so the PG7 can screw directly in. 2 versions included, 1 has a cutout and one doesn't. I haven't tested this yet, but I'll…
UPD : Added suitable for main body Voron-Stealthburner Thanks to @Ibot_3D for the idea. He inspired me with his design! But his model was a little hard to print and many (including me) could not print this model. I increased the spaces…
Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
Revisions 2024-03-26 Revised Main Body to incorporate Straightened Latch. Replaced corresponding Motor Plate as well. Overview This group of objects implements a CAN based Toolhead for the Voron 2.4r2 3D Printer. The design uses a…
V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…
Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…
Remixed version of @MikeF PUG Mount for BTT 2209/2240 - now it fits the bulkier and longer plug that BTT ships with newer boards.
MDT Inspired buttstock, to be used on a Savage B22 Precision rifle. Or modify it at your will to adapt it on any rifle. Main stock body uses 2 M4x20 screws with 2 M4x6x6 insert Use a M10x80 hexagon socket screw and M10 nut for the…
In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…
A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…
Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…
Note: This is for the original CAN cable that BTT shipped, with a small rectangular plug. They've started shipping a different cable with a different plug shape, which this STL is not compatible with. The existing PUG mount doesn't work…
This is for the original version of the CW2 main body, won't fit BTTs variant.
Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…
Printed standing up with no supports. Compaired to other models this one is very fast to print and does not use much plastic at all but still locks in place.
Remix to add support for the connector as well.
A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…
Maintain a unique style of Stealthburner. No screws reguired.
CW2 Main body for use with the BTT EBB SB2209/RP2040 canbus toolhead board. Dual filament sensors for use with the ERCF. Updated 9/23/25 New and improved EBB fan housing, way more room and improved air flow. Fixed the tight limit switch…
Strain relief using a ziptie for Galileo 2 (G2E) extruder and SB2209 or SB2240 canbus board.
This model has the followinnf features: CPAP mount (2 heat inserts on StealthBurner + CPAP connector) Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC BTT KNOMI BTT CanBus…
It seems that some people are getting a CAN cable with larger overmolding that doesn't fit the mount included in the EBB SB2209 repo. This is not a perfect fix, but it's good enough. I've included STEP files for remixing!
Add 3007 fan and ventilation for your can board. I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.
Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.
*this is for the newer design cable for BTT SB2209 RP2040 Used to stiffen the can bus cable at the tool head side. **print with supports on the usb C part the long arm doesnt need it. print using PIF settings Use 2 zip ties please leave ⭐…
I saw my EBB toolhead driver was getting up around 90C! So something had to be done ASAP! I took BTT's EBB door and put the classic Hexagon “Bestagon” on it to make vents. One is just vents the other has mounts for heatset inserts and…
This is a multipurpose mount designed for the BigTreeTech EBB SB2209 USB 1.0. The EBB SB2209 USB comes with a small USB to CAN adapter. I was not able to find any suitable mounts for this small chip and thought I would try my hand at…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.
Use with the CW2 cable bridge.stl from BTT. Too big to work with the regular cable cover so i added a cutout. You'll have to print it with supports. Add two M3 heat-set inserts into the clamp. Secure with M3x16 screws (or longer, but they…
Found the 3m0 nozzle camera cpap. i didnt need the camera part. also modified tube to be centered removed hex.
I printed in PLA at 15% infil with no supports, and it held the B 22-85 I tested it with Holds the battery well enough to not fall out, but loose enough to easily take the battery out when needed. I had designed this and printed it for a…
All the models I could find that used " PG Cable Gland M12 " for the SB 2240/2209 CANBus cable and worked with the Galileo 2 Extruder didn't work as expected. Some had a design flaw that caused more stress on the cable than relief; others…
Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…
a revolver prop version using the gb22 frame design. i made the liners in case you want to make different liners in other calibers. for show. rotate the cylinder for each shot. cylinder and barrel liners held in place by the nut fixed the…
Print using standard Voron recommended settings for toolhead components.
use a 6x3 magnet for the filament sensor with a standard microswitch refer to the filametrix mod for fitting the heat insert. https://github.com/sorted01/Filametrix/tree/main
Please, print them in ABS, 4 walls and 40% infill. You don't need to change the orientation of the parts.
