520 modeli
Bass fishing lures, Salt water fishing lures, Stick baits, Crank baits, Top water baits, glide baits ...whew. There are a lot of baits. And all of those baits are have a lot of sharp pointy hooks. If you are like most of us fisherpeople,…
UPDATE: The .stl file now has the slot in the tab! This is a very slight remix of the Dessicant container by @biketiger. Scaled to 150%, and added a tab with slot to easily zip-tie to the inside of your crab pot or trap, or shrimp, etc.…
I created some fishing lure holders for my 3 most used Rapala sizes and a spinner one. All I did was use 3M tape to hold them in place on my boat. So far no issues. I made them thicker at first to make sure they held up I might do a V2…
This is my first go at designing a full size printed Crankbait. I think the finished model and results (fish caught) where well worth the effort. The bait is printed in two halves and then glued together. (I used super glue) Three small…
3D Printed Mini Glidebait Fishing Lure The lure features a two-piece jointed body that creates a smooth, natural swimming action when retrieved. With a slim profile and slightly curved shape , it mimics a small baitfish, making it perfect…
This is version 2 of my Ultralight Crankbait. In this version I changed the shape a bit, added some gill details and it now uses preformed figure 8 hook hangers for tie on's. I used #0 stainless steel sinker eyes. You can get a 100 of…
This lure Prints in one piece and has multiple hinged segments that loosen up once the lure is bent back and forth a few times. This gives it a swimming action and it has internal chambers for adding metal bbs for rattles.This lure prints…
This is just another Crankbait I made.. this one a redesign of a lure I carved out of balsa wood 25 years ago. I'm still working out the best infill settings so this is a* "Work in Progress" * for now. I did a short write up on my website…
To be honest I've never really made lures before, I've modified spinners a bit and tied crappy looking flies before but seeing Marling Baits on youtube make the tiniest crankbait, inspired me to make a tiny crankbait of my own. I present…
Easy fishing form / mold for 16cm fish 6mm screw holes 8mm cutout for eyes Enjoy
This lure is my go at a 3d printed jerkbait which sadly are very rare to find on printables or thingiverse. I designed this off of the Westin Swim and gave it the same details. I would be very happy about some makes or even fish you…
3D printable mold to pour silicone 9cm Westin clones YOURSELF! No supports needed. Would recommend ABS/ASA at the minimum to ensure quality pouring without destroying the mold. You can print either the master itself to make your own mold…
Swimbait Fishing Lure mimicking the appearance of a minnow (lambari). This lure boasts an exceptional level of detail, featuring intricately modeled scales, lifelike fins, and a stunningly accurate gill area. What sets this lure apart is…
Required for assembly: 5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 5 mm eyes Super Glue…
This a a Dummy 13 Droidbait!!! that's all i can think of to say.😅
Jerkbait Fishing Lure Description: Discover the innovative Jerkbait fishing lure, specially designed for discerning anglers like you. This lure allows you to adjust the casting weight and balance individually – easily through the Bambu…
Easy mold for your lure have a nice day by water Enjoy
This is a clear lip version of my Crankbait Fishing Lure . I used the included lip template to trace and cut a lip out of .093 clear lexan polycarbonate sheet. * I used #4 Treble Hooks and #3 Split Rings on these. * See Crankbait Fishing…
NOTE - This is a failed project! I'm giving up on this design and moving on to other things.... I'm leaving the files up just encase anyone else is brave enough and wants to experiment with it. This is a Realistic Sunfish Jointed Swimbait…
This is a little “bait can.” It's about 58mm tall and 100mm diameter. The lid has holes in it for the little wormies. I have also included an alternative lid (shown in orange) that is a little easier to operate, and has larger/more…
My Youtube channel: LuresForAll https://www.youtube.com/@luresforall/featured You can watch me assemble it here: https://youtu.be/SQy0jy8JkJ4 You can watch me paint it here: https://youtu.be/DinvIs6oJjI You can watch it Swim here:…
Introducing the 3.5-inch Swimmin' Frog Open Pour Bait Mold! Designed with meticulous attention to detail, this mold from TheMakersWorkbench and Making Baits is a must-have for anglers and DIY bait-making enthusiasts aiming to create…
