Liczymy pasujące modele…
Couldn't find any mounting brackets for the Brennenstuhl Primera-Line 10 socket powerstrip so I made a really simple one in fusion. Works better than I expected and holds really well to the underside of my desk.
Supporto per un Hub Usb Sabrent da 10 porte. Stampare con supporti.
After printing, bend the inner part out slightly so that it can snap into place later. Printing in PETG 15% Infill 0.20mm Quality
Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Creality PLA
I used a Layer hight of 0.3mm and variable layer height to smoothe the curves.
The part is fixed to the desk using 2 screws (behind), the charger slides in and a tab with a stop secures it in place. The part can be printed in PLA with just a few supports.
This is a very simple friction fit stand, to hold the hub upright on its side. I made it so my plugged in usb wireless dongles would be in an optimal position while I could still switch them on and off individually.
This model allows mounting a Brennenstuhl Alu-Office-Line Power Strip 6-fold (1391040600) on the side of an IKEA Bror shelving unit with 40cm depth (e.g. 094.717.41 ). Required for assembly are two M5x9.5 heat set inserts (M5x5.8 probably…
Motivation I wanted to design a flexible holder for Brennenstuhl power strips of various types (n-way). It should work with any housing from the Brennenstuhl Premium-Line (single row). Easy mounting and unmounting should be possible,…
Motivation I wanted to design a flexible holder for Brennenstuhl power strips of various types (n-way). It should work with any housing from the Brennenstuhl Premium-Line (single row). Easy mounting and unmounting should be possible,…
for all possible fixtures on GoPro mounts.
This is the model used to make the torpedo in this video: [video link]. It's very much a prototype - the final model had quite a few post-print modifications made to it. If I get time, I'll detail those modifications (that could probably…
A mounting bracket i have designed for this Brennenstuhl Powerstrip. I used 4x15mm countersunk wood screw to mount it to the underside of my desk. Print settings Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: Das Filament…
Mount for Brennenstuhl powerstrips
Be aware that some models differs from the one I bought, especially the size of the cable attachement. Check that before printing pls.
Ich habe einen Halter für den CEE Stecker meiner Brennenstul Kabeltrommel gesucht und den von Thingiverse “crix26” für sehr gut befunden. Leider habe ich einen anderen Stecker an die Kabeltrommel verbaut und somit passt der Halter nicht…
A pair of these brackets lets you fix the Brennenstuhl EcoLine 6x extension cable to the underside of your desk. Make sure to push up against the extension cable when removing the plugs. Print with PETG, PLA or other filament.
Die Halterung des Winkelsteckers nervt einfach. Ich habe dann das Modell von https://www.printables.com/@edmanderl_108910 gefunden und für mich nachgebaut. Das Kabel muss man links herum aufwickeln, dann passt es mit der Halterung ganz…
Drawn and printed an mount for my Brennstuhl Premium-Line a long time ago. The mounts I found online were not tight enough or the nose not stable. Mounted under my desk - fitting perfectly and very tight. Printed in PETG for flexibility…
Made hooks wider and deeper for better retention. MOved mounting tabs inboard and resized mounting holes for M3 screws. Installed with 4040 M3 T-Nut by Olafelch - https://www.printables.com/model/217606-4040-m3-t-nut. Printed with organic…
In order to attach this multiple socket outlet securely on a wall I created this holder. You need two for the unit.In order to attach this multiple socket outlet securely on a wall I created this holder. You need two for the unit. After…
This is a simple mount for Brennenstuhl Premium-Alu-Line Extension Sockets. It's designed for 4 mm screws and tight-fit. Use two of them per extension socket. Position them using the aluminium profile, slide it in and finally reassemble…
https://www.brennenstuhl.com/de-DE/produkte/steckdosenleisten/steckdosenleiste-einzeln-schaltbar-6-fach-2m-h05vv-f-3g1-5
Mounting bracket for Sabrent 10 port USB hub. Mounts with a screw at each end. This is not and was not intended to be rigid enough for you to yank cables out of the hub, just sufficient to hold it vertically on my sim rig. Printed in…
This is my uncompleted project of gas blowback CZ Bren 2. If you 3d print all the parts, you get mostly reliable gun. Reason why I didn't complete tweaking of the dimensions is because I lost all motivation. So I made it free so someone…
Various word art names. Prints well at 0.2 on Mk3S+ and Mini+. Print face down on smooth PEI sheet for best results. Credit to Robert Halter.
I made this model for my Sabrent. The goal being to manage and protect all my cables easily with a clean finish. It is made for the inner right side of your aluminium profile rig. If you need it for the left side, mirroring along Y axis…
This is a remix of Kryp's 2.5 Inch hard drive enclosure designed to work with this Sabrent SATA to USB 3.0 adapter . Category: Computer
I needed a holder for my tig torch to safe storage between welding projects. As I have no welding machine cart yet, I made this wall mount torch holder and want to share it with you. The holder secures the WP26-F torch safely, regardless…
Stabilere Halterung für Brennenstuhl Premium-Line Steckdosenleisten
This model was designed for ASG Bren 805. The measurements for this model were taken from an actual, working unit. Parts For parts print the following: 1 x Hopup unit.stl
Custom made, tight-fit, wrap-mount for your Brennenstuhl Eco Line Extension socket. Mount it under a desk or cabinet, or on a wall. Slides along the extension socket rail and snaps in place with little bumps wrapping the sockets. Use any…
A mount for a 10-port USB hub. Rember to print with supports enabled. Organic tree supports worked well for me.
This mount is designed to grip the Sabrent 4-port switched USB3.0 hub available from Amazon . https://www.amazon.com/Sabrent-4-Port-Individual-Switches-HB-UM43/dp/B00JX1ZS5O The hub snaps into place with two fins paired on the left and…
Enables you to mount the hub onto a wall/table etc. I designed this in Tinkercad, here is the link to the design if you want to make any changes: https://www.tinkercad.com/things/0ayiMZ6S4O0-sabrent-usb-hub-holder
A protective case for the sabrent m.2 ssd case with a compartment to hold the cable. Needs 2 6*3mm magnets for the lid. If you have any further questions or need a special file format to adjust the case to your likings feel free to dm me!…
I ordered a Brennenstuhl 8 port powerswitch off Amazon. It's supposed to go under my desk, but had no way of mounting it, since the package came with only one adapter plate (white in the photo). Printed in PETG with 3 walls and 30%…
Optional mit kleinem Haken für längere Kabel oder ähnliches
Halterung für Brennenstuhl Secure-Tec Steckdosenleiste Category: Household
Schild für euer Brennholzlager Ist in 210mm Breite erstellt, kann aber größer skaliert werden (dann evtl. Höhe anpassen)
Now you can have your very own Brendan S.C.S.M, complete with decals! The standard size Brendan comes in at is about 1:16-1:15 in scale, meaning your 4-5" figures are perfect for displaying along side him. If you are printing this Brendan…
I purchased a Sabrent USB hub from Amazon and wanted my USB ports easily accessible. This uses 4 small screws to hold it to a desk or anywhere you don't mind drilling a few holes. I designed it with a cutout on the bottom to access the…
Currently - July 24 - the “Brennenstuhl Eco-Line 10-Way Power Strip” is the cheapest 10-socket power strip on amazon. Unfortunately, it has no integrated mounting options. Thats why I created this - a compact set of of mounting brackets.…
I remixed this for my simrig. Its slightly bigger than the original version for better tolerances. I added a 9mm hole at the end for M8 screws. Like the original version you have to unscrew the end cap and slide the holders in and screw…
I've made the hole for the cable bigger and added one on the other side for the "Comfort Switch Plus" model
Brenda doesn’t tell you jokes. She just does the job. —————————————————————————— All my designs are protected by copyright laws. Upon downloading you agree to use the files for personal purposes only. This means you do NOT have the right…
90210 - Brenda Walsh (Shannen Doherty) - 1990-2000 3D printable model.
Mountingbrackets for mounting Sabrent 4-Port USB-Hubs to aluminiumprofiles (Simrig etc.) Also he power supply can be used. Hole is for M8-screws.
3D Printed Mount for Brennenstuhl Power Strips : This mount is designed to securely attach Brennenstuhl power strips to flat surfaces, such as walls or desks. It's a practical solution to keep power strips organized and out of the way,…
Recently bought a Brennenstuhl Power Plug Extender for my office and encountered the fact, there's only 1 fixing bracket for wall mounting. Sh... So I designed one in Fusion360 here's a link to the extender:…
I made these dies to use with the Brent Clay Extruder or any 4" inch diameter clay extruder. These are used to make hollow extrusions in various shapes for handbuilding clay sculpture or functional ceramic wares. I printed these with…
Sabrent HB-BUP7 Mount Used to hold USB hub to 40mm aluminum extrusion using two M8 socket head cap screws.
printed with Ankermake M5 in normal Mode, 30% infill
Includes .f3d and .step files so you can modify if Sabrent shipped a different power supply for your hub--see photos for the specific power supply that came with my USB hub, and fits in this holder. Holes are sized for #6 screws. Also…
After ripping all of my Doctor Who DVDs to an external hard drive (for faster, easier access), I thought it'd only be appropriate if the hard drive was in a Doctor Who TARDIS enclosure. I designed this to be used specifically with a…
Simple model to mount the Extension cords/Sockets by brennenstuhl solidly wherever you want. Uses two screws per side. Needs supports to print, I suggest printing in the orientation of the .3mf for best strength.
Its a simple remix for the bigger brennenstuhl socket mount
The original file was perfect but the sides of my desk were obstructed by the metal frame so i couldn't slide my extension socket in. Added screw holes (M4 countersink like the original ) to the sides of the model and problem solved!…
The Bees! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. This was a difficult one but the result is…
Super simple bracket to get power strips from Brennestuhl (sold all around the EU) easily mounted to walls. Uses the existing, albeit shitty mounting system. Height adjustable when mounted to get it perfectly level. Works best with 5x30…
I made a power strip holder for a Brennenstuhl adapter. The shape of this brand is different to the usual and an ordinary mount didn't fit. So I made my own! Best when printed when outside faces are on buildplate. Requires four screws to…
Customized holder for Spax-Screws on inner side
Brennenstuhl power strip customizable brackets This design is for the Brennenstuhl 6-way Euro power strip with individually switchable sockets.…
Ich habe mir erlaubt das Coole Schild in der Bambu Labs Edition zu gestalten. Hier ist die Schrift nicht erhaben sondern eingelassen, mit der AMS lässt sich das schön smoooth drucken wenn das ganze mit der Schrift nach unten auf dem…
Bonjour, Voici le bouclier de Brennus sur son socle de ma conception. Réaliser sous F3D à partir d'image du fameux Bouclier de Brennus de rugby. La plaquette est vierge en STL, mais j'ai mis à disposition en .STEP pour que vous puissiez…
This is a vertical desk stand for the Sabrent 252W USB PD charger (model AX-8PTC), a product recently popularized by Jeff Geerling and others for its great feature set. The charger has a IEC60320 C8 socket at the bottom. The stand is…
A model to mount a Brennenstuhl premium-line power Strip to an IKEA Skadis Board. I'll use the closed mount at the sides and the open one the middle. To insert the power strip you need to remove the end cap an put it back on afterwards.…
Modified versions for mounting the Brennenstuhl ST BM 0619 Secure-Tec power strip under a tabletop.flush with the outside of the tabletop. Only works for Secure-Tec power strips, not for Eco Line. Category: Organization
good friend of me asked me to create a simple tag which can be attached to his fuel canisters and tanks to prevent mix them up and putting wrong fuel into his historical cars. Very simple design. Fusion 360 file attached
There are a couple of bridges in this design I couldn't think of an easy way to avoid. I've printed the model twice and both time the bridges came out well enough without any special tweaking with plain PLA, and I'm definitely not a…
Alternative mounting for brennenstuhl strip when original hole not fit.
Print without supports. Use M2.5 screws, self tapping.
Mandalorian Helmet - Pieces fit Ender 3 by brendilon79
Under table mount for portable drive, specifically for a Sabrent enclosure. One end is open to allow for drive removal without removing the mount. =LJ= Print instructions Category: Computer Print Settings Printer Brand: Creality Printer:…
Halterung Brennenstuhl Premium-Line Steckdosenleiste Für die Montage werden gesamt 4Stk. M4 Gewindeeinsätze sowie Schrauben M4x6 benötigt.
Fits Eco-Line model. Printed in PLA with 3 perimeters.
As requested, this is an upload of jigs I designed for making springs for my 3D printed Bren 3 GBBR. link to the airsoft gun: https://cults3d.com/en/3d-model/various/bren-3-mws-gbbr-mostly-3d-printed link to the assembly video(how to…
Easy print, opening to the top. I would go with more stable infill, something like 35 / 40 -ish percentage. Use two screws to mount it to the wall. Note: You cannot mirror it and properly use it i think. Because there are some certain…
Radial-Wellendichtring Ø 35 x 22 x 6 (Simmering) !!! NICHT FÜR VERBRENNUNGSMASCHINEN oder Schmierstoff haltige Getriebe geeignet!!! !!!Dies Teil soll einen handelsüblichen "Simmering" ersetzen. ACHTUNG NICHT in Verbrennungsmaschinen,…
Bracket to clamp a Brennestuhl power strip to your desk. Uses a 3d-printed set screw to tighten against the desk. Use a PH2 bit to carefully screw it in. Don't overtighten, or it will strip. I used 4 M6x16 screws + bolds and washers to…
UPDATE: I've added the step files to the files section for this. It's not perfect, and I don't think I'll work on it any longer, but someone else is welcome to tweak and improve the design if they wish. The clamp design, specifically the…
I created a bracket for my Brennenstuhl Hugo power strip to mount the strip below my table. Same bracket for both sides of the strip. As the strip has a rectangular form it might be possible to use this bracket also for other strips.…
Stranger Things Series - Dr. Brenner "Papa"
This is a mounting bracket for brennstuhl bremounta power strips. The brackets can be used with vhb tape or csk screws. (screws recommended) For each bracket you need: 2xM4x45mm socket head screws 4xM4 Washers 2xM4 Nyloc Nuts VHB Tape or…
Simple switch cover for Brennenstuhl Bremounta power strip to block access to the switch.
Mounting bracket for power sockets with height 55mm and width 72mm like the Brennenstuhl Premium-Line. I suggest printing with 3 layer walls.
Replacement end cap for desktop extension socket that holds additional keystones for eg. ethernet. Has a recess for 8mm silicone anti-slip feet on the bottom. Premium-Office-Line extension socket such as:…
A snug fit snap mount for Brennenstuhl Premium-Protect-Line and Premium-Alu-Line double row extension leads. Uses just 3 screws per mount. How it snaps Instructions Print 2 or 3 mounts to your preference (I used 3 mounts) Level and screw…
This is a remix of jberkus' Pottery Wheel Shield Holder. A great solution to extend your splashpan to catch trimmings. An adjustment has been made to move the shield slot to the inside of the splash pan. This eliminates the gap between…
Original cord comes only with 1 clamp. not suitable if you want to put under a desk. Print in PETG
The 16-port USB hub is a godsend but I hated that it was just flat on my desk, since it's so huge. So this angles it at about 40 degrees to fit under my vertically mounted monitor. Excuse the dirty desk! Also has provisions for little…
Zum Befestigen habe ich 2 kleine Nägel verwendet. Dafür sind 2 Löcher vorhanden.
Brennenstuhl Primera-Line wall mount for 4 or 8 sockets verison
My personal spin on the right of passage: the maker coin! This one has some thin-walled features that are helpful for testing extrusion width, as well as having multiple colors for dialing in that perfect dual extrusion.…
It works really well. The magazines insert very easy. But I’m not a 100% happy with the design jet. So at first did I not wanted to share it jet. But well it works so why not, I need to work a bit more on Freecad skills before I get to be…
I made this edit quite a while ago and never got around to uploading it, I recently stumbled across the edit again, so here it is! Fits SABRENT 2.5 Inch SATA to USB 3.0 Tool Free External Hard Drive Enclosure [Optimized for SSD, Support…
Remix of the Box Lid for Brendans Too Many Bones Tyrant Boxes that allows for more information to be shown.
Every time I vacuumed my bedroom, I was annoyed by the power strips lying on the floor, so I made this holder to attach them to the bottom of the nightstands. The bracket can be screwed onto any flat surface and mounts the power strip at…
This is an IKEA Skadis mount for the Brennenstuhl Premium extension leads. Should work with any of these Premium-Line models: Premium-ALU-Line Premium-Protect-Line Premium-Alu-Line Suggested print settings: print with PLA/PLA+ no support…
