Wyniki wyszukiwania: bloc

Sortowanie

6929 modeli

P
PrintablesMr. Cookie

Sock Blocker V2

The Sock Blocker V2 has a replaceable tip for adjusting the size. It is an improved version of my original Sock Blocker with better guiding rails and a tighter fit. The two versions are NOT compatible. The tip is attached by a snapping…

Pobrania
2976
Polubienia
341
Ocena
4,86
P
Printables3D Printy

Brick Block Puzzle Box

A puzzle box in the shape of a brick block. Printing All parts can be printed without supports, however Level 4 includes some long bridging that must not droop for good functionality. This project includes a version of this object with…

Pobrania
2024
Polubienia
699
Ocena
5
P
Printablesishikawats

Adjustable Ruler Positioning Block

Adjustable ruler positioning block. Highlights: Fits rulers of different sizes. Fully 3D printed, no hardware required. Just add ruler. 90° and 45° angles. Use as depth gauge, tightening nut secures measurement. Printing Tips: Model is…

Pobrania
1913
Polubienia
735
Ocena
4,76
P
PrintablesWulthan

Question Block Switch Cartridge Box

General information This is my slightly modified version of this model on a different platform. Initial credit therefore goes to the original creator. I made the SD card slots tighter and removed one to make room for more Switch…

Pobrania
1316
Polubienia
278
Ocena
4,9
P
PrintablesConky

Work Sharp Precision Adjust Knife Sharpener - Support Block

Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.

Pobrania
1179
Polubienia
110
Ocena
5
P
PrintablesDSkolnik

Scribe Block

Small scribing block with most common heights for woodworking. 9 - 12 - 15 - 18 - 19 - 22 mm Three models: 7,5 with “springs” inside for better hold pencil 7,5 - 9,5 simple straight holes STEP file included, to make you own custom block.…

Pobrania
1022
Polubienia
108
Ocena
5
P
Printablesanventia

SpaceX Starship (Block 2) (1:144 Scale)

This is a 1:144 scale model of the SpaceX's Starship upper stage! It measures 62.5mm in diameter and approx. 370mm in height! This is the “Block 2” version of the ship, featured on flights 7-9 (so far)! This ship is based on an early…

Pobrania
704
Polubienia
177
Ocena
4,33
P
PrintablesAnkhadia

Super Mario Question Block Tissue Box Covers

The question marks are set so the bed side will be showing for a nice finish.

Pobrania
341
Polubienia
83
Ocena
5
P
PrintablesDanB

Ruger 10/22 or Precision Magazine Block Empty Chamber Indicator Version 2

This is ECI mag block for a Ruger 10/22 or Ruger Precision Rifle. Keeps the bolt from closing.

Pobrania
267
Polubienia
17
Ocena
0

Scissor Block - Office Organizer for Scissors

Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…

Pobrania
250
Polubienia
107
Ocena
5
P
PrintablesAndré

Dune Imperium The Voice Blocking token

A token to block a board space when a player uses the "The Voice" card in the board game Dune: Imperium. Could be need of 2 tokens at a time. Category: Games

Pobrania
237
Polubienia
35
Ocena
4,75
P
Printablespr3mium.cola

Bosch GTS 10 XC // Adapterblock für Federkamm an Parallelanschlag

hi zusammen :), ich habe einen Adapter/Aufnahme für einen wie ich finde sehr coolen vorhanden Federkamm entwickelt um diesen unverändert an dem Parallelanschlag (horizontale Anwendung) der GTS 10 XC verwenden zu können. Anwendungsidee:…

Pobrania
216
Polubienia
25
Ocena
0
P
PrintablesSkovik

PrusaSnake - Letter Blocks - Play & Learn

Letter blocks - Play & Learn. Písmenková stavebnice, hračka i učební pomůcka. Print instructions English text bellow ... PrusaSnake - Letters Kit (písmenková stavebnice) Je hračkou, učební i protistresovou pomůckou ve formě skládání…