This is another lipless rattletrap type crankbait I designed. This is a little different then a normal type lipless lure as I tried to make the body a little wider in hopes it would maybe dive a little deeper or have a different kind of…
FREE 1-page Glide Guide (recommended before your first swim test) Want the Top 5 tips to make your first glide swim right? Grab the FREE 1-page Generic AF Glide Guide → https://mailchi.mp/a695a4acc986/pr-glide-guide (Instant PDF + if it…
The Double-Sided Spinner Bait Tackle Box has two compartments with lids to store 15 lures with a max length of 95mm. The compartments are designed to securely hold and protect each individual Spinner Bait from damage or tangling. The box…
To assemble: Print the model. Glue 3 or 4 BBs, depending on how hard you want it to float, into each of the 4 weight chambers. (Leave a few loose if you want the bait to rattle) Bend and glue wire in for the line tie and hook hangers.…
Ground bait ball maker Its quite important to have your bait on the right spot when fishing, with this tool you can make round balls from your (moist) ground bait or soft pellets. Fill up the ball maker and compress it. The slot in the…
I have created this printable maggot model for use as fishing bait or just for good old-fashioned pranks. Printable with filament or resin. A flexible material is probably best to use. The printed model is about 22.5mm long by 8.9mm tall…
First try designing a fishing lure, been making them for years from wood, but decided to model one, so everybody could use it. -it is wire trough lure, made for 0.8mm wire -i haven't printed it yet(I'll update you, as soon as i make it)…
This is a remix of my Realistic Sunfish Jointed Swimbait Fishing Lure. I'd given up on that design but after learning about printing on fabric and making several other swimbaits that worked I'd though I revisit this design one last time.…
Fishing 14.5cm twister lure form / mold
easy printable mold for 9cm fishing lure 6mm screw holes Enjoy
Here you can print and assemble a grate fishing bait boat. This filles contain all printed parts models, main code and other files, for full assembly you need to buy additional parts. In my example i use a ESP 32 cip, and a custom board…
~75mm crank bait in 4 pieces with wight/sound chamber. Print the following pieces 1 x Left 1 x Right 2 x Pin Add wire to hold hooks, glue, ad the right size hooks and go catch the big ones! and to add the extra toch, paint it in your…
Ants-Be-Gone parametric model was created in OpenScad using the BOSL2 library . The design is inspired on an existing commercial solution, Ants-No-More ®. All dimensions were based on the product descriptions that I've found over the…
Simple top filling mold for new rubber bait a simple way to recycle your old and torn baits, just put your rest of baits to bowl and put it to microwave, then just pour that rubber to this mold, we are using abs or nylon bacouse of heat…
This is a flat side Crankbait type lure. I found a simple pattern online for making them out of wood and decided to duplicate it in CAD for 3D printing. There are two versions of this one... the first one I printed looked awful skinny so…
This is a bait station for insects, in other words, a container that houses insecticide or poison in a way that's attractive and accessible to insects, but less accessible to pets & other wildlife. I was prompted to design this station…
check out the new version link -100 percent infill -glue tail on to body
easy printable practical fishing lure mold / form for 5,5cm rubber fish
Easy to print mold for your own fishing twister lures Enjoy
It's autumn and the mice are heading back inside. Time to give them a treat. This mouse bait station will hold bait up to 30x30x60mm. I print with supports only on the hooks that snap the top to the bottom. The rest of the overhangs print…
Fishing lure / mold 13cm twister with belly 8mm eye cutout screw hole 6mm Enjoy
Rats are crazy smart, and the success of a snap trap is often determined by the angle from which the rat tries to take the bait. This housing forces the rat to come at the bait from the front, putting it in the optimal position for…
A container with a lid for use with Nippon liquid ant killer gel. There are two types. One design with a screw lid and another with a push-on lid. Both seem to print well for me. Dispense a small amount of ant killer gel into the base,…
Printable fishing mold for rubber fish (Top filling) Enjoy
This is another swimbait that I am working on using the same fabric printing technique as my last swimbait. This one is modeled after a rubber minnow swimbait so it only has three sections. More info and build pictures can be found here…
