4710 modeli
For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ UPDATE 1: Added an additional version where bottle caps are replaced with golden coins :) Comes in two versions,…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
This is a book stand for your library that makes it look like Yoda is holding your books using the Force. Since the models are separate and the pin holding the character in place is on the book stand part, you can also just print the Yoda…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
Layer 0.30 mm, filling 25%, brown PLA painted with acrylic markers, supports on the printing pad
Wydruk około 12,19 €–14,90 € nettoWstępna wycena jednego wariantu
My son turned 16 and loves Mcgybeer's "Articulated Shark." So I made him a keychain version of the model. I scaled the design and added a loop to attach your keys to. I also attached the tail to the last body segment and made it so that…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Remix of Val's Grogu from Mandolorian Original model https://www.thingiverse.com/thing:4038181
Wydruk około 2,37 €–2,90 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 13,07 €–15,98 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed
Wydruk około 17,45 €–21,33 € nettoWstępna wycena jednego wariantu
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 🦊🍂✨ I’m so excited to share this adorable Flexi Baby Red Panda with you…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
This is a keychain version of McGybeer 's Articulated Lizard V2. His models are great and I have been printing them for years. He is an excellent creator to support. This keychain only uses 4g of filament and is a great option for your…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
Swaddled Baby Jesus and Manger Set Like the manger. The Baby Jesus is so so.
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Building on Anachronist's Nuts & Bolt Baby Dexterity toy, this version keeps the same screw dimensions but provides varying nut external dimensions. Your toddler can have fun stacking them in order of size (or in any order that pleases…
Wydruk około 8,73 €–10,67 € nettoWstępna wycena jednego wariantu
A little statue of baby Groot, can be used as a flower pot. Gcode-with support from the build plate Print instructions The program used for printing: PrusaControl - PLA
Wydruk około 5,69 €–6,95 € nettoWstępna wycena jednego wariantu
Keychain baby Groot
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Baby Groot Head Pot Plant Nozzle: 0.4mm Layer: 0.2-0.28 (Recommended) No supports needed Scale it as you like :) Made the hole bigger so water can be drain better Model by Hanoch Hemmerich
Wydruk około 2,73 €–3,34 € nettoWstępna wycena jednego wariantu
Cute Baby Dragon Generated by Luma AI. Added UV displacement for details in Blender. ZERO artistic MODIFICATIONS. All I did was cut off the base that was included. 2/28/2024 Added offsetsaddedbbd.obj. Which is a quick fix to the jagged…
Wydruk około 6,54 €–7,99 € nettoWstępna wycena jednego wariantu
this baby yoda vomit toothpaste cap is a remix frrom https://cults3d.com/es/modelo-3d/artilugios/baby-yoda-pasta-dientes-thootpaste#_=_ but painted and laminated in prusaslicer and MMU2 Ready. The Gcode and the 3mf are uploaded.
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…
Wydruk około 2,67 €–3,26 € nettoWstępna wycena jednego wariantu
This is a keychain version of McGybeer 's Articulated Chameleon. His models are great and I have been printing them for years. He is an excellent creator to support. This keychain only uses 3g of filament and is a great option for your…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 24,55 €–30,01 € nettoWstępna wycena jednego wariantu
Zusätzliches Material: für die Messstab-Halterungen werden 2x Sechskantschrauben M6x20mm benötigt nach Bedarf ein O-Ring für den Staubsauger-Adapter Hinweise: Alle Teile können ohne Stützmaterial gedruckt werden Die Gewindestutzen auf der…
Wydruk około 9,82 €–12,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remix of Macroglossum's baby raptor model. To get the best results, either scale down the layer height (I use 0.10mm), or scale up the model (120% is a good size). I recommend PLA, although I'm sure PETG would work too. I like to use 0%…
Wydruk około 1,94 €–2,38 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 6,26 €–7,66 € nettoWstępna wycena jednego wariantu
The Imago Mundi dates back to around the seventh century B.C.E. and is considered to be the oldest world map ever discovered Created around the seventh century B.C.E., the map centers around the Euphrates River and includes various…
Wydruk około 9,00 €–11,00 € nettoWstępna wycena jednego wariantu
This is a hexagon shaped dice tray, 29mm high (1.16") and 150mm wide (5.94") with a raised edge and thick wall for rolling your dice inside. Inside the tray, there is text and an image that says "It's Probably Fine" with a Nat 1 D20 and…
Wydruk około 6,47 €–7,91 € nettoWstępna wycena jednego wariantu
This is a movable crystal kite that is printed on the spot. You need good bed adhesion. In addition, the dragon has a kick system on the wings to extend its lifespan. It has also been tested with edge and comes off beautifully. Happy…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Quick and easy to print. Print with 0,2 mm layer and change colours at 3,2 mm (the base is 3,0mm and the outline is 3,4mm) You’ll find the ”best mom” keychain here
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Hračka pro děti. 3 různé tvary. Třetí model obsahuje pomocný support ale je tam i model bez. Doporučuji suport kvůli spodku sošky a bradě hlavy. Model má malé ruce doporučuji větší velikosti.
Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Wydruk około 12,57 €–15,36 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 3,08 €–3,76 € nettoWstępna wycena jednego wariantu
Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Pasapañuelo / scarfring / neckerchief for Scouts or CubScout
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Wydruk około 9,24 €–11,30 € nettoWstępna wycena jednego wariantu
Seriously, who even likes these things? Worst thing to get at Easter. I coated the print in sugar and it tasted the same, minus the chipped tooth (just kidding). This is a fun swap-prank or decoration if you please. I included a picture…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
TL;DR Goal Achieve impeccable MMU2s reliability: printing of 5 color MMUTT (1000 tool changes) without a single user intervention. Hardware modifications Extruder wider filament path inside the extruder above and below the bondtech gears…
Wydruk około 8,35 €–10,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 13,62 €–16,64 € nettoWstępna wycena jednego wariantu
I Remixed The Model for faster print less trash and user without MMU or any other Multicolor Setup
Wydruk około 7,39 €–9,04 € nettoWstępna wycena jednego wariantu
This should work with the HelloBaby camera models: HB6550/ HB65/ HB6339/ HB40/ HB6081/ HB66/ HB6351 (but it was only tested on the HB6550Pro model). The original adapter to HelloBaby flex mount broke for me, so I made this to replace it.…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Easy to make a cute baby Panda keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Wydruk około 16,62 €–20,31 € nettoWstępna wycena jednego wariantu
Baby Grogu and Finger Puppets. Resize to fit your finger.
Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu
Hello Our babies are so curious and love to explore the world ... but when they are interested in electrical outlets the risk of electrocution is not far away! So I decided to design this safety outlet plug cover to prevent any risk. The…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Inspiration came from a Marin_Bs bowden coupler clip, but I upgraded it substantially. - it has an angled thread so it can be tightened with a provided nut (the more you turn the more it will squeeze) - it can be reused many times instead…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
I didn't want to use the screw that the original mount requires. My crib wall is ~19mm thick so I cut small chunk out of the original model such that the gap was ~20mm. While it makes the model less versatile, it is a little more…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
A drying rack for storage bottles of breast feeding pumps and/or baby bottles. STLs are included for the Medela storage bottles, used amongst others on the Medela Symphony and the Medela Swing, and for the Philips Avent Natural line of…
Wydruk około 1,59 €–1,95 € nettoWstępna wycena jednego wariantu
Inspired by : https://www.pinterest.fr/pin/770185973802612483/ Variant without background You need a frame Print the 5 objects, adapt the text and insert a color change height 3.2 Glue the 5 objects around the frame Variant with…
Wydruk około 2,49 €–3,05 € nettoWstępna wycena jednego wariantu
Zámek kaslíku Babetta Náhradní díl na moped Babetta 210/215. Babetta Lock Castle Spare part for moped Babetta 210/215.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Wydruk około 22,06 €–26,97 € nettoWstępna wycena jednego wariantu
This is a plug for the “vomiting” baby Yoda to keep the toothpaste running. Print slow! Is is a small model and it will print in under 15 minutes even if you go really slow. No support needed. Just cut the plug to the desired length and…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Scale in almost any size you like and slice so that it starts in black then changes to white and then orenge then red. remix into a magnet or blow up to 30 inches high your choice. Display it somewhere prominently to make alien diplomats…
Wydruk około 2,41 €–2,94 € nettoWstępna wycena jednego wariantu
I modeled this baby yoda lightsaber using fusion360( Project file is in the downloads) and using the concept art that is in the photos. Print instructions Print it with Supports enabled and at least 15% of infill.
Wydruk około 4,86 €–5,94 € nettoWstępna wycena jednego wariantu
In my case I used a “GHB Babyphone 3,2 Zoll Smart Baby Monitor mit TFT LCD Bildschirm". You can easily clip the camera to any corner of the bed.
