208 modeli
For my use case, I needed a stand with a steep angle to see the floor in one of my rooms. It fits really snug, so depending on your printer and settings you might have to experiment with the step file a bit.
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
🇬🇧 Here is a Tapo C200 camera mount for the Ikea Skadis panel. Printed in 0,2mm with 20% infill (The camera isn't heavy). The hooks need supports to print. Fusion 360 file included if you want to make changes. 🇫🇷 Voici un support de…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena jednego wariantu
I didn't want to use the screw that the original mount requires. My crib wall is ~19mm thick so I cut small chunk out of the original model such that the gap was ~20mm. While it makes the model less versatile, it is a little more…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This rackmount adapter is designed to mount the TP-Link OC200 controller in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
15 degree base for Tapo C200 camera or can be used whitout feet for a flat base. Supports needed on build plate only for the base. Tree supports are easier to remove. For asembly use 2 M3x10 bolts.
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this model because I couldn't find andy clamp style mounts for my C200 IP Cam, in the hope that it wouldn't wobble as much as a top/wall mount. The only things I could find were wallmounts or smaller clamps for the c100, so I tried…
Wydruk około 4,52 €–5,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I would be very happy about a Make, Like or Share! Happy printing!
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
We use the cheap Tapo C200 camera to supervise the sleep of our baby. It has good IR capabilities and can be turned around. As I didn't want this to make a permanent installation, I created this arm to mount the Tapo mounting plate on a…
Wydruk około 3,08 €–3,76 € nettoWstępna wycena jednego wariantu
A simple stand or wall mount for Camera Tapo C200 & C210. The stand is available in several height variants (if you need a different one, let me know and I will add it).
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
Tp-Link camera (C200, C210, etc.) mount for Prusa Enclosure The camera can be mounted on the right side of the Prusa Enclosure using the original camera mount holes. Simply place the camera on the mount and rotate it clockwise. This…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Very simple wall mount for the remote AC200 Meliconi. Here is the remote: https://amzn.eu/d/5c9Hx9s I never found one for this model of remote, and I create this with 2 holes for M4 screws.
Wydruk około 3,07 €–3,76 € nettoWstępna wycena jednego wariantu
Simple stand to be used to see whole floor in kitchen, mainly to see what our dogs are doing. Ready to be printed. Used with PLA.
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
The Psion MC series has two expansion slots at the back, mine came with two expansion ports, other owners have no expansion ports or covers. This design contains a “Full Expansion” model which fills the entire slot, and an “Empty…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
Update 2026 : Added v2 mount with minor fixes Update 2024 : Added M12 screw with hex head ---------------------------- I've designed this support for Tapo camera C200 / C210 / C220 to be mounted on various baby cribs. Print specs: 0.2…
🙌 Show Some Love If this works for you, please drop a Like and post a Make! It really helps the model get seen. Feel free to remix it to your heart's content. I designed this for a perfectly tight fit. It features custom cutouts on the…
Wall Support / Mount for Tapo C200 C210 C211 C220 C225 TC70 TC71 WIFI Security Camera Compact upside down wall hanger wich uses original Tapo support (replacement available in the files) 8 holes = 4 positions (set the origin of the cam)…
I would be very happy about a Make, Like or Share! Happy printing!
With this design you can mount your TP-link ER605 and OC200 the proper way. You wil also need the Ubiquiti Networks ER-RMKIT. I used M3 10mm screws to screw the printed parts together.
TP-Link Tapo C200 is a nice IP camera from TP-link. This is a bracket allowing it to wall mount in upright or downright position.
UPDATE 24 Apr 2023 : I've added a (slightly larger) version for the TP-Link Tapo C225 camera - I don't have this camera myself, but thanks go out to fellow Thingiverse user @phagosome who has printed it and confirmed that it works. The…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
TP-Link Tapo Camera Inverted Mount This is a remix / mashup of Kadows' upside-down Tapo camera stand and Cewo's Tapo base (https://www.printables.com/model/377139-tapo-base-c210). Design I printed the orignal but found that the stand was…
I did a quick search and found this g-clamp that would suite my needs perfectly, so I modified the body of the clamp to take my Tapo C200 wall mount. If you want to use it, download the files here. Also download my Tapy C200 mount here .…
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link OC200 Omada Cloud Controller side-by-side with a TP-Link TL-SG1005P 5-port PoE switch. Parts Required This adapter is split into two pieces so that it fits…
how to use Use a M4 screw with a flat underside of the head. The head can be up to 4mm thick. how to print Print wings on the bottom. Enable snug supports. The only support will be in the middle. Put the mount horizontally on a mouse pad…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
This is a Highstand for my Tapo C210 Cam, this stand helps me to observe my 3D Printer with the best view in the right position. Feel free to give me feedback and share your prints, I appreciate every comment and download or even a small…
Simple stand for TAPO C200 cam that I've designed to make it stand taller. Change filament after the legs are printed to give it a two color look.
Original mount pad for Xiaomi smart cam C200
Printer: Creality Ender 2 Pro Filament: Kingroon Orange PLA Temperature: 205°C
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link ER7206 Omada VPN router side-by-side with a TP-Link OC200 Omada Cloud Controller. It includes a passthrough window for ease of cable routing from your WAN…
TP-Link TAPO C200 Wall/Ceiling mount
Make sure to print the arm strong enough.
this uses 2 screws to retain each module. it fits the standard 1u rack with little adjustment. i was able to print it on my ender 3. I used like 10 walls so that it was a solid part. it's printed in two parts to fit an ender 3. you will…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
Tip: I attached the helmet with soft double-sided tape to ensure a better helmet fit. And i use two camera riser Print with supports! I used 1kg of PLA in army green
My wall mount broke and i needed a replacement, so i designed this. Its easy to print, just enable bridging and print. I recommend using more perimeters for a more stable result. Took me 23 minutes to print on my Prusa MK3S with 4…
A 6-inch Rack Mount for the TP-Link SG1005P | SG105 | OC200 series. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print…
Flexible Halterung für die TP-Link Tapo c200 Kamera. Die zwei Teile können in der Höhe flexibel zusammen geschraubt werden. Für einen stabileren Halt kann der Fuß nochmal von hinten angeschraubt werden.
Enhance your Tapo C200 camera setup with this custom-designed stand. Made to be 3D printed flat without the need for supports, it’s easy and efficient to produce. This stand improves the camera’s field of view by allowing additional…
Soporte en 25º para Camara tapo C200 Video: https://youtu.be/hS_2T3ddfM0
Summary Simple and quick-to-print corner mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same…
Wanted to use a cheap indoor home automation PTZ camera to ‘spy’ on our new puppy. Most of the surfaces nearby were too close and too high, so quickly designed and printed this angle mount to all the camera to be mounted at an angle so we…
I wanted to use the space between the stock cup holders to place a slot sized for a folded Motorola Razr+
A swing arm adjustable mount for the Tapo C200 camera. I use this camera to remotely monitor my prints and the adjustable mount is handy if you need to move the camera away to access your printer. Additional parts required: 4x M4x30…
remix from 6.5 inch rack i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.
I needed a mount for the Tapo C200 that could be applied to the ceiling with adhesive. So here it is. Printed in PETG, using IKEA ALFTA adhesive.
Remix from misterT(thanks!). I added a hole in the middle to save time & filament. The angle is about 15°. Original text: Simple speaker stand for the desk. Raises the front of the speaker by about 25 mm. I added some holes on the bottom…
Wall bracket for TP-Link Tapo C200C You will need the self tapping screw provided for the camera mount and additional screw and wall anchor for the wall mount
Update 2024-12-17 Added multiple angles (4) Added marks for where the cable will go to simplify selection of version The camera blind sector is in the direction of the cable Tapo C200 90 degree mount - stronger Simple mount for TP-Link…
I needed a way to mount my C200 on my Ender 5 Pro and couldn't find existing models that would work, so I modified an existing design to be suitable. I also created a new bottom part to mount on 2020 rails with M5 screws with drop in…
Multiple holes for easy Mounting. Works upside down. Credit: Remix of Model on OnShape by Stephen
For this camera: https://www.amazon.com/TP-Link-Tapo-Wireless-Security-C200/dp/B0829KDY9X?th=1 Or this one: https://www.amazon.com/dp/B09YL7JPXY?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 Uses the 4 screws on the front-left of your MK4…
This set of 3D printable accessories is designed to fit the following Clipsal C2000 Series light switch covers : C2031VH – Single switch cover C2032VH – Double switch cover C2033VH – Triple switch cover These models have been designed to…
A privacy screen that can be put over a Tapo C200 camera, so it is clear to everyone in the room that the camera is not recording and is not in use. I made the screen so people that rent/use my house can be guaranteed the the camera is…
Side facing door mount for TP-Link Tapo C200/C210 cameras for Bambu Lab printers. Features : Door can be fully opened without needing to move the camera Camera angled slightly down at print bed to better see first layer squish Adjustable…
This is a mount for the Tapo C200. I had almost no space between my cabinet door and my P1P, so I made a quick and easy compact mount for my Tapo C200. If you want to hang the mount upside down, you need to use the 'longer' version of…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Seat button from Mercedes C200 Estate Avantgarde 2005
Ceiling mount for tapo camera.
I needed a panel for my 10" rack, I decided to combine my USG and MC220L. They fit perfectly, but you can add zip tie or double tape for more security. It's a long print, almost 10 hours ! Print instructions Print in PETG or PLA.
Xiaomi Smart Camera C200 mount tool. VERSION 2 No support desigh with all nedded included to be print :) Will be nice who can donate :) for my filaments :) YHANKS! https://www.buymeacoffee.com/stoykoly
I took the original model and extended the screw 2mm longer. fits just as well with more threads to bite with.
I saw the original mount from Thingiverse but for the ender 5 pro i found that the camera could not look down on the print bed. i took the file into TinkerCad and modified the incline, Now it sits at 15 degrees and the camera is tilted…
This file is made to mount a TAPO C200 camera in the front right corner of the enclosure For assembly you need: 2 M3x12 countersunk screws; 1 M3X12 screw; 3 m3n nuts (see images)
Hi maker ! a V2, an improved version here : https://www.printables.com/fr/model/861491-skadis-cam-mount-v2-tapo-c200 This is a sakadis mount for device TAPO C200. (a decenty cam for low price) Print intruction : Layer 0.2 Support : Yes…
Summary Simple and quick-print ceiling or wall mount for Tapo Webcam. With countersunk holes. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same type of mount. Print Layer…
TP-Link Tapo C200 / C210 mount with flat side to mount on objects using velcro or glue. I remixed this part do attach the Tapo C200 on my cable surface mount box using velcro. Printed with support. Remix based on TP-Link Tapo C200 various…
Liked the design but wanted to have a way to hide & secure the power lead and have an additional screw hole to support the mount a bit more. Printer: Creality Ender 3 V3 SE Nozzle = 0.4 Quality = 0.2 ‘Standard’ Medium = Bambu Charcoal…
Stand with integrated cable management for optimal visibility of the print bed.
This is a tool used for aligning the E-CVVT cover on certain Kia and Hyundai engines when reassembling, as well as installing the motor plug to the correct depth. this tool was created using careful measurements from the car, from the…
Need supports everywhere (but very small areas use supports). Probably wise to avoid PLA due to stability issues over time, PETG is better.
Modified original model to fit my crib better switched the camera orientation Supports needed.
Hi maker ! This is the V2 of my sakadis mount for device TAPO C200. (a decenty cam for low price) was here : https://www.printables.com/fr/model/453058-skadis after a year, I see that my first version of the support tends to bend with the…
Adjustable door mount to centrally mount TP-Link Tapo C200/C210 cameras for Bambu Lab printers. Mainly for the P1 due to the poor built-in camera (only 0.5 FPS), but fits the X1 too in case you wanted a different camera angle Features :…
I've been experimenting with Fusion 360 and Gridfinity models, this is a new version from my first original model . This is a specialized mount designed to securely attach a Tapo C200 camera to the base of a Creality Ender 3 S1 Pro 3D…
This is my remix of this model, which was originally designed to combine the Xiaomi Mi Computer Monitor Light Bar with the Logitech Streamcam. While the original model was excellent, I needed a solution tailored for the Anker PowerConf…
Hier seht ihr heute ein 3D Model des Kamerahalters der Nooie Außenkamera. Dieser ist in 3 Varianten verfügbar. Original, verbessert und optimiert, mit Grundplatte. Für die Kopie kann ganz einfach eine M2 Schraube verwendet werde. Für die…
A mount for a Tapo C200/C210 (and possibly other Tapo products) that connects to the excellent Flexible & Sturdy Phone arm by @FunkyArt_274361 https://www.printables.com/model/647794-flexible-sturdy-phone-arm-100-printed
A bracket to hang your Tapo C200 or C210 camera around an object or use the built in “flap” to attach it to a thin flange. Camera sits at a 55 degree angle to cover full floor area. The built in screw (optional) can be used to stabilize…
I created this adapter for mounting my tp-link Omada Controller OC200 in a server rack. The controller simply snaps into the printed frame without any additional screws or other fixture. For mounting small parts inside a 19'' rack I use…
Just a small helper for raising the Anker C200 Webcam slightly higher to avoid the cam from obscuring the display when using monitors with thin bezels. Prints easily without supports (see pictures for print orientation).
Should be able to fit the TP-Link Tapo C200, C201, C210, C220, C230, TC70, TC72, TC74 cameras Model remixed from Svenskerfuld's model from Thingiverse Printing Instructions Printed with 4 line count wall thickness, 40% infill & tree…
Holder for IKEA BESTA and PAX to attach a TAPO C200. I use the camera myself to look at my MINI+ IKEA PAX partlist 2x screw (100325) IKEA BESTA partlist 2x screw (113287)
A half-width (9.5") rack mount for TP-Link OC200 Omada controller. Mount the controller using two M5 bolts.
This is a 2040 extrusion mount adapter for Tapo smart cameras including C200, C210, C211, C220, C225, TC70, and TC71 . 🔹 Designed to fit 2040 aluminum profiles – tested on Anycubic Kobra 2 Neo . 🔹 Non-adjustable – simple and sturdy mount.…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on…
TAPO C200 mount for Original Prusa Enclosure. I created left and right option. I added also version “classic”, which mean just the place for mouting the holder for camera with original holder. AIO version, which means, that you need only…
Camera mount for Tapo C200 , C210 cameras and alike. THe original inverted mounting hardware is necessary to screw in the inverted base for the camera in the mount. The file includes a small hook which needs to be printed twice , and laid…
No screws needed. Print it with: 1. 4 walls 2. 4 tops 3. 4 bottoms 4. 30% infill
simple support with screw for anker c200 webcam
On my last run i had it just in a corner shelf, but i had the Problem the cam couldnt be turned enough downwards. After looking around and not finding one that fits how i need it to fit, i designed my own Model. It is intended to be…
I've wanted to protect my camera against small water droplets and dust, so I create this support. It is installed on a semi-outdoor area. The camera is fixed with its original support, I've used 2 brass inserts for it.
Tapo C200 compact stand Small footprint Collects the cable to make the stand more stable. Camera twist on to fix it to the stand Printing Print with bottom down Supports needed under the tabs. No support needed elsewhere. Example Strut…
A piece to mount Smart TP-Link Tapo C200 camera to the articulating arm system this remix is based on, the camera has pan and tilt so I didn't use the ball system, and opted for a simple bracket for more stability.
Base para la camara Tp Link Tapo c200, yo la imprimí en Petg y la uso para vigilar impresoras a la altura de la cama ya que puedo moverla 360grados. Facil de imprimir. 0,32 altura de capa, 10% infill la camara le puse 2 pequeñas tiras de…
Remix of the model to attach to a 16mm diameter pole (common in grow tents) with zip ties. I used 3 mm zip ties, but you can just make the holes bigger if you want to use 5mm or something.
Inverted camera mount designed for tapo 360 degree security cameras to allow mounting the camera inside on a live edge , door frame or any 90 degree corner. The mount is designed to be fixed in place with command strips for easy removal…
