350 modeli
~ Design collaboration with Azurefilm ~ A nature inspired plant pot! We hope you enjoy it as much as we did design it! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
My take on the hubs needed to make a geodesic sphere. I made this sphere to act as the outer cover for an RGB LED light ball. Essentially, I want to make a big ~60cm RGB snowball winter decoration. My plan is to wrap this sphere in cling…
Works with: Maxtrax board from daver18qc . Note: The board is 1/8 (not 1/10 as described), don't resize it! Mount it on the: roof rack with 4mm diameter (print part A+B) sideways on the car body just drill the holes on the body of the car…
I made this quick model to support some small weaker plants. Push onto bamboo skewers to form the needed support. I use them in a triangular fashion as seen in the pictures. Intended for round skewers with about 3 mm diameter.
Rear Bumper with winch from Aliexpress and Hitch for trailers. https://www.aliexpress.com/item/4001275874900.html?spm=a2g0o.order_list.0.0.519018028Aaak2
This is a cute panda/bamboo plant guide/climber that fits in any planter/garden! Every piece can print in place without supports, and the bamboo sections are set up so that you can print however many pieces you need (just make sure to…
funny kung fu man the instruction is a picture you need two 50 cm threads and a gap where you can control it
These side brackets are for my Venezuelan red tail boa to have something to climb on in her tote! I use bamboo for Snips to climb on so far so good. .30-layer height and 150% print speed. I used a solder iron to burn holes through the tub…
Bamboo wind chimes I have long wanted to model the shape of bamboo, because I like vases or flower pots with this pattern. This competition gave me the motivation to do it. For the first time, a pretty good result. I hope to create more…
An attractive little bridge designed so that the main platform appears to be constructed of a series of bamboo trunks, supported by elegant curved beams, and fit with hand rails to ensure safe crossing. The bridge is intended to be…
Une jolie étagère zen avec un design de bambou en fond. J'ai mis 2 fichiers, un avec les trous pour accrocher au mur si vous mettez des visses et l'autre sans trous. A imprimer à plat sans support. Impression avec une hauteur de couche à…
A very minimalistic but beautiful bamboo inspired plant pot for your plants. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Model turned out great on 0.20 layer height. You should add supports where you think its needed. Keep in mind to reduce flushing volumes in order to save material and keep the printing time optimal.
Printed using Creality PLA HyperSpeed. No specifc configurations are nedeed. Left: Remix Version Right: Original “Nameless” Version Enjoy Samurai!
Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…
This clip holds three lucky bamboo sticks in an aquarium
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
Snuggle up with the “Panda Holding Bamboo Keychain” – a cute and easy-to-print accessory that features a lovable panda. It’s the perfect gift for those who love these gentle giants, capturing the cuddly and calm nature of pandas in a…
Bamboo Cottage Miniature – Fantasy Jungle Hut for Your Tabletop World Step into the heart of a tranquil bamboo forest with this charming Bamboo Cottage Miniature ! Featuring a layered thatch-style roof, bamboo supports, and whimsical…
Printed at 0.2 layer height with supports.
Solid layers - Top / Bottom (0 layers) Infill density: 30% Infill type: Honeycomb Perimeters: 2
Just glue the 2 sides together.
Bamboo wind chimes Bamboo wind chimes two rows, realistic bamboo shaped . Another model in the Wind chimes collection . Bamboo tubes in two rows. A little more patience when assembling, but the result will satisfy you. The hanging parts…
I followed this tutorial in blender and made the leaves fatter for 3d printing. Print with no supports. Recommend using a brim and scale up as big as your printer can go. Designed to fit in this demo vase:…
Here's a modular jewelry holder that can be customized to your liking. There are different trays as well as stems for your needs. The design mimics a potted plant and can bring some interesting scenery to your room. The leaf in the model…
STL Files for cosplay Nezuko Kamada. Minimum Printer Volume Required: 150 mm x 150 mm x 150 mm Fusion 360 Link: https://myhub.autodesk360.com/ue2cc9c06/shares/public/SH56a43QTfd62c1cd96834708fce14d8b039 Category: Costume
This is how this 3D printed instrument sounds. Ok, to be fair. It does not sound good. The fact that I don't know how to play it does not help either. But it makes funny “boing” noises, so I'm happy with it. Print it with PLA, it has a…
I grow hot peppers, and when the seedlings go out from the propagator, they sometimes need some support, therefore this was the motivation to create ones. I can get for a cheap price bamboo sticks from various diameters (3.38mm, 4.00mm,…
After trying some of the bamboo dart molds available and finding them lacking, I decided to make my own. Yeah I know Worker makes nice metal molds but shipping and cost just didn't work for me. I tested multiple mold shapes until my…
This model is compatible with the lego system.