Wydruk około 1,72 €–2,11 € nettoWstępna wycena jednego wariantu
Mr. Giggle, the Magical Shwoomy Elephant Keychain He might look like an ordinary keychain, but behind his happy eyes, there is a sad story. While attending Elephantery (Elephant Elementary), he was bullied by his co-elephants for being…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Model původně vznikl bez postranního kanálku a bez chytky, ale časem se ukázalo, že bude ideální odvod vzduchu z nádrže a také něco, za co bude možné chytnout. Budu rád za Vaše případné komentáře :)
Wydruk około 4,06 €–4,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Universal camera holder. I used PETG filament. The thread of the screw for fastening must be screwed in and out several times - then it will go easily. I recommend gluing 2 pegs with instant glue so that they don't accidentally fall into…
Wydruk około 6,22 €–7,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pro usnadnění nalévání oleje má trychtýř jemně zvlněnou výpust kvůli umístění nalévacího otvoru a rámu Babetty. Upozornění: tloušťka stěny je 1mm, proto je nutné dávat pozor při opalování stringů, aby se stěna neprohnula. Budu rád za Vaše…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thoth: The Egyptian God of Wisdom and Knowledge Thoth, in ancient Egyptian mythology, was a multifaceted deity associated with: Writing, Knowledge, and Wisdom: He was considered the inventor of hieroglyphs, the scribe of the gods, and the…
Wydruk około 8,40 €–10,26 € nettoWstępna wycena jednego wariantu
Model prepared for multi-color MMU printing. Printing settings: Filament: Prusament PLA Brim: No Infill: 15% Nozzle: Prusa HF 0.4 mm Prusa Slicer: 0.2 mm Speed MMU settings: Extruder 1: Brown Extruder 2: Black Extruder 3: Green
Wydruk około 38,27 €–46,78 € nettoWstępna wycena jednego wariantu
Basic baby blocks that include all 26 uppercase letters of the alphabet and numbers 0-9. 6 blocks for all 26 letters and 10 numbers Block A - A,G,M,S,Y,5 Block B - B,H,N,T,Z,6 Block C - C,I,O,U,1,7 Block D - D,J,P,V,2,8 Block E -…
Wydruk około 2,11 €–2,57 € nettoWstępna wycena jednego wariantu
This outlet cover will protect your plugged in electronics from those meddling kids.
Wydruk około 4,73 €–5,78 € nettoWstępna wycena jednego wariantu
Segnaposto che diventa una decorazione per albero di natale (è presente un foro per far passare un gancetto o un filo sottile ed appendere all'albero di natale) realizzata con stampante 3d a singolo ugello mediante stampa inversa. Per…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
If you have a Eufy E21 baby monitor camera and place it on a flat surface, you'll find the camera can't look all the way down. The camera can pan all the way up at the ceiling, which means you're wasting most of it's range of motion by…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Hook for Globber Baby Bike Important Note: You need to press the model horizontally. I have experienced that the state in which it appears in the photograph is unstable. ____ User update: Contrary to what it looks like in the photo, if…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
I designed this my self, i wanted roughly a mouth shape upper an lower jaws. Both halves have lids held with hinges and clips. The two halves held together with 8mm x 2.7mm cylindrical neodymium magnets. I printed this using black tough…
Wydruk około 4,15 €–5,07 € nettoWstępna wycena jednego wariantu
This a Babyphone Camera Holder for the Philips Avent (Modell SCD923/26). It can be used to store the babycamand a powerbank, which can be used to power the babycam. Dimensions: Theoretically it can fit any babycam with a stand of 70mm.…
Wydruk około 12,49 €–15,26 € nettoWstępna wycena jednego wariantu
This is a Cutter - Engraver i made for a Pastry Chef i made a few years ago. She wanted to decorate a birthday cake with 3D Baby Shoes made out of Sugar Paste (Fondant). There are 6 pieces that cuts sugar paste and combining all pieces…
Wydruk około 6,10 €–7,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a way to hang my kid's potty insert ( Babybjorn Toilet Trainer ) in the bathroom but all the toilet hooks available don't fit on my toilet. Decided to make a hook I could hang on the wall next to the toilet instead. I'm using a…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We buy the mesh sacks of BabyBel cheese at Costco, but they always end up either difficult to remove from the bag or strewn around the shelf. This dispenser neatly holds 18 small wheels of cheese that can be individually removed. This…
Wydruk około 1,30 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Baby Dragon - Multicolor Surprise Egg Figurine Category: 3D Printing, Multicolor Printing This cute baby dragon figurine is perfect as a surprise element and ideal for multicolor printing. The design is optimized for using different…
Wydruk około 3,58 €–4,37 € nettoWstępna wycena jednego wariantu
The Zócalo on Babylon 5 was a central meeting place in red sector where many characters would go to unwind, have drinks etc. The ice blue neon sign recreated here featured in many many episodes in the background. Through various forums…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When our little one had trouble sleeping, the gentle rocking motion in the stroller always helped. Annoying was only that he was always awake when the road was too perfect. With my rocking support you have reliable light rocking motion at…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Have a look at my other cookie cutters: https://www.printables.com/model/1076686-cookie-cutter-baby-01 https://www.printables.com/model/343340-snowflake-cookie-cutter-ejector https://www.printables.com/model/151672-beer-bottle-cookie-cutter
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tisk na dvě poloviny
Wydruk około 5,03 €–6,14 € nettoWstępna wycena jednego wariantu
