Wyniki wyszukiwania: canon

Sortowanie

1092 modeli

P
PrintablesFilmTeam

Canon body cap / cover for EF / EF-S

### UPDATE! Now the text is in correct horizontal orientation Hi, this is a cap/cover for Canon's camera body with mount ef / ef-s Print settings: Layer height: Any, I used 0,2mm Material: Any, I used PETG Supports: Yes, only on build…

Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
727
Polubienia
49
Ocena
4,75
P
PrintablesIng. Ákos

Canon hotshoe - Action camera mount (GoPro, Insta360,...)

Canon hotshoe - Action camera mount (GoPro, Insta360,...)

Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu

Pobrania
452
Polubienia
40
Ocena
5
P
Printableskevsparky

Canon Lens Back Cover

A rear lens cover for Canon Lenses. If printing on an FDM printer, the Canon logo should be on top. You may want some support material to support the rear side of the internal flat surface. 0.15 mm layer height is ideal. No support…

Wydruk około 1,59 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
315
Polubienia
57
Ocena
5
P
Printablesjoiseystud

Canon EF mount to T2 (M42x0.75mm) Adapter

This adapter allows you to connect an EF lens to a T2 interface that has M42x0.75 female threads. This is specifically designed to connect a Canon lens to telescope camera through a filter wheel box. The flange to flange dimension is…

Wydruk około 3,14 €–3,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
209
Polubienia
24
Ocena
0
P
Printablesby890 tom

Canon 80D 90D Hot Shoe Cover

Fully wrapped hotshoe cover, 0.15 ply height, PrusaSlicer slicing. No support required, slow printing speed. When pushing in the hot shoe, you will hear a "click" sound, indicating that it has been installed.

Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu

Pobrania
180
Polubienia
16
Ocena
5
P
PrintablesBM

Extra-wide lens hood Canon EW-73D alternative

The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…

Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu

Pobrania
170
Polubienia
12
Ocena
0
P
PrintablesTommo Byrne

Canon camera battery (LP-E17) charger base

Canon LP-E17 Battery Charger LC-E17E Base This base snugly fits to your canon battery charger LC-E17E, and provides clear slots for charged and dead batteries. You'll never get caught without a charged battery again! Simply store your…

Wydruk około 12,40 €–15,15 € nettoWstępna wycena jednego wariantu

Pobrania
113
Polubienia
29
Ocena
0
P
PrintablesCyclone-6

Easy Print PVS-14 to Canon EOS 58mm Adapter

This is an adapter to slave an ATN AN/PVS-14 with the Canon EF-S 18-55mm f/3.5-5.6 IS STM (typically included with the Rebel T7) and other Canon lenses. To assemble, remove rubber eyepiece shroud from the PVS-14 and place two halves of…

Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu

Pobrania
92
Polubienia
8
Ocena
0
P
PrintablesErwin

Canon LP-E17 battery "sleeve"

The STL file does not have the text on it. The gcode has (using prucaslicer).

Wydruk około 0,78 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
85
Polubienia
3
Ocena
5
P

Canon-FD lens mount cap

Simple Canon Fd mount cover cap to protect your lens mount. Works with interlocing lens mechanism.

Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu

Pobrania
80
Polubienia
8
Ocena
0
P
PrintablesGyoenastaader

Canon EOS-M Astromania short T2 adapter

This is a remix of a prior T2 adapter. I really needed the threaded portion of the T2 to allow for a filter. So I bought the following T2 adapter and used the inner ring and the T2 male end. There are three holes along the perimeter to…

Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu

Pobrania
72
Polubienia
7
Ocena
0
P
PrintablesStudio A26

Naval Canon 26 LB _18th Century

This is my first model of a Naval Canon made in and around thw 18th Century. I used reference images in order to make this, and this is my first attempt at doing so in Blender. I would have liked to put wooden textures on to the frames,…

Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu

Pobrania
60
Polubienia
5
Ocena
0
P
PrintablesSaSch

Cold Shoe Adapter/Stand Canon to Osmo Pocket

For a small video production with a telephoto lens on the Canon R (on a tripod), I needed an adapter for the DJI Osmo Pocket to be able to film the wide shot at the same time. I found a solution on Cults3D at User “ 3D-Designs” , which…

Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu

Pobrania
47
Polubienia
3
Ocena
5
P
Printableschvvkumar

Canon EF 100-400mm f/4.5-5.6L IS II USM Bahtinov mask

Bahtinov mask for Canon EF 100-400mm f/4.5-5.6L IS II USM

Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
46
Polubienia
3
Ocena
0
P
PrintablesDrak

Canon RF Camera Body Cap Cover - Drak

Protective body cap for Canon RF mount cameras. Designed to cover and protect the camera sensor and lens mount when no lens is attached A simple and practical accessory for storing, transporting, or protecting your Canon RF camera body…

Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
2
Ocena
5
P
Printableslars_butnotnils

Canon CP1500 Speaker Stand Mount

This bracket allows you to mount the Canon CP1500 photo printer on a standard speaker stand. It is designed to attach the CP1500 holder from Benjamin Kott to a 35mm speaker stand. In combination, the whole thing is then ideal for a photo…

Wydruk około 8,52 €–10,41 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesUncluesteve

Replacement Basket rod end for Canon 4000S

The original basket rewind button often gets knocked off the Canon 4000s Plotters, leading to it being lost or broken. A cost-effective replacement has been designed without the rewind feature, but with small tabs that fit into the…

Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesBM

Plantronics microphone ball jointed Canon hot shoe adapter

Remix to mount a microphone (Plantronics AUDIO 300E) on my Canon R5. Printed in PETG to get some flex, this hot shoe adapter allows for orientation adjustment of the microphone (balljoint).

Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesNominal Brand

Rear lens cap for Canon EOS EF and EF-S lenses

Whether the dog chewed your lens cap, or it fell off a cliff during that last hike, the solution is one print away. Recommendations: Print Material: PLA Infill Percent: 15% Layer height: .15 (a layer height greater than .15 will not work…

Pobrania
2466
Polubienia
495
Ocena
5
P
PrintablesJP

Canon EOS Hot Shoe Cover

Hot shoe cover designed to fit Canon EOS cameras perfectly. A variant better suited for Canon FD cameras can be found here . Print Settings Resolution: 0.1 mm Infill: 100%

Pobrania
2125
Polubienia
233
Ocena
5
P
Printablesthenickdude

Microscope adapter for 4x macro photography with Sony A, E/FE, Canon EF/EF-S, RF, M, Nikon F, Z, Fuji X, Leica L, M4/3, M42 cameras

This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…

Pobrania
1957
Polubienia
270
Ocena
5
P
PrintablesJohn Barton

Canon LP-E6 Battery Holders (More Sizes)

Added more sizes to Wojtek's LP-E6 battery holder. Should be able to print without any supports in the provided orientation.

Pobrania
1861
Polubienia
203
Ocena
4,92
P
PrintablesJP

Canon EF 50mm F1.8 STM Lens Hood

A lens hood for Canon EF 50mm f1.8 STM lenses. Can be used both as as hood and as a protective case. Print Settings Resolution: 0.1mm Infill: 100%

Pobrania
1519
Polubienia
212
Ocena
5
P
Printablessilviu

Canon EOS RF Rear Lens Cap

Overengineered rear lens cap for Canon EOS RF lenses. Missing the align notch and stopper. Print instructions Print .1 or 0.2 mm P.S. Donations welcome, my cat keeps chomping the filament.

