Wyniki wyszukiwania: bung

Sortowanie

501 modeli

P
Printablesbmccarthy321

Rain Barrel Bung

I started with drilling a hole in the side of my rain barrel to allow drainage, but I needed to put a screen over it to keep the bees out. So instead, I made this bung so I could put a screen fitting in place instead. Since then, I've…

Wydruk około 8,12 €–9,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
317
Polubienia
43
Ocena
5
P
PrintablesOBA

PG29 Blind Stuffing-Adapter to 3xPG7 Cable Gland/ PG29 Blindstopfen-Adapter auf 3xPG7-Kabelverschraubung

PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for (1-3)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…

Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
68
Polubienia
22
Ocena
5
P
PrintablesOBA

PG21 Blind Stuffing-Adapter to 1xPG9 Cable Gland/ PG21 Blindstopfen-Adapter auf 1xPG9-Kabelverschraubung

PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
43
Polubienia
5
Ocena
0
P
PrintablesOBA

PG36 Blind Stuffing-Adapter to 4xPG9 Cable Gland/ PG36 Blindstopfen-Adapter auf 4xPG9-Kabelverschraubung

PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…

Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
36
Polubienia
9
Ocena
0
P
PrintablesOBA

PG21 Blind Stuffing-Adapter to 1xPG7 Cable Gland/ PG21 Blindstopfen-Adapter auf 1xPG7-Kabelverschraubung

PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG7 cable gland for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffing with PG7-thread. [1] Thread types: PG thread…

Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
28
Polubienia
7
Ocena
0
P
PrintablesOBA

PG36 Blind Stuffing-Adapter to 3xPG9 Cable Gland/ PG36 Blindstopfen-Adapter auf 3xPG9-Kabelverschraubung

PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-3)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Wydruk około 1,19 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesFilip Meller

Bungee jumping Jeesus

Fun model of Jesus Christ bungee jumping off a cross. I used evandronet s model of Jesus, Thank You! This model is not intended to offend believing Christians! You can modify everything in attached fusion document. If you remix it and…

Wydruk około 12,49 €–15,26 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesOBA

PG36 Blind Stuffing-Adapter to 4xPG7 Cable Gland/ PG36 Blindstopfen-Adapter auf 4xPG7-Kabelverschraubung

PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-4)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…

Wydruk około 1,70 €–2,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesOBA

PG42 Blind Stuffing-Adapter to 4xPG9 Cable Gland/ PG42 Blindstopfen-Adapter auf 4xPG9-Kabelverschraubung

PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesOBA

PG29 Blind Stuffing-Adapter to 1xPG9 Cable Gland/ PG29 Blindstopfen-Adapter auf 1xPG9-Kabelverschraubung

PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesOBA

PG48 Blind Stuffing-Adapter to 5xPG9 Cable Gland/ PG48 Blindstopfen-Adapter auf 5xPG9-Kabelverschraubung

PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Wydruk około 1,86 €–2,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
22
Polubienia
7
Ocena
0
P
PrintablesOBA

PG48 Blind Stuffing-Adapter to 6xPG9 Cable Gland/ PG48 Blindstopfen-Adapter auf 6xPG9-Kabelverschraubung

PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-6)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…

Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesOBA

PG42 Blind Stuffing-Adapter to 5xPG7 Cable Gland/ PG42 Blindstopfen-Adapter auf 5xPG7-Kabelverschraubung

PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…

Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
21
Polubienia
5
Ocena
0
P
PrintablesOBA

PG48 Blind Stuffing-Adapter to 7xPG7 Cable Gland/ PG48 Blindstopfen-Adapter auf 7xPG7-Kabelverschraubung

PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-7)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…

Wydruk około 1,18 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
20
Polubienia
6
Ocena
0
P
Printableslordbale

Dartscheibe übungsringe

Verschiedene Dart übungsringe

Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesOBA

PG29 Blind Stuffing-Adapter to 1xPG7+1xPG9 Cable Gland/ PG29 Blindstopfen-Adapter auf 1xPG7+1xPG9-Kabelverschraubung

PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Wydruk około 1,04 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesOBA

PG42 Blind Stuffing-Adapter to 5xPG9 Cable Gland/ PG42 Blindstopfen-Adapter auf 5xPG9-Kabelverschraubung

PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…

Wydruk około 1,68 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
17
Polubienia
4
Ocena
0
P
PrintablesShelXle

Keine Werbung post box sign with magnets

Get no physical spam in your post box.

Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 11

PAL-Übungsaufgabe 11

Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 13

PAL-Übungsaufgabe 13

Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 14

PAL-Übungsaufgabe 14

Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 15

PAL-Übungsaufgabe 15

Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 22

PAL-Übungsaufgabe 22

Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 25

PAL-Übungsaufgabe 25

Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 27

PAL-Übungsaufgabe 27

Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 28

PAL-Übungsaufgabe 28

Wydruk około 3,06 €–3,74 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 33

PAL-Übungsaufgabe 33

Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 12

PAL-Übungsaufgabe 12

Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 17

PAL-Übungsaufgabe 17

Wydruk około 1,96 €–2,39 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 31

PAL-Übungsaufgabe 31

Wydruk około 2,10 €–2,57 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 38

PAL-Übungsaufgabe 38

Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesDvG3DAtelier

Wallmount Speedmarker Lets Bastel Create - Improved handling / verbesserte Handhabung

The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled

Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesMr. MegaTronic

the American Craftsman Bungalow Birdhouse

the American Craftsman Bungalow Birdhouse! This birdhouse features two entrances, upper ventilation through the chimney and windows as well as sloped drains in the base to allow fluid to run out. There are multiple interior platforms…

Pobrania
4938
Polubienia
1960
Ocena
5
P
PrintablesTomHoyleDesign

Mouse Bungee

Remix of my original mouse bungee with added cut-outs for 12mm diameter bumpons for desk. Added STL for people who want to edit this. Print Settings 0.2mm, Brim, 80% infill Notes: Rotate 220 degrees on the Y axis so the top of facing the…

Pobrania
3415
Polubienia
287
Ocena
4,9
P
PrintablesDJ

oil liquid fluid funnel with screw (thread) for cans - Trichter mit Verschraubung für Flaschen, Kanister Öl Flüssigkeiten

I created some funnels with different sizes of threads/screws that you will find on fluid cans for antifreeze fluids (car) windshield cleaning fluids (car) engine oil (car, motorbike) gear oil (car, motorbike fork oil (motorbike) … The…

Pobrania
1443
Polubienia
322
Ocena
5
P
PrintablesDasMia

Mouse Bungee

Looking for a smart way to hold your mouse cable in place? Try this mouse bungee! Just print both files, put the cable in between and screw the parts together. You can use double sided tape to fix it on your desk or a M3 screw to place it…

Pobrania
755
Polubienia
101
Ocena
4,9
P
PrintablesEmmett_Grames

Gaming Mouse Bungee (Cable Holder)

This simple and stylish device holds your computer mouse cable above the desk, making use of the mouse more comfortable without the cable dragging around. Additionally, it has storage for the excess cable in the base, eliminating some of…

Pobrania
692
Polubienia
162
Ocena
4,75
P
PrintablesOtty_Skipper

Molle MultiFix - "anythingholder" Paracord or bungee cord

Molle MultiFix : for the well-known molle system, this offers a lot of individual application options. You can use it with paracord, bungee cord (rubber band) or any rope you have on hand. Simply thread the paracord and you can attach…

Pobrania
652
Polubienia
254
Ocena
5
P
Printableschristofferrap

Plastic barrel bung caps with gardena hose connector

70 mm and 55 mm plastic barrel bung caps with buttress thread for plastic barrels with closed tops. The caps has a 26 mm fine thread for connecting a included gardena hose connector or just a plugg. The gardena connector part with 26 mm…

