Wyniki wyszukiwania: cam

Sortowanie

19 792 modeli

P
PrintablesAndrei

Bag Clip (PRINT IN PLACE CAM)

TRAILER An elegant bag clip designed to be printed in place as one piece with minimal supports. Once printed, the clip is freed into 3 hinged components. The design uses a specially designed cam to give the user a mechanical advantage and…

Pobrania
54 538
Polubienia
8399
Ocena
4,8
P
PrintablesSneaks

Dino-Clip Mechanical CAM Chip-Clip (PRINT-IN-PLACE)

🔥 NEW 2025 DESIGN AVAILABLE: The official, newly improved version of the Dino-Clip is now available for download on Etsy ! It features an updated Dinosaur design, improved strength, and flawless break-away support removal. The new…

Pobrania
34 750
Polubienia
7683
Ocena
4,94
P
PrintablesSneaks

Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…

Pobrania
27 813
Polubienia
6270
Ocena
4,9
P
Printablessquinn

Curvy Cam Lock Bag Clip

This print-in-place locking bag clip has been designed so that it can be printed without supports , has a fun curvy shape , uses an outward angled handle for easier one-handed use , and is a nice size at just under 6 cm when closed. I'd…

Pobrania
15 757
Polubienia
2990
Ocena
4,76
P
PrintablesCarter

Pi4 Case + FanCover w/Camera Slot

Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…

Pobrania
14 849
Polubienia
3575
Ocena
4,86
P
Printablesbkgoodman

ESP32-CAM Case

Has cutouts for illumination LED and camera, as well as buttons on the side for the two buttons on-board.

Pobrania
14 401
Polubienia
650
Ocena
4,7
P
Printablesmkoistinen

Flexi-Arm Camera Mount

I needed a method of connecting a "webcam" to my printer for remote monitoring from around the house via Octoprint. So, this comes in a couple pieces: A connector that snaps to the 30x30 extrusion frame (Y-axis on Prusa, and possibly…

Pobrania
5710
Polubienia
867
Ocena
4,67
P
PrintablesJSund

Camera mount for Prusa i3 MK3/MK3S

Camera mount that attaches to the aluminium extrusion of the frame of the Prusa i3 MK3/MK3S. The mount should fit any webcam with a 1/4" tripod mount by using a 1/4"-20 screw. The clip might interfere with the Y carriage bearing if…

Pobrania
5268
Polubienia
640
Ocena
4,75
P
PrintablesTom Vít

Logitech StreamCam Privacy Cover V2 (NEW)

Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…

Pobrania
3450
Polubienia
163
Ocena
4,73
P
PrintablesPeter Farell

Nativity Camel

A camel I made for use in a nativity scene. Check out the wise men. The Three Magi / Wise Men by Peter Farell | Download free STL model | Printables.com

Pobrania
3054
Polubienia
380
Ocena
5
P
Printablesoliverlopez

Action Camera Mount Base (GoPro-style, import this into your project)

This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…

Pobrania
3012
Polubienia
188
Ocena
5
P
Printablesuamo

Laptop Camera Cover

Simple sliding cover for your laptop camera. Use thin double-sided tape to attach.

Pobrania
2888
Polubienia
524
Ocena
4,74
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Pobrania
2669
Polubienia
521
Ocena
4,82
P
Printablesprntmkr

Mobile Phone Camping Light - Simple but clever

Intro A simple cap that changes your mobile phone (or any other LED torch) into a CAMPING LIGHT . The design was inspired by Japanese paper lamps . The cap was designed as simple as possible , so it may be used in the most flexible way.…

Pobrania
2450
Polubienia
1418
Ocena
4,92
P
PrintablesVegatype

Vega 4x5 View Camera

This is a remix of The Standard 4x5 from Standard Cameras ( https://standardcameras.com ) and has been shared with permission from the owner Drew Nikonowicz ( https://nikonowicz.com ). The bellows and ground glass needed for the camera…

Pobrania
2308
Polubienia
440
Ocena
4,85
P
Printableslufa

1/4 inch nuts and bolts for camera and tripod

1/4 zoll Schrauben und Muttern für Kameras und Stative. Die langen Schrauben können mit FreeCAD auf die benötigte Länge gekürzt werden.

