Wyniki wyszukiwania: carr

Sortowanie

4609 modeli

P
PrintablesY Ibrahim

The Prusa Mouth Organ - A printable harmonica w/ Carry Case

Overview A fully printable, fully functional printable harmonica in a simple 3-piece form factor that clips together - no fasteners needed! The design features swappable reed plates which set the playable notes. The attached reed plate…

Pobrania
5156
Polubienia
981
Ocena
3,83
P
PrintablesDave

Steam Deck Carrying Case Insert With Stand (EU Plug + MicroSD)

I liked the remix from ANBAL534 ( https://www.printables.com/model/207028-steam-deck-carrying-case-insert-for-eu-plugs-europ) but missed the option to use the case as a stand as well. Besides that I don't use full SD cards, I opted in…

Pobrania
4313
Polubienia
592
Ocena
4,66
P
Printablesvaclavh

Collapsible Carrot

Nice collapsible carrot which can be magically pulled from your hand. Or from a combination safe lock box or from an egg shell . Prints mostly in place, just the carrot tip have to be inserted into the collapsed carrot body and pushed…

Pobrania
1569
Polubienia
400
Ocena
4,95
P
PrintablesThe Mapster

Porsche Carrera 911 (992) Silhouette Wall Art

Celebrate the legendary Porsche 911 Carrera with this captivating wall art silhouette. Combining timeless design and exhilarating performance, this artwork pays homage to one of the most iconic sports cars in automotive history. The…

Pobrania
1250
Polubienia
163
Ocena
4,86
P
Printablespatrickzell

Carrera 1:32 Slot Car Stand

Ein Ständer für 1:32er Slot Cars. Guut für die Präsentation in einer Vitrine oder einfach nur zum schonenden abstellen, damit die Reifen beim Stand über längere Zeit nicht in Mitleidenschaft gezogen werden.

Pobrania
1211
Polubienia
106
Ocena
5
P
Printablesbaldsealion

Steam Deck + Dock Carrying Case Insert US Plug (two MicroSDs Slot)

Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…

Pobrania
1186
Polubienia
131
Ocena
4,67
P
PrintablesHydrotatic

2in1 Cardholder Carry & Display

* v.2.1 made slot support thicker so it doesn't break anymore, requires a little more force to go together but its much stronger. *v.2 Changed dimension to fit Creditcards and can be used as a wallet Perfect for professionals,…

Pobrania
1163
Polubienia
324
Ocena
4
P
PrintablesBassettDesigns

Olaf's Nose - Snowman Carrot Nose

A make of the iconic nose of Olaf, ready to be used for your snowmen or strung as a costume/cosplay nose. Costume Notes: Versions are included with and without breathing holes for those who wish to modify the nose to make it their own.…

Pobrania
842
Polubienia
69
Ocena
4,86
P
PrintablesAinon3Dtisk

Grocery bag carrier for multiple items at once

Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…

Pobrania
710
Polubienia
325
Ocena
4,75
P
PrintablesLandoRi

Pre-2024 Chaos Space Marine Combat Patrol Carrying Board

For all Warhammer 40k players who want to carry around their CSM Combat Patrol! This is a small board that holds all 10 Chaos Space Marines, 5 Havocs, the Dark Apostle and Disciples, and Hellbrute. At worst you may have to print it at…

Pobrania
691
Polubienia
67
Ocena
0
P
PrintablesEnderiusX

MGN12H Carriage Holder

Useful print to have when washing MGN12H carriage blocks in IPA in an ultrasonic bath or when you want to thoroughly clean/lubricate your linear rails without accidentally knocking the carriage off and having to pick up all the little…

Pobrania
679
Polubienia
45
Ocena
4,67
P
Printableslawitzer84

circular beer bottle carrier + opener

I had some issues while printing this. Also got the input from a friend that a bottle opener attached to it would be nice. So I remixed it for a slightly better printability and added a standard bottle opener to the design. You have to…