quick way to connect two pcb canbus to existing orbiter 2. I had to unscrew orbiter motor and put it so that motor wire comes from the top and then insert it into sb2209 due to very short cable of the orbiter. You can use two regular…
I am using this EBB SB2209 RP2040 can board from biqu and I noticed the driver tends to heat even when not using a door cover at all. the chamber was also open. NOTE: I didn't tested this. I eventually installed a g2e
I had to do some modifications to some existing models to build my Stealthburner with Filametrix filament cutter, Filament runout sensor, LGX lite and Bigtreetech SB2209 / RB2040 CAN Board. Thank you to the work of…
This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…
This is a vented version of the current BTT Cable Door for EBB SB2240. I could not find any other designs with the new version that are vented, plus I think the angled vents match the Voron aesthetic well. Original BTT files can be found…
This is a remix of a remix. I updated the Main Body uploaded by @MyStoopidStuff to incorporate the latest revisions from the Voron team. Please check the image if you are unsure if you need this part. The features in Red are the changes…
same hardware as Nyx's linked below, CNLinko quick detach PG7 https://www.amazon.com/gp/product/B087MXNC7W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
this is a mod of the gb22. the barrel and frame are 1 piece. the slide is in 2 pieces that go together via a dovetail. the slide is moved forward via a rubber band attached at the end of the slide and connects at the trigger guard. these…
a version of my gb 22 line where there are nuts that screw onto the frame to hold the barrel on . https://youtu.be/5fKLdxIrN80 i included a step file in case you want to make modification. Custom Section Category: Props
If you are using a BTT SB2209 toolboard, you will also have to print their Stealthburner motor plate, as it provides more room for the toolboard. As such, they have made available a cover for this that fits perfectly with the new motor…
Really just adding Knomi 2 support to @seage's work and remixes. You will need to download the CPAP connector from Seage's model. Will need to download the Knomi 2 mounting plate from the Knomi 2 github repo: found here:…
A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. SB2209 CAN (stm version) not compatible Based on user feedback, support for the…
Red Bull Racing RB22 F1 Car, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle…
As many others, I've encountered high temps (above 85c) on my EBB2209 toolhead board, for Voron CAN (2.4 R2 Pro machine). I'm using Stealthburner with CW2 extruder and there was no option that suited my needs, which is CW2 + 3010 (24V)…
The EBB card with its USB socket on the front does not allow assembly with the standard body of the Galileo 2. The pcb displayed is that of a classic SB type CAN card. The EBB SB2209 USB card not having been modeled by Bigtreetech, I did…
With the release of V1.2 of the EBB toolhead PCB, the included main body is no longer compatible with V1.0 or V1.1 modded cable covers. This is a simplistic V1.2 compatible cable cover for use with a 30x30x10 fan. Personally I'm running a…
I needed a simple cable route/mount for the included cable given with SB2209 and SB2240 kits. Just push the cable in and screw in just like the original design.
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…
Perfect model to print for having a lower temperature near the SB2209 or SB2240 to make them last longer. It also has hexes!!!!! In the near future will be out a model that uses also a small fan to keep the electronics even more frosty!
I remixed the ventilated pcb cover for the EBB SB2209 USB V1 to mount a fan because the RP2040 kept overheating. Use 4xM3 heatset inserts and M3x14 screws to mount a 3010 5V fan, the fan can be plugged into the unused USB expansion ports…
This is for the Voron 2.4 with the BTT EBB 2240 and 2209 toolboards while using the Galileo 2 Extruder. I downloaded the PG7 holder by HartK and installed it when I installed my Galileo 2. Problem was that I could no longer home my…
I just added a coutout hole in order to not have to disable the whole cable to remove it. The rigidity is good. I've been using it for more than a month now. Printed with Voron settings.
In the original model the lower switch recess was slightly to shallow, the switch was standing out.
The left side guard of the front body is removed for the pin clearance. Attached a vented cover to be used together with the body.
Quick and dirty SB2209/2240 CAN bus umbilical mounting post for Galileo 2 Extruder. Use a M3x50 SHCS to mount the post instead of the cable chain holder, then fixate the umbilical with a zip tie. Print without support to keep the cavity…
I found the existing options for cable relief of the BTT EBB SB2209 USB were lacking in one way or another. So I made my own. My goals: Relieve strain on the umbilical cable. Compatible with the PUG system. Allow greater access to the…
I remixed the LGX lite mount because I felt the others are incorrect or just make things line up weird.
This PG07 type cable support is intended to be super lightweight, so is thin and requires a strong filament with good layer adhesion for best results. I've had no trouble with ABS, but others report some cases of breaking along layer…
this is a modified version of the Galileo 2 extruder front that allows the use of the bigtreetech sb2209 usb board. The original prevented the board to fit so I have adjusted a few areas to enable the board to sit correctly.