A simple model for the bamboo of Nezuko Kamado from Demon Slayer. My daughter is dressing up for Halloween and the one included with her costume was pretty bland. This has a cutout to make it comfortable and a hole to tie the red ribbon…
Can be used for the a1 or a1 mini
A minimalist bamboo-inspired pen holder designed for easy 3D printing. This model features a simple cylindrical shape combined with organic bamboo-like details. The slightly varied top profile gives it a more natural and less uniform…
!!!!! Please read before building. This is a metal geared axle and transmission conversion for the popular 3Dsets Landy, Rancher and Bamboo. Axle ratios are 3:1 to 4:1 the original 3Dsets axles are only 1.8:1. The axles and transmission…
I love the Shishi-odoshi style fountain, but, wanted something a little more authentic. I took one of the bamboo pipes from 'Bamboo Zen Vase' I cut open the end of the pipe, and then added a little to it to close it off and add some…
This 3D printed planter combines a clean, modern silhouette with a surface texture inspired by bamboo canes. The vertical ridges create a natural, handcrafted feel reminiscent of eco-friendly materials, making it both decorative and…
Because I broke the original servo arm. I made a replacement.
A bonsai pot planter with decorative bears and bamboo
Based on two growing seasons experience with this design, I strongly recommend printing this with TPU or another Flex filament. This script uses the customizer to create joints for a bamboo garden trellis or plant cage Customizer is…
This 3D printed wind chime features a modern, organic design inspired by fluid motion. Design Aesthetic : The assembly consists of six vertically suspended chimes, each featuring a unique sinusoidal ripple profile that creates a dynamic…
GT2 Belt Gearbox for Landy/Rancher/Bamboo 3DSets models. Use it with my Metal transmission, gears and axles mod This gearbox has a ratio of 4:1. Paired with the AR44 33/8T gears, it is the same overall ratio as original 3DSets model. You…
This is what I have made for my kids to play with. Simple design for connecting bambooskewers in diferent directions. You can cut sticks in different lenghts, I have cut them to 8 cm. It is smal part so use brim.
This model allows using bigger 3S2P custom battery packs made from 18650 cells in the 3DSets Bamboo (Model 13 - Winch Truck), model available on their site: https://3dsets.com/product/model-13-bamboo-4x4-winch-truck/ Side fuel pipes are…
The real stuff For my Bamboo4x4 I wanted a fully functional roll cage just like the 1:1. This is it. The cage fits the Bamboo4x4 Model 9 & 10:…
Minecraft bambusový raft Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Correctly aligned feeder slot components make life a joy! See how , in under 5 minutes. Quit fighting to align each of the 15 parts correctly. For only $0 (or 24 easy payments of $0/month), download this alignment tool. Who needs slicing,…
I wanted to use the bamboo A1 brush but with bucket attached to it. I really don't like small plastics flying all around when cleaning the nozzle. (My voron 2.4 is a 300mm build). Credits to the author →…
Simple standoffs to orient things using the FIXIT system. Uses 2.7mm bamboo skewers (has a 3mm hole) to adjust height between the base clamp and a cup. The cup holds plasticine or bluetac to secure most things pretty neatly. Designed for…
This model is not ready to print. You have to add modifier to create mesh for moisture at the back of the nest like in the picture. I also uploaded Prusaslicer project file(.3mf). This should be much easier, you just open it with…
Made to fit the Bamboo Land cruiser. May fit others. Color change G Code below
Modification of the Muf flaps from Markus https://www.thingiverse.com/thing:5279377. Use the modification of the exhaust from Markus please.
These connectors are designed to fit 5mm bamboo skewers. These are for building a geodesic dome. Print instructions Unassociated tags: bamboo dome, dome connector, dome connectors, geodesic connectors Category: Toys & Games
Adapter um stoßdämpfende Gummifüße aus dem Bambo Lab Zubehör (https://www.amazon.de/dp/B0CKWWSGK4) an anderen Drucker etc zu verwenden. Ist für M5 Schrauben ausgelegt
Two bamboo-themed inserts for Takenoko. One (print it 3 times) for bamboo sections, one for blue watering pipes. Version 5 of the tray is easier to print, yet less cute, than V4. Deux boîtes style bambou à insérer dans la boîte de…
Simple Frontlight Glass for 3DSets Bamboo Rc Car. Depending on your printer it should snap in place. Might need a superglue. Use concentric top & bottom layers for more realistic look!
Example For a dome with a diameter of 90 cm (as in the cover picture; banana for scale), you benefit from essentially only two strut lengths (92,5 and 81 mm), and you can also use standard 20 cm bamboo sticks ( reference ) with minimal…
Dracena (Lucky Bamboo) holder for aquariums This is a holder that clips on the back glass of an aquarium to that can hold Dracena stalks (Lucky Bamboo). The internal diameter of the circular section is 11 mm. The opening of the two prongs…
This is better Toyota logo for the grill, other ones i found on the internet uses wrong “font”..
FITS GLASS 5mm AND BAMBOO MAX 16mm IN DIAMATER This Is a hang on the glass style Holder For lucky Bamboo. the bamboo plant I have is from IKEA but make sure to measure your plant before printing to make sure it fits. print upside down,…
The original by @hennery was a little funky to slice and print and I needed the inside cutout to be a bit deeper to fit my build. Here is the fix. Video on YouTube.com/3dprintsos Enjoy. Category: R/C Vehicles
This remix has a 13mm hole which can fit a Bamboo stylus. Print Settings Prints fine with all default profiles. Set the resolution to your desired quality.
Vase for a lucky bamboo in it's test tube. There is a cutout on the bottom side, where you can glue in some weight to help with balance. It is not necessary when the bamboo is straight enough. You might need to file any imperfections off…
This is a traditional bamboo copter. It's simple and prints in 23 minutes. I would suggest printing it on its side because printing it upright leaves the shaft very weak. TPU is too heavy and PLA is too brittle. I would suggest using…
I only have made a four dart mold of the tight fitting 3 ring model, if you want other models as a four dart mold from the original model then comment which one and I will get it done as soon as possible! To use the four dart mold push…
Filament clip version 2 … small and simple Since no existing clip worked for me, I created the first version of my own clip . Some users were a bit bothered by the fact that the filament had to be trimmed so that it wasn't too thick at…
These Decorative bamboo really added a green touch to my room and made it feel more cozy. Important Look at the sliced view carefully before you start printing, as some sizes with some print settings can leave floating parts. Available…
All parts print without supports and you thread the chimes through the frame to create the final completed windchime. Print at 0.28mm layer height and if using Bambu Studio set your wall generator to Arachne. For a standard print you need…
A holder for the Wacom Bamboo Ink 2nd gen stylus, designed to fit into your USB Port. The holder provides a small gap for the buttons to slide through. The holder is designed for the Wacom Bamboo Ink 2nd gen stylus but other pens with the…
CASA DELLE BAMBOLE GT1 Realizzato:www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
Basically just a wooden PLA, U shaped trellis I made to resemble a curved piece of bamboo. Scales up or down easily and doesnt need a lot of infill but id recommend at least 15% to be safe in case you have the urge to flex it like I did…
BAMBUILDI Modular Bamboo Stick Construction Play Set A good friend of mine asked if I could print her some bamboo sticks to make a miniature trophy for a bamboo building contest out of. I liked the idea, plus I wanted to see if I could…
i took it from bamboo labs
Fan: dimension: 30x30x10mm hole distance: 24mm hole diamenter: 3mm You would need: 4x M3x12 screws option 1: electronic switch connected to Receiver https://www.aliexpress.com/item/1005003353247323.html option 2: soldering the +/- wires…
For my SLAB the prefered dart is “BAMBU THIN”, printed with the tapered end facing the bed, on soft tpu with 1 perimeter, no infill and no top layers so the tail can expand a little and seal better, i still included the other variants,…
Modification of the front light to the Bamboo. I use this from Ali https://www.aliexpress.com/item/32817402471.html?spm=a2g0o.order_list.0.0.21ef1802Uj6Mr0
Modification of the front frame of Bamboo for this winch from Ali https://www.aliexpress.com/item/4001275874900.html?spm
Simple poop collection device. Attach with double-sided tape. Can be used with any plastic bag. support on build plate only
Remove supports from fully cooled print
Convenient to carry as three pieces during travel. Since the vertical height is less, chances of the body falling off the bed during printing is reduced. Print the three pieces vertically. Remove the supports in the holes. Assemble! Some…
Introducing the Bamboo Grove Vase, a stunning centerpiece that captures the essence of tropical elegance. This vase features a textured bamboo-inspired base, perfectly complemented by a striking monstera leaf design. Ideal for adding a…
Sticking with the green filament at the end of it's roll: I present the Bamboo Bag Clip. This is a simple clip that is for holding bags closed and has a bamboo plant motif. The working space (length between the hinge and clasp) on the…
This clip on print allows the Engine cover from Print 42 in the 3DSETS Bamboo 4x4 files to work on a brushed 540 motor. I printed this in Prusament PETG Galaxy black. I have a 55T motor and runs cool. I have not tested on any other motor…
We designed this bee hotel for the bees in our yard, so we could add in natural materials to attract pollinators. Designed for 6 inch cardboard or bamboo tubes available on Amazon. We designed it for and ordered these cardboard tubes and…
This is a Bamboo inspired by GAG
Using bamboo sticks to make a climbing help for plants for example for clematis or ivy. Up to 8 Sticks. Two Versions: Flexfill 98A PLA, PETG, ABS update: Added more Version of the PLA version x2 x3 T x3 Y x4 x5 so you have the choice…
This is a corner joint for Φ2mm bamboo stick, actually for Japanese popular craft material "tahkeh-hiigho" which means bamboo-let. Printed in 1/10 size because I changed only proportions of lizard00's model so the diameter of the model is…
I liked the design of the suet ball holder by @ivyMike , as his design allows to feed fat to the birds without the commonly used net around the suet ball. Those nets are dangerous for small birds an. d unnecessary waste. So it is good if…
Simply, but modern chopstick holder inspired by bamboo structure. Easy to print in vase-mode or: 0% infill 0 top and 0 bottom layers 2 outter layers Happy printing!
This is a plant stake designed to look like bamboo. It can be extended as well so your growing plants have support.
This is the first version of my leaf spring conversion for the 3dsets bamboo. i modeled this of of the model 10 (hardtop) should work with the model 9 as well. No promises that it will me a direct fit for the pick up or winch truck. This…
this my castom project for Lamy safary fountain pen.
Prints in vase mode. Fill with water to simulate mass of the real thing. Print with Vase mode 0.4mm nozzle 0.1 mm layer height 0.6 mm extrusion width
This bamboo-inspired lamp emits a soft and soothing light, creating a warm and relaxing atmosphere for any room. Its modern design perfectly blends with natural elements, making it an ideal decorative piece for homes, restaurants, or…
This is a mounting plate for shackles and other accessories with a 10x10 mm bolt pattern. It reuses the original mount points of the Bamboo4x4 rear bumper pieces. Hex nut cutouts are for M2 nuts (4mm socket). I've printed the part with…