Pobrania
2189
Polubienia
325
Ocena
4,64
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount

Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…

Pobrania
2107
Polubienia
685
Ocena
4,81
P
PrintablesDaniel BP

Raspberry Pi Camera Stand

Raspberry Pi Camera Stand Because this camera has a large focal distance and fixing the device in the printer frame does not provide the best image. This stand allows other uses to the camera. Features Compatible with the official Pi…

Pobrania
1562
Polubienia
148
Ocena
4,94
P
Printablesdoroteo

MEDIUM FORMAT CAMERA - VERSION 2

I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…

Pobrania
1444
Polubienia
460
Ocena
5
P
PrintablesDvG3DAtelier

Prusa Core One Buddy3D Camera Angle Mod – Better View, No Collision, Round Magnet Mount

I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…

Pobrania
1376
Polubienia
415
Ocena
4,99
P
PrintablesSerial-Comma

Horizontal Chest Mount for Insta360 Cameras

Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…

Pobrania
1352
Polubienia
124
Ocena
5
P
PrintablesPiotr Ciba

Orang Scrw - Lightweight Camping Anchor

I recreated the design of well known [BRAND NAME] plastic anchors, making one side of the thread flat for easier printing. I used 100% infill to maximize strength, but you might achieve sufficient durability with a lower infill setting.…

Pobrania
1339
Polubienia
462
Ocena
5
P
PrintablesPomi

Logitech C270 Webcam Cover Replacement (with GoPro Mount)

This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…

Pobrania
1224
Polubienia
187
Ocena
4,69
P
Printablesschwa

iMac Pro Continuity Camera Mount

A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…

Pobrania
1182
Polubienia
71
Ocena
5
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…

Pobrania
1179
Polubienia
287
Ocena
4,97
P
PrintablesMakePro

Apple iPhone continuity camera mobile holder for Dell monitor

If you like my work please support me. :-) Buy me coffee at ko-fi.

Pobrania
1093
Polubienia
71
Ocena
5
P
PrintablesKatz Creates

Camera Lens Mounted Teleprompter

UPDATE: Thanks to community feedback I have added additional sized inserts for different phones (so there's more of a chance of a snug fit for your phone, but a looser fit is okay long as it doesn't fall out!) as well as a version with…

Pobrania
1052
Polubienia
305
Ocena
4,75
P
Printablesschwa

MacBook Pro Continuity Camera Mount

A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an MacBook Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…

Pobrania
1047
Polubienia
85
Ocena
4,8
P
PrintablesDIY Machines

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone.

3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…

Pobrania
1007
Polubienia
214
Ocena
5
P
PrintablesTijmen

ESP32 CAM Mount

Small and quick to print camera mount for the ESP32 Cam. This mount uses the pins of the esp board to hold the board. The pinholes in the corners are snugger, to secure the board in place. Additionally, the 5v and gnd are left open for…

Pobrania
1003
Polubienia
176
Ocena
4,79
P
PrintablesNorthStrider

Slide-in Wyze Cam Prusa Mount

1/5/2020 - Added 8mm channel version. Added a version to clip onto the BEAR upgrade extrusion. 9/11/2020 - Added Right Hand version per comment request. (Works for MK3S and the Mini.) I decide to do my own spin on Gabe's awesome cam…

Pobrania
995
Polubienia
174
Ocena
4,9
P
Printables3DM-DeMeern

Hooks for Camper / caravan awning

Redesigned the hook so it would print better then his version. Now you can you use it also for hanging towels. hook for awning rails hook for tent rail In addition to this, see also:…

Pobrania
982
Polubienia
167
Ocena
5
P
Printablesburtworks

Hot Shoe / Cold Shoe Mount for Webcam

This is a Hot Shoe / Cold shoe mount to mount a webcam on top of a camera. ¼-20 thread tripod mount. I used this to mount my webcam for Octoprint on top of my DSLR I'm using for Octolapse within Octoprint. It's very light duty even when…

Pobrania
942
Polubienia
86
Ocena
4,75
P
PrintablesAtle Berg

Raspberry Pi Camera Stand

Just a quick camera enclosure / stand I whipped up for my Raspberry Pi. Be aware: this enclosure does not fit the v1.3 camera! Print instructions Category: Camera Summary Just a quick camera enclosure / stand I whipped up for my Raspberry…

Pobrania
925
Polubienia
96
Ocena
4,9
P
PrintablesIan Foulds

Mason Jar Mosquito Trap (other camping pests too)

To make the trap you just print the lid and fill the jar with sugar water and yeast. The fermentation will generate CO2 which attracts the mosquitos they fly in the cone and get trapped. Turns out it attracts other pests like bald faced…

