310 modeli
Hose quick connector male to ¾" BSP commonly found on UK garden hose fittings e.g. Hozelock, Gardena etc. Add one standard o-ring 2.5x11 (OD: 16mm, cross section 2.5mm) to make leakproof. I printed in standard PLA settings, supports…
BSPP Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for NPT Pipe Plugs? You can find them HERE! Product Description: These BSPP pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…
Note BSPT thread, used commonly in Europe. I'd recommend printing with the thread up, to avoid printing horizontally in thin air. Printing like this, use a small brim to increase print stability, no support needed.
For BSP Thread 1 3/4 Inch. There is also a distance holder for floating objects.
Perfect for temporarily sealing hydraulic, pneumatic, or other system components during construction or maintenance, protecting against dust and debris. This design has been thoroughly tested in real-world applications, ensuring excellent…
WARNING: HIGH EXPLOSIVE DEVICE. When triggered, this devastating weapon rips a gashing hole in the fabric of reality - subsequent spacetime reification results in a large explosion. USE: Drop mine. Once the mine stops moving, it will…
Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…
Halterung Abspannleiter Vorzelt für Tellerkopfschrauben Filament: PETG or ASA Settings: 7 Wände und je 7 Boden und Toplayer, Infill: Gyroid 42% Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I…
BSP Pipe Thread G-1/2" to Gardena Adapter. This model is best printed solid with PETG. No Supports required.
The subspace tripmine from roblox, used by Taph in the game forsaken. The core can be strung to the shell by using thin wire, and you can scale it up or down depending on how big of an explosive you need (It does not really explode it is…
Ein Absperrschieber/Blastgate für eine Absaugung mit HT-Rohr DN40. Zusätzlich werden 4 kleine Schrauben benötigt, um die Teile zusammen zu schrauben. Nicht zu fest anziehen, sonst gleitet der Schieber nicht mehr richtig. Das Teil1 muss…
Hello, here is my vision of a blast gate for HT100 mm Due to the outer dimensions of 160mm x 160mm this is especially suitable for small printers. Category: Machine Tools
BSP Pipe Thread G-3/4" to Gardena Adapter. This model is best printed solid with PETG. No Supports required.
This is my modelling of a standard snap-fit garden hose connector, combined with a 1-inch BSP screw fitting - as often used to connect to garden water pumps. (Note: the hex bolt for tightening was sized to match the outer diameter of the…
WARNING: HIGH EXPLOSIVE DEVICE. When triggered, this devastating weapon rips a gashing hole in the fabric of reality - subsequent spacetime reification results in a large explosion. USE: Drop mine. Once the mine stops moving, it will…
This is a container for pens, whose design is based on a shut-off-valve which gets used by the German fire brigade. It can hold up to 10 pens. For assembling the parts you need some glue. I used strong 2K glue, but every other glue should…
I needed to quickly plug off the end of a ¾" BSP hose on a Sunday after the hardware store had closed. 3D-printing to the rescue! This male plug for ¾" BSP fittings (washer supply hoses, etc.) did the trick. Print with at least 5 walls…
Absperrschieber Staubabsaugung für HT-Rohre der wirklich auf HT-Rohre mit 110mm (die grauen) aus dem Baumarkt passt. Alles was ich bisher heruntergeladen oder gekauft habe hat nur mangelhaft oder mit Klebeband gepasst. Man kann damit in…
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
Recommend organic supports under topmost overhang. O ring borrowed from another cheap fitting I had around.
"My greatest invention!!"