Pobrania
1465
Polubienia
126
Ocena
4,91
P
Printablesthenickdude

Canon EF/EF-S lens mount

This is a printable model of the mount found on Canon EF/EF-S lenses, which you can use to design accessories like extension tubes or custom lenses. Print at 0.1mm layer height, in PETG (recommended) or another filament like PLA. This is…

Pobrania
1458
Polubienia
91
Ocena
4,67
P
Printablesthenickdude

Microscope adapter for 2x macro photography with Sony A, E/FE, Canon EF/EF-S, M, RF, Nikon F, Z, Fuji X, Fuji G, M4/3, Pentax M42 cameras

When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…

Pobrania
1225
Polubienia
300
Ocena
5
P
PrintablesGiwi

Canon Lens Hood 58mm

This is a Lens Hood for a 58 mm Canon EOS Lens. Suitable for a focal length from circa 18mm

Pobrania
1152
Polubienia
118
Ocena
4,91
P
PrintablesZiemniaczenka

M42 to Canon EF adapter

Proper clearance, lens orientation and flange focal distance. Tested with Helios 44M-4 and Beroflex 135mm F2.8.

Pobrania
979
Polubienia
58
Ocena
4,89
P
PrintablesDanielAlex

Star Wars TIE Defender (Canon/Legends Versions)

Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…

Pobrania
935
Polubienia
150
Ocena
5
P
Printablesthenickdude

Rear lens cap for Canon EF

Rear lens cap to suit Canon EF and EF-S lenses. Print Settings Supports: No Resolution: 0.2mm Infill: 100% Filament: Plasty Mladeč PLA Black Slicing settings: Perimeters: 2 Seam position: Random The cap has three internal flanges which…

Pobrania
918
Polubienia
82
Ocena
4,91
P
PrintablesElsni

Canon FD body cap

This is a printable body cap for FD mount Canon cameras, such as the T50, T70, T90, F1, A1, AE1 and others… I modeled this cap after an existing cap. The print is not quite so simple, as the guides for the bayonet catch have a slope. I…

Pobrania
858
Polubienia
38
Ocena
5
P
Printablesmoebio

T-ring T2 adaptors for Canon EOS for telescopes

T-ring adaptors for 2" and 1.25", should work on any telescope. The adaptor if of the EF type, it should work on any Canon EOS cameras.

Pobrania
854
Polubienia
63
Ocena
5
P
Printablescolinhalebrown

Canon EF Lens to Sony E-Mount Body

Adapts Canon EF/ EF-S lenses to Sony E-Mount bodies. That is all, no lock, no frills.

Pobrania
821
Polubienia
28
Ocena
0
P
PrintablesChrisE

Lens Cases for Canon EF-M / Canister Set

Update Feb25: Thanks for almost 300 downloads! Full Step Files available for Purchase from my Printables Store Here - perfect for alteration and customization. Free STL Files for 3D Printing below: Set of Modular Lens Cases, Protection…

Pobrania
771
Polubienia
198
Ocena
5
P
Printablesesox

Canon EF-S 18-55 Hood

This is a hood for Canon kit lens. Three models are included, rounded hood, petal hood and a base that you can use to design your own model. f3d file is included.

Pobrania
724
Polubienia
57
Ocena
4,67
P
PrintablesJohn Barton

Canon LP-E6 Battery Gridfinity Storage

A convenient way to store up to 5 Canon LP-E6-style batteries on a 1x3 Gridfinity plate. Related model for the LP-EC Canon Charger .

Pobrania
708
Polubienia
100
Ocena
4,83
P
Printablesjhobson

Canon RF adaptor

We have templates for both male and female pairs of the RF mount. They fit my camera and lenses without further modification. Having done this, I belive it is possible to have a mount that fits both RF and EF - you just have to cut a bit…

Pobrania
700
Polubienia
39
Ocena
0
P
PrintablesEcho116

Canon LP-E6N Protective Battery Cover

If you're looking for a replacement protective battery cover this is it. Print settings: Printed in PLA, .6/.4mm nozzle, .2mm layer height. Will print solid with a .6 or a .4mm nozzle if printed with 2 walls and at least 3 top/bottom…

Pobrania
690
Polubienia
94
Ocena
5
P
PrintablesVisceral3D

Canon Tripod Mount

A connector piece between your Canon camera and your tripod. Incase you loose it or if you need a replacement piece. Made in Fusion 360

