133 modeli
Info: glasses temples bent more behind ear than https://www.printables.com/model/205857-fun-nerd-glasses-with-interchangable-lenses-choose so glasses are more safely positioned for usage with :…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Super quick and dirty - I took Evolution80's original model and rotated it in Blender 90 degrees so the 3030 mount and the sheet holder are now parallel with each other. It works as support for the unsupported end of the sheet, and as a…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
for use with a VESA pattern monitor in my case I needed to mount my laptop behind a monitor with the laptop's screen exposed as an addition monitor the monitor was an HP L2245WG (22", I think) which had its own stock monitor stand I…
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
Filament : Devil Design. Green Transparent. PETG 0.20mm. Infill : 15% Gyroid. Nozzle : 230c. Bed : First layer. 85c. Other layer. 70c. Support : None.
Wydruk około 4,04 €–4,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusament : Galaxy Black. PETG 0.20. Infill : 15%. Gyroid. Nozzle : 240c. Bed : 80c. Support : None.
Wydruk około 4,13 €–5,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Filament : Devil Design. Vanilla PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : First layer. 85c. Other layer. 70c. Support : None.
Wydruk około 4,07 €–4,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dyson vacuum cleaners - Extension to suck behind cabinets and crannies. The gCode files are created for the Prusa mini. I used a 30mm Gardena pond tube as a hose. German: Die gCode Dateien sind für den Prusa mini erstellt. Als Schlauch…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
These funny Easter bunnies show themselves from behind, so you can see their funny little tail. Strung on a string they decorate our yard gate. But there is also a small version for inside. Body and tail are put together with a clip. You…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
The eyes are designed in a neutral fashion - you choose whether they are evil or just watchful by picturing the rest of the feline. Cat's gonna cat ;) I printed this in PLA, 0.2mm layer height, 15% infill, but this is a very simple…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena jednego wariantu
Filament : Devil Design. Green Transparent. PETG 0.20mm. Infill : 15% Gyroid. Nozzle : 230c. Bed : First layer. 85c. Other layer. 70c. Support : None.
Wydruk około 3,66 €–4,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…
I have been looking for a way to mount my 17" Laptop behind my Dell 27" monitor using the VESA mount for quite some time now. The models I have been able to locate wouldn't work due to my monitor's VESA mount being recessed vs the general…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
I was looking for ideas to cleanup the desk a bit and found a great model for attaching laptop behind a monitor using VESA shelf. Unfortunately I'm very impatient and once I've seen the 18 hours print time of original model and amount of…
I wanted these kind of hands for windows but was too lazy to cut them from paper, and why should I, when I have a printer! These are not live size, as you can see from pic, but if you have large enough printer, you can always scale! I…
Hello, this is our Bltouch Mount for Anycubic Vyper and Kobra Plus and Max. With this board you can use the bltouch print and play (klipper): https://aliexpress.com/item/1005004281432549.html Source files:…
This is a mount that attaches to the back of your TV to allow you to mount your Xbox Series S Console. It's designed with 100mm and 75mm vesa hole patterns. Works best with 16mm M4 bolts. If installed in the correct orientation, it has…
Remix of Reolink RLC-520 junction box without hole on the side. All cables comes from the back side in this case.
a custom stand for a kamvas 13, this stand fits between my keyboard and monitor stand base. the measurements are for my setup so its free game to do whatever with if your into the remixing thing. printed on its side so no supports are…
The Remote Holder contains two remote controls one for the TV and a smaller one such as decoder / audio system etc ... All to hang behind the TV, the bracket is not universal given the different characteristics of each TV, but it can also…
First file is a hook I made in order to hang my recovery strap behind the back seat from an existing spot in the truck. Second file is two hooks which suspend a cheap harbor freight toolbox behind the back seat, they hook into metal loops…
You print 6 pieces of this, stick them onto the back of the mirror (80cm diameter Ikea LINDBYN Mirror) using some high quality double sided tape, then glue some LED stripe all around it. The pieces are designed for a 300x300 bed.
I designed this thing to place my laptop behind the monitor whilst still using the monitor arms.If the monitor does not have the vesa mount flush with the monitor surface you can use the spacer. The position of the laptop monitor is not…
Behind the axle shock towers for 50mm RC4WD shocks and drift spindles including drill guides for the aluminum drop axle
I created customizable hook/holder for Surgical Face Mask. Its open-source and FOR EVERYONE!!! I recommend to measure the size of the head between the ears +2 cm as atribute "velikost" and change atribute "delka" for right size cut.…
This model is compatible with the lego system.
The mount for the Apple TV is universal and can secured to the back of a TV using any hole in the grid pattern. The mount can be used to hide the Apple TV behind a TV. The VESA mounting points can be used or any other hole on a existing…
A housing to put the rear view camera on the car roof just behind the sharkfin antenna. Placed here the camera is kept very clean, especially on hatchbacks where the rear of the car gets very dirty very quickly. The full height versions…
ok 3rd time uploading and describing this thing (Thanks Thingiverse's glitchy interface) So... This is an Ear Hook for a Siemens Signia RUN SP behind the ear hearing aid. My wife is very hard of hearing and we bought a Siemens RUN SP…
I liked Mr. Freakman's design, but wanted the volume buttons oriented so Plus was on top and Minus was on bottom. Added some through-holes for my particular wiring setup, and added a third "prong" to hide the wire. I had to buy my own…
To hole my Macbook on the Vesa mount. Cable is not long enough to put it far away under the desk or something. This way the desk is free. Print it standing on the side for strength. Use a big brim! And tree support on the lower edge.…
Made to prevent drafts from around the LCD screen
Mirrored version of @RedWish's EBB36 PG7 Mount behind NEMA14 stepper
Once upon a time, there was a curious and adventurous LEGO figure named Max. Max had always dreamed of catching the biggest LEGO fish in the world, and he was known among his friends as the most daring fisherman in town. One sunny day, as…
Easter Bunnies to brighten your day! This fun light switch decoration can easily slip behind a light switch wall plate and stay in place securely with the built in mounting slats. The two bunnies depicted in the print are busy hiding…
"Acceptable" fill piece to replicate the look of a U33B. LOL NOTE: I PUT MUCH TIME AND EFFORT INTO DRAWING PARTS AND SHARE FILES FOR FELLOW MODEL TRAIN HOBBYISTS TO PRINT FOR THEMSELVES AND SHARE WITH FRIENDS. PLEASE DO NOT SEEK PROFIT…
Simple minimalist insert clip into vents slot behind the dash screen to brace objects such as tissue box. It's designed to place the box over the horizontal segment of the insert so that the weight of the box will ensure the teeth on the…
this is a holder for putting a kleenex box behind the tesla model Y's screen (tested on 2024 model). it fits a kirkland tissue box by default printed at .2 layer height in PETG
Funny Sign - “The Sooner you fall behind, the more time you'll have to catch up”, multi colour print, printed in ZIRO PLA Glitter Diamond Purple and Sunlu Matte white PLA. Complete with recesses for 10mm x 1mm magnets to make the sign…
I wanted to mount my laptop behind my monitor but my monitor is on an arm. Couldnt find any Vesa mounts compatible with this. V1 is what is in the photo as it works well and i didnt see a need to reprint but i wanted the tighter laptop…
This can either be a black and white wall hanging or you can print it out in black and white and allow your child to color it in. You'd then have a piece of art they created to hang on the wall. Add some magnets and it can also be hung on…
A clip that you put behind tables of various sizes, which makes the cables almost invisible
*Fits common monitor back profiles as the 4 contact points are slightly curved. Placing a rectangle of M3 double sided tape (or equivalent) causes the tape to deform, thus matching the monitor profile perfectly. For better cooling,…
is was specifically designed for the Logitech C615 but I'm sure it can work for many more models as the mounting part seems likely to be standard for a wide reference of webcams, and fairly easy to modify to fit specific references. Also…
Revised behind grill trim that does not have a place for logo in the corner. meant to replace the original behind grill trim in a previous design.
I needed a simple Hook for my headset from work. The solution was a quick Tinkercad Sketch. The Hanger is mounted on the backside of the monitor with the help of a Tesa Powerstrip. It extends 4cm from the edge of the display and even my…
Mounts the Apple TV 4K behind the TV. Should work with all. models of Apple TV because this is the tallest model. Uses two M3x10 Flathead screws and two M3 thin square nuts. Files are oriented for printing. No supports needed.
I wanted to hang my headset somewhere hidden. So I created this hanger to hang it behind the monitor. There it is hidden, but always available. Print without support when rotated 90°, but use low layer height (0.14 mm) to get good overhang.
This is a mount to screw on the wall and screw the ring doorbell mount on top of it, so you can pass some usb flat cable behind it.
Mounts tilted between spacers from: https://github.com/chirpy2605/voron/tree/main/general/PCB_Mounts/STLs/G2SA
Led strip mounts for mounting the Philips HUE led strip behind an L profile, for a few different mounting angles. The dimensions used for the strip are:
This model dates back three years, but I felt it was time to share it now. Back then, I was reorganizing my room and looking for extra storage space. That's when I noticed all the unused space behind the TV 😁. So, I designed this Vesa 200…
== Aha moment == There's so much unused space behind my pc screen (Lenovo ThinkVision T24i-10) that I though it would be the best place to have a Multiboard and hang some of the things laying on my desk. == Problem == Drilling the screen…
The fit is quite tight so cables need to be relatively thin for this size and need to bend enough. The idea is to hide the cable holder behind the tabletop. No support needed.
Print: PETG 100% infill for a more sturdy outdoor reliable hook. Install: Slightly unscrew gutter screws on both side of where you want to insert hook. Use plastic spudger (wedge) to slightly bring gutter out from fascia. While gutter is…
I use an Acer monitor with vesa mount adapter I got off amazon. As a result, there's a pretty wide gap between the back of the monitor and the actual vesa plate. These two adapters slide into to that gap and provide a shelf for the…
Filler ring for around GAMMA Everest afdekplaat afdekraam. (Wall Outlets) Sizes : Single, Duo, Triple We bought these outlets, but later discovered they have an strange design on the bottom, keeping a gap open. Where unsure if this is…
A beautiful minimalist painting of a Moon behind the clouds on the wall or with a stand on the table. Size 200 x 190 mm You can find the small print stand for the table on my profile ↓…
This is a holder for the BLTouch / 3DTouch sensor meant to be mounted behind the radial cooling fan. Initially I designed this for my Anet A8 in combination with the "Mistral 2.1a" fan duct from user Neo_N (…
I wanted to have some solution to mount my smart bulbs behind my montitor screen. I have ordered some lamp holders and desigend this to mount them with doublesided tape to my monitor. Product I have ordered: https://amzn.eu/d/3xCEp3e
Created for Gravel Bike Shimano SPD 520 Pedals Tires 42-622 (28x1.60-700x40C) Print Settings Rafts: No Supports: No Category: Sport & Outdoors
I created this to hold my Octoprint SBC behind the screen of my Ender 3. It simply slides into the rail that the screen connects to. To install: Remove the two screws that hold the screen to the frame and move the screen out of the way.…
I made several variants of the model. The whole part in one piece. Or if you don't have enough printing space, split into two parts. If you are going to print two parts it is a good idea to glue them together afterwards for strength.
This is the gear inside of the gearbox connected to the spinning shaft that is attached to the agitator.
I have tried modeling a field/sand/drag harrow for towing behind my Traxxas Trx4 Defender, just for playing around on the local lake beach while my son plays with his rc boat. It turns out quit fun but could be improve upon. First, it…
I remixed a model to work on my windows with blinders. Feel free to remix it as well for your own needs.
This is a ps4 mount in 3 pieces ,( 2 upper, 1 bottom). This is to mount it behind the flat screen so it can not be see in front. The console ps4 can slide in place and can be removed by sliding it out. You can insert cd games in the slot…
Made this to tidy up my desk space by hooking the monitor's power adapter on my monitor arms. Printed with Creality Ender 3. Layer height 0.2mm, 15% infill, no support needed
This design is intended for a square tissue box holder that fits discreetly behind the interior panel of a Tesla Model Y and potentially the Model 3, given their similar interior layouts. The holder consists of two parts: a box and a…
Detailed 3D printable Baby Dragon Badly Hiding Behind A Small Mushroom figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
I made this because any handy chair have easily became clothes storage for a long time. This mounts to the back of a bookshelf (i use them to partition of a part of my living room as a sleeping area). You need some 20 mm OD / 17 mm ID…
"...yeah, no ****. But I believe we can outsmart and overthrow him if we work together. Don't be predictable and selfish!" -Lost Tapes: Clyde Category: 3D Printing
This is a simple VESA mount holder for the UGREEN M.2 NVMe SSD enclosure. It allows you to securely mount the SSD case behind your monitor using the VESA screws, keeping your desk clean and your storage easily accessible. The enclosure…
Serpentine Pencil Holder - snakes behind a monitor
This model uses 40cm height table feet with an M10 screw for additional/adjustable height and mounting of a 15°-angled base “mount” element. On top of this, a plate that acts as a stand for the speakers is screwed on the mount. Requires…
Charging bay accessory: organize & hitch cables of various sizes to any desk surface (with double-sided tape)
Der TAC Verlag bietet eine Variante für blinde Spieler mit Karten mit Brailleschrift und ertastbaren Spielsteinen. Wenn man aber bereits ein TAC Spiel (für sehende) hat müsste man das komplette Spiel noch einmal kaufen. Außerdem gibt es…
Shelf for VESA 200 mm with small holes for cables and USB port.
LED fixture holder designed to mount directly onto the back of a desk. It positions the light fixture upward, creating a wall-washer effect that enhances ambient illumination. Also the gap allows cable routing without affecting light…
You can carry a second battery for your Snaptain drone in this simple pouch. It makes use of the bottom screw holes: without modifying anything, you can jam the two prongs inside the screw holes and it'll sit flush against your…
Led lighting behind couch / furniture. Holder for sticking on a led strip. wanted indirect lighting behind the couch. I don't want to stick the led strip to the furniture for that. I used it to process my filament leftovers. Because…
This mountain with the cross on top of it is designed to be placed behind the "Winterhaus Resort", the Battery pack can be placed down below. The moon stander can be set between the two mountain parts, they can be glued together.…
This Laptop holder can hold Laptops like my work laptop which is a Lenovo P16 Gen2 (workstation Laptop which is quite thick and heavy). The gap for putting in the Laptop is 30 mm wide, which is enough only for the P16 in case it is…
English: This is a rotatable headphone stand behind monitor. The model is mounted on a dual monitor arm behind the monitor. The dual monitor arm is the ARMBARDUOG model from www.startech.com. Please refer to the photos and pictures for…
A fastener-free hook to slide behind window trim and hold a plant
This is a base for ProClip MagnePro magnetic phone holder. You can use any other ProClip phone holders, they all have the same installation base. It inserts into niche behind shifter and sticks there like a wedge. Printed in PETG because…
HueForge: artistic, depth-mapped multicolor 3D prints that reveal stunning images when backlit; share your creations and
I am somewhat meticulous about organization and prefer not to have visible objects that are not used continuously; a pen cup on top of the desk is one of those things that bothers me. To solve this, I designed a hinged pen holder that…
Bracket to mount 4-port USB charger modules as found on aliexpress or ebay behind a front panel (e.g. https://www.ebay.de/itm/404355496586). I printed the model on an Ultimaker S5 with default settings and no support. Adding support may…
This model was designed to solve a very common problem: my washing machine does not sit flush against the wall, and small items kept falling into the gap behind it. Retrieving them always required pulling the entire washing machine…
This is a mount for a 18mm inductive probe. It will mount the probe behind the extruder using 1x M5 screw and nut, so you will have enough clearance to add whatever you want. Print Settings Printer: K8200 Rafts: No Supports: Yes…
Some discreet way to get hooks under your LACK
Some simple bins to screw to the top of a work bench or desk to hold tools, cables, parts, etc. in the often-present gap between the wall. These bins were tailored to my printer (Prusa MK4S) and the gap behind my workbench, so the best…
![Behind Monitor Laptop Mount [VESA]](https://media.printables.com/media/prints/461644/images/3800372_a8e03d34-47e2-4f99-9f55-b4e548e7313c/c13d1eb6-f583-4119-9a7d-c1831b8698e7.jpg)