Pobrania
662
Polubienia
105
Ocena
4,5
P
Printablesszonet

Kel Tec P17 Mag carrier

Kel-Tec P17 Mag carrier Reupload from thingiverse.com by hello_there_pal Kel-Tec P17 holster https://www.printables.com/pl/model/563948-holster-for-kel-tec-p17

Pobrania
553
Polubienia
52
Ocena
5
P
PrintablesTronnic

6 Pack Beer Carrier for 0.5 L Bottles - Bier Flaschenträger

My creativity level sky rockets when I'm drunk. For some reason, I decided to design and print a 6 pack 0.5L bottle holder yesterday evening, haha. It even has a lid! Don't ask why :P I guess I was looking for things to do, having a…

Pobrania
510
Polubienia
141
Ocena
5

Katana carrier backpack for Lucky 13

Printed with Prusament PETG Jet black. Katana sword model: Katana for Lucky 13 by kh4rj0 | Download free STL model | Printables.com

Pobrania
465
Polubienia
187
Ocena
5
P
PrintablesJohnM

Roadlok motorcycle disc lock pin carrier

The Roadlok is an excellent motorcycle lock, and the locking pin is extremely easy to fit under the seat or in a jacket pocket. Here's a review of it:…

Pobrania
457
Polubienia
15
Ocena
5
P
PrintablesRobertusMaximus

APC V7 Armoured Personnel Carrier

In the darkness of the far distant future, the mutant, alien, and worse plunder the megalopolis cities. Some looking for forgotten technology and precious metals, and others for the sweet taste of Hum’ahn flesh. Despite the endless…

Pobrania
361
Polubienia
68
Ocena
5
P
PrintablesPRINTER

Greenhouse with special Carrots

Greenhouse with special Carrots Mini greenhouse: A special money gift idea. The base is 150 mm long with a width of 120 mm, the total height to the roof is 130 mm. I built this little greenhouse for my girlfriend's birthday because she…

Pobrania
286
Polubienia
71
Ocena
5
P
PrintablesNigel Johnson

Single dose vase mode tablet carriers

Only need to carry a single dose of a couple of tablets around with you? don't want to carry the box? I gotcha! Print instructions In the same way I vasemoded my stacking pill holders, I thought I'd do something similar to my pill-shaped…

Pobrania
276
Polubienia
47
Ocena
4,67
P
Printablesdanny520

Print-in-Place 6X6 APC (armoured personnel carrier)

Print took around 33hrs with %15 infill, .16 layer height. Has moveable wheels and SAM surface-to-air-missile.

Pobrania
267
Polubienia
35
Ocena
5
P
PrintablesRobertusMaximus

APC-0-V7 Armoured Personnel Carrier - Open Body

In the darkness of the far distant future, the mutant, alien, and worse plunder the megalopolis cities. Some looking for forgotten technology and precious metals, and others for the sweet taste of Hum’ahn flesh. Despite the endless…

Pobrania
251
Polubienia
48
Ocena
0
P
PrintablesRobertusMaximus

Combat Carrier Prototype 99A

Combat Carrier Prototype 99A as inspired by my novel “Mongruxx - Until we cross this bridge again" Book 4. A semi-sentient broken down combat bot, Weaponeer 259 builds. His cavalcade included seven of these vehicles. In the dark,…

Pobrania
185
Polubienia
52
Ocena
5
P
PrintablesBubba_BWatts

Curvy 6 Pack Carrier

This carrier holds 6 12oz cans. The handle and anchors are screwed together using 2 M5 screws (8mm or 16mm, either one will work). Two pairs of 6x3mm magnets hold the top and bottom half together. It is a tight tolerance (0.5mm) between…

Pobrania
179
Polubienia
19
Ocena
5
P
PrintablesBooks

McMaster-Carr 5 Gallon Isopropyl Alcohol Container Spout

A threaded screw-on spout for the 5-gallon isopropanol drum from McMaster-Carr. Several spout designs available. Still in testing.