Pobrania
687
Polubienia
117
Ocena
4,75
P
Printablesneoyarus

Canon RF 50mm F/1.8 STM Lens Hood

Main features: Stairstep pattern on the inside to further reduce flaring (mimics the original, was a pain to model) Clicks when fully twisted onto the lens Can be put on backward for storage and trasport Has the same markings for…

Pobrania
679
Polubienia
85
Ocena
5
P
PrintablesJB

Canon EF to M42 mount converter

Thanks to the linked makers I was able to merge them and to create this EF to M42 lens adapter. It works well for me but it is possible to improve it. If you printed the design you have to drill a hole at the spot where a camera lens…

Pobrania
672
Polubienia
43
Ocena
0
P
Printablesgrizzie17

Canon EFS 18-135 Lens Hood

The Canon EFS 18-135 Lens is a very good lens, but it does not come with a hood. I tried several different models that others had posted, but none seemed to fit the bill, so I made my own. This model is reversable so it will store well.…

Pobrania
632
Polubienia
80
Ocena
4,25
P
PrintablesZiemniaczenka

Canon EOS Hot Shoe Cover (flash working)

Remix of "A hot shoe cover designed to fit Canon EOS cameras perfectly." by JP that does not block internal flash.

Pobrania
622
Polubienia
64
Ocena
4,44
P
Printablesadp97

T-Ring adapter for Canon (1.25" and 2" ) for telescope

With these files you can now directly attach your camera as a normal observational eyepiece, just tighten them in your 1.25" or 2" eyepiece holder. NOTE: If it doesn´t fit well for your telescope, maybe you can play with the tolerance of…

Pobrania
602
Polubienia
38
Ocena
4
P
Printablesmartinmunk

Canon EF Extension Tube v1 - 50mm

This part is designed to be printable without any support material. A well adjusted printer is necessary fo a tight fit. Extension tubes are mainly used to reduce the focus distance of a lens for macro photo. The sample photos are taken…

Pobrania
567
Polubienia
53
Ocena
5
P
Printablestwothingies

Long lens hood for CANON EF/EFS - 58 mm ø lenses

A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. The stepped inner surface improves light-blocking performance. Compatibility This…

Pobrania
566
Polubienia
60
Ocena
5
P
PrintablesBMdesign

Lens Cap Holders for Canon, Nikon and Sony DSLRs

The newest version of my Lens Cap Holders. Now with more supported filter diameters. The following diameters are supported: Canon: 49mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon: 52mm/55mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon (extended):…

Pobrania
548
Polubienia
128
Ocena
5
P
Printableswhomst

Canon RF to EF mount Tilt Shift adapter

This is a fully printed canon RF body to EF lens Tilt adapter. It allows you to create the “tilt shift” effect with any EF lens. It will also work with any EF body to other lens adapters, I've personally used Nikon F mount, Olympus OM…

Pobrania
528
Polubienia
127
Ocena
4,67
P
PrintablesMateo Van Damme

Battery holder for 2 Canon LP-E17 batteries

I designed the fit to be perfect when printed in Prusament PETG, I haven't tried Prusament PLA or other filaments (yet). The battery type “LP-E17” is embossed on one side. On the other side the same is done in Braille.

Pobrania
516
Polubienia
51
Ocena
4,4
P
PrintablesScooberDiver

Canon EF+RF rear lens cap

This is a rear lens cap that fits Canon EF and RF series lens. Print with supports enabled for the benefit of the three screw segments (I'm not sure what to call them).

Pobrania
513
Polubienia
54
Ocena
5
P
PrintablesM.F7120

Canon R50 or R100 Grip - Remix

Edit 06/07/25: Added smooth versions of the grip without the finger slots and uploaded the fusion360 files to make life easier for anyone that wants to remix, I didn't realize in all this time that I didn't upload it :( Post your make if…

Pobrania
510
Polubienia
33
Ocena
5
P
PrintablesPaťas

camera view finder/eyecup for canon

fits well on my canon 80D but it should be compatible with all these too - 450D 500D 550D 600D 650D 700D 750D 760D 800D 77D 100D 1000D 1100D 1300D, EF Rebel T6s T6i T6 T5i T5 T4i T3i T3 T2i and more printed in one piece with PET-G (for…

Pobrania
501
Polubienia
41
Ocena
4,83
P
PrintablesZiemniaczenka

Sony E to Canon EF adapter with lens lock

I added alternative lever that uses M2x5mm (or longer cut to size) screw as a locking pin, it may scratch your lenses but is stronger and more reliable. To secure the screw in the lever you can use some leftover plastic from…

Pobrania
493
Polubienia
52
Ocena
5
P
PrintablesEmpiricus

Canon FD to RF adapter

Canon FD to RF adapter. Printed in two parts. Wet sand with 400 grit so that you get exactly 22mm height. 3x10mm M2 screws and glue in place when all fits well. Printed in CF-PETG (Atomic filament). 3 perimeter 5 bottom and 7 top layers…

Pobrania
486
Polubienia
50
Ocena
5
P
PrintablesDer.Hubi

Mario Style Canon Piggy Bank

Hi there. Here you are! An Mario Style piggy bank with a canon on top, inspired by Nintendo's WII Super Mario Bros. Level-Canon. The canon can be rotated and tilted. The piggy bank is also available in smaller scale, adjusted for IKEA…

Pobrania
469
Polubienia
194
Ocena
5
P
PrintablesNebukadNezzar

Canon EF / EF-S Rear Lens Cap (with Canon Logo)

An easy-to-print rear lens cap for Canon EF or EF-S lenses with Canon logo and orienation mark. I tried several models, this fits very well and looks pretty much like an original cap. Prints well in either orientation. Tip: If you happen…

Pobrania
465
Polubienia
37
Ocena
5
P
Printablestwothingies

Short lens hood for CANON EF/EFS - 58 mm ø lenses

A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. Check out our growing collection of 3D printable designs for Photography ! Follow us…

Pobrania
456
Polubienia
36
Ocena
5
P
PrintablesOzRocky

Canon Speedlight Grid

I was after a grid for my Canon 580 EXII speedlight, but none of the ones I could buy really appealed to me. They all seem a bit “clunky”, held together with magnets, rubber bands or Velcro. I figured there had to be a neater way. These…

Pobrania
452
Polubienia
114
Ocena
5
P
PrintablesSteph ANTHONY

lens adapter canon EF to pentax K mount

preferable to print with the EF side down.

Pobrania
447
Polubienia
40
Ocena
5
P
PrintablesWivry

Canon lens hood 50 mm

The sun protection (lens hood) for Canon 50mm and 18 - 55mm Classical lenses have 3 hooks for conection, this thing has only 2 hooks for conection You may also liked some of these projects: https://wivry.gumroad.com…

Pobrania
437
Polubienia
105
Ocena
4,33
P
PrintablesTom

Battery Cover Canon LP-E17

This is a cover for canons LP-E17 batteries. It should fit batteries for EOS RP EOS M6 Mark II EOS 850D EOS 250D EOS 200D EOS M6 EOS M3 EOS 760D EOS M5 EOS 750D EOS 800D EOS 77D Please see also my GoPro 9 or 10 batterie cover .

Pobrania
426
Polubienia
58
Ocena
4,92
P
Printables8ball

film door latch for Canon EOS 50/50E (Elan/55)

This is a replacement part for the film door latch of the Canon EOS 50/50e. It is modelled after the original part that broke (view images). I printed it in PLA. Might need some sanding afterwards because it is a very thin part and can…

Pobrania
425
Polubienia
16
Ocena
5
P
PrintablesMachvolum

Canon EFS 55-250mm lens hood

Couldn't find any decent Canon EFS 55-250mm lens hoods that actually fit and locked, so. I made this. It may have to be scaled how you see fit, but it fits for me and it works. So, I'll share it lol I printed it with Prusament petg and no…

Pobrania
421
Polubienia
47
Ocena
5
P
PrintablesKaarel Pärtel

Canon EF/EF-S parametric extension tube

This is a simple tube extension for the Canon EF and EF-S lens mount. The length of the tube can be changed with a Fusion360 parameter. The Fusion360 project also makes use of the ParametricText addon to emboss the text on the side. The…

Pobrania
420
Polubienia
76
Ocena
4,25
P
Printables3DPrintGeneral

Canon Lens Back Cover

This was my first ever attempt at designing in Fusion 360. Further tweaks may be required to be a perfect 1:1 replica - but it does work.

Pobrania
419
Polubienia
63
Ocena
5
P
Printablesfabiankirchen

MultiAlign RF Rear Lens Cap for Canon RF mount

This is a rear lens cap designed to fit the Canon RF mount in three positions. The cap fits standard lenses as well as weather sealed L lenses. It also fits EF lenses. I have included svgs to label the caps so you can quickly see what…

Pobrania
419
Polubienia
41
Ocena
4,8
P
Printablesfhartmann

Gegenlichtblende für Canon EOS R10, 18-45mm RF-S Mount

Beschreibung Diese Gegenlichtblende, welche auf das Objektiv mit Bajonettverschluss montiert wird verringert Streulicht Print Settings Printer: Prusa MK4 Supports: No Resolution: 0.2mm Filament: PETG black Update: 20260730 - Update…

Pobrania
406
Polubienia
43
Ocena
4,8
P
Printablesukwebb

Canon Selphy CP900 4 x 6 Postcard Paper Cassette

I recently bought a second hand Canon Selphy CP900 Photo printer, but it came without a paper cassette. Looking on Ebay revealed that if I could find one it would cost more than i paid for the printer! I couldn't find one on Thingiverse ,…

Pobrania
395
Polubienia
16
Ocena
5
P
Printablesnoname

Eyepiece for Canon EOS

I love loosing small things, that's why I often have to rebuy stuff. But not anymore since I got my printer… This model sits very tight onto the camera, so there is no way of loosing it again. Printing instructions -print it upside down…

Pobrania
395
Polubienia
93
Ocena
5
P
PrintablesByTopein

Clash royale Canon

This is a mini version of the canon from ClashRoyale which can be used to shoot low range objectives. With the only need of a pen spring and a BB you would be abble to have fun shooting whatever you want. Not a powerful gun but it could…

Pobrania
394
Polubienia
40
Ocena
4
P
PrintablesLuXXus

Canon Lens Hood compatibility proofed with Canon RF 100-400mm F5.6-8 is USM / ET-74B Equivalent

Canon Lens Hood designed for a cheap Replacement for ET-74B REPLACEMENT FOR : ET-75B https://www.amazon.com/-/en/LH-74B/dp/B06XSJ3FT4 PROOFED TO BE COMPATIBLE WITH: RF 100-400mm F5.6-8 is USM…

Pobrania
394
Polubienia
34
Ocena
4,67
P
PrintablesJoar

Customizable Canon EF mount

This is a printer friendly customizable Canon EF mount design with a f3d file. On its own there is no practical use case for the part, but possible modifications could be: adding threads to the inside or outside to mount your camera to a…

Pobrania
381
Polubienia
29
Ocena
5
P
PrintablesSigurd2

Canon EOS R7 Extension Grip

Extension Grip for Canon EOS R7 Suitable bolt: Hex head UNC ¼" x ¾" Tested with 100% infill and “stiff” PLA

Pobrania
368
Polubienia
36
Ocena
5
P
PrintablesVasilii

Canon RF 100-400mm F5.6-8 IS USM Lens Hood

A lens hood for Canon RF 100-400mm F5.6-8 IS USM. It's length is 60 mm, and it has an integrated deflection spring lock to prevent it from detaching from the lens. Allows for usage of original lens cap. For best print quality, I advice…

Pobrania
368
Polubienia
28
Ocena
5
P
PrintablesNeumo

Canon AE-1 Program Textured Grip

This model is split into two pieces for easier printing. After printing, the small back piece should be glued into the recess. The finished grip is held in place with a M3x8 screw.

Pobrania
366
Polubienia
58
Ocena
5
P
Printablesdjedi

Slide Duplicator for Canon DSLR

Slide duplicator for Canon lens with a reverse ring. It can transfert 24x36mm slides on a 50x50mm frame. I use it on my Canon 50mm f/1.8 EF lens. For the assembly, you'll need: 6 M3x8 bolts + nuts 1 or 2 M3x10 bolts + female threaded…

Pobrania
365
Polubienia
153
Ocena
5
P
PrintablesTDK3D

Camera strap quick-release clips (Tested with Canon EOS M50 + Nikon D3500)

A quick-release clip for the strap that came with the Canon EOS M50. Just push/pull the clip against the metal fixture facing the gap. I recommend printing in PETG or similar at 100% infill, 3 perimeters. The print orientation makes them…

Pobrania
360
Polubienia
82
Ocena
4,83
P
Printablesbanderies

Canon FD Mount Lens Cap

Cap for Canon FD style lenses (https://en.wikipedia.org/wiki/Canon_FD_lens_mount). This covers the LENS part of the FD mount, NOT the camera body mount. There were other models for this on Printables but none I saw had appropriate tab…

Pobrania
351
Polubienia
18
Ocena
5
P
Printablesjdflute

DESTINY 2 IKELOS HAND CANON

All new model with some tight tolerances. You'll need some two core wire, a couple of cable ties and pins for the trigger, winglets, and breach pin. Add a small spring to the trigger and a tiny bit of compressible foam to the breach pin…

Pobrania
350
Polubienia
156
Ocena
4
P
PrintablesWojtek

Canon LP E6 batteries holder 2 pack

I remixed rogersoh holder to have a smaller version of it Category: Camera

Pobrania
349
Polubienia
24
Ocena
5
P
PrintablesJakub Pelc

Canon FD to EF mount change

This model should allow you to convert your old Canon FD lenses to the more modern EF mount. This model has been specifically created for Canon FD 135mm f/2.5, and may need further adjustments if you wish to convert a different kind of…

Pobrania
346
Polubienia
24
Ocena
0
P
PrintablesJones1403

Canon EOS Clip in filter holder for 1.25" Filters

Easy to print. Has no internal threads, so it might be a bit difficult to screw in the first filter

Pobrania
341
Polubienia
25
Ocena
5
P
Printablesecho

Canon Lens Cover Holder

Canon lens cover holder for 52mm and 58mm Print instructions Print it in 0,1 resolution. No supports are needed.

Pobrania
340
Polubienia
67
Ocena
5
P
PrintablesRob1

MILITARY LEGO lego compatible canon PAK 40 german Anti‑Tank Gun WW2

J'ai utilisé le model sur Thingiverse 8cm PAW-600, par Julian-Silvestri

Pobrania
339
Polubienia
30
Ocena
0
P
PrintablesIgoreveech

Canon EF to Fujifilm X adapter

Perfect and secure fit. Correct focal length. Easy to print. Supports are only needed for "Canon side" clips. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament:…

Pobrania
339
Polubienia
32
Ocena
5
P
PrintablesFilmTeam

58mm Canon lens front cap

Hi, I was in need for a few lens caps and as I didn't have any I modelled them. And after few iterations I got them working quite well. Enjoy and protect your lenses! Cap is a print-in-place model, so a good tolerance is needed Supports:…

Pobrania
328
Polubienia
26
Ocena
5
P
PrintablesJohn Barton

Canon LC-E6 (LP-E6 Charger) - Gridfinity

A 2x3 Gridfinity-compatible LC-E6 organizer. I also put “LP-E6” text below the charger to help identify what kind of battery it charges. The model has cutouts to make the charger easy to grab from the top or sides. Related model for…

Pobrania
328
Polubienia
73
Ocena
4,5
P
PrintablesFloridaMan999

Canonreo

Due to popular demand here is the Canonreo Caps! Still work in progress though. Recently got a 3D printer and came up with this idea after printing a bunch of fidget for the kids. Initially printed with raft with cookie side down but…

Pobrania
325
Polubienia
77
Ocena
5
P
PrintablesEmpiricus

Screen hood for Canon R5

Just a hood for the screen of the Canon R5. May fit other cameras with a screen size of 60x84x7.5mm. 61.4 and 61.6 wide versions to accommodate for different filament shrinkage and less calibrated printers.