Pobrania
630
Polubienia
57
Ocena
0
P
PrintablesMearcat

Poly Barrel Bung Cap & Wrench (cross pattern)

Replacement bung for 210L/55 gallon poly barrels that have a coarse buttress type thread, not NPT fine thread. The OD of the bung cap thread is approx 56mm. Included in model is a bung cap with/without hole for 1/2" OD hose, and hand…

Pobrania
623
Polubienia
18
Ocena
5
P
PrintablesBlack_Wolfie

Bungee/shock cord clamcleat

This is a remix of an old injection moulded model I found. I printed in ABS for strength and environmental resilience, but would probably work with PLA, PETG, etc… The bungee/shock cord goes through the hole at the back and is pushed down…

Pobrania
538
Polubienia
103
Ocena
5
P
PrintablesFlotschi

Bungee Hook adjustable

This is an adjustable bungee hook. The blue and yellow hook works with a 6mm bungee rope. The black one is a 3mm bungee. Just scale the hook 50% down in your slicer to fit 3mm. Scale the hook up or down for each type of rope you have.…

Pobrania
473
Polubienia
154
Ocena
5
P
PrintablesWundergran

Mountable mouse cord bungee

Introduction This is a printable mouse bungee that mounts to the back of your desk by an included screw. It helps keeping your mouse cord from getting tangled into the back of your desk or other stuff on it. The model does not require…

Pobrania
437
Polubienia
56
Ocena
5
P
PrintablesJGW

Nut M12x1.5 [cable gland, Kabelverschraubung M12 x 1,5]

M12x1.5 nut M12 cable glands need a 17mm wrench for the nut and a 15mm wrench for the gland itself. If you're operating in a tight space, a 15mm nut might help! If you need a specific size and you're not into FreeCAD that much, let me…

Pobrania
434
Polubienia
40
Ocena
4,33
P
PrintablesLenbok

Bungee cord connector

This Thing lets you convert a piece of bungee cord into a general purpose adjustable, secure, yet easily undoable elastic fastener. They are often used to attach a bicycle to a car bike rack, but can be used in plenty of other situations,…

Pobrania
427
Polubienia
69
Ocena
4,83
P
PrintablesNorkkon

Bungee Cord Hooks - Adjustable

These adjustable bungee cords are the bees knees. You can cut a bunch of 6mm bungee cord to 24-36" and slide the hooks to what ever length you need. I use these things for everything, Will they work as well as a metal bungee cord, likely…

Pobrania
341
Polubienia
76
Ocena
4,83

Standard Barrel/Drum Bung/Plug/Adapter for S64-5 Buttress Threads (SCAD + STL)

UPDATE: Completely replaced the DK thread library used for the NPT ports (and the prendered port objects). The new tool is much faster, and renders are much cleaner and lighter. UPDATE: Changed buttress thread to have a fancy radiused…

Pobrania
339
Polubienia
21
Ocena
0
P
Printables3DBrooklyn

Bungee Carabiners

The Bungee Carabiner lets you use your keys without removing them from your belt loop / backpack / etc. so you will not lose them and never have to worry about dropping them. After pulling the keys out, simply pull on the slotted part of…

Pobrania
339
Polubienia
115
Ocena
4,75
P
Printablesprider

Drum Bung Wrench

This is a remix of the 55 Gallon Drum Cap Tool by loudaslife. All I did was add a handle to his design using Fusion 360. I recommend printing this with at least a 75% infill, with a cubic infill pattern for strength. May be a good idea to…

Pobrania
324
Polubienia
23
Ocena
0
P
PrintablesPaulZ

Mares Genius Bungee adapter

Adapters to replace Mares Genius dive computer strap with bungee cords. Initial design using nylon block and file by fellow dive club member Alex P. Print instructions Printed in TPU98. Infill: 40%. Perimeters: 4

Pobrania
287
Polubienia
3
Ocena
0
P
PrintablesTomusPrint

Mouse Bungee Screwable

A little remix of TomHoyleDesign's model that allows you to fix it firmly to your desk.

Pobrania
274
Polubienia
33
Ocena
4

Bugsnax inspired, Bunger, Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Bunger, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.

Pobrania
268
Polubienia
19
Ocena
0
P

RC-Felge ÜBUNG

RC-Felge ÜBUNG dies war ursprünglich als Basis zur Übung für einen Kollegen ( FreeCAD -Einsteiger) , als Übung zum "basteln" entstanden. Die Maße sind frei ausgedacht daher NICHT passend für gängige Systeme! ABER ich habe die FreeCAD…

Pobrania
266
Polubienia
23
Ocena
5
P
Printables3DBrooklyn

Bungee Carabiner V2

The Bungee Carabiner lets you use your keys without removing them from your belt loop / backpack / etc. so you will not lose them and never have to worry about dropping them. After pulling the keys out, simply pull on the slotted part of…

Pobrania
265
Polubienia
110
Ocena
5
P
PrintablesJoseph

Bung Wrench

A hand wheel style wrench to remove the bung cap from food grade 55 gallon barrels. I printed this in PETG with 4 walls 25% infill and .16 layer height, and it seems to be strong enough, but 6 walls might be best.

Pobrania
247
Polubienia
138
Ocena
0
P
PrintablesSTxS

Teleskopverschraubung / telescopic screw connection Ø21 to Ø17 mm

Mutter: Layerhöhe 0,16 mm / Infill 100 % / kein support / Slicingtoleranz “EXKLUSIV” / Material PLA+ Klemmteil: Layerhöhe 0,2 mm / Infill 100 % / kein support / Slicingtoleranz “EXKLUSIV” / Material TPU TPU A95 von 3DJake Dieses Filament…

Pobrania
236
Polubienia
56
Ocena
0
P
PrintablesAndys1957

Feuerwehr-Übungsturm zur Fahrzeughalle in H0/1:87

Viele Leute nutzen meine “Fahrzeughalle mit bewegl. Rolltoren” ( https://www.printables.com/model/796208 ) als Feuerwehrgebäude. So kam die Frage nach einem Schlauch-, bzw. Übungsturm auf. Bitteschön, hier ist er… Der Turm besteht aus…

Pobrania
230
Polubienia
36
Ocena
5
P
PrintablesMackayz117

Mag Pouch Bungee Pull Tab

It gives you a better grip to pull the bungee cord off the magazine. should work with any mag pouch that uses bungee cord keepers. I printed it with fuzzy skin in PrusaSlicer to give some texture to it to help aid with grip.

Pobrania
227
Polubienia
48
Ocena
5
P
Printablesdworki

Suunto SK-8 compass bungee mount

After a couple of dives I found out that I hate the watch type strap on my compass. OpenSCAD to the rescue! :-) The mount is designed for 3mm bungee and lets you put it on while loose and pull the cord from the back to front to tighten…

Pobrania
215
Polubienia
27
Ocena
0
P
Printableseloplunto

Bitte keine Werbung

Einfaches “Bitte keine Werbung” Schild welches an den Briefkasten geklebt werden kann

Pobrania
213
Polubienia
16
Ocena
5
P
PrintablesModel Magic

REVISED: Captain Caveman - Unga Bunga!- 1977-1980

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
211
Polubienia
38
Ocena
0
P
PrintablesRumbledoc

Schottverschraubung / Bulkhead screw

Printed with CF-Nylon or ASA vor high strength. For 25mm inner diameter tube / Für Schläuche mit 25mm Innendurchmesser. Printer Settings: Printer: Creality Ender 2 Infill: 100% Supports: No Raft: / / Speed: slow 25mm/s Material: ESun EPA-CF

Pobrania
204
Polubienia
16
Ocena
5
P
PrintablesDonny

bungee cord ball

I recreated the bungee balls that our boy scout troop uses to tie down the dining fly to the frame work