Pobrania
162
Polubienia
17
Ocena
5
P
PrintablesMilan98

Pouzdro na přenášení cigaret VEEV - VEEV Cigarette Carrying Case

Když se cestuje, cigareta VEEV zůstává uzavřená a čistá When traveling, the VEEV cigarette stays closed and clean

Pobrania
154
Polubienia
11
Ocena
5
P
PrintablesPierrem

Zerup syrup holder/carrier

A simple carrier zerup syrup bottles. It holds 6 bottles and has a little handle to carry around. Mine was printed in PETG on a prusa mini. It should work as well with PLA. I am quite new at 3d modeling/printing so it remains simple. I…

Pobrania
149
Polubienia
13
Ocena
4
P
PrintablesRobertusMaximus

Death Valley APC Container Carrier

Death Valley APC Container Carrier For your up armoured death-dealing troops, deliver these contains that can brook no delays. The mutants, aliens, heretics, and worse are on the march. All converging on your beloved district inside the…

Pobrania
144
Polubienia
24
Ocena
0
P
Printableswuerfel

Every Day Dice Carry (EDDC) Box "d20"

Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…

Pobrania
142
Polubienia
35
Ocena
5
P
PrintablesMehTechArt

Crazy Carrot – Fridge Magnet

Please click ❤LIKE❤ if you appreciate my work 😊 This funny 3D carrot is a perfect little accessory for your fridge or magnetic board. With its cheerful face, it’s guaranteed to make you smile every time you reach for food. Model details:…

Pobrania
133
Polubienia
21
Ocena
5
P
PrintablesRSpace

QR Code - Carry On by Kansas

Dimensions are 45x45mm and 3mm thickness, with color layer change at 2.8mm

Pobrania
97
Polubienia
35
Ocena
5
P
Printablesastrophage

Vintage Makita Carry Case Clasp

This is a replacement clasp based on for an old vintage Makita carry case that held batteries and a charger. My grandpa used this for years until one of the clasps broke, so I design a parametric replacement with OnShaspe . I printed in…

Pobrania
91
Polubienia
16
Ocena
0
P
PrintablesUKE

Replacement closure for a SAVIC pet carrier

Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…

Pobrania
84
Polubienia
61
Ocena
0
P
PrintablesFokieH

Shark Flexstyle Wallmount Accessory Carrier

Ein Halter um das Zubehör des Shark Flexstyle Föns griffbereit aufzubewahren. Den Halter haben wir mit doppelseitigem Klebeband an der Wand befestigt. Gedruckt in PETG im Modus 0,2mm Structural mit minimalem Einsatz von Stützmaterial für…

Pobrania
81
Polubienia
12
Ocena
0
P
PrintablesAdrián Vidal

Fully customizable Ring case/carrier

Fully parametric and customizable ring case with a hole to add a loop You will need an M3 bolt and nut (i used a 10mm long one but it migth differ if you customize it to fit a larger ring or several ones). Also a pair of cilindrical…

Pobrania
63
Polubienia
16
Ocena
5
P
PrintablesDenholm365

Prusa XL Carriage cover - JarJar

I love so much my XL5, I regret nothing ! As a StarWars fan, I made a custom carriage cover with 3 colors. JarJar face has been created with Dall-A and used as an SVG insert for color Painting.

Pobrania
62
Polubienia
19
Ocena
5
P
PrintablesNiH

Lightsaber electronics carrier

Carrier for the electronics used in a lightsaber. This is a model for those who are constructing their own saber and need an easy electronics pack to slide into the body of the saber. You need a slot diameter of 30mm with a minimum lenght…

Pobrania
55
Polubienia
13
Ocena
0
P
PrintablesPrUdEn

Carrito decorativo para plantas pequeñas o cactus

Es un bonito carrito decorativo. Para colocar una pequeña planta o para lo que se nos ocurra o simplemente como elemento decorativo. Espero que os guste

Pobrania
54
Polubienia
8
Ocena
0
P
Printablesnicolaw

Brother P-Touch label printer carry case closing clasp clip

onShape project link: https://cad.onshape.com/documents/1894d02ecaa4b2414941a4ef/w/b753588c5f0c2a7336bb1dcd/e/ee97b6d37c0dfa6069f73359?renderMode=0&uiState=68fc0399350226304e6edf3d Brother P-Touch E550W label printer case clip.