This is an Ultralight Swimbait that is designed to entice almost any type of fish. The swimbait 2 ¾ " long and is my best design yet. I have tested the stresses and have found that it can hold about 15lbs (6.8kg) max as long as you print…
! Flexible materials are suggested ! Scalable +50% infill Supports needed Painting is suggested Add supports as shown below
My first atempt, its not perfect but on right way. Added holes to screw in mini hook holders. And there is 3x8mm holes in middle of body sections if needed to add more weight with steel balls, weight can be added manualy in the middle of…
Overall length: 230mm Please model the lure vertically. It is already jointed, so please model it as is. There is a weight room in the width section. Use M3 nuts and M3 screws. The dorsal fin and tail fin should be modeled with TPU.…
This model is similar to my shiner swimbait but it is based on a actual lure. I designed this model only using Fusion 360. I like printing all my lures in 0.1mm because they don't take too long to print and it gives better looks. Once you…
These Ultralight Crankbaits were inspired by rallekralle11's tink crankbaits they are just a little more stream line but being so they don't have as much action (wobble) as his. They still work great and I caught a ton of Bluegills and…
Required for assembly: 5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 5 mm eyes Super Glue…
To assemble: Print the model. Glue 2 - 4 BBs, depending on how hard you want it to float, into each of the 4 weight chambers. (Leave a few loose if you want the bait to rattle) Bend and glue wire in for the joint hardware, line tie and…
Easy printable dragonfly form / mold for fishing Enjoy
Inspired by: https://www.thingiverse.com/thing:2463713 A more agressive Version of the Original I re-designed the whole thing from scratch, so measurements will differ, i also taylored it to materials i use for the hook hangers ect. Main…
after my cat got into this station, I would now recommend my own from-scratch redesign, with a clip-on lid . — Strictly speaking this is of course not a trap, rather a bait station, i.e. a small container to apply poisonous bait for…
This is a refillable insect bait station designed to attract and trap ants, cockroaches, and similar pests—while keeping pets and curious paws out. The low-profile entrance allows insects to easily access the bait, while the enclosed…
This versatile fishing lure is designed for customization, featuring internal cavities for adding weights (up to 11 mm in diameter, 2x), as well as a dedicated cavity for steel wires to secure your fishing line and treble hooks. For ease…
Fishing lure / mold 18cm nymph for predator fishing 6mm screw hole Enjoy
This is lure is based on the striped shiner, these fish can be found in Central North America (From Ontario to Louisiana). The model is fairly scalable, if you decide to scale it up, I would only recommend going up to 300% and no further…
easy printable fishing lure mold with promo code :)
This is a baitcaster fishing reel with a 3:1 ratio, Need supports. Also needs glue/welding.
Printable mold for a crawfish bait for fishing. Print the molds in PLA or ABS for good Silicone molding results. You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know!
Lil Cranky Swimming Crankbait The bait runs about 0.5m deep, length is 45mm. I recommend using an SLA printer to make one, but it might also work with FDM, didnt try that though so if you do it, please tell me how it went! The belly is…
Update 1 July 2024: Fixed a symmetry issue Removed the unnecessary air chamber Changed the design of the weight chamber, it now accepts 3 x 6 mm balls Made it thicker to hold more weight For print orientation, check the 3mf file with…
Easy to print mold for your fishing lures, hoof 6mm screw holes 6mm cutout for eyes Enjoy
Instructions 1 - Print both halfs 2 - Insert 4x3 4mm lead BBs to the triangular lead holes 3 - Cut 3 pieces of Filament to use as alignment pins, insert them into the 3 alignment holes. Use epoxy glue to mate the two shells together 4 -…
easy printable fishing lure mold for 10cm fish
This is a simple lure. Assembly will require some hardware from your local fishing tackle shop. The points for the hooks are indicated by the circular bases in the ideal locations. Changing infill density will change the depth and…
I finally decided to publish some of the lures I designed and rapid prototyped a few years back. This topwater stickbait / pencilbait has a length of 7cm / 3'' and weights approx. 7g / 1/4oz without hooks. I already caught many perch and…
Baitcaster reel. Love it on channel catfish.