More options for fan styles! These are for 3007 fans. Updated hex-pattern to be more rigid. Original design kept breaking on me. ASA-CF used in picture. Only print in ABS/ASA
The original SB2209 misalignment protector didn't work for me with G2E (using https://github.com/IRTrail/G2E-Filametrix ). The raised part next to the pins doesn't fit inside the opening the G2E body leaves. This version flattens the part…
https://github.com/juliusjj25/G2E-Filametrix-Lever-Switch-Mod Without supports. In one of the latest updates, Fusion 360 significantly reduced the model quality when exporting to STL (fewer polygons). Because of this, I now export from…
Remixed to fit different extruder frame (with angle cut at the botton)
Warnings: ⚠ Please read the powerbank module instructions ⚠ Never solder to batteries ⚠ Assemble and use at your own risk ⚠I reccommed getting brand new, reliable batteries from a well known brand, such as Panasonic, LG, Samsung. 2 x…
A very simplistic pug mount for g2e working with btt sb2209 can
UPDATE: I redesigned the toolhead side of the mount to prevent the break of cable. I printed in PLA with standard Voron settings, because I print only PLA with my Voron. Materials you need: -2x M3 heat insert (I used the standard Voron…
BOM: 3x M3 Tool head: https://github.com/Armchair-Heavy-Industries/Xol-Toolhead Board: https://github.com/bigtreetech/EBB/tree/master
To get the SB2209 USB to fit my Galileo2, I de-soldered the I2C connector and it fits perfectly. The cap-head bolt in this is M3x40, so you don't have to find an impossible M3x50. It has a zip-tie routed slot as well as steel cable mounts.
Avoid tangling the umbilical cable with the Z chain ! This mod is intended to be used with this one : https://www.printables.com/fr/model/363657-voron-v24-trident-rear-umbilical Print the cable gland twice in TPU and use 3 zipties to keep…
I wanted to use the wire strain relief instead of the gland ones, so I extended BTTs cable bridge to work with this stealthburner modification. Compatible with BTTs CANBUS cable clip with wire strain relief here:…
This remix is for common 3 hole cable chain whit heat set insert.
Three different mounts for Hilti B22 batteries Vertical model does not clip, and is shorter. Can totally be used horizontally for stationary purposes. Horizontal models do clip on, and were designed to be placed in a van. So they wouldn't…
ECAS PTFE tube connector added to Voron Stealthburner for use with BigTreeTech SB2209 I have adapted main_body, latch and cable_cover from Voron Stealthburner for BigTreeTech SB2209 USB. It may also be compatible with SB2209 CAN.…
Print this in ABS only, using Voron printing guidelines. No supports needed. Tested only on Voron Trident, but should be compatible with 2.4. Use the second part (black piece in the picture that clamps onto the PUG) from the original to…
my redesign of the gb-22 by mark serbu. the barrel goes/slides in first. the slide goes into the frame sideways via 2 slots. the slide is under pressure via a rubberband or other elasic to move the slide forward, and is connected to the…
-this is the deeper/wider version of the cover ~48mm deep (front to back if you're looking @ front of stealthburner) -I use freecad, I've included that file, the STEP file and the STL for anyone that wants to keep modifying -if you're…
Halterung für Schlitz - Schraubenzieher von PB ~ ab Jg. 1953 Mit 3 Griff-Typen kompatibel: Classic, Multicraft und SwissGrip Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix…
CAN Cable holder for a PG7 strain relief compatible for the Stealthburner toolhead with the Galileo2 extruder and Big Tree Tech SB2240 / SB2209
I added the 3DO pcb holder to the latest files from BigTreeTech for the EBB SB2204/SB2240 Clockwork2 main body and pcb cover.
Print laying down, some support is needed due to orientation. Use temp resistant material I used petg but i would suggest asa or abs. So far it held up. This was for a 2010 model check if others will use the same.
my Brain Slug version works fine and EBB is around 36°C that really nice.. Fan is mounted with heat inserts for M2.5 and M2.5 screws with 8-12mm length Every time I look at it I think about this https://futurama.fandom.com/wiki/Brain_Slug
This is a remix between the official bigtreetech model and the Leiwandizer model, the difference is that the side cover is bigger and the body is different. It uses a micro switch and a 5mm steel ball.
see it here. https://youtu.be/P2Itm0LUR1k a gun prop design based on the desig by mark sebu, the gb22. this gun has 2 parts and no weld or screws etc. the barrel fits into its place , then the slide just fits into the frame uses rubber…
Download the updated version below: Filament runout sensor for Stealthburner with EBB SB2209
This remix was made to allow usb connection with BTT SB2209 toolhead board as the original model blocks the USB input. PUG Clamp and Bottom Standoff parts as exactly the same of the original model, but I provided them here for…
