104 modeli
The stock Elecraft AX1 and AX2 clip for the bipod is very stiff, difficult to attach, and hard to remove. At the request of a fellow op, I designed a better one. Here it is. Print in PETG for flexibility and durability. Print the clip…
Print the feet in as soft TPU as you can, I printed mine with 60A TPU from Recreus, the softer the better the grip. The M3 screws will thread itself. BOM M5x20 2pcs - For legs M5 Locking nut 2pcs - For legs M5x40 1pcs - For picatinny M5…
-remixed model - stronger and more massive body, resized bolt and nuts holes, remixed foots //3.1.2023 now printing model for test //4.1.2023 tested result OK, added photos. -Hardware needed: M6x20 2pcs - For legs M6 Locking nut 2pcs -…
A nerf bipod attachment that I made a few years back, not my best work but it serves its purpose
This is a printable bipod suitable for light duty, such as an air gun or 22LR. I based the design loosely on the Magpul bipods but there are some notable differences. I have prioritized compactness, as this bipod is intended to be used on…
This is my take on the popular Copepod hideout that hopefully aims to increase printability while maintaining a safe and accessible sanctuary for Copepods when placed in a reef tank. This is version one, and I recommend increasing…
Its a bipod. only hardware needed is a m4*25 nut and bolt the legs also fold. yay
Parts List: m6 nuts - 4 m6x30 bolt - 2 m6x40 bolt - 2 Print Instructions: Add a pause in the g-code at the top of the nut cavity in the base.stl so that you can insert two m6 nuts and continue the print, encasing the nuts into the part.…
I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…
I designed this foldable, springloaded Sub- Picatinny Bipod for nerfing. Sleek, slim design with the curved long slot serving as end stops. Hardware used: M2 or M2,5 for the end stop bolts M3 to secure the Joint and the foot to the leg…
Flip 180 degrees for ease of printing. Required 3 heat set inserts and 3 M3x20 screws. Secure with 3m double sided tape to prevent from rotating
A fairly simple bipod that uses some elastic cord to have bistable legs (The legs have two resting places) you will need some 4mm or 5/32" elastic cord I also made some actual instructions!
Bipod, tht can be attached to bottom of the magazine.
These are bipod legs that work with the AX1 clamp that was created be K6ARK. you can find the clamp here on pintables. https://www.printables.com/model/626212-elecraft-ax1-ax2-antenna-bipod-clip-knob
Bipod for air rifle. Made for my son who can't hold a rifle by himself yet. Layer height: 0.10 mm
Use two M3x10 Caphead screws and two nyloc nuts I had problems printing this with Arachne enabled and my 0.4 nozzle, the perimeters didn't fuse, so I had to use classic perimeter generator.
Print on it's side, with supports, to ensure maximum durability of the loop.
This is a remix of the bi-pod ( https://www.thingiverse.com/thing:1478754 ) as designed by Martialmedia but now for a 16 mm barrel. I also increased the thickness of the "pivot points" to make it a bit more sturdy You will need a M4 bolt…
-= Русский =- Сошки для пневматической винтовки. Все отверстия сделаны для винтов М3 и гаек М3. -= English =- Air rifle bipod. All holes are made for M3 screws and M3 nuts. Category: Sport & Outdoors
A bipod adapter to use any generic bipod on your airsoft M249. Tested on CA, should fit A&K. Maybe G&P. Does NOT fit Specna (thanks Fandaboi)
Umarex NOTOS picatinny rail , full length with block screw tab to fix it to the rifle. A more refined version of my first one. Now uses the block screw to attach . Slips over air cylinder on the Umarex NOTOS air rifle adding a pic rail to…
The developer, “Blinsky's Toys” continues to spread joy throughout the world by bringing you a brand new toy. The “War Caster” is an adjustable bipod designed to attach to a picatinny rail and fold out of the way for storage. That means…
Всем привет. Нарисовал два вида крепления Пикатинни на глушитель пистолета Hatsan Mod 25 Supercharger https://www.e-katalog.ru/HATSAN-MOD-25-SUPERCHARGER.htm На данную планку можно установить сошки которые можно сложить или разложить при…
Fixed Bipod for Hatsan Flash QE PCP Air Rifle. No extra tools or hardware required to install. This design is not meant to fold up, but comes off the rifle easily enough. Bipod slides on to the front Picatinny rail and is held in place by…
FX Dreamline Bipod Mount with Picatinny Holder / This adapter does not require screws.