Description This is a robust and sleek desktop stand specifically designed for the Babyliss Pro 4artist shaver series. Whether you are a professional barber looking to organize your station or a home user wanting to keep your shaver safe…
Wydruk około 3,07 €–3,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Baby Garfield pen/pencil holder. Add magnets and may be used for your fridge. Designed for MMU. Recommended settings: Layer height: 0.2 Mode: Speed Infill: 10% Material: PLA
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
Size: 5,1cm x 6,4cm x 1,1cm The sizes are approximately! Do you need other sizes? Contact us before payment! Ask us for custom designs! We are located in Buenos Aires, Argentina. We print 3D cutters, topper cake and more! Find us on our…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
A baby version of my Moggle model. Very easy to print. I do recommend adding a minimal amount of supports underneath the back legs toward the heel. You can also add supports underneath the lower jaw if you want. I have printed it…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
Our dog broke our gate (138 Inch Retractable Baby Gates Extra Wide, Uamector Mesh Baby Gate or Dog Gate,Toddler Pet Retractable Gate Adjustable Length for Large Openings Stairs Doorways Hallway Indoor Outdoor,…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
One of the biggest issues on my Babboe City-E is that i don‘t know where to put the heavy battery during charging. This wall mounted case should help you charge your City-E Battery nice and easy. If you want to fix the charger in the…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is ideal for babys tummy time to watch something colorful, that they can play with. Or for cats to destroy. Printing : Use 3 perimeters for the balls but at least 5 for the rest (for added rigidity), everything 15% adaptive cubic…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Baby Face Vance Meme.
Wydruk około 3,99 €–4,88 € nettoWstępna wycena jednego wariantu
I modeled this because I felt like it. Also I wanted to model my profile picture. I hope you enjoy it as well! If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
A colored ring to identify a bottle from several identical bottles (for example in kindergarten) DM Babylove Trinkhalmflasche 330ml Print settings: 0.2mm layer height 0.4-0.6mm nozzle diameter no supports 100% infill PETG is recommended…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted an ab roller but did not want to buy one because 2 day shipping is way too long! So I decided to print my own ab roller in 2 days and double the price of an ab roller. That's what we call efficiency me bois. Yeah, get that 8…
Wydruk około 18,81 €–22,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by this version for the round baby mobile arm, I decided to make one that fit our square version. Designed in Onshape , feel free to remix. Printed in PLA with supports and low infill which works just fine!
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
This may or may not work for your stairs, it's pretty particular to my staircase. Try out the test fit print first to save your time and filament. Here is a link to the onshape document where you can edit the diameters and spaces in…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena jednego wariantu
Baby stroller replacement for Break.
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
100x160mm sign, with art of log cabin and text reading “Grandma's House of Babes”. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest of my sign collection fit.
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
🌿 Modular Geometric Vase with Stepped Design Designed in SolidWorks | Ideal for 3D printing This vase combines modern geometry and natural functionality in a stepped design that highlights any type of plant, especially vines or hanging…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena jednego wariantu
I was playing DS and my daughter really got into the whole carry the baby thing and started to strap dolls to herself. So a decision was made one evening to create a BB pod carry case that can fit a 110mm long doll (or anything else). It…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
I had an old tv cable box above the crib and so wanted to hang the baby monitor up there and hide all the cables. I used PLA, 100% infill with supports. I wanted it to be as strong as possible to hold the monitor. There is a small (1mm or…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
Zrobiłem niestandardowy przedni zderzak do Babyape 2 w DarwinFPV
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Have fun playing with the Crystal Dragon or rather giving it away as well as positioning it. Print: Perimeter: 2 Infill: 5% Note: Nozzle as close as possible to the printing plate so that it can be printed without borders. Improvements: +…
Wydruk około 3,32 €–4,05 € nettoWstępna wycena jednego wariantu
A cute little baby turtle that looks great sitting up on two legs, standing on all four, or just laying down to get some rest. This is an easy print-in-place that has been carefully designed to require no supports, and (at just 6 cm long)…
Step into the enchanting world of 3D-designed articulable creatures with the Baby Dragon model by the talented Bearded Printer. This remarkable, intricately detailed 3D model serves as a fantastic addition to any dragon collector's trove.…
I'm really glad to present you the Glorious Baby Dragon For these Models I've used High Gloss PLA ColorMorph Filament made by Formfutura . That was the first time I used this Filament and the results are marvelous, I love it! Use the Code…
🙌By supporting my Patreon , I can continue offering free models. 🎁Get the 'Flexi Animal Keychain' Welcome Pack, the 'Flexi Dinosaur Keychain' Welcome Pack and May Patreon Pack exclusively on my Patreon (Limited offer). 🎈There are two…
Hi everyone! I’m excited to share a brand new model with you all — a cute Flexi Baby Dragon ! License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+…