You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know!
This is a remix of one of my best producing crankbaits. Injured or wounded bait fish attend to attract more bites so I added a nice bite to the original crankbait (more so for fun) but maybe it will turn up the bite also…. The build…
Imprimé en PLA à 40% pour être sur de ne pas déformer le moule. Pour plus de détail en 0.12
Helps to hold dough baits such as Power bait onto single hooks. Designed for hooks #6 and smaller. Just hook the holder onto the hook and form the dough bait around the holder. This model scales well if you need to use for other size hooks.
EDIT: If you download and don't post a make, shame on you. UPDATE: A new version - v10 - is now available. Printed it in PLA, looks good. Changelog: Bottom filleted (to prevent loss of digits!!! :)), as suggested by maker. Cover knurled…
This is a hard bait storage container that can be used on both sides. It can store metal jigs, minnows, egi, etc. that are less than 100mm long. There are five compartments on each side. Each part requires some support due to protrusions,…
Bait boat auger. Intended for use on bait boats used in carp fishing. This one fits on the Carp Madness XXL Bait Boat Kit. The size of the auger allows for 8 mm pellets to be used. I haven't tried anything else yet, eg. wet particles. It…
Ants will not leave my kitchen alone, so I left some nice Terro ant poison treats for them, inside a little coffin-shaped box that makes it clear what I hope the outcome will be. :) I am normally friendly to insects, but having these…
Fishing lure designed mainly for trout spinning. The main body contains slot for the bent wire montage, which is filled with epoxy glue, and fin support that can be easily snipped off with pliers. Main body is made from PLA, with max. 30%…
Box to safely hold Tomcat Bait Chunx mouse poison bait. Designed similar to the Tomcat brand boxes to prevent larger animals and pets from getting the poison. The mouse is able to get into the box, eat the bait, and leave. I printed in…
DIY Lure basket to screw into the top of your A24 Automatic Rat Trap made by Goodnature. They sell something similar for about $5 but for some reason it's not available in my region. 14-1-24 - Uploaded an optimised version which has 45deg…
This model is similar to my shiner swimbait but it is based on a different fish and it has 3 segments. I designed this model only using Fusion 360. I like printing all my lures in 0.1mm because they don't take too long to print and it…
A holder for Baitcast fishing reels
A small swimbait mold that i made for ice fishing baits
Print with infill above 15%. Use supports. 2 treble hooks. 2 split rings. One swivel. Extra filement. Super glue to secure it.
I couldn't really find a rotating drying rack for baits that I liked, so decided to make one. You should be able to orient objects to print with no supports. I pretty much printed everything at 0.2mm in PETG. Print the Motor Adaptor at…
Inspired by: https://www.thingiverse.com/thing:2463713 A more agressive Version of the Original I re-designed the whole thing from scratch, so measurements will differ, i also taylored it to materials i use for the hook hangers ect. Main…
For bait boat or feed boat made by china it can replace your boat's propeller cover with a better coverage to prevent propeller tangel with weed or trash Category: R/C Vehicles
Background: Inspired by the likes of the classic “mielie bomb” used when fishing, especially for carp, I wanted to design a funky mould. I decided to work around the shape of a grenade model I saw: Grenade MK2 WW2 Design: The design…
Forma na výrobu gumených nástrah - twister
Suggest to use 5 mm inner brim while printing.
I bought six boxes (standard bait stations, availiable everywhere) last summer and got also six keys. I lost five of them until winter, so I wanted to copy the last remaining key... I already tested the printed version, it works ;-)…
Fish Hook Bait Boilies Wafters Roller Table