Pobrania
52
Polubienia
4
Ocena
0
P
Printablesisti115

Seek Thermal Nano Carrying Case

The extra bump on the lid is meant to prevent the camera from moving around too much, as it's not 100% snug. (I've left extra tolerance to make sure that it fits.) There's still a tiny bit of movement left in my case, so if you'd like to,…

Pobrania
51
Polubienia
1
Ocena
0
P
PrintablesOgre Ray

Everyday Carry Caddy - Samsung Galaxy Watch Ultra; Ridge Wallet; pocket knife; & ringholder

This is a bedside Every Day Carry (EDC) caddy. I built this for: a built in watch charger holder for the Samsung Galaxy Watch Ultra a ridge type wallet with money clip (and a lot of cards A pocket knife slot (I have bench made with pocket…

Pobrania
50
Polubienia
11
Ocena
2
P
Printableshazeleyes

LiPo Battery Carrier for Belt Clip

Parts Required to Complete: SmallRig Mini V Mount Battery Plate with Belt Clip 2990 V Mount Accessory Plate ( 3D printed or from SmallRig MD2801 ) M3 x 6 Flat Head Screws (3) Battery Strap Velcro, Servo Tape, or Non-Slip Pad Why I Made…

Pobrania
50
Polubienia
4
Ocena
0
P
Printablesdjedje_zr7

Motocycle case carrier clip for side bags

Remove support Add/glue rubber (in black below) to prevent the parts from sliding (rotation) on the metal support Tighten with M4 six hex screw and nut

Pobrania
49
Polubienia
14
Ocena
0
P
PrintablesBooks

McMaster-Carr 5 Gallon Isopropyl Alcohol Container Cap

A threaded screw-on cap for the 5-gallon isopropanol drum from McMaster-Carr. A rough FreeCAD model of the neck in available as well.

Pobrania
46
Polubienia
3
Ocena
0
P
PrintablesKatarn

FAT Prusa MINI+ - X Carriage - 5020 Blower

Enhance your Prusa MINI+ with this 5020 fan upgrade. Replace the MINI-x-carriage.stl part for improved layer cooling. 5020 fans mean more airflow thanks to their dual air income. This mod not only eliminates stringing but also handles…

Pobrania
41
Polubienia
13
Ocena
0
P
Printablesb8trez

Suzuki Carry - DA16T - Seat clamp clip

Hey friends, I made a small replacement plastic clip found on the Suzuki Carry seat retention clamps. I'm unsure what the genuine part number is, but I suspect it won't be possible to purchase the clip. I used grey PETG and 100% infill…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesR.R.

Ferrari 375 S N 0286AM Carrera Panamericana 1954

Ferrari, as usual, was represented by an excellent lineup of private cars. The fifth edition of the Carrera Panamericana was characterized by the duel between two Ferrari drivers: Umberto Maglioli driver of the “four-point-nine”, a 375…

Pobrania
35
Polubienia
0
Ocena
0
P
Printablesafonsopolly

Suporte carregador galaxy whatch

galaxy whatch charger support , fio saindo tanto do lado direito quanto esquerdo Pode ser usado de pé ou deitado

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesMücke

KWA - M11A1 - Airsoft Tracer Carrier - Free Download

A tracer carrier for your KWA M11A1.A tracer carrier for your KWA M11A1. Uses Standard AceTech Tracer Unit. Only place supports like this:

Pobrania
30
Polubienia
6
Ocena
0
P
PrintablesdePrintinator

Creality X Carriage Hemera Slim Mount

Summary I made a slim mount for Creality machines (CR10/S, Ender/Pro tested) that use their standard X-carriage (newer printers may use a different carriage so I've included a drawing of the mount so you can verify fit before printing. I…