Pobrania
318
Polubienia
71
Ocena
4
P
PrintablesOmega-TI

Minolta AF to Canon EF Lens Adapter

I no longer use my Minolta Maxxum 7000 because it's a film camera. If you are like me and have a substantial investment in AF lenses that you want to put back into service for your newer Canon that uses EF lenses, this is an awesome and…

Pobrania
316
Polubienia
19
Ocena
0
P
Printablesandrepadua

Canon LP-E6 Battery Rugged Box (3, 4 and 6 Bat Variants)

Store your Canon Camera batteries for Travel or organization! Choose the right box for the number of batteries you wish to store, and choose the proper fill for your use - there is a fill for batteries with Caps and a fill for batteries…

Pobrania
315
Polubienia
71
Ocena
5
P
PrintablesSkovik

CANON 25 Backshell, DB25 Cover for connector

Backshell for Canon 25 connector (LPT, COM, etc). Krytka pro konektor typu Canon 25. Print instructions Backshell for connector Canon 25 (DB25). Used for LPT or COM - 25. Three versions, for cables: ø = 5 mm ø = 7 mm ø = 9 mm Fasten…

Pobrania
300
Polubienia
9
Ocena
5
P
PrintablesJGDenver

Canon RF Lens cap

(Remixed) redrafted from scratch with looser tolerances.

Pobrania
298
Polubienia
32
Ocena
4,75
P
PrintablesSnafky

Canon 15-85mm lens hood (EW-78E)

This hood is SIMILAR to the EW-78E. Please note that I did a remix of a lens hood that I found online. I only resized the inner circle to match the diameter of the 15-85mm lens of canon. I still had to do a little bit of sanding here and…

Pobrania
293
Polubienia
29
Ocena
4
P
PrintablesNolan O'Connell

MACRO Dispolens canon EF mount

This lens only works at really close focal ranges and has a small aperture. Great for vintage macro shots though!

Pobrania
293
Polubienia
14
Ocena
0
P
Printablesshirtman

Canon RF 35mm f/1.8 Macro IS STM Lens Hood

Canon RF 35mm f/1.8 Macro IS STM Lens Hood. Two styles. Full and tulip. • Snaps on and holds tight. • Reversible so you can store backwards on lens. • Access tabs on either side in case you need help removing. I suggest using a soft…

Pobrania
285
Polubienia
33
Ocena
4,75
P
PrintablesJoel

Canon EOS APS-C Clip-in Filter 1.25" Converter

Remove the 27.5mm Glass from the original 1.25" housing and pressure fit into the camera clip-in filter. Confirmed working with SVBony UHC and CLS filters. Can be used with EF-S Lenses with wide angle astrophotography or used in…

Pobrania
285
Polubienia
21
Ocena
0
P
Printables3D Senju

Canon Lens Container and Pen Holder

This is a container made to be a 1:1 replica of a canon EF-S 18-55mm lens. I have made it so that the 125% scale version has more details than the 100% scale because of the size and resolution. All of the white text has been paintet on…

Pobrania
278
Polubienia
73
Ocena
5
P
Printablesdanec

Canon lens cap

This 3D model is designed for a protective lens cap specifically tailored to fit the Canon EF 50mm lens. Once printed, it offers a snug fit to safeguard the lens from dust, scratches, and other potential damages. Printed on Prusa MK3S+,…

Pobrania
272
Polubienia
25
Ocena
3
P
PrintablesWim V

View Finder/Eyecup for Canon EOS2000D

The original viewfinder has the same clamping mechanism. I added a bevel on both sides to make it fit because the width of the viewfinder is a little sunken into the body. Printed with layer height of 0.15 (first layer 0.2) using tree…

Pobrania
272
Polubienia
33
Ocena
4,75