Pobrania
899
Polubienia
457
Ocena
4,5
P
Printablesebeeche

Prusa MK4 camera mount for Logitech C270/C310

Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…

Pobrania
891
Polubienia
203
Ocena
4,76
P
PrintablesLilifee

Raspberry pi zero webcam (HQ camera)

Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…

Pobrania
861
Polubienia
163
Ocena
4,75
P
PrintablesM1Designs

Camera Lens Cap 58mm

Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…

Pobrania
846
Polubienia
52
Ocena
4,5
P
PrintablesMaxx

WiFi Camera Wall Mount (Tapo C210)

I made a wall mount for Tapo C210 WiFi camera. It should work with other Tapo cameras because I think they have the same mount. Made it in 4 parts for easy printing. Easy to put together, glue recommended. There are holes for screws on…

Pobrania
845
Polubienia
170
Ocena
4,88
P
PrintablesAlgernon

Airbrush stencil ST-CAM002-luftwaffe-WWII-spots-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Pobrania
822
Polubienia
134
Ocena
5
P
PrintablesMaxTechTV

Snap fit case/box for Raspberry Pi Camera Module v2

This is a lightweight and easy to print case I designed for the Raspberry Pi Camera Module 2. It snaps together and can be separated again. It has a GoPro compatible mount. No supports are needed for the print. It has successfully been…

Pobrania
816
Polubienia
39
Ocena
5
P
PrintablesAlgernon

Airbrush stencil ST-CAM001-luftwaffe-WWII-shingles-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Pobrania
812
Polubienia
157
Ocena
5
P
Printablessiamigo

Logitech C920 webcam privacy cover

Didn't seem to find a cover for the C920 so made one with inspiration from another user. Recommend using the improved version of the cover which fits better to the camera. Logitech C920 privacy cover improved by siamigo | Download free…

Pobrania
808
Polubienia
76
Ocena
4,77
P
Printables3D KIMBA

CMF RIG PRO – Magnetic Camera Cage for CMF Phone 2 PRO

After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…

Pobrania
786
Polubienia
708
Ocena
5
P
Printablesamazing

Support Rails for Silhouette Cameo 4 Cutting Mat

I designed one support rail with an edge/guide at the left side (for proper alignment of the cutting mat) and a generic rail without edges to be used in the middle and at right side. Each rail comes with two parts for easy and stable…

Pobrania
666
Polubienia
109
Ocena
5
P
Printableskitlaan

Camera Lens Cap Holder

A (parametric) buckle that you can attach to your camera strap, which lets you (hopefully) stop losing your lens cap. The STL is sized for a 58mm lens cap, and a ~40mm strap width. The printing layers make for a great friction catch for…

Pobrania
656
Polubienia
144
Ocena
3
P
PrintablesFotone

Raspberry Pi Camera Mount for Prusa MK3 S

Ho disegnato un supporto, leggerissimo, da collegare ad incastro sull'asse Z per la Raspberry Pi camera e la stampante Prusa MK3S e credo anche MK3. È formato da tre pezzi e si stampano tutti senza supporti in orizzontale. La Pi camera è…

Pobrania
604
Polubienia
86
Ocena
4,86
P
Printablessumit_basra

MagSafe Charger iPhone Holder for Continuity Camera in macOS Ventura and iOS 16

I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…

Pobrania
599
Polubienia
188
Ocena
4,67
P
PrintablesColin Alston

Simple Raspberry Pi HQ camera box

This is a very simple box for the new Raspberry Pi HQ camera module as I wasn't comfortable having a bare PCB flapping around. To install the module carefully remove the rear focus adjustment ring. Screw the module down into the case with…

Pobrania
594
Polubienia
39
Ocena
4,75
P
PrintablesInnesPort

Focus Knob for Wyze Cam V3

The Wyze Cam V3 is an excellent, affordable little camera to monitor your printer, but it has one fatal flaw... focus distance! The camera comes with a fixed focus that's approximately 3 feet to infinity, which makes monitoring 3D prints…

Pobrania
571
Polubienia
96
Ocena
4,88
P
Printableszuberio

Wyze Cam v3 Window Mount - Upside Down Gravity Hold

Quick and easy print (~1hr), no supports. I designed this with the mindset that the Wyze Cam v3 has a nice ledge along the bottom that's perfect for ‘locking’ the camera in place if one installs it upside down. I printed the first 1mm in…

Pobrania
568
Polubienia
133
Ocena
5
P
Printablesfoorschtbar

Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4

A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…

Pobrania
555
Polubienia
111
Ocena
4,89
P
PrintablesEnijat

Camera lens lid with 3D printed springs

This is a fully working, 3D printable camera lens lid for a lens with a 54mm diameter. (If you want another diameter, either remix it yourself (for small changes like 56mm diameter just upsizing the model appropriately seems to work) or…

Pobrania
551
Polubienia
311
Ocena
5
P
PrintablesDangeMask

Bag Clip (PRINT IN PLACE CAM) - Prusa MINI REMIX

Bag clip originaly from Andrei, remixed (prepared for slicing for i3) by CP43D. I used CP43D's 3MF file, but changed settings for Prusa MINI printer. Print instructions Tested on 0.15mm layer, 15% infill. Be sure to set supports to "from…

Pobrania
532
Polubienia
63
Ocena
4,91
P
Printablesgebirgshang

Camper T1 kit card

Print 0.2mm layer height. No supports are needed. 10% infill.

Pobrania
532
Polubienia
121
Ocena
5
P
PrintablesFrank Deschner

Prusa Camera Mount

This is an original design. This is for Prusa. This is easy to print. This is for OctoPrint. This is smart #3dp design and 100% printable. </b> #3dp Update: 2nd Gen Mount is out! Improved stability, fit and cable guide. If you like what…

Pobrania
521
Polubienia
140
Ocena
4,8
P
PrintablesAlgernon

Airbrush stencil ST-CAM004-pixelated-modern-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Pobrania
503
Polubienia
121
Ocena
5
P
Printableshjzl16

Webcam holder on BenQ Screenbar

This is a small holder to fix webcam (or any other device with standard 1/4" tripod screw) atop of a BenQ ScreenBar. The webcam orientation is adjustable. No fastener needed.

Pobrania
444
Polubienia
48
Ocena
4,6
P
PrintablesKid Printer

NVG camera mount for Tactical FAST helmet

Use the screw that came with the camera case. Push the back of the print into the slot and push the front firmly until it clicks and is securely in place. Use the lowest possible layer height and a wall count of 4 for best results (with…

Pobrania
443
Polubienia
33
Ocena
3

CANOPY - BetaFPV Meteor75 Pro Runcam TBS nano 32 VTX - CANOPY

I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…

Pobrania
442
Polubienia
40
Ocena
5
P
PrintablesTJL

Updated Generic Camera Mount for SV06 & SV06+

This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…

Pobrania
441
Polubienia
75
Ocena
5
P
Printablesfuzzms

Replacement lid for Moccamaster coffee maker

This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…

Pobrania
432
Polubienia
26
Ocena
4
P
PrintablesTomáš Kostiha

TrueLife NannyCam H32 - holder

Simple holder for the camera TrueLife NannyCam H32. Base and holder are separately and ready to create your own holder. Both parts are conneced togetther with two M3x12 screws and two M3 nuts. Supports are required for a base only. Screw…

Pobrania
423
Polubienia
27
Ocena
4,62
P
Printableschris

Camera Case for ESP32-CAM and the Core One (v2)

Unfortunately, this case https://www.printables.com/model/1193119-esp32-camera-mod-for-core-one was too small for my ESP32-CAM (AI-Thinker and clones). So I modeled a similar one from scratch. Update, March 9th 2025: Created a new version…

Pobrania
403
Polubienia
132
Ocena
4,75
P
PrintablesRyan Millar

Wyze Camera Mount for Prusa I3 MK3S+

This is a remix to an existing camera mount. The remix adjusts the camera height and spacing from the print bed for better alignment with the first layer and to allow clearance for side drawers (the side drawers I've printed are:…

Pobrania
402
Polubienia
80
Ocena
4,79
P
Printablesbr4in

Raspberry Pi HQ Camera Mount for the Articulating Camera Mount

This is an adaptation of the camera back from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 , inspired by and simplified from the Raspberry Pi Hi Quality Camera Case Adapter . I've adjusted the back plate of the…

Pobrania
400
Polubienia
53
Ocena
5
P
Printablesrudfaden

Raspberry Pi HQ Camera Case

I liked the mounting system created by Sneaks. But it did not fit my Raspberry HQ camera. i made this case to fit on the arm with the same ball system as the original case. I printed it in PETG. Its made to be a tighth fit with the…

Pobrania
397
Polubienia
58
Ocena
4,8
P
PrintablesJ4N

Lack enclosure Rasperry Camera HQ support

I've built an enclosure with an Ikea Lack. Recently I've baught a Raspberry Camera High Quality(the one with interchangeable lens. I created a mount, which can pivot in 2 directions. I've printed it without support. It requires: 1x m3…

Pobrania
385
Polubienia
54
Ocena
4,75
P
Printablesian123411

camera mount

camera mount hooks on to the side of the extrusion on the Prusa i3 mk3s I have a magnetic base on my camera so I have screwed the metal plate that came with it which holds it in place or it can just sit on top the last picture is the view…

Pobrania
381
Polubienia
57
Ocena
5
P
PrintablesHeikit

Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles

Can be fitted without dismantling the Prusa (see photos for various dovetail guides). The V2 version requires no pliers. Important: Layer height for printing 0.1 mm Use 2 M4x20 or M4x12 Screws to mount Kann ohne Demontage des Prusa…

Pobrania
374
Polubienia
58
Ocena
4,25
P
Printablesmweisshaupt

Drink holder camping chair Quechua Decathlon fully 3D printable

Print all 3 files with 100% infill and in a material that is suitable for outdoor use. E.g. PETG.

Pobrania
359
Polubienia
129
Ocena
0
P
PrintablesNDS RnD

Camera Protector for iPhone 13 Mini

The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…

Pobrania
344
Polubienia
24
Ocena
5
P
PrintablesTache

CAMLOCK Adapter for RIDGID Hose (OD 43.50 mm)

This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…

Pobrania
318
Polubienia
66
Ocena
5
P
PrintablesFabrizio

American Touring Motorcycle Gave One F**K Twin CamTimer Cover

Got the medallion by pwmodder 2017 on thingiverse, files here: https://www.thingiverse.com/thing:3740645 the cover was made for HD Twin Cam engines, test rode it one afternoon, did not melt down

Pobrania
313
Polubienia
31
Ocena
5
P
PrintablesKendall Unruh

Blink Mini Camera Mount for Ender 3 Max Neo

I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…

Pobrania
298
Polubienia
58
Ocena
5
P
PrintablesAxiongr

Camera Plate Wrench

You must put a pause(M600) at 3.80 layer height and insert a 5 euro cents coin. (Otherwise after printing finish isn't possible to insert the coin properly…!)

Pobrania
293
Polubienia
195
Ocena
5
P

Raspberry Pi Camera Holder Module 3 (CM3) (Adjustable)

WHAT THIS IS: I wanted a raspberry pi camera module 3 (or CM3) holder for my robot. Most models uploaded on printables were made for 3D printers, so I couldn't get a design to fit my robot as they were all supposed to be directly…

Pobrania
293
Polubienia
19
Ocena
5
P
Printablesdrew.brashler

RV Camper Shower Shampoo Holder

A simple bar to affix to the shower to hold your shampoo in your 5th wheel camper or RV shower. One of the downsides of a small shower in a camper is no space for your shampoo. I designed this to attach to your camper shower wall to hold…

Pobrania
285
Polubienia
83
Ocena
5
P
PrintablesFabian

ESP 32 Cam Case

Case with wall mount for ESP 32 Cam Bracket: https://www.prusaprinters.org/prints/31345-esp-32-cam-case-lampbracket

Pobrania
282
Polubienia
24
Ocena
4,5
P
PrintablesSorp2005

Raspberry Pi 3B+ CAM Rover with arm

This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…

Pobrania
277
Polubienia
67
Ocena
0
P
PrintablesTocxo

Articulated Security Camera

This is a model with an intermediate detail adjusted to the size of this piece.It is inspired by the camera of 3dfiti . It is a fully articulated camera, its design has been based on a classic street camera. Asembly video on my ig reel .…

Pobrania
276
Polubienia
55
Ocena
0
P
Printables_Stacktrace

Reolink Argus3 Camera + Solar Panel mount for rain drain pipe

I wanted to mount the reolink Argus3 camera with it's corresponding solar panel on a 100mm drain pipe. I printed in PETG. Let's see how lang that is going to last in the sun. Material for camera mount: 1 x 20mm M6 screw 1 x M6 hex nut 2 x…

Pobrania
271
Polubienia
22
Ocena
0
P
Printablesdym801

Cache griffe flash - Camera Hot Shoe Cover

Cache griffe flash - Camera Hot Shoe Cover

Pobrania
267
Polubienia
12
Ocena
0
P
PrintablesBetschler

Housing for the Raspberry Pi standard camera module v2.1 with integrated focus adjustment

The goal was to enable an easy change of focus while using the exisiting mount system created by Sneaks

Pobrania
249
Polubienia
44
Ocena
5
P
PrintablesHeikit

Remix of Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles

Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles

Pobrania
241
Polubienia
45
Ocena
4,67
P
Printablesgimpelginster

Bird Watching Case for Raspberry Pi HQ Camera

MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…

Pobrania
239
Polubienia
55
Ocena
5
P
PrintablesSebastian

Motorized Camera Slider with WiFi (DSLR time-lapse)

The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…

Pobrania
238
Polubienia
333
Ocena
5
P
PrintablesBitScout

Lens cover for AUKEY webcam

New: v2, which is a lot more solid, doesn't catch on the lens bulge and only slides off sideways. Three versions of a simple webcam cover for the 1080p AUKEY webcam (the wide one, with microphones on each side). The cover slides easily…

Pobrania
229
Polubienia
16
Ocena
5
P
PrintablesUloPe

Voron 0.2 tophat corner camera mount

A mount to fix a 38x38 mm PCB camera into one of the corners of a Voron 0.2 tophat. The camera I used is an ELP 4K IMX317 170° Assembly I used 4 M2 self tapping screws to fix the camera to the mount and 2 M3x20 SHCS to attach the mount to…

Pobrania
225
Polubienia
44
Ocena
4,8
P
PrintablesShaun

Body Camera Phone Mount (attaches to shirt, lanyard or backpack)

Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…

Pobrania
220
Polubienia
36
Ocena
5
P
PrintablesBUDS3D

NEST CAM INDOOR/OUTDOOR DESK /SHELF MOUNT

GOOGLE NEST CAM DESK/TABLE/ SHELF ANY FLAT SURFACE MOUNT. CREATED THIS FOR MY BATTERY NEST CAM. TWO PIECE DESIGN, TOP SNAPS INTO BOTTOM FOR A TIGHT FIT, IF YOU LIKE YOU CAN ADD 2 DROPS OF SUPERGLUE FOR A PERMANENT FIT. LISTED ARE TRIED…

Pobrania
216
Polubienia
19
Ocena
5
P
Printablesconorlburns

Pi Camera Bedmount

This mount uses Zipties to mount the camera to the bed. This creates beautiful timelapses! I've used M3 screws from the spare parts bag of my prusa (I used a long screw to attach the swivel so it doesn't break)

Pobrania
211
Polubienia
26
Ocena
5
P

ESP32-CAM Mount for Prusa MINI (X-Axis stepper motor)

This is an enclosure to mount an ESP32-CAM on X-Axis stepper motor. LONG CAM CABLE NEEDED! (I used ov2640 with 75mm cable). Inspired by similar mounts for pi cams and customized for ESP32-CAM and Prusa Mini. Case is the same in both…

Pobrania
211
Polubienia
37
Ocena
5
P
PrintablesToby3D
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
198
Polubienia
87
Ocena
5
P
PrintablesSnipeX 3D

Mintion Beagle Cam Mount | Bambu Lab P1P Cam Mount

This is a mount for the Mintion Beagle Cam to mount it on your P1P. To slide the cam in place you have to put it upside down on a 45 degree angle into the Mount and twist the top in to secure it. Printing Parameters: Walls: 4 Layer hight:…

Pobrania
197
Polubienia
38
Ocena
0
P
PrintablesG3ox

Camper Door Stopper / Latch

This is a door stopper / latch designed as a replacement for a camper van (RV). This keeps the door open in windy conditions You have to print both files and attach the catch to the wall and the latch on the door. It is recommended to…

Pobrania
197
Polubienia
39
Ocena
5
P
PrintablesViridi

Vintage Camera Doodle

Hello there! I designed an extendable vintage camera. This is a print-in-place model that doesn't require support. It is my first try on modelling a model that has to disassemble itself into multiple components after printing. It is…

Pobrania
196
Polubienia
26
Ocena
0
P
PrintablesRobert Cook

insta360 x4 backpack camera mount

simple mount. please understand layer line weakness before printing. small frame may show on sides if full 360

Pobrania
195
Polubienia
45
Ocena
5
P
Printablessimonnelli

Tripod cam lock (fits some Manfrotto Tripods)

All the cam locks on my old Manfrotto 055PROB tripod broke. As the original spare part (R190,387) is absurdly expensive (needed six), I drew my own. Modified the original shape for easier printing and better durability. As the geometries…

Pobrania
193
Polubienia
27
Ocena
4,5
P
PrintablesGerald

MK4+MK4S ESP32 Cam Mount

Camera Mount for MK4(S) suitable for Part of MK4 "x-end-motor-R2.stl2" No support

Pobrania
192
Polubienia
59
Ocena
4,8