Pobrania
27
Polubienia
1
Ocena
0
P
Printablesmudwuk

VESA Carry Handle

This is a carry handle that can be fixed to a monitor or television using the rear VESA mount. Can be used to carry the monitor using one hand, avoiding needing to hold the bezel. Tested in ABS at 0.25mm and 15% infill on a 5kg monitor…

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesZbyněk Král

LED Strip Profile Carrier

Mounting for an RGB LED strip profile to the ceiling or a wall. Dimensional specifications for the profile are provided in the attachment. Below, you will also find a link to my OnShape and I also attach a STEP file in case you wish to…

Pobrania
26
Polubienia
8
Ocena
0
P
PrintablesHighTechRedNeck

Long Benchy Pen Carrier

First, there was the benchy. Iconic, tried, trusted. Then there was the long benchy, because if benchy is good, more benchy is more good? Now there's the benchyboat pen carrier! All the aesthetic comfort of a benchy, the lengthened excess…

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesDenholm365

Prusa XL Carriage cover - Jinx

For ARCANE animation series fans, I made a custom carriage cover with 3 colors. JINX graffiti has been turned into SVG insert for color painting.

Pobrania
23
Polubienia
5
Ocena
0
P
Printableshelja.dankill

Every Day Dice Carry (EDDC) Box "Sword" - 5x3 magnet holes

Many thanks to @wuerfel for the original model!

Pobrania
19
Polubienia
12
Ocena
0
P
Printablestom

Tragegriff für das „PrintClosure Project”/ Carrying handle for the “PrintClosure Project”

Zwei dieser Griffe seitlich an das Gehäuse PrintClosure Project montiert und erleichtert das Heben und Bewegen. Der Lochabstand für die im Gehäuse vorhandenen Schrauben beträgt dank der Langlöcher von 50 bis 54 mm. Translation: DeepL Two…

Pobrania
19
Polubienia
4
Ocena
0
P
Printablesclusterfuggles

Pet Taxi Pet Carrier Clip

My Pet Taxi lost a couple of the clips that hold the top and bottom together so I designed a new and improved replacement. Example printed out of Hatchbox Blue Gray PETG with 5 perimeters, organic supports and a brim for stability.

Pobrania
18
Polubienia
2
Ocena
0
P
Printableshelja.dankill

Every Day Dice Carry (EDDC) Box "Bow" - 5x3 magnet holes

Many thanks to @wuerfel for the original model!

Pobrania
16
Polubienia
7
Ocena
0
P
Printableshelja.dankill

Every Day Dice Carry (EDDC) Box "Pattern" - 5x3 magnet holes

Many thanks to @wuerfel for the original model!

Pobrania
16
Polubienia
9
Ocena
0
P
Printableshelja.dankill

Every Day Dice Carry (EDDC) Box "Elements" - 5x3 magnet holes

Many thanks to @wuerfel for the original model!

Pobrania
16
Polubienia
4
Ocena
0
P

Outin Nano Filter Baskets Carrier

OutIn Nano espresso machine filter baskets unlimited stackable carrier.

Pobrania
16
Polubienia
2
Ocena
0
P
Printableshelja.dankill

Every Day Dice Carry - Symmetric mirrored version of "Insert_RectHex"

Many thanks to @wuerfel for the original model!

Pobrania
14
Polubienia
1
Ocena
0
P
Printablesjordy lavreys

30mm carrosserie ring

30mm carrosserie ring met een 5mm gat in het midden. ik heb dit gebruikt bij een zeil vast te maken op hout

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesMax Weston

Spool Carrier

You can make the axle out of PLA or PETG (Set infill to solid) I use PETG now, it plenty strong enough

Pobrania
11
Polubienia
1
Ocena
0
P
Printableschrisebryan

Soldering Station RT1 Carrying Case

This case was inspired by my laziness to put soldering equipment away when i was done with soldering. It's designed for the Soldering Station RT1 sold on tindie by PittiniHub. Link to product i use. Parts For assembly you will need: 2x…