This is a simple yet effective bipod for my arisoft sniper ASG Zastava Varmint M70. I made this using Solidworks 2016 and it works very good until now. It could be used on any sniper rifle like VSR10,Varmint M70 etc or with any sniper…
Bipod can be used to hold counterpoise wire for Buddistick or buddipole. fits into buddistick pro carrying case. can also be used to hold wire antenna ends off the ground. using 3/8" x 4ft fiberglass rod post (I purchased mine at tractor…
Logitech Streamcam bipod Use the original streamcam laptop mount as a desktop bipod ^^ Pass the mount through the shirt and slide the legs. Cam can tilt and pan, as if it was a neck. No screws, no magnet, slide in place.
Print in 0.16mm layer, 5mm brim no support except for: The slider - print on side with the hole rising through the model and support the angled tip. The stock support - lay on side, support to the overhanging section that is not sat on…
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
Everything can be printed, except: two M4 screws and nuts the two rubbers for stabilization plastic adhesive You'll need one "befestigung", one "stabrechts" and one "stablinks". Furthermore you'll need two objects of "stabverbingung", two…
check origional for guide, but its fairly straightforward.
Всем привет. Нарисовал два вида крепления Пикатинни на глушитель пистолета Hatsan Mod 25 Supercharger https://www.e-katalog.ru/HATSAN-MOD-25-SUPERCHARGER.htm На данную планку можно установить сошки которые можно сложить или разложить при…
Slightly better than the original version I made a while back, can be used right after being taken off the bed. Basic model has 100mm legs while the longer version has 150mm legs. Might make a stronger version that can use pipe or dowel…
Mount for bipods. The normal version fits on normal picatinny rails and the short one is especially for:…
I just installed an Arca Rail on my NRL22 rifle. My Bipod used a Sling stud mount and I when putting an arca quick release on there was a bit of a gap that I figured would possibly cause the mount to shift if it loosened up at all. So I…
I wanted to be able to attach/remove my Magpul Picatinny Bipod quickly and without tools, so i came up with this thumb screw and had it turned by a local company. Please note: this is not meant to be 3D-Printed. In a pinch, printed screws…
Harris Tilting Bipod tilt lock lever for the new style large diameter ribbed knob. Hardware: 1x M4x20 button head cap screw 1x M4 nylock Please see my other designs for a lever for the old style small knob.
Heavily modified version of the A&K Adapter since that one wouldnt fit on the G&P model in multiple dimensions. Field tested and extremely sturdy when printed (at least almost) solid.
This is a novel design for a printable joystick bipod that utilizes compliant mechanisms (flextures) for movement control. Design The mechanical design of the flexture allows for fine grain control of vertical and horizontal movement via…
My co-worker was about to buy one of these for $40+. I casually mentioned that we could probably make one with a little bit of luck. Lo and behold, here's the product. A Picatinny (Pica Tinny?) mount with a camera tripod mount threading…
Adjustable bipod powered by bungee cords intended to be put onto Nerf blasters. The legs are adjustable by a clip which interacts with some rungs on the rotating legs, this part is fully functional. There are two orientations you can…
This is a shortened version of Tony's bipod on MakerWorld. The reason I shortened it is so that it is possible to use it in a prone position without shooting the treetops :P The original model can be found here: Rifle Bipod 200mm with…
This grip for the Umarex Notos airgun has dual functionality for precision shooting with its 5 position adjustable bipod and vertical angled foregrip. The optional foregrip provides improved ergonomics and control for off hand shooting.…
Atlas Bipod Tension Wrench - You ever lost one of these at $40 a pop? I have, print one and lose pennies instead.
Swiveling feet for magpul bipods. Files are in STEP. so you can modify the attachment point and feet to your needs. Printed in Petg with 30% infill. With supports. Havent tested the durability yet. BOM 2x M3x20 socket head screw 2x M3…
Airgun tripod because guys can't hold a gun. M6 threaded rods from the store. Estimate and cut with a saw as needed. Self-adhesive foam rubber holds the tripod on the rifle. Possible modification for a bipod. NOW it's a sniper gun for…
Bipod for a rifle Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No Resolution: 100% Infill: 20% Filament: PLA PLA BLACK Category: 3D Printing
Maybe you've got a tonne of cash and absolutely splurged when you purchased your Accu-Tac bipod. It's awfully tempting since they're an absolutely awesome piece of gear. … but maybe you really were stretching your budget and removed a…
I needed to make a bipod mount for my Umarex Hammerli Hunter Force 900 Combo airgun. I downloaded the bipod from here: https://www.printables.com/pl/model/357606-bipod-for-picatiny-retractable/comments I made three variations of the…
Keystone Sporting Arms Crickett bipod mount. I removed the sling adaptor, and added some screws and nuts I had. Its very solid, no flex, very durable. Could be used for flashlights, grip, whatever. Printed with PETG CF, 25% infill, 4 walls.
Prints in two pieces for ease and strength. Requires (2) KeyMod rail hardware commonly found on Amazon/eBay.
The collab we've all been waiting for, Bruce LeedleLeedleLeedleLee x Bruce LeedleLeedleLeedleLee
Harris Bipod Tilt lock lever for the old style small knob Hardware: 1x M4 x 18mm button head cap screw 1x M4 nylock Please see my other designs for a lever for the new style of knob.
A nerf bipod attachment
PL- wykonany do wiatrówek by zamontować go do obręczy od lunety 22mm do lufy. różnice- poprawiony rozmiar otworów, zmiana typu umieszczenia.
combined two models and made the legs thicker The lock block is too loose
I had a half functioning Trimble bipod that required some additional bits. A quick measure up and a bit of design in Fusion 360 and its now working great. Prints were done in PETG and are working great. The button measurement is 20.75mm…
Bipod + RIS adaptér pro pušky airsoft L96
2ximbus M4x35+2x matice M4 2ximbus M6x25+2xmatice M6 1ximbus M8x40 matice bezpečnostní M8 alu trubka 15x1x 270mm 2xkulička D5 2xpéro D5x1,25x10mm 6ot
Press M-LOK t-nuts into the bottom of the adapter. Mount the adapter to your stock using the outer holes. The outer holes accept machine screws that fit your swivel stud holes. Try to find button-head screws as they will have a low…
I did a silly goof and lost the clamp thingie of my Magpul Picatinny Bipod and needed a replacement. I used a buddie's Bipod for taking measurements. Note: this replacement part is not intended for serious long time use. It is designed to…
I made a M9 Bayonet with a bipod inspired from Battlefield Friends / Battlefield 4. The bipod is attachable with two screws. The knife is only inspired by a M9 Bayonet and not a 100% correct model. Things you need in addition to the 3d…
I bought an Amazon bipod last year, for Mlok mounting. Now I want to have an Arca rail mounted bipod. So I bought an Arca clamp on AliExpress , but to mount it on the bipod I needed an adapter. So I designed this one. It fit's this Amazon…
Mount for Parker's Adjustable bipod for the Shinkansen Smiley. Makes use of the holes in the front end for heat set inserts. It's designed for m3 screws, length dependent on the type of heat set inserts you put in. Please check the…
Keep the legs of a MTNGear Backcountry Bipod secure and stop them from making any noise.
bought a foregrip bipod off wish for dirt cheap and it didn't come with the insert for a picatinny rail so I made one. printed rail down with supports held in with super glue. Category: Hobby
Simple lever that snaps onto the harris biopd leg adjustment knobs.
Needs a 25mm M3 screw and nut. carfully pry the printed clamp appart to get over the saftey pressure release brass screw (you can also take it off it you want, but you have to tighten it proper when putting it back in place or your will…
Teile für ein einfaches Zweibein für magnetische .47 inch / 12mm Aufnahmen, z.B. für Blaser oder Spartan. Filament TPU Shore 98A 0,4mm Düse 0,25mm Schichthöhe (Structural) Infill 20% geradlinig Benötigter Magnet: Stabmagnet Ø 8,0 x 20,0…
A simple three piece bipod for Nerf blasters! Simply insert legs into main piece, or just use main piece as a short bipod. Print one main piece and two legs. Should fit all nerf rails. I printed mine in PETG @ 0.3mm layer height.
nonfoldable testversion for my fg-24 Category: Props
Air rifle clamp on bipod, requires parts as per creators link. Pellet Pod - Clamp on bipod for air guns with 15mm barrel by martialmedia - Thingiverse Only addition i made was to superglue some rubber inserts into barrel to increase grip.…
Some small upgrades to the original Nerf Bipod by Ttotheman STL pre oriented to recommended print orientation Changes: Added m4x6x8 heatsets to connect joint to bipod + feet to leg (adds robustness) adds optional 5x3mm tube to strengthen…
Bipod / tripod foot to suit BOG gear tripod. Mimics basic shape and function of the original foot when the extendable leg was lost / broken. Designed to be a tight press-fit interface with the ID and OD of the main tube. Printed with…
This is a knob attachment for Harris picatinny mounted bipod. Allows you to hand tighten the mounting nut This will require the use of a soldering iron to heat set the knurled nut into the printed part. print in orientation shown
Remixed folding bipod for the Minelab Vanquish metal detector range . Designed and tested on a Vanquish 460 , with expected compatibility with: Vanquish 340 Vanquish 360 Vanquish 440 Vanquish 460 Vanquish 540 Vanquish 560 The detector can…
Bipod P-SKI Feet for Accu-Tac clone need: four M5x16 screws with 6 washers Printed with Gyroid 20% infill and PLA-CB
This adapter(convertor) is for Ruger 10/22 Target Lite to mount an CVlife adjustable 7.5–9inch rifle bipod. Since the stock on this rifle has a non-standard, flat profile, this adapter is needed. I think it should work with other bipods…
On the RPK CYMA CM.052, the bipod attachment to the barrel broke into several pieces. It is irreparable because it is made of an aluminum alloy that is not very strong... and CYMA spare parts are very rare. So I recreated the part. My…
These sliding bipod bases are designed for a Chinese copy of the Accu-Tac SR5 QD bipod. This version does not require mounting screws; it simply threads directly onto the M5 threaded stud (headless) found on the Chinese Accu-Tac clones.…
Front picatinny to 20mm clamping bipod adapter. After print, drill through hole with 6mm drillbit and fit apropriate hardware for re-enforcement. Rear nut groove is for a 10mm nut and other side is also 10mm (i had to drill also that side…
These may be too flimsy for use (Thank you Gabriel_4178917 for the feedback). I myself have not printed/tried these as they were made in response to some others critiques about the legs being to short. I would recommend printing at 5…
The mount on my bipod from China broke after a short time and I could no longer use it. I reconstructed the part and it works like the original. I used ABS as the material and I don't think it will work with PLA. Bei meinem Zweibein aus…
Bipod to be ziptied Infill 15% Supports Brim
Uses the model's existing nail hole to prop the frame up. Prints in less than 10 minutes on a Core One
Model used for full play outside - Print in PET-G or ABS in full as you need resistance
A holder for the WonderWand WonderLoop portable QRP antenna. This provides support so that the antenna is not hanging off of your radio's antenna connector. There are two holder models, so you do not need to print both. They are for the…
I really wanted to put on a different bipod on my airsoft M249, but I didn't like the options available. As a result, I have created this remix! This variation of bipod rail adapter is beneficial in that it attaches to the metal bipod…
A practical storage solution for organizing multiple bipods in a compact vertical arrangement. This stand features a sloped front rail with an integrated ridge that prevents bipods from sliding off the front, while a flat wing backstop at…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 50+ Supports: No Print Orientation: Default as modeled
Long Legs for Low Hardware Bipod MK2
Deletes the small front picatinny rail on the Moose W01F. Holds the clamshell together while giving the blaster a more sleek look. I find it allows me to get more of my finger and palm on the handguard. Print as you would the rest of the…
Bipod display stand for the Zenit Photosniper camera. Held in place by a snug fit around the focus wheel + gravity, so really only useful to display the camera. Only tested on the FS-3, not sure if it will fit the FS-12 or others.
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
This adapter(convertor) is for Ruger 10/22 Target Lite to mount an CVlife adjustable 7.5–9inch rifle bipod. Since the stock on this rifle has a non-standard, flat profile, this adapter is needed. I think it should work with other bipods…
These may be too flimsy for use (Thank you Gabriel_4178917 for the feedback). I myself have not printed/tried these as they were made in response to some others critiques about the legs being to short. I would recommend printing at 5…
Front picatinny to 20mm clamping bipod adapter. After print, drill through hole with 6mm drillbit and fit apropriate hardware for re-enforcement. Rear nut groove is for a 10mm nut and other side is also 10mm (i had to drill also that side…