Mounting solution for the Fanatec ClubSport DD/DD+ power brick, Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and has a 38.10mm spacing from the…
Gardena Male coupler standard 3/4 BSP
Description: In spaces where every inch matters, the Compact 90-Degree Bent Pipe with 1 1/2 BSP Threads takes center stage. This 3D-printable model is tailor-made for applications like water pumps in tight confines, providing a…
I needed a connection between Schrader pump hose to any common BSP male connection. I designed for 1/4 BSPP and printed one. BSPP connection is tight. You might possibly need pliers to connect it. This is designed in Solidworks, I also…
Griff für Absperrventil, 100mm (Durchmesser) x 10 mm (Vierkant) DIN 390 B Handrad mit Wellenkranz Bitte ohne Support drucken. Handle for shut-off valve, 100mm (diameter) x 10 mm (square) DIN 390 B handwheel with shaft collar Print without…
MakeyMcMakeFace published a simple and easy-to-print measuring spoon, this is the same but with a longer handle: one version is 10cm longer, the other is 20cm longer. The +10cm version needs a print bed which is at least 18x18 cm. The…
I have designed these parts to provide a mounting solution for the SIMAGIC P-HPR to the Fanatec ClubSport Pedals V3. There are two types of bracket, one which utilizes the SIMAGIC P2000 Haptic Module Bracket (included in a kit with some…
Caps off a standard UK appliance waste fitting (e.g. dishwasher, washing machine) when the outlet is no longer needed. Printed at 15% infill, 0.15mm layers, no support. I used PETG but PLA would probably be OK. I used ironing to ensure a…
This cupholder attaches to the 2-inch OD frame tubes and features options for both a 90mm and 100mm inner diameter holder with cutouts for mug handles. Stay hydrated with the beverage of your choice while enjoying the convenience of this…
Contains the following Pipe Threads: G 1/8 (height: 15 mm) G 1/4 (height: 15 mm) G 3/8 (height: 15 mm) G 1/2 (height: 20 mm) G 3/4 (height: 20 mm) G 1 (height: 20 mm) G 1 1/4 (height: 30 mm) G 1 1/2 (height: 30 mm) G 2 (height: 30 mm)
BSP Pipe Thread G-5/8" to Gardena Adapter. This model is best printed solid with PETG. No Supports required.
I use it as an airbrush to compressor connector. Hot glue can be used to tighten and seal the connection. Category: Parts
I created a construction site barrier, which fit with the BRUDER vehicles of my son. The barriers can be used with the stands from @MrAugust26_168490 .…
I've printed it with a .4mm nozzle, .1mm layer height in PC. Other settings and materials probably work fine too.
The female thread works with a US garden hose (0.75 11.5NH seems to work well). The male thread is BSP 0.75, which I guess is used on some sprinklers in the UK and/or EU? TBH I'm not entirely sure if this is useful for any more than one…
Dekoratives Modell einer Betonmauer
Subspace Tripmine My son asked me to print a subspace tripmine from Roblox but none of the published models were in a state to be printed without supports. I designed this from scratch in Fusion so the individual components could be…
This general use platform is perfect for holding a mouse and includes an added cubby for storing small items. Can be printed without supports.
Designed for 0.2 mm nozzle but may work with larger nozzles. Category: Tools
½ inch pipe with BSP thread in both ends. Printed with 0,16mm layer height. I recommend printing theese with atleast 3mm brim. Had a few come loose without a brim. Be sure to check out my other piping models!
Dealing with high humidity in spring & equipment in the basement I have to run filament from the dryer to the extruder of the Prusa i3 MK3, found a model for adding connector to the extruder cover but had to remix for the ebox end to add…
1/2 BSP to M22 thread adapter PLEASE NOTE: use "exclusive" as "slicing tolerance" in Cura The sealing ring needs to be printed in TPU. Additional sealing tape (PTFE) could be needed. Print Settings Printer Brand: ELEGOO Printer: ELEGOO…
Pipe Fitting 8mm Hose Barb Tail 1/2" BSP Male Connector Joint Coupler Adapt
3/8th BSP plug to neaten up buzz bars or bank sticks. I uploaded the step file so it can be modified to suit the diameter of your buzz bars for a nice flush fit. The stl has a 20mm head which was perfect for my buzz bars.
This is made to accept a hose gasket. I printed in PLA+ with .1 layers and it has worked well for me. I tried it at .2mm layers and it leaked where the gasket contacted the flat surface. I recommend printing the BSP threads down with…
I use this water pump to empty my pool. But the connector to the tube is not the best tool. The water pump is delivered with an Adapter for standard hose 13, 19, 25 and 38 mm (½, ¾, 1 and 1½“) with non-return valve and connection for…
I needed nuts for a pipe fitting, so I created them in Fusion 360. The thread is a british standart pipe thread (BSP) in 1 ¼" and for the outer keywidth I've chosen 50mm. The nuts works perfectly printed in PETG with 40% Gyroid infill.…
Plug with male thread and O-ring undercut. 2 inch BSP thread. Design for easy manual capping. Maybe someone will find it useful:) Printed with PETG filament from Devil Design on Creality Ender 3 S1 Pro. Layer 0.2mm, infill 40%, with…
I think the name says it all. I suggest only using this for dry ingredients. Use common sense and so on.
Intended to fit a standard UK garden hose connector - 3/4 BSP thread A rubber o'ring - OD 16mm x 2mm diameter (should work) this must be fitted or the part will leak. Category: Household
Designed for 0.1mm layer height (0.2mm first layer height is fine). No supports required. Use 1mm thick double-sided tape pieces UPDATE: added BSP D9 version with +0.4mm clearance
The stopper nut broke on my Fanatec CSW V1 and i decided to design one due Fanatec doesn't supply any part for V1 wheelbase.
This simple hook latches on to the tube profiles of the Fanatec Clubspot GT sim racing cockpit cockpit and can hold keyboards, controllers and other accessories.
In situations demanding a space-efficient and versatile pump connector, look no further than the Compact Pump Connector. This 3D-printable spare part is a valuable addition to your toolkit, designed for home use. Dual Compatibility:…
I customised a washer to make a spacer when attaching the Fanatec Handbrake to the Fanatec Shifter. When the shifter is set up on your right, I found the handbrake to be very close to gear shift when shifting into 5th and 7th (Not I have…
A model to improve the flow lamination on the output of a garden tap when a hose isn't connected, to allow the flow to be more laminar. https://www.aliexpress.com/item/4001276476719.html I believe the specific ¾" BSP adapter was purchased…
½ inch pipe coupler. Printed with 0,16mm layer height. Be sure to check out my other piping models!
here is a very simple mount for the simagic P-HPR haptic feedback motors to mount them on the Fanatec ClubSport V3 pedals with the D-pads installed. I used two M6 screws and screw nuts to tighten them onto the pedals, and the motors are…
Material - PLA Infill - 15% Support - Tree(auto) Layer - 0.2
Will work with Elgato flex arms and other such 3rd party mounting solutions. Pick the corresponding file for either Steam Deck + , Stream Deck MK.2 https://www.elgato.com/us/en/p/heavy-clamp https://www.elgato.com/us/en/p/flex-arm-l…
A model to fit air compressor hose to tubing (can fit tubing of 2mm ID with a tight seal)
I had an impossible time trying to find any BSP fittings in my area. As my new airbrush had just arrived with the wrong hose, I was in a jam. Luckily there were ¼ NPT fitting plugs and 1/8 BSP fittings I was able to find to put together.…
fits instead of brushless badge, see also minimalistic version of this
Slides over the handbrake plastic cylinder in place of the foam grip. Designed for TPU 0.4mm Nozzle 2x Walls 10% Gyroid Infill (More if you want less ‘squish’) Use your slicer to add custom text
A pipeflange to screw to the wall, tabletop or similar. ¾" BSP pipethreaded and fits nicely with my other ¾" models.
Measuring spoons with a flat top for leveling and a deep cube-like shape for scooping. Precise to international standards for tsp, Tbsp, etc. Labeled with ‘t’ for teaspoon and ‘T’ for tablespoon. Prints well without supports. I made these…
A Vertical Mount - Great for SimHub button boxes and reading chat. A Horizontal Mount - Great for OBS, Secondary Display, and info readouts. A Hanger that attaches to the CS GT COCKPIT ACCESSORY RAIL Each vertical or horizontal mount will…
Selbst konstruierter Leitbaken. Druckzeit (Leitbake mit Fuß): 1h Material: PLA (Bake) & PETG (Leuchte, Fuß) Maßstab: 1:14,5
Bei der Text datei einfach .txt gegen cfg tauschen. Die Laser config hab ich noch nicht getestet und kann darum nur vermuten das sie funktioniert .(der richtige pin fehlt auch noch)
My wife requested a special measuring cup for our dogs bowl boosters. Has a very slight recess on bottom with dog paw pattern in it. prints with no supports.
I like the design, but found it needed a few improvements as listed in the remix section. My haptics caused the shelf and mouse to rattle. Solved with a mousepad, rim, and cabinet bumpers. It also needed a cupholder option. The cupholder…
! This is a work in progress! Parkside Performance Drill Stand The Parkside Performance Drill Stand/Press allows for easy drilling of perfect right angle holes with a Parkside Performance cordless drill. The integrated dust shoe allows…
This phone holder is designed to accommodate a wide variety of current-generation smartphones, including those with thin cases. It mounts securely to the upper accessory rails of the CS GT cockpit.
@woelpi mentioned that BSP G1_8-28 is commonly sold as M10. And that was the case of all my PC4-M10 fittings! The thread was much finer than normal M10. I took the thread from @Jorn's model, and eyeballed it to the @linus's model. It…
fits instead of brushless badge, see also bigger version of this
Taper contra nut for instrument mounting in brackets. Two inch/58.5mm British standard taper measures. Designed by table standards and increased 1% for shrinkage mitigation and clearance. If you like it please give me a follow
Side bracket for 40x40mm aluminum profiles for Fanatec Clubsport DD Pro / CLS DD / DD or DD+ Wheel Base's. The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time or…
G3/8" Threaded Hydraulic Cap – Print It, Use It, Love It! Ditch the heavy, expensive metal caps and upgrade to this smart, precision-designed G3/8" threaded hydraulic cap. Engineered for a snug, leak-free fit, it locks in place without…
Dayton TT25 Bass Shaker Mount for V3's.
Selbst konstruierter Leitbaken. Druckzeit (Leitbake mit Fuß): 1h Material: PLA (Bake) & PETG (Leuchte, Fuß) Maßstab: 1:14,5
Remixed from the ¾" BSP adapter. For use with garden hoses in most countries. Use an o-ring with an internal diameter of 11mm Printed in PETG with: 0.16mm height 100% infill Tree support
This is a mounting for the Fanatec ClubSport DD+ Power Supply. You can mount it on any Aluminium Profile 80x40 with 4xM8 srews.
Remixed from https://www.thingiverse.com/thing:5144951 Big thanks to peppesci for sharing his awesome designing and for having shared the original step file. It allows to add a male 1/8" BSP air connector. Internal airflow were enlarged…
Space-saving tablespoon fits inside your powder can. Normal tablespoon is too long because of the handle and it usually won't fit inside my chai powder or hot chocolate powder can. It's accurately 15ml.
*Updated the mounts with the official dimension from Fanatec, look for the V2 files!* This is a mount for the Fanatec Clubsport GT Cockpit. this is different from the ones that are available for purchasing. when mounted these mounts…
IBC 1000L Absperrhahn Unser Absperrhahn des IBC 1000L ist uns abgebrochen. Ihr könnt ihn in zwei Teilen ohne Support oder in einem durch mit Support drucken. Infill: 100% (oder je nach Bedarf weniger) Stützen: nicht notwendig wenn ihr…
2 inch / 50mm male to male pipe nipple to connect pool-pump pipes to pool inlet and outlets. Part of the profile is Hexagonal to assist with tightening using suitable hand tools. Used PETG and I found minimum 3 wall and 30% infill strong…
Montessori angelehntes Farben-Sortierspiel. Die Kugeln können mithilfe des Löffels in die einzelnen Becher zugeordnet werden. Das Spiel fördert die Feinmotorik, die Kugeln können nach Farben sortiert werden, es kann zum Zählen lernen…
As I lost the original joystick from my BSP-D8 controller, I designed and 3d printed a new one. It has a curved profile for comfort Recommended print settings: Lowest layer height your printer is capable of Print in the provided STL…
G1/2 Female to G3/8 Male Reducer (BSP) is a practical and lightweight solution for those who need to adapt connections quickly and efficiently. Made from high-quality PETG – a resistant, durable material with excellent mechanical…
ENGLISH: These disks are used for triple guying of a Spiderbeam antenna mast. The dimensions are for the 12m HD model. They are designed to be threaded on from the top and then sit on the next largest mast element so that it does not go…
Printed with PETG No supports required ¾'' BSP to ½'' BSP threads.
Material - PLA Infill - 15% Support - Tree(auto) Layer - 0.2
Of course there are several other Mag-Shifter Mods out there, but one of the main issues i had with them: They all relied on glueing magnets to the plastic. Which i think is neither nice to look at, nor very long term stable. Since these…
All is in the title don't really know about the infill, i usually do 100% when it needs to be water tight Might need supports on the hex part UPDATE Better joint seat on faucet side
Parkside PABSP 20-Li B2 držák 9 bitů
This is a functional and easy-to-print garden shower nozzle designed with a standard G 3/4" BSPP thread, making it compatible with most European garden hose systems like Gardena or Bradas. The model features a spray head with vertical…