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesJoris Calvat

RC - Maverick ION XB 1-18 RTR - Attache carrosserie

Je n'ai pas trouvé de pièce de remplacement dans le commerce. Celle ci n'est pas identique à l'originale, mais permet une attache propre de la coque avec un petit clip métalique tout en laissant passer la vis en son centre. Le fichier…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesAlex_Iskra

Bridge Baby Toy (Carry case for kids)

I was playing DS and my daughter really got into the whole carry the baby thing and started to strap dolls to herself. So a decision was made one evening to create a BB pod carry case that can fit a 110mm long doll (or anything else). It…

Pobrania
10
Polubienia
3
Ocena
0
P
PrintablesRealPrint

Hook for Ortlieb QL1 on a MIK luggage carrier / Haken für Ortlieb QL1 an einem MIK Gepäckträger

Die Original-Haken sind zu hoch, wenn man zusätzlich ein Topcase mit MIK (2.0) Halter auf einem MIK Gepäckträger befestigen möchte. Diese Haken ermöglichen das. Zusätzlich ein Haken für den größeren Durchmesser unten. The original hooks…

Pobrania
10
Polubienia
4
Ocena
0
P
Printables3D2H

Carry-on Box - TriShade & CMF Lenses (print in place)

I was looking for a carry-on box for my TriShade design https://www.printables.com/model/1300501-trishade-optimised-light-protection-for-mobile-tri This is the result, including the lenses provided by CMF. NOTE: I don't have the lenses…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesSymetium

oled tv carrying helper

i designed this to make it easier to carry an oled tv without putting preasure on the glass or causing smudges it is entirely untested please note that this has not been tested so use this at your own risk i am not responsible for any…

Pobrania
3
Polubienia
0
Ocena
0
P
Printables3DPmom

Carrot Garden Layered Fidget Toy

Gardening just got fun with this cute little carrot patch 🥕🥕 Plant it on your desk, coffee table or anywhere else that needs a little touch of spring. I have included the following digital files: (1) Big Carrot (2) Small Carrot (3) Bed of…

Pobrania
18 589
Polubienia
5479
Ocena
4,94
P
PrintablesSTORM DESIGN

Bambu Lab Filament Spool Winder - Filament Guide, Filament Guide Sled, Filament Guide Carriage and Knob M3 Heat Threaded Insert

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…

Pobrania
8985
Polubienia
663
Ocena
4,92
P
Printablesagepbiz

Surprise Egg #7 - Tiny Car Carrier

Print-in-place and Articulated Surprise Egg #7 - Tiny Car Carrier 'Making of' video: https://youtu.be/lOENd-wVnmA The cars and the egg was each designed to be printed in place without any support structures. The Car Carrier do have…

Pobrania
8678
Polubienia
1855
Ocena
4,86
P
PrintablesRJCDesigns

Travel/Disposable Child Safe Knife, Fork and Spoon Kit Card + Carry Cases

Cutlery Kit Card – Knife, Fork and Spoon. A compact cutlery kit card combining a fork, spoon and (child-safe knife) in a single, lightweight design. Created with a focus on comfort, compactness, and fast printing . The card format keeps…

Pobrania
7747
Polubienia
1991
Ocena
4,9
P
PrintablesStrider460

Steam Deck Carrying Case Insert

NOTE: This was designed for the charger that comes with the Steamdeck LCD. The charger that comes with the Steamdeck OLED is longer and may not work with this accessory! Not so much a remix but a reimagined insert for the back of the…

Pobrania
7484
Polubienia
1336
Ocena
4,86
P
PrintablesHumble Studio

Dummy 13 Armor/Plate Carrier

Military Style Plate Carrier for use Dummy 13 Tactical, compact, Sturdy.

