323 modeli
TP-Link Tapo C200 is a nice IP camera from TP-link. This is a bracket allowing it to wall mount in upright or downright position.
Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ceiling mount for tapo camera.
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple stand or wall mount for Camera Tapo C200 & C210. The stand is available in several height variants (if you need a different one, let me know and I will add it).
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
Original Dyson part number 906960-11 Does it differ from the original? Yes, although it's functionally the same. I haven't added those weird ovals around the outlet. I don't think they add much to structural strength. Underside brush is…
Wydruk około 3,07 €–3,75 € nettoWstępna wycena jednego wariantu
The “notched” version allows routing cables below the device, otherwise they need to go around the sides. Use a skirt to keep the (at first) separated pieces in place while printing. The version “with USB stick holder” has three slots for…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
The Spacecraft The Dreamchser DC200 is a proposed crewed version for the Dreamchaser cargo spacecraft developed by Sirra Space Printing, Assembly tips Components, epechally tail fins have loose fit, use of glue is adviced Supports for…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Very simple wall mount for the remote AC200 Meliconi. Here is the remote: https://amzn.eu/d/5c9Hx9s I never found one for this model of remote, and I create this with 2 holes for M4 screws.
Wydruk około 3,07 €–3,76 € nettoWstępna wycena jednego wariantu
The Psion MC series has two expansion slots at the back, mine came with two expansion ports, other owners have no expansion ports or covers. This design contains a “Full Expansion” model which fills the entire slot, and an “Empty…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
Update 2026 : Added v2 mount with minor fixes Update 2024 : Added M12 screw with hex head ---------------------------- I've designed this support for Tapo camera C200 / C210 / C220 to be mounted on various baby cribs. Print specs: 0.2…
🙌 Show Some Love If this works for you, please drop a Like and post a Make! It really helps the model get seen. Feel free to remix it to your heart's content. I designed this for a perfectly tight fit. It features custom cutouts on the…
Wall Support / Mount for Tapo C200 C210 C211 C220 C225 TC70 TC71 WIFI Security Camera Compact upside down wall hanger wich uses original Tapo support (replacement available in the files) 8 holes = 4 positions (set the origin of the cam)…
I would be very happy about a Make, Like or Share! Happy printing!
With this design you can mount your TP-link ER605 and OC200 the proper way. You wil also need the Ubiquiti Networks ER-RMKIT. I used M3 10mm screws to screw the printed parts together.
UPDATE 24 Apr 2023 : I've added a (slightly larger) version for the TP-Link Tapo C225 camera - I don't have this camera myself, but thanks go out to fellow Thingiverse user @phagosome who has printed it and confirmed that it works. The…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
TP-Link Tapo Camera Inverted Mount This is a remix / mashup of Kadows' upside-down Tapo camera stand and Cewo's Tapo base (https://www.printables.com/model/377139-tapo-base-c210). Design I printed the orignal but found that the stand was…
I contacted the Maker of the Model STP9000 and asked to edit it for SC2020. Thanks for your permission chilluniverse@chilluniverse ! Remix for Holder Sepura SC2020 with Speaker. Happy printing! #STP9000 #STP9038 #SC2020
I did a quick search and found this g-clamp that would suite my needs perfectly, so I modified the body of the clamp to take my Tapo C200 wall mount. If you want to use it, download the files here. Also download my Tapy C200 mount here .…
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link OC200 Omada Cloud Controller side-by-side with a TP-Link TL-SG1005P 5-port PoE switch. Parts Required This adapter is split into two pieces so that it fits…
Mount for a Nitecore EC20 flashlight (21mm diameter). You will also need: 2x M3x30mm bolt, 2x M3x12mm bolt, 4x M3 nut
how to use Use a M4 screw with a flat underside of the head. The head can be up to 4mm thick. how to print Print wings on the bottom. Enable snug supports. The only support will be in the middle. Put the mount horizontally on a mouse pad…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
This is a Highstand for my Tapo C210 Cam, this stand helps me to observe my 3D Printer with the best view in the right position. Feel free to give me feedback and share your prints, I appreciate every comment and download or even a small…
Simple stand for TAPO C200 cam that I've designed to make it stand taller. Change filament after the legs are printed to give it a two color look.
For my use case, I needed a stand with a steep angle to see the floor in one of my rooms. It fits really snug, so depending on your printer and settings you might have to experiment with the step file a bit.
Original mount pad for Xiaomi smart cam C200
Printer: Creality Ender 2 Pro Filament: Kingroon Orange PLA Temperature: 205°C
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link ER7206 Omada VPN router side-by-side with a TP-Link OC200 Omada Cloud Controller. It includes a passthrough window for ease of cable routing from your WAN…
A light frame for 11mm servo - weight is just around 2,4 - 2,6g Designed for a Graupner C2081 Servo - but other 11mm servos like Hobbyking 939 should also fit. To create a left and right version mirror the STL file in your slicer Print…
1x1 C2032 battery holder for the Gridfinity system. Print details: Ender 3 S1 PRO PLA 15% Infill CHEP EXTRA FAST 0.28MM CURA SETTINGS
TP-Link TAPO C200 Wall/Ceiling mount
🇬🇧 Here is a Tapo C200 camera mount for the Ikea Skadis panel. Printed in 0,2mm with 20% infill (The camera isn't heavy). The hooks need supports to print. Fusion 360 file included if you want to make changes. 🇫🇷 Voici un support de…
Make sure to print the arm strong enough.
this uses 2 screws to retain each module. it fits the standard 1u rack with little adjustment. i was able to print it on my ender 3. I used like 10 walls so that it was a solid part. it's printed in two parts to fit an ender 3. you will…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
Tip: I attached the helmet with soft double-sided tape to ensure a better helmet fit. And i use two camera riser Print with supports! I used 1kg of PLA in army green
My wall mount broke and i needed a replacement, so i designed this. Its easy to print, just enable bridging and print. I recommend using more perimeters for a more stable result. Took me 23 minutes to print on my Prusa MK3S with 4…
I didn't want to use the screw that the original mount requires. My crib wall is ~19mm thick so I cut small chunk out of the original model such that the gap was ~20mm. While it makes the model less versatile, it is a little more…
A 6-inch Rack Mount for the TP-Link SG1005P | SG105 | OC200 series. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print…
Flexible Halterung für die TP-Link Tapo c200 Kamera. Die zwei Teile können in der Höhe flexibel zusammen geschraubt werden. Für einen stabileren Halt kann der Fuß nochmal von hinten angeschraubt werden.
I don't like attaching the microphone-speaker to the antenna of the radio when it's not in use. The antenna is for transmission and not for mounting things. That's why I designed a holder that rests on the two holes on the back of the…
Mount for the Behringer UMC202HD USB audio interface (maybe works for other models, too). The front plates are hold in place by M4 melting inset nuts. Printed in Devil Design PETG on a Prusa Mini clone.
This rackmount adapter is designed to mount the TP-Link OC200 controller in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Enhance your Tapo C200 camera setup with this custom-designed stand. Made to be 3D printed flat without the need for supports, it’s easy and efficient to produce. This stand improves the camera’s field of view by allowing additional…
Soporte en 25º para Camara tapo C200 Video: https://youtu.be/hS_2T3ddfM0
Summary Simple and quick-to-print corner mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same…
Modeled in Fusion 360 Printed in PLA .2mm layer height
Wanted to use a cheap indoor home automation PTZ camera to ‘spy’ on our new puppy. Most of the surfaces nearby were too close and too high, so quickly designed and printed this angle mount to all the camera to be mounted at an angle so we…
I wanted to use the space between the stock cup holders to place a slot sized for a folded Motorola Razr+
A swing arm adjustable mount for the Tapo C200 camera. I use this camera to remotely monitor my prints and the adjustable mount is handy if you need to move the camera away to access your printer. Additional parts required: 4x M4x30…
remix from 6.5 inch rack i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.
I needed a mount for the Tapo C200 that could be applied to the ceiling with adhesive. So here it is. Printed in PETG, using IKEA ALFTA adhesive.
Remix from misterT(thanks!). I added a hole in the middle to save time & filament. The angle is about 15°. Original text: Simple speaker stand for the desk. Raises the front of the speaker by about 25 mm. I added some holes on the bottom…
15 degree base for Tapo C200 camera or can be used whitout feet for a flat base. Supports needed on build plate only for the base. Tree supports are easier to remove. For asembly use 2 M3x10 bolts.
Topp C20 Ingranaggio centrale L'ingranaggio che si rompe sempre! per il montaggio non necessita di alcuna modifica
Wall bracket for TP-Link Tapo C200C You will need the self tapping screw provided for the camera mount and additional screw and wall anchor for the wall mount
Update 2024-12-17 Added multiple angles (4) Added marks for where the cable will go to simplify selection of version The camera blind sector is in the direction of the cable Tapo C200 90 degree mount - stronger Simple mount for TP-Link…
Dyson DC08 and DC20 Handle. This is a reupload of the original “Griff_V1.11.stl” model by Murkur11 which I found on Thingiverse. I haven't actually make any changes except for bringing the original file into Blender to fix the “Error 202…
I needed a way to mount my C200 on my Ender 5 Pro and couldn't find existing models that would work, so I modified an existing design to be suitable. I also created a new bottom part to mount on 2020 rails with M5 screws with drop in…
See the FilamATrix Github for additional info and other needed modded parts (includes parts to support the EBB SB2209 USB board). See the EBB SB2209 USB GitHub for additional info and other needed modded parts if not using the FilamATrix…
Multiple holes for easy Mounting. Works upside down. Credit: Remix of Model on OnShape by Stephen
For this camera: https://www.amazon.com/TP-Link-Tapo-Wireless-Security-C200/dp/B0829KDY9X?th=1 Or this one: https://www.amazon.com/dp/B09YL7JPXY?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 Uses the 4 screws on the front-left of your MK4…
A dustcover for the keyboard of your Commodore. Comes in different flavours, with the chickenlips-logo and as a blank cover. Also in one piece or splitted in two parts for the more standard-sized 3d-printer. Stp-file is added. The…
Ah, the tangled web of the audio interface! We've all been there, wrestling with cables like some sort of octopus in a tech-induced wrestling match. It's a constant battle between a clean workspace and the siren call of sweet, sweet…
I made this model because I couldn't find andy clamp style mounts for my C200 IP Cam, in the hope that it wouldn't wobble as much as a top/wall mount. The only things I could find were wallmounts or smaller clamps for the c100, so I tried…
Not much to say here, battery cover for your Renpho Smart Scale Model ES-C20M. Print Settings: 0.08mm Layer Height Thought I could get a little more clarity on the text but probably wouldn't change anything going with 0.2mm 15% 3D…
This set of 3D printable accessories is designed to fit the following Clipsal C2000 Series light switch covers : C2031VH – Single switch cover C2032VH – Double switch cover C2033VH – Triple switch cover These models have been designed to…
A privacy screen that can be put over a Tapo C200 camera, so it is clear to everyone in the room that the camera is not recording and is not in use. I made the screen so people that rent/use my house can be guaranteed the the camera is…
Side facing door mount for TP-Link Tapo C200/C210 cameras for Bambu Lab printers. Features : Door can be fully opened without needing to move the camera Camera angled slightly down at print bed to better see first layer squish Adjustable…
Hello, Here is small and easy project of Behringer U-Phoria UMC202HD mount. You can put your Audio IF under your table and… stable. In my case printed with PLA.
Cover for the 9pin Joystick ports on the C64. Could glue in bit of antistatic foam for tighter fit if needed. I tested this on a C64 breadbin and the Ultimate64. Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .20 Infill:…
This is a mount for the Tapo C200. I had almost no space between my cabinet door and my P1P, so I made a quick and easy compact mount for my Tapo C200. If you want to hang the mount upside down, you need to use the 'longer' version of…
I would be very happy about a Make, Like or Share! Happy printing!
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
3D Printed TPU retaining clip for 6-pin tag connect debug probe. Clip to temporarily hold a TC2030 -NL (“No Legs”) cable in place on a PCB.
Seat button from Mercedes C200 Estate Avantgarde 2005
I needed a panel for my 10" rack, I decided to combine my USG and MC220L. They fit perfectly, but you can add zip tie or double tape for more security. It's a long print, almost 10 hours ! Print instructions Print in PETG or PLA.