Pobrania
203
Polubienia
21
Ocena
5
P
PrintablesChristophB

Auer Eurobox/Trobolo Clips for Rubber Bungee Attachment

I designed some removable clips to attach the “flushing” spray to my Trobolo mobile dry toilet. Can be used for any Auer Euro boxes. They have a cone on the back to fix them in a vertical section of the box. Easy to clip on and off for…

Pobrania
194
Polubienia
48
Ocena
4,5
P
Printablesolendorf

55 Gallon Barrel bung cap wrench

A bung wrench to help remove caps common on 55 gallon plastic barrels or drums. Print Settings Printer Brand: Printrbot Printer: Simple Black Rafts: No Supports: No Resolution: .2mm layer Infill: 20 - 25% Notes: Print handle down, Teeth…

Pobrania
189
Polubienia
22
Ocena
4
P
PrintablesVerbs

E-Track Cargo bungee cord clip v2

Initial version of this was one of my first self-designed products shortly after acquiring my printer. After a few months of design and print experience, and failures of my original design, it was time to re-visit this. The new design is…

Pobrania
185
Polubienia
27
Ocena
5
P
Printables3DJourney

Electric fence / bungee tape / tape gate insulator handle

Used for break fencing paddocks when connecting a “hot” electric wire to a inert wire. This isolates the live wire from whatever you connect it to (usually a non live wire). Print Settings Setting Walls 2 (min) Layer Height 0.2mm Nozzle…

Pobrania
182
Polubienia
21
Ocena
0
P
PrintablesBaGooN

Mouse Bungee

The mouse cable is secured to the tip of the spring using zip ties, and the spring is fixed at the desired angle using M3x14mm screws and M3 nuts. I recommend the following three methods for securing it to the desk: Use double-sided tape…

Pobrania
181
Polubienia
32
Ocena
5

Bungee cord tie-down for 6mm

Allows to make secure tie down that clicks into the cleat. Simple knot on the other side, improved slide surface for easy feeding in. Use 6mm cord line, infill 100%, 0.2mm layer, no brim with slowed down first layer on textured plate for…

Pobrania
180
Polubienia
31
Ocena
5
P
PrintablesMP3D

Computer Mouse Bungee

UPDATE: 30/01/2021 V2 - same design but have some details ( Wife request :P ) Base V3 - work in progress but is a bit crazy, is compatible with any top part. Another add-on for my desk, mouse cable is somethings that is always on the way,…

Pobrania
180
Polubienia
41
Ocena
5
P
PrintablesMrPorcine

Kayak deck fitting with single hole for deck line or bungee

Deck fitting for bungees or deck lines. Use a 4 or 5mm oval head bolt. This one has only one hole for the line. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: .2mm Infill: 10 perimeters to ensure…

Pobrania
179
Polubienia
39
Ocena
0
P
Printablesderandi3D

Brompton - Seatpost Bung

The Brompton Seatpost bung is a rubber bung which fits into the underside of the seat post, acting as a cushion to prevent clunking against the ground when it is lowered down. Before 2016 it was a rubber-part secured with a screw to…

Pobrania
178
Polubienia
24
Ocena
5
P
PrintablesCmottiv

Bungee Cord Hook v1

Bungee cord hook can be resized for different cord sizes.

Pobrania
174
Polubienia
11
Ocena
0
P
PrintablesLasuJuhani

Mouse Bungee (remix)

for more info see original model https://www.printables.com/model/90240-mouse-bungee

Pobrania
173
Polubienia
13
Ocena
0
P
PrintablesY0tsuya

Drum Bung Wrench

All the models I found so far doesn't fit the fine thread cap which came with my 55 gal barrel so I made this. Works with both fine and coarse thread caps. Balanced design allows quicker turning when cap is loose.

Pobrania
173
Polubienia
14
Ocena
5
P
Printablesqifany

Shearwater Teric Bungee Mount

This Shearwater Teric bungee mount is created to provide a secure and adaptable mounting solution for the Shearwater Teric dive computer. It is engineered to accommodate a 5mm bungee cord , ensuring a secure and adjustable fit for your…

Pobrania
170
Polubienia
13
Ocena
5
P
PrintablesSTEP

Anycubic Chiron Brace Verstrebung

Summary parts list 2x threaded rod M10 L=900 8x nut M10 10x T-Nut M5 10x M5x25 hexagon socket head cap screw 2x M5x40 hexagon socket head cap screw You have to drill two M5 threads in top of the chiron to fasten the screws marked in the…

Pobrania
169
Polubienia
28
Ocena
5
P
PrintablesLoboCNC

Micro Bungee for TPU Filament

Turn a spare few cm of your TPU filament into miniature bungee cords. You can make a straightforward bungee cord with two hooks, make a simple strap with one buckle, or mix-and-match to create any manner of web or net. The unique E-Z…

Pobrania
169
Polubienia
107
Ocena
5
P
PrintablesKuro Man Kuro

Nintendo Switch Pro controller travel bungee case

Hi there. I have been frustrated by my Switch controller many times while traveling. After a long day of going places and doing things I just want to unwind with some Rocket League or Tears of the Kingdom, but I always find my controller…

Pobrania
167
Polubienia
25
Ocena
0
P
PrintablesGarage Maker

Uwatec bungee mount deepmeter

I print it in PETG and recommand to use 4 M3x6 or M3x8 screw.

Pobrania
158
Polubienia
11
Ocena
5
P
PrintablesGlen Hay

Bungee Cord Eye Maker

This is used to make an eye in the end of bungee cord and comprises two parts - the bones that secure the cord, and a slip-on cover. It can easily be removed, adjusted for size, or reused. There are 3 sizes supplied for 3, 4, and 6mm…

Pobrania
152
Polubienia
40
Ocena
5
P
Printablesdon frechdachs

Mouse Bungee Monitor Mount

Hi threeD Printers, This Mouse Bungee attaches to your monitor using strong adhesive tape, eliminating mouse cable tangles and drag while enhancing the cleanliness and fresh appearance of your setup. It's designed to be partially printed…

Pobrania
152
Polubienia
34
Ocena
5
P
PrintablesStinkyPete

Bungee Cord Tie

Printed using PLA+ Make the loop from 6mm bungee cord, and secure with a cable tie, as seen in the photos. Cut the bungee to length to suit the size of your bundle. These can be used for securing your hoses, sullage pipes or power cords…

Pobrania
146
Polubienia
21
Ocena
5
P
PrintablesTanner3D

1/18 scale 55 gallon drum with removable lid and bungs

For use in your action figure play sets and dioramas a 1/18 scale 55 gallon drum.

Pobrania
144
Polubienia
22
Ocena
0

Brewzilla 35/65L Gen 3 Glass Lid Bung

What is this? This is a basic bung I designed to seal the 40mm hole in the lid of the Brewzilla 35/65L Gen III all in one brewing device between brews, when it is in storage in my garage. Previously I was using masking tape, which was…

Pobrania
144
Polubienia
15
Ocena
4
P
Printablesbredlmax

Keine Werbung Schild Briefkasten

Zweifarbiger Druck erforderlich. Anleitung siehe hier unter “Datei”. Der Wechsel des Filaments während des Drucks mit Cura Slicer und Drucker ist sehr einfach. Der Slicer erkennt automatisch das 2-farbige Schild und bietet den…

Pobrania
143
Polubienia
9
Ocena
5
P
PrintablesAndreas G

Keine Werbung Schild 20x45mm

“Bitte keine Werbung” Schild (sign) Gcode beinhaltet einen Farbwechsel (gcode contains a color change) 20x45mm

Pobrania
140
Polubienia
11
Ocena
4,67
P
PrintablesBathtubJoe

Bungee Cable Wall Hook / Loop

Printed in Prusament PLA, GCODE attached takes 4.5 hours to print two side by side, with supports. For use with 2mm width screws (drywall screws), simply screw the fixture into the wall, and hook up your bungee cord to both hooks to hold…

Pobrania
135
Polubienia
13
Ocena
5
P
PrintablesStefan

Suunto D4 Bungee Mount

This is my bungee mount solution for my Suunto D4 dive computer. :) Material: 2x printed bungee mount adapter 2x original metal pen from the bracelet bungee cord 3mm I've printed it with ASA filament, since is seems much more robust than…

Pobrania
135
Polubienia
3
Ocena
0
P
Printablesthenickfish

55 Gallon Bung Wrench (Ratchet Drive)

Modified bung wrench to work with a 1/2" ratchet instead of a 3d printed handle.

Pobrania
135
Polubienia
8
Ocena
5
P
PrintablesBubTec

Bungee Goodman Handle for Wurkkos DL07 V3 (Scuba Diving Light)

Bungee mount for DL07. Update: Now in version V2 with wider base and deeper holes for the bungee knots Update: In version 3, the thickness was increased so that the nodes are completely hidden in the holes. Feel free to leave a like or…

Pobrania
132
Polubienia
34
Ocena
0
P
Printablesrebeltaz

55-Gallon Drum Plug Bung Wrench

Is your water storage up to date? You'll need this to get that plug off your 55-gallon water barrel if you want to be sure. This comes in two versions. Pick which one you like and print the two parts associated with that version.…

Pobrania
130
Polubienia
28
Ocena
5
P
PrintablesMarcelloV

Mouse Bungee

MOUSE BUNGEE Works for 16 to 20mm thick desks. No screw no glue

Pobrania
128
Polubienia
16
Ocena
5
P
PrintablesTiques77

Bungee little Hook adjustable

An adjustable bungee hook for many types of attachments. smaller hook than the original model

Pobrania
125
Polubienia
17
Ocena
5
P
PrintablesJDS

Replacement Cooler Bung (Stopper or Cap)

This is a replacement bung for a cooler's bunghole, i.e., a stopper or cap for the water drain hole on the side of a cooler. My old bung disintegrated after years of faithful service stopping liquids from coming out of the cooler's…

Pobrania
124
Polubienia
5
Ocena
0
P
PrintablesBubTec

Suunto SK8 Bungee Mount (TPU) Scuba Diving

Bungee mount for the Suunto SK8. It is very tightly constructed. But the inner holds very well in it. You have to fiddle a bit to get the whole thing together. If it is too heavy for you, simply increase the scaling in x and y a little.…

Pobrania
123
Polubienia
15
Ocena
0
P
PrintablesFabian Bean

Briefkasten Schild - "Keine Werbung"

Ich denke das Modell ist selbsterklärend. Kann in einer Farbe gedruckt und später mit einem Edding bemalt werden oder wie auf dem Beispielfoto zu sehen in zwei Farben gedruckt werden. Das Schild auf dem Beispielfoto ist in PLA gedruckt…

Pobrania
122
Polubienia
13
Ocena
5
P
PrintablesStefan

BigBlue Bungee Mount

Slim bungee mount for my VTL3500P BigBlue dive torch. Additional material: 1x screw M3 x 15mm 1x washer M3 10x1mm 1x bungee cord 4mm See my goodman handle for this torch: https://www.prusaprinters.org/prints/33673-bigblue-goodman-handle…

Pobrania
121
Polubienia
20
Ocena
0
P
PrintablesVerbs

E-track Cargo bungee cord clip

Needed a simple, light duty e-track bracket for bungee cords to clip into to hold lightweight camping gear in the trailer. This is one part, easy to print, clips in easy, holds well, easy to remove. I've put at least 50 lbs of weight on…

Pobrania
118
Polubienia
13
Ocena
0
P
PrintablesParsupo

xiaomi scooter (pro 2) bag hook and bungee cord hook

A hook so you can carry a bag with you on the scooter. Additionally there is a hook for a bungee cord, to keep your bag in place.

Pobrania
117
Polubienia
12
Ocena
5