Pobrania
6386
Polubienia
1392
Ocena
4,97
P
PrintablesJakub Kočí

Motorized carriage 810 (H0)

This is a model of the motorized carriage 810 commonly used by the czech railways. The model size is H0 (1:87), suitable as a wagon or motorized carriage for model railways. Read more at…

Pobrania
5094
Polubienia
222
Ocena
4,88
P
Printablesstublag

Suzuki Carry Kei Truck

Print Details Full truck with cargo: 239g Truck only: 167g Dimensions: 3.25x 5.75 when printed at 100% v2 (6/9/23) Hello! I went back and cleaned up the model a little bit. Here's what's new: Uploaded all of the individual parts The…

Pobrania
4723
Polubienia
2206
Ocena
4,88
P
Printablesbigovereasy

Flexible Baby Carrot Keychain

Don't forget to give me a like 🧡 Share photos of your prints 🥕 ©Personal use only 💀 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬 I made two versions - with eyes and without 👀. The carrot top prints separately. It has a small…

Pobrania
4456
Polubienia
1118
Ocena
4,87
P

KeyCarry - EDC Key Organizer (M3 screw compatible!)

Why carry your keys as a jingling mess if you can carry them on a beautiful organizer?# Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world of difference to…

Pobrania
4040
Polubienia
1907
Ocena
4,87
P
PrintablesSD-3D

Heavy Duty Grocery Bag Carrier

I designed this Heavy Duty Grocery Bag Carrier with an added strengthening rib running through the model the same as the Bag Coat Hangers I designed. These strengthening ribs add extra wall loops in the centre of the part. That means the…

Pobrania
3587
Polubienia
1201
Ocena
4,84
P
Printableswill

Grocery Bag Carrier Handle

V2 Sturdier Improved load capacity with almost twice Enlarged the handle hole (previous was way too exact even for my hand) Has a top surface with more rounded corners and the bottom surface has 45 deg chamfer for easier printability This…

Pobrania
3511
Polubienia
708
Ocena
4,97
P
PrintablesMartin_au

Makita Battery Carrier

A battery carrier/tote for Makita 18v batteries. It's stable and won't tip over even when fully loaded on one side. I've included two versions. A low profile one, with almost no space under the batteries, and a high profile version with…

Pobrania
3287
Polubienia
498
Ocena
4,96
P
PrintablesMcAbra

EVA 3 - Modular 3D Printer carriage platform

Visit https://main.eva-3d.page/ for all the files, variants, and information that would not fit here. When remixing , please remember to add your remix as a remix of this project. Please respect the license - it's a ShareAlike, meaning…

Pobrania
3279
Polubienia
499
Ocena
4,8
P
PrintablesMartin_au

Milwaukee Battery Carrier

A battery carrier/tote for Milwaukee 18v batteries. It's stable and won't tip over even when fully loaded on one side. It also includes a quick connect wall mount. Uses a pair of 8g stitching screws like these -…

Pobrania
3035
Polubienia
608
Ocena
4,82
P
Printableschuyskywalker

Bambu Labs Spool Desiccant Carrier

Strongly recommend this remix/remodel ------------------------------------------------------------------------------ A really simple desiccant spool center for Bambu Lab's spools. Does not interfere with AMS and has an easy twist lid.…

Pobrania
3004
Polubienia
329
Ocena
4,95
P
Printablesiczfirz

Baby Yoda in Carrier Support Free

Subscribe Now! A very good model from Multiverse3DDesigns. Remixed to support free to do timelapse. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Addiction to 3D Printing? Watch…

Pobrania
2857
Polubienia
507
Ocena
4,88

Circular Beer Bottle Carrier

I don't have much storage space at my place and always hated how bulky traditional beer trays were, so when I got bored and thirsty at the same time the other day, I designed this compact minimalist version. It holds the bottles by…

Pobrania
2846
Polubienia
775
Ocena
5

Bag Carrier

The bag carrier is a low-cost, 3D-printed handheld tool that distributes the weight of bags carried. This 3D Printed Assistive Device can assist people with arthritis or other disabilities to carry plastic bags and reusