Liczymy pasujące modele…
Customizable and now also stackable beer crate for all types of batteries: The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries The 9V-crate can hold 5 Batteries The 18650-crate can hold 6 Batteries but is 18mm higher…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
Its a battery holder. Made by fafabienman from https://www.thingiverse.com/thing:3358129 I did not make the model I'm just show casing it. Print instructions I printed this in 0.3 layer height and no supports did a good job and pretty…
Wydruk około 3,30 €–4,03 € nettoWstępna wycena jednego wariantu
Rescaled battle droid that prints in parts and fits together as it does in its original LEGO form. This .stl is 400% of the original size. Can be scaled to any size ! This size is perfect as a single pen holder ✒🖋🖊🖌🖍 I printed these parts…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
A set of battery boxes to store AA, AAA, C, D, PP3 (6F22) and 23A batteries. You can print one size at a time and I've included the .3mf and GCODE files for the Prusa i3 MK3/S using PETG which is a great material for these boxes. Also…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stackable and now also with labels: beer crate for batterie and accumulator storage. The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries These crates are to 100% compatible to my original files. The Bottom is universal,…
Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu
Battery Missle Launcher for AAA and AA batteries This print is split into multiple parts so there are a few details you can print in a different color if you like. The .3mf's are already labeled in my suggested colors, I am looking…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Update 10-23-2022: Now there are files for a version of the box that can be printed with the Prusa Mini! Print 1 lid and 1 box, and snap them together at the hinge. I printed mine at 0.32mm layer height with a 0.4mm nozzle. it took about…
Wydruk około 32,53 €–39,76 € nettoWstępna wycena jednego wariantu
This is a two handed battle axe for Dummy 13. It is about 80x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
3D scan of skull found on the Battle of Visby, where on 27th of July 1361 the Danes fought Gutnic Peasants. The human skull found at the Battle of Visby is a grim reminder of the brutality of medieval warfare. The skull shows clear…
Wydruk około 29,95 €–36,60 € nettoWstępna wycena jednego wariantu
Yes I know, it's tempting to use a discarded PC fan as a solder fume extractor, but it usually doesn't do the job quite well. That is why I opted for an industrial fan with impressive specs. The Noctua NF-F12 industrial PPC-3000 PWM has…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Simple but sturdy storage for 10 CR2032 coin cell batteries. MK3 has a few minor improvements over the original/MK2: Lip to hold the top on Thicker dividers to make them stronger Slightly more clearance to make coin cells easier to remove…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
držák baterie Parkside na zeď
Wydruk około 4,02 €–4,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
Storage boxes for coin cell / button batteries Also included customizable Fusion360 parametric model (battery size & quantity) Printed on modified Ender 3 at 0.2mm height
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Replacement battery cover for the TCL Roku RC-AL5 remote control. This model appears to be dimensionally accurate but is a very difficult print. It requires supports at any orientation. If you have a successful print and fit, please let…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
I created this model because when I tried to replace the battery in my Wahoo Tickr the cover's pins deformed and snapped. It would no longer seal with only two pins available so I designed this replacement cover for myself. I went through…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Ryobi 18v Battery Holder
Wydruk około 2,35 €–2,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by the model created by Pico, I created new model which better matches size of the original cover and also of the sealing ring (diameter approx. 25.5mm). Model created in OpenSCAD.
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Now out! The HMS Hood that was sunk by the Bismarck! Get your model here: https://www.printables.com/model/776292-hms-hood (Printing and assembly instructions below) The German battleship Bismarck! Named after Otto von Bismarck and the…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
A simple battery cradle with a color change to pop out the brand name. Can be standing on your bench or mounted on the wall. The infill is strategically modified to withstand use and mounting. Open hex pattern allows you to press and see…
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
This is a remix of Tabb's Button Cell Battery Box from Thingiverse. It's a box for CR2032 and LR44 batteries. I have added four places where 4x1,5mm magnets can be fitted. This is a remix of this object:…
Wydruk około 3,85 €–4,70 € nettoWstępna wycena jednego wariantu
Parkside battery adapter for Ryobi tool. Mixed two pieces of work together, I admit that. Did some modifications so they fit together. You need to print: 1x top 1x bottom 2x clip And extra: 4x 6.3mm Faston male crimp connector, "blue"…
Wydruk około 6,42 €–7,85 € nettoWstępna wycena jednego wariantu
Combined stackable beer crate for AA, AAA, 9V Block, CR2032 and a empty crate for batterys. The crate needs a support geometry at the bottom.
Wydruk około 1,71 €–2,10 € nettoWstępna wycena jednego wariantu
Here you have another large 80cm filament print of a robot. This one is based on the Cylon character “Centurion” from the Battlestar Galactica movies and series aired in the 70ies & 80ies of the last century. The original 3D model was…
Wydruk około 16,10 €–19,68 € nettoWstępna wycena jednego wariantu
Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena jednego wariantu
Battery Cover replacement for Roku Ultra remote model RC-EL3 Print horizontally with curve up, requires supports. This will reinforce the locking tab. Be careful when removing supports to not damage the bottom alignment tabs.
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Printed in PETG at .20mm slicing on a prusa mk3s+. The battery is shaped for the larger EN EL-3e battery. But will still fit the more common and smaller EN-EL15. It should fit a 70mm diameter by 3mm thickness O-ring if you would like to…
Wydruk około 6,75 €–8,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MItutoyo 500-184-20 Battery Cover
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
GoPro Hero 10 (9) Battery Cover | Cold Shoe Version available Simple and fast to print cover for the GoPro Hero 10 (and 9) to allow charging while recording. Useful for long video recordings or time lapses. The Cold Shoe variant is useful…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Tired of walking away from your DJI FPV Goggles with the battery still in your pocket. I made a simple clip that will attach to the headband of the goggles. Depending on how tight of a fit your battery is, there is an additional clip…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
!! ATTENTION You can't scale the model as the battery size needs to be kept. I would suggest to do min. 4 top layers as I only used 2 which definitely is not enough as you can see on the pictures. For the infill I did 8% Grid. You can go…
Wydruk około 5,56 €–6,80 € nettoWstępna wycena jednego wariantu
Layer height: 0.15 Initial Layer Height: 0.4 How to get great quality: Legs and arms must be printed vertically (Be careful to not F*ck up with Z axis) Slow the printing process (I did on 120mm/s) Tree support is a must 10% infill 65°…
Wydruk około 9,32 €–11,39 € nettoWstępna wycena jednego wariantu
Don't you hate the way most coasters don't catch the condensation coming off your ice-cold drink? Well, this coaster is just what you need! A beautiful coaster that will protect your coffee-table or desk while you watch Battlestar…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The two parts of the jetpack must be glued. Requires adapter (included) between grip and hand.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Intro After purchasing a GoPro Hero 10 with some additional batteries I realized that I have nothing to carry those batteries in. Well… Instead of buying something I designed this small case to store my additional batteries and MicroSD…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
If you're looking for a replacement protective battery cover this is it. Print settings: Printed in PLA, .6/.4mm nozzle, .2mm layer height. Will print solid with a .6 or a .4mm nozzle if printed with 2 walls and at least 3 top/bottom…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Plate locks the Nest doorbell down, replacing included metal plate. Use the key: https://www.printables.com/model/466189
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
1 & 2 Nikon EN-EL15 Battery Protection Case
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My daily use 1s LiPo battery case. Very lightweight at only ~35g per case. It fits any pocket. I can keep track of used and unused Lipos by taking new ones from left to right. It does fit the charger/Lipo-checker from BetaFPV. 450 and 550…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Battery Packs! – AA/AAA This is a simple, fast-to-print battery pack that uses 22 gauge solid core wire and aluminum foil intended for powering breadboards or small electronics. Once the wires are fastened the material will flex…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Box comes in variations for AA/AAA types and holds upto 2/4/8/16/30 batteries. Model is pretty fast to print, with 0.6 nozzle and 0.40mm preset it takes around 2:30 hours to print. With PrusaSlicer 2.5.0 alpha3 1:37 hours. 0.40mm preset…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was not able to find a pin cover for the battery connector of my eBike (Pedelec) to buy. There are models available for the earlier Bosch system, but I didn't find any for the (new) Bosch Smart System (BES3), hence I designed my own.…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A screwable Battery Case for 3 GoPro HERO 5, 6 or 7 Batteries
Wydruk około 5,50 €–6,72 € nettoWstępna wycena jednego wariantu
I needed some 21700 spaces for a DIY-Lipo battery I'm building. Couldn't find one on Printables, but found one on Thingyverse from user keepydroj: https://www.thingiverse.com/keepydroj/designs Link to the model:…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
This is a version of my design for AA batteries, available here . It features two improvements to the AA casing: a slightly higher resilient element and a single hole instead one of the the grooves on the negative side. A battery box…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Brim (Recommended) Supports needed Scale it as you like :)
Wydruk około 6,71 €–8,21 € nettoWstępna wycena jednego wariantu
Description Replacement for battery cover for Soviet electronic games (Электроника ИМ - clone of Nintendo Game & Watch ). Can be used for all game device, e.g. : NU, POGODI! / НУ, ПОГОДИ! TAJNY OKEANA / ТАЙНЫ ОКЕАНА VESJOLYJ POVAR /…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
4 versions 14.6 mm battery hole and thread for M3 and M4 screw. 14.8 mm battery hole and thread for M3 and M4 screw. I used M3×10 and M4×12 screws. 🔋IKEA LADDA Rechargeable battery, HR06 AA 1.2V, 2450mAh – version 14.6 mm. 🔋LIDL TRONIC…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
I think Ryobi is missing a huge market opportunity. I have a ton of Ryobi Tools and Batteries (1000+ Wh worth!). I've made several prototypes that use Ryobi 18V batteries to charge USB ports or run a 13.8V regulated cigarette socket. I'd…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Simple battery box 4 280ah lifepo4 cells. Bottom and sides but no top YET. Hope it eliminates the need for banding cells. Cells are 174mm by 72mm by 207mm tall. Printed on CR6 Max with pla+.
Wydruk około 67,47 €–82,46 € nettoWstępna wycena jednego wariantu
There are two options: simpler, thinner version bit bigger v2 with small grips for more comfortable use I recomend to print without supports but enable all option showed below You probably should print it with supports if you want make…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Print out of PETG for best results. Makita battery holder used and improved over the last couple of years. The rugged design holds up to construction site wear. Designed a wooden carry handle to mount the battery holder.
Wydruk około 3,79 €–4,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you sticking your nine-volt battery in any old drawer unprotected? Do you feel a burning sensation afterward? Experiencing unexpected discharge? Practice safe battery storage with our revolutionary new nine-volt battery protector and…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
A battery holder for Hilti B22 Battery for the workshop, garage or your work van. Importen info about Gcode: It print with a 2mm brim to add strengh to bed. I just took a deburrs on the bottom edge and it was perfect after. The 2 holes to…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 10,39 €–12,70 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
This model is a SKADIS holder for Dewalt 20v Batteries. It uses the SKADIS T-Clip system designed by @LineArcLine . It is designed to be easy on and off, bypassing the latch.
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
My friend Bill asked me if I could make a cover for his RAD Power Radcity Step-Thru eBike ( http://rwrd.io/iuf9jqd?c ) battery connector. When he has his bike on his KAC car bike rack ( https://amzn.to/2TjTn1m ), he removes the battery.…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ryobi battery mount with option for electrical connections. Wall mountable with two flat head screws. Easily store spare batteries on your workbench, or connect them to other electronics (maybe a battery backup for your 3D printer ) See…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A little cover for the amazing Customizable & stackable beer crate for all types of batteries by CAD-Guy. I used the material reduced bottom from Antimaterie but increased the height to get more grip inside the crate. I used the lid to…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Would appreciate your make, a like and/or voting ;-) The wonderful Muli cycle carrier bike (https://muli-cycles.de/de/bikes/motor) has one weak point. When the bike is set out to rain/ wet weather-conditions, water tends to stay in the…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Stackable Gridfinity battery bins. A 1x1x5 bin that fits 9 batteries laying down, this bin is directly stackable. A 1x1x3 bin that fits 8 batteries standing up, in order to be stacked it requires a 1x1x3 spacer A 1x1x3 spacer. NOTE: The…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
This is a AA Dummy Battery. The included gcode prints in two colors for a more realistic appearance
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
The stock battery mount on the Happymodel Mobula 8 likes to break after some not-so-soft landings and snaps where the two crossbars connect to the side of the battery holder. This model replaces the crossbars and hooks into the sides of…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
INNER BOX SIZE 58X100X56MM PRACTICAL BOX WITH SEAL AND CLOSING CLIP FOR STORAGE OF SMALL ITEMS. To assemble the box you will need 3pcs M3x30mm screws. Print out the battery box insert and you can store AAA and AA batteries in the box.…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
This is a basic file I designed to hold 9 volt batteries. The reason I designed it was to make sure that the battery contacts did not short against each other in the drawer. It holds 14 batteries and should fit in most drawers because it…
Wydruk około 3,07 €–3,76 € nettoWstępna wycena jednego wariantu
This Model is designed to be mounted on different surfaces with M4-screws. It also has a self-locking-mechanism.
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
A great battery machine for AA batteries. The arm and base body must be printed with support geometry (everywhere). You need a knife to break out the support geometry where the loose part will later be inserted. But that should just work.…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Introduction This module is part of the Storage Tree project . In case you've come across this model and are unsure of where it fits or its context, let me bring you up to speed... What is the Storage Tree or Modular Storage Tree. What…
Wydruk około 11,70 €–14,30 € nettoWstępna wycena jednego wariantu
This is a single piece remix of the awesome AA battery launcher model. No need for assembly anymore, just print it and use it. You do need supports though. I recommend using paint on supports as per the second image, with "snug" support…
Wydruk około 16,67 €–20,37 € nettoWstępna wycena jednego wariantu
Souhaitant la poser sur un mur exposé aux quatre vents et non protéger de la pluie, je lui est conçu une petite maison qui est adapté avec l'angle de 25° ( v2 et sans angle fichier plat v2) du support fournie avec, ils permettent de…
Wydruk około 8,08 €–9,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This hardware will allow for the MASTERFORCE 20-volt battery mounting capabilities to a wall or inside a toolbox etc. Prusa Mk4 Input Shaper 5.0.0
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
A tool to aid in the installation and removal of the lower AAA battery in a pair of Sordin (formerly MSA) Supreme Pro-X electronic earmuffs. If you own a pair of these, you know how annoying it is to change the batteries because of the…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
I made this so I could have my FPV goggle battery in my pocket to take the weight off my face while flying. Things you will need: 3x High Capacity 18650's (I used 3 NCR18650B's) 3s balance lead xt60 Male for battery, and female for cable…
Wydruk około 5,40 €–6,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to fit a voltage converter model number: 4KX 18V Makita Battery Adapter: See my design here https://www.printables.com/model/436132/ 18V Bosch Professional Battery Adapter: See my design here…
Wydruk około 7,66 €–9,36 € nettoWstępna wycena jednego wariantu
This dual battery holder fits perfect with longer 18650 / 18700 cells. I made some changes from the Thingiverse version (thanks to Shadow8286 )because the original could not hold my 70mm long cells not very good and it was hard to…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall Control - Milwaukee M12 CP Battery - Dual Mount
Wydruk około 2,86 €–3,49 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Customized version of https://www.thingiverse.com/thing:48235 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=48235 Print instructions Category: Organization Instructions Using the following options:…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…
Wydruk około 4,57 €–5,59 € nettoWstępna wycena jednego wariantu
I hate having to unclip my batteries to remove them from storage and liked the look of this model. So, I decided to remix it to my tastes. The indent removal allows you to slide batteries in and out easy! The slight upward angle will help…
Wydruk około 4,15 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
old cover broke out after 12 yrs in service, so I made a new one in TPU
Wydruk około 0,73 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
14500 Battery Case Do you have some 14500 batteries and need a case for them? Well then look no further for this is a 14500 battery case! Its perfect for keeping up to two batteries together in a handy case so you dont need to worry about…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A wall mount for a standard ego battery charger, but mounts the charger at an angle to allow for better space efficiency on your wall. Required Parts 2x M5 Heatset Inserts 2x M5 Thin Head Bolts:…
Wydruk około 9,71 €–11,87 € nettoWstępna wycena jednego wariantu
I usually leave one battery in the drone, so I need a case for the remaining two batteries. This is smaller than the triple battery charger, so I do not need an extra guard for the control sticks. The upper part is glow–in–the dark,…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena jednego wariantu
This battery cap will hold itself in place with small tabs “hugging” the Battery posts. The specific design is for the N70T Deep cycle design. This deep cycle battery has secondary smaller 8mm threaded posts for attaching inverters, solar…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Customized version of https://www.thingiverse.com/thing:48235 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=48235 Print instructions Category: Organization Print Settings Printer Brand: Prusa Printer:…
Wydruk około 2,54 €–3,11 € nettoWstępna wycena jednego wariantu