Xiaomi Smart Camera C200 mount tool. VERSION 2 No support desigh with all nedded included to be print :) Will be nice who can donate :) for my filaments :) YHANKS! https://www.buymeacoffee.com/stoykoly
We use the cheap Tapo C200 camera to supervise the sleep of our baby. It has good IR capabilities and can be turned around. As I didn't want this to make a permanent installation, I created this arm to mount the Tapo mounting plate on a…
I took the original model and extended the screw 2mm longer. fits just as well with more threads to bite with.
I saw the original mount from Thingiverse but for the ender 5 pro i found that the camera could not look down on the print bed. i took the file into TinkerCad and modified the incline, Now it sits at 15 degrees and the camera is tilted…
This file is made to mount a TAPO C200 camera in the front right corner of the enclosure For assembly you need: 2 M3x12 countersunk screws; 1 M3X12 screw; 3 m3n nuts (see images)
UPDATED: 29Dec2024: Per request by @ThiDav_2532052 (Good suggestion, thank you) , I added a version with a raised handle to more easily get your fingers on it. This new version does not allow for stacking since the top of the cover is no…
Hi maker ! a V2, an improved version here : https://www.printables.com/fr/model/861491-skadis-cam-mount-v2-tapo-c200 This is a sakadis mount for device TAPO C200. (a decenty cam for low price) Print intruction : Layer 0.2 Support : Yes…
Beside parts from original battery plate/connector You will need: Soldering flux Solder Soldering iron Super glue Optional nail polish 2 M5x10 screws (check your spare parts bin, I used disc (from disk brake) mounting screws Detailed…
Summary Simple and quick-print ceiling or wall mount for Tapo Webcam. With countersunk holes. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same type of mount. Print Layer…
TP-Link Tapo C200 / C210 mount with flat side to mount on objects using velcro or glue. I remixed this part do attach the Tapo C200 on my cable surface mount box using velcro. Printed with support. Remix based on TP-Link Tapo C200 various…
Liked the design but wanted to have a way to hide & secure the power lead and have an additional screw hole to support the mount a bit more. Printer: Creality Ender 3 V3 SE Nozzle = 0.4 Quality = 0.2 ‘Standard’ Medium = Bambu Charcoal…
Stand with integrated cable management for optimal visibility of the print bed.
C19/C20 IEC mount for Rat Rig V-Core3 500mm. Designed to fit Uxcell brand C20 socket and rocker switch: C20 Panel Mount Plug Adapter AC 250V 16A 3 Pins IEC Inlet Module Plug Power Connector Socket Staight AC 20A/125V 22A/250V DPST 4 Pin 2…
This is a tool used for aligning the E-CVVT cover on certain Kia and Hyundai engines when reassembling, as well as installing the motor plug to the correct depth. this tool was created using careful measurements from the car, from the…
Need supports everywhere (but very small areas use supports). Probably wise to avoid PLA due to stability issues over time, PETG is better.
Modified original model to fit my crib better switched the camera orientation Supports needed.
Hi maker ! This is the V2 of my sakadis mount for device TAPO C200. (a decenty cam for low price) was here : https://www.printables.com/fr/model/453058-skadis after a year, I see that my first version of the support tends to bend with the…
Adjustable door mount to centrally mount TP-Link Tapo C200/C210 cameras for Bambu Lab printers. Mainly for the P1 due to the poor built-in camera (only 0.5 FPS), but fits the X1 too in case you wanted a different camera angle Features :…
Galileo 2 Remix with Pre-Extruder Gear Filament Sensor For the most up to date version of this mod please visit Github . Description: This is a remix of the Galileo 2 extruder by JaredC01, designed to integrate a pre-extruder gear…
Print "Part1.stl" twice Every other STL once. i connected everything by pressfitting and gluing. My printing settings: .2mm resolution no supports 15% Gyroid infill Printer: Ender-3 V3 KE
Did a repaint on a truck that I bought to move beehives around. With all the trim and other detail pieces off, I thought it was a perfect opportunity for a little extra customization. The font, as it turns out, doesn't exist anywhere.…
Original plate (probably abs) cracked in many places from chemical damage (wd-40 and brake cleaner) I found it under DCH-009 name on aliexpress. So it may fit many more folding ebikes. Printed in PETg, require supports, 3 walls 20%…
I've been experimenting with Fusion 360 and Gridfinity models, this is a new version from my first original model . This is a specialized mount designed to securely attach a Tapo C200 camera to the base of a Creality Ender 3 S1 Pro 3D…