Pobrania
201
Polubienia
66
Ocena
5
P
Printablesjrsone

FlySky Noble NB4 "Lock Blocks"

The Noble NB4/NB4+ remote is really great, and the movable steering wheel ‘arm’ is nice to allow left and righ-handed driving, as well as going ‘flat’ for easier transport. The only negative I've found is that the wheel arm tends to move…

Pobrania
200
Polubienia
18
Ocena
5
P
PrintablesPjotrStrog

Stand for acrylic photo/woodblock print frame

My first design. It's a simple stand for an acrylic photo frame that can be bought on aliexpress. It is designed for the 254x203mm that is 19.4mm thick. It's best printed on its side. Link to product.…

Pobrania
180
Polubienia
21
Ocena
5
P
Printablessquinn

Interlocking Connect Blocks

I have fond memories of playing with connectable shapes that looked similar to these as a child, and so I decided to try to make a version that could be 3D printed. My goal was to create something that was easy to attach and pull apart in…

Pobrania
170
Polubienia
85
Ocena
5
P
PrintablesExtra Fox

Grado Headphones Rod Blocks

This is one of those things that if you need them, you'll know. Otherwise you probably won't give them a second thought. If you need them, you've either had one break or you learned that if you want to customize your headphones, you're…

Pobrania
166
Polubienia
31
Ocena
5

1 2 3 block / 123 block / 1-2-3 block holder

1 2 3 block holder. The tool holder module couples with the attachment plate module, print one of each and you have what you need to hang a 1 2 3 block. 1 2 3 block size 2-15/16 x 1-15/16 x 63/64" (75x50x25mm). MODULA - a module based…

Pobrania
162
Polubienia
7
Ocena
0
P
Printablescrashkg

Height Gauge and Setup Block (Metric and Imperial)

You can use the height gauge to measure and keep track of your settings on any piece of equipment in your shop. Use the ruler in the center of the gauge to lock in a measurement and then setup all your equipment to match the height or…

Pobrania
162
Polubienia
33
Ocena
5
P
PrintablesKamil

Zero Deflection Stop Block for T-Track Fences

This is a parametric/customizable stop block for t-track fences. The presets are for Kreg Trak, which accepts ¼" bolts and is 2-5/8" (66mm) tall and 1-3/8" (35mm) wide. The knobs are sized with very tight tolerances so that the nuts can…

Pobrania
139
Polubienia
53
Ocena
0
P
PrintablesGuinuf

Cat Door Blocker

I Designed this model inspired by https://www.pngegg.com/fr/png-yngwn . There are different models depending on the height of your door. (3.2 to 7.4mm) (4 to 9.4mm) ( 4.8 to 11mm) I printed it flat in PLA with 3 perimeters, 10% filling in…

Pobrania
136
Polubienia
21
Ocena
5
P
PrintablesAdudino

Lego - Like Dinosaur Building Blocks / Bricks, Kit 2. Geometry Print- and Build-Optimized and Tested.

I want to introduce you to a dinosaur brick set, see also my Building Blocks System . Model Info | Introduction I created a brick system (see here ) adapted from (analogue to) Lego and optimized the dimensions for easy printing with PLA…

Pobrania
134
Polubienia
31
Ocena
0
P
PrintablesAinon3Dtisk

Block, Brick, LEGO Flowerpot, Vase

Hello, Welcome to my profile, full of models and miniatures :-) I have Block, Brick, LEGO Flowerpot, Vase for you. It prints really well. You need to use supports! If you are interested in my work, the links are here:…

Pobrania
132
Polubienia
36
Ocena
0
P
PrintablesPrinter Go Brrr

Knurled Blockmit Stackbox

A knurled, screwable Stackbox for a Blockmit style seed phrase backup for M8 stainless steel washers with 24 mm outer diameter). The box can hold up to 25 washers. Print with 0.15 mm layer height or lower, and at least 4 perimeters for a…

Pobrania
132
Polubienia
14
Ocena
0
P
PrintablesÉtienne

Stacking number blocks children's math toy

An educational toy for children that helps them visualize simple additions. It has 10 different blocks from 1 to 10, each one with its number on it and a matching height in centimeters. The blocks are 4cm wide and 3cm deep. They stack…

Pobrania
115
Polubienia
39
Ocena
5
P
Printables4FingerEddy

Hape Quadrilla unique Block

My boy got a marbel run that that consists of individual parts. This way you can build your own runs, in our case with soundeffects as well. But one of the track from the manual showed a little flaw in the designe. One of the Parts, where…

Pobrania
106
Polubienia
10
Ocena
5
P
PrintablesGlennon Studio

Storage Box for Lego or Lego Like Blocks

Needed a way to store a extra parts Lego Kit. A place for parts and the manuals. Also it makes for a nick way to display the models put together. printed at 0.2 layer height using Silk PLA on a Prusa MK4s with MMU3

Pobrania
73
Polubienia
14
Ocena
5
P
PrintablesKen Levasseur

Block Island Ferry

This model was created from a single photo taken of the Block Island ferry this summer, using Rodin ( https://hyperhuman.deemos.com/rodin). The ferry runs from the fishing village of Galilee in Narragansett, Rhode Island to Block Island.

Pobrania
72
Polubienia
8
Ocena
0
P
PrintablesLeon.Reijnders

Sanding Block 90 Degree with Tensioner (OnShape)

This Sanding Block is useful for sanding inner Corners (example Picture Frames). The Lower screw will fix the sanding paper, the upper Screw will tension the Sanding paper. Cut your Sanding Paper into 50mm x 170mm stripes. Printed in PLA…

Pobrania
70
Polubienia
5
Ocena
0
P
PrintablesLockwatcher

Stargate Rings Puzzle - Blocked!

Stargate Rings Puzzle - Blocked! I designed a Stargate Ring Platform for use in a game I am working on. After scaling the platform up, I realized this would make an interesting puzzle. This is the result of that effort. Puzzle concists of…

Pobrania
70
Polubienia
21
Ocena
0
P
PrintablesGilles

Roller shutter crank blocker - Bloqueur de manivelle de volet roulant

[Fr] Il s'agit d'un bloqueur de manivelle de volet roulant, de section cylindrique ou polygonale de diamètre 16 mm, à coller avec du scotch double face sur la paroi. Je l'ai conçu pour remplacer mes bloqueurs cassés. [En] It is a roller…

Pobrania
66
Polubienia
1
Ocena
0
P
PrintablesRobert Schiele

Wheel blocker for IKEA RIGGA

When putting the IKEA RIGGA clothes rack outside for drying the clothes the wind can easily push the whole rack around due to the attached wheels that don't have any break functionality. As such I designed those simple wheel blocks to…

Pobrania
64
Polubienia
16
Ocena
5
P
PrintablesClord Print

Custom 123 block 25mm/50mm/75mm

While clearly not made for machining these blocks are great for those times where you have a need to missuse your 123 blocks. I've breifly used them as spacers and for reference but already they're becoming some of my most favourite…

Pobrania
62
Polubienia
3
Ocena
0
P
PrintablesAWSW

Logitech C920 webcam blocker

Super simple to print and use Logitech C920 (HD PRO) webcam blocker that will sit on top of your camera and will block the camera for your privacy. =) Just print the part laying on the logo and you will not need any support or brim.…

Pobrania
61
Polubienia
10
Ocena
4
P
PrintablesAinon3Dtisk

Playful for children Balancing block stacking

Hello, Today I have Balance Block Stacking for Kids for you . The game can be played in several ways: - Play until someone drops one or more cubes - Play until the base turns over and all the cubes fall - Just stack until the cubes run…

Pobrania
60
Polubienia
20
Ocena
0
P
PrintablesSteveW91

Paper Shredder Unblocking Comb

Helps push bits of stuck paper through a shredder - scale it to fit your shredder!

Pobrania
53
Polubienia
10
Ocena
0
P

Core One ventilation blocker OPEN state

Prevents ventilation to close during printing or by accident. use PETG 0.2mm layer

Pobrania
50
Polubienia
9
Ocena
5
P
PrintablesOBConcepts

Zero motorcycles rear fender hole blocker

Whenever I was riding on the zero motorcycle and there was mud on the road, I would find myself having to clean the rear braking light constantly. When you have the brake light covered in mud, it is really dangerous as other drivers wont…

Pobrania
47
Polubienia
10
Ocena
5
P
PrintablesJoergH

Black&Decker Workmate WM550 - 4 Loch Halter für Spannbacken Bench Block Holder

Black & Decker Workmate WM550 Type 9 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black

Pobrania
47
Polubienia
10
Ocena
0
P
PrintablesBoBaCool

MFT eccentric locking system - MFT système excentrique de blocage

Improved eccentric blocking system for MFT type workbench with 20mm holes. Printed in PETG, not to be used for hard work ! Details in 3mf file. Système de blocage excentrique amélioré pour établis type MFT 20mm. Imprimé en PETG, non…

Pobrania
44
Polubienia
11
Ocena
0
P
PrintablesDave D

Keltec PF9 Trigger Block

I have a Keltec PF9. It has a belt clip. I have found this to be handy. I like the minimalist belt clip for IWB carry. I DON'T like carrying without the trigger covered. So I carried with the chamber empty. I didn't like carrying with the…

Pobrania
43
Polubienia
8
Ocena
0
P
PrintablesThe Alchemist

123 block stands

123 block stands vertical and horizontal I found my blocks to be a little off in measurements so the tolerance of the stands might be different if you have higher quality 123 blocks. horizontal stand internal measurement length 78.2mm…

Pobrania
43
Polubienia
6
Ocena
0
P
Printablesmark-bz

Knife block extension for 20cm kitchen knife

The cap is printed with honeycomb infill and no top / bottom layer. For assembly you need 2x M5 countersunk screws 2x M3x6 2x M3x8 4x M3 nut

Pobrania
39
Polubienia
12
Ocena
5
P
PrintablesKamil

Customizable Katz-Moses Stop Block Spacer

This is a parametric spacer for the Katz-Moses stop block. My track (Kreg Heavy Duty Trak) is 2.675" tall, leaving a gap slightly under ½" between the bottom edge of the stop block and my table. Pieces around ½" or slimmer don't have a…

Pobrania
35
Polubienia
11
Ocena
0
P
PrintablesPeopleware

Blockpuzzle / Puzzle game block puzzle

Knobelspiel Block puzzle: Bringt alle Blöcke in der Box unter, aber natürlich nur durch die Deckelöffnung. Der Druck ist einfach, ich habe PETG verwendet, aber PLA ist mindestens ebenso geeignet Block puzzle cover.3mf: Deckel Block puzzle…

Pobrania
33
Polubienia
5
Ocena
0
P
Printablesgfellows

Blocky Heart V2

Same as my previous model (https://www.printables.com/model/66378-blocky-heart), but I added a new variable, half , to the OpenSCAD code. Setting this variable to true only renders half the model, allowing you to easily print the model in…

Pobrania
33
Polubienia
10
Ocena
5
P
PrintablesAdri Brow

Bloque de Mario - Mario Block

Maceta/bote inspirado en el bloque de interrogación de Mario bros, con un tamaño de 5vmx5cm, no se porque no me deja orientarlo como debe, pero a la hora de imprimir si no se hace con codigo g, deben girar el cubo. Flowerpot/pot inspired…

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesJoergH

Black&Decker Workmate WM825 - Stanley Deluxe - 4 Loch Halter für Spannbacken Bench Block Holder

Black&Decker Workmate WM825 - Stanley Deluxe 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesMatteo1996

HoneyGuaridan A68 Container Cap Block

Replacement part for food dispenser HoneyGuaridan A28 (Code model: HG-A28D), Print only in PET/PETG for flexibility.

Pobrania
24
Polubienia
3
Ocena
5
P
Printablesaith53

Ice block mount for standing / pedestal fan ventilador de pie soporte bloque hielo

Ice block mount for standing pedestal fan with rhomboid grid or similar. Printed with PLA+, without supports, 235º nozzle, 65º bed, 200mm/s speed. Ice block measures: width 80mm, length 151mm, thickness 26mm. Notes: Tighten the nut…

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesNissan

Blocky Open Sign

This is a Minecraft inspired open sign for decoration and accessories.

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesPC_Builds

Blocky Heart Pencil Holder

Pencil holder with blocky sides in the profile of a heart.

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesBenni

LED Blocker Koorui 3,8 mm x 2,5 mm

I designed this to block the white led that indicates sleep on the Koorui Monitors. I find this uncomftorble to sleep. These just slot over the existing light. Print in very fine resolution (0,1). The model is very fast, so you are done…

Pobrania
20
Polubienia
1
Ocena
0
P
Printableshangbar3d

Terraplanter Block

I have added the the setting I used to make it water tight. look at the video to see the assembled version instructions. be sure to not fill to much water otherwise it would drip.

Pobrania
18
Polubienia
6
Ocena
0
P
PrintablesJoergH

Black&Decker Workmate WM550 - 1 Loch Halter für Spannbacken Bench Block Holder

Black & Decker Workmate WM550 Type 9 1 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesNicoautoxp

Alligator Slicer Blade Block Clip

Hi, We have a an Alligator Slicer to slice our vegetables, however after long term use the clips holding the blade block in place have broken off. So there clips are a replacement for the orignal clips.

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesDefozo

Roborock Blockage for Songmics Standing Desk

This model is a specially designed blockage for the Songmics Standing Desk, created to prevent Roborock vacuum cleaners from becoming stuck underneath it. The design ensures easy installation and removal, making it a convenient addition…

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesMichael K

"Hobelheld" Messerblock für Küchenhobel

Der “Hobelheld” – Dein 3D-gedruckter Messerblock für Küchenhobel Ein Meisterwerk der Steinkunst (nicht wirklich, aber fast!) Überblick: Der “Hobelheld” ist der ultimative Aufbewahrungsblock für deinen geliebten Küchenhobel und seine drei…

Pobrania
10
Polubienia
3
Ocena
0
P
PrintablesGizmo Goody

Parametric Gridficiency (and Gridfinity) Thermoworks RFX Wireless Probe Charging Block Dock

Motivation I purchased a Thermoworks RFX Wireless Probe Starter Kit and wanted a dock to efficiently store and transport the probes in their charging blocks between the kitchen and my grill. Solution Design a custom Gridficiency-based…

Pobrania
9
Polubienia
0
Ocena
0
P
Printableslordzogar

Calibrix Antistud Calibration Tool for Toy Blocks

This model is a companion to my other Danish blocks calibration tool. Whereas my other calibration tool was created to help you find the perfect radius (in mm) for the studs on your 3D printed Danish blocks (based on your printer's…

Pobrania
7
Polubienia
1
Ocena
0
P
Printableslordzogar

Doplo Danish Blocks Arrow Heart Star and Blank Tiles

Warning: Possible Choking Hazard. With models like this, there should always be caution before giving this to a small child. A small piece like this could be a choking hazard to someone who isn't old enough for this toy. Why did I design…

Pobrania
6
Polubienia
0
Ocena
0
P
Printablesrobo.node

Rugged Heater Bloc - Parametric

This 3D printed base uses less material than other options, and is more rigid, and less likely to have its rings/collars sheer loose from the base. I highly recommend using the 3mf file I included in order to get the correct print…

Pobrania
5
Polubienia
0
Ocena
0
P
Printableswerz 99

Mounting Block

Distance Block for mounting a hall sensor of a Rcexl CDI Ignition A02 system to a modelengine.

Pobrania
3
Polubienia
0
Ocena
0
P
Printableslordzogar

Doplo Danish Blocks Tightness Calibration Tool

Calibrate your 3D printed Doplo Blocks Get the perfect fit each time You have an idea for a 3D printed Doplo Block. You little at home is going to love it. You print it. It's too tight. Or it's too loose. You increment your tolerances,…

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesF33.studio

Soil block maker for seeds

Spring is just around the corner. It’s the perfect time to start your seeds, so when the sun finally shows its strength, your garden is already one step ahead. Dimensions & Capacity: Compact size of 114 × 58 mm with a height of 30 mm .…

Polubienia
15
Ocena
0
P
PrintablesPointNemo

Sanding Block 93x115, 115x140

Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…

Pobrania
30 301
Polubienia
12 817
Ocena
4,9
P
PrintablesUtku

Blocky Benchy

Blocky Benchy is a fun and unique twist on the popular Benchy model! With its blocky, pixelated design, this model is perfect for those who love a retro aesthetic. It's also a great way to test your printer's accuracy and performance in a…

Pobrania
12 837
Polubienia
2209
Ocena
4,95
P
PrintablesPrusa Research

Engine Block V6

This is a model of the engine block made for the Original Prusa XL Five-Head.

Pobrania
10 927
Polubienia
2997
Ocena
4,94
P
PrintablesBasementLAB

Snap-fit ball joint with locking nut - Giunto Sferico ad incastro con ghiera di blocco

Snap-fit ball joint with locking nut - Giunto Sferico ad incastro con ghiera di blocco Compact, reliable, and easy to assemble. The T-SSIC features a snap-fit spherical joint secured by a threaded locking collar (clamping ring). Ideal for…

Pobrania
10 889
Polubienia
5277
Ocena
4,57
P
PrintablesMooseBoys

Prusa CORE One Snap-in Corner Block

Snap-in corner covers for Prusa CORE One printer. Depending on your door orientation, print one of either the “standard” or “swapped” covers. Use this for the corner with the door handle. Print three of the “original” covers and use these…

Pobrania
10 183
Polubienia
425
Ocena
4,92
P
PrintablesPrismaPrints

Simple Sanding Block / Sanding Tool

This is a three part sanding block, made to be very easy to put together. Scale as you like, but be wary when scaling down, the bolt may need more clearance. At 100% scale needs about 19cm of sandpaper. Recommended settings (best to use…

Pobrania
9579
Polubienia
2006
Ocena
4,93
P
PrintablesJan Štech

Sanding Block

To assemble, you will need an M6 screw at least 25mm long with a hexagonal head and an M6 nut. It is also possible to attach a thin strip of foam to the sanding blocks, but it is not necessary. See also: 18mm Utility Knife…

Pobrania
9481
Polubienia
4288
Ocena
4,89
P
PrintablesStormWatcher

Articulated dinosaur skeleton 2. Triceratops. Styracosaurus. Xenocerotops. Diablocerotops. No supports. Flexi.

An articulated dinosaur skeleton with a removable skull. Triceratops, Styracosaurus Xenocerotops and Diablocerotops skulls included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height.

Pobrania
9302
Polubienia
1868
Ocena
4,9

V-8 Engine Block

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop I chose to go with organic supports

Pobrania
9213
Polubienia
1677
Ocena
4,93
P
PrintablesStenly_G

Engine block V8 keychain

This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have an idea for…

Pobrania
8871
Polubienia
1459
Ocena
5
P
PrintablesBest_codes

Building Bricks / Blocks

Collection of LEGO® bricks. The 3D models are not official by LEGO®, and I am in no way LEGO® official.

Pobrania
8174
Polubienia
2607
Ocena
4,4
P
PrintablesCalebTimoteo

Super Mario Bros Pot Plants - Pipe, Brick Block & Question Block

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)

Pobrania
7950
Polubienia
3218
Ocena
4,89
P
PrintablesPrintuin

Super Mario Question Block for Nintendo Switch

I know that there are already similar models on thingiverse and PrusaPrinters , however, I wanted to have one where only games go in. That's why I made a completely new design by myself. The cube is slightly larger and you can directly…

Pobrania
7797
Polubienia
2350
Ocena
4,79
P
Printablespogofcz

Gridfinity block template - Easy to use! (For Fusion 360)

Edit 8/3/2024: Added template without magnet holes. They are still in the sketch but they are not extruded. This easy to use template lets you make your own blank Gridfinity blocks. Sugested workflow: Open the template file. In the Modify…

Pobrania
6511
Polubienia
442
Ocena
4,96
P
PrintablesGabor Gyarmati

V8 Engine Block Name Card and Pen Holder

A V8 engine block with a top part suitable for holding your business/name card. Test prints were made on a Prusa i3 MK3S and an Anycubic Kobra 2 from PLA with 0.2 mm layer height, 5 % infill density, 190 °C nozzle temperature and 65 °C…

Pobrania
5669
Polubienia
929
Ocena
5
P
PrintablesBalazs

Metric thread testblock

A thread test block for normal Metric threads. You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. The v2 version uses a thicker marking to be more printable.

Pobrania
5572
Polubienia
1254
Ocena
4,75
P
Printablesskroob

Sanding Block (Updated! and a new Version in 11 inch)

Deutsch: Das ist ein Schleifpapier-Block passend zu den Schleifpapier-Rollen mit einer Breite 25 mm (1 Zoll) oder auch zum selber zuschneiden dafür etwas breiter in 300 x 40 mm. Für den leichten Zusammenbau benötigt man nur noch eine…

Pobrania
5502
Polubienia
2026
Ocena
4,84
P
PrintablesExtrutim

Blocky Planter #3 Flower Pot Collection

This is the third of three small flower pots I made for my plants. Print it with enough wall lines and top layers to get it waterproof . The pot has an inner diameter of 60mm and has the same depth. Furthermore, I added a solid version to…

Pobrania
5254
Polubienia
1175
Ocena
4,97
P
PrintablesMicke

Simple Sanding Block

Sanding block with simple construction. Made to work with a 38mm x 230mm - 240mm sandpaper stripe. After trying out a few sanding blocks, not finding anything fitting my needs. Either they were over-complicated, screws were fiddly, the…

Pobrania
5178
Polubienia
844
Ocena
4,95
P
PrintablesEpuKota

Prusa CORE One Block the corner

Attach to the corner of "CORE One"

Pobrania
4876
Polubienia
1169
Ocena
4,92
P
PrintablesRewster

Julius Caesar Knife Block

Update, 3/27/2025: If you want to print this model exactly, I dug up my old amazon orders for the chef's knives and bread knife . I bought the 6 steak knives on the left side offline, and the kitchen shears hole should probably fit most…

Pobrania
4844
Polubienia
1562
Ocena
5
P
PrintablesPavel Rampas

Sanding Block (parametric)

Other parts: M3x20 bolt (2x) or you can change parameters M3n nut (4x) or you can change parameters Parameters: width lengthUp lengthDown height boltD boltHead boltHeadD nutHeight nutWidth

Pobrania
4625
Polubienia
1242
Ocena
4,79
P

Print In Place Mario Coin Block Container

Here's a nostalgic container for the gamer in us all! I designed this model to print in place, and it needs no supports. Updated 8/31/23: I added a catch on the tail of the question mark to keep the block closed. Check out my Game Holder…

Pobrania
4625
Polubienia
1094
Ocena
4,9
P
Printablesapembo

Caulking Gun Nozzle Unblocker

Used to pull set / hardened caulk from a used nozzle. Simply remove the nozzle from the tube, wind the unblocker tool in and pull out the old caulk. Used to restart a tube with nozzle that hasn't been used in some time. Printed with 0.2mm…

Pobrania
4446
Polubienia
1438
Ocena
4,98
P
PrintablesIBNobody

MK4 Nextruder Nozzle Change Heater Block Clamp

Background As many of you have found, it is easier to swap MK4 Nextruder nozzles in-place rather than to disconnect and swap out the entire heater block. Problem In-Place Nozzle Swaps pose some amount of risk in that you have to hold onto…

Pobrania
4237
Polubienia
1027
Ocena
4,98
P
PrintablesFila_Ex

Mini Sanding Blocks

3D-Printed Mini Sanding Blocks – Your Perfect Partner for Precision Work Sometimes, it’s the smallest details that present the biggest challenges. Tiny corners, narrow edges, or curved shapes can be tough to refine with large tools.…

Pobrania
4067
Polubienia
2054
Ocena
4,97

PrintABlok Modular Building Block Base Bloks

PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block…

Pobrania
3972
Polubienia
1088
Ocena
4,88
P
Printables6d6178

Wago 221 Power Distribution Block

This is a power distribution block that uses Wago 221 connectors . It comes with many different mounting options and a base model is available in STEP and STL to easily remix and make your own mounts. You can use it for whenever you need…

Pobrania
3860
Polubienia
1641
Ocena
5
P

Game Holder Insert for Mario Coin Block (Nintendo Switch compatible)

Here's an insert for my Print In Place Mario Coin Block that holds 16 Nintendo Switch game cartridges. Are you interested in selling your prints of my designs? Join my Printables Club , and start making 💰 with your idle printers!

Pobrania
3816
Polubienia
891
Ocena
4,96
P
PrintablesGijs

Sliding Door Lock / Latch with optional Filler Block

Print as the attached .3mf files (for 0.6mm nozzle) to get the best strength for the parts. The filler block should be adjusted to match your door, and can be left away of course if there is no height difference. In my case the height was…

Pobrania
3780
Polubienia
671
Ocena
4,97

SLS Block 1 (Artemis)

Support Me Support my work by subscribing to my Printable club to have access to the multi-color version of the SLS Updates 17/02/2024 Stand redesigned with two versions, AMS/MMU and Multi parts. Description The " Space Launch System "…

Pobrania
3776
Polubienia
1397
Ocena
4,99
P
PrintablesMasibu

Gridfinity LITE Ultra Blocks & Template

Background The standard gridfinity designs are great for tools and heavier objects however they are overkill for small part bins. Current approach to light weight the designs are currently limited, eg. Vase Mode limited to single 1x1…

Pobrania
3682
Polubienia
812
Ocena
4,62
P
PrintablesNir Dobovizki

Caulking Gun Nozzle Unblocker - without support

Caulking Gun Nozzle Unblocker - without support

Pobrania
3667
Polubienia
1190
Ocena
4,98
P
PrintablesD

Question Mark Block Tissue Box Cover

Tissue Box Cover in the Style of Mario Question Mark Block. This is designed to go over a store bought tissue box so there's no bottom. Files include a split question mark for easier printing. Print the Box and Question Marks separately…

Pobrania
3654
Polubienia
2173
Ocena
5
P
PrintablesExtrutim

Blocky Planter #2 Flower Pot Collection

This is the second of three small flower pots I made for my plants. Print it with enough wall lines and top layers to get it waterproof . The pot has an inner diameter of 60mm and has the same depth. Furthermore, I added a solid version…

Pobrania
3634
Polubienia
772
Ocena
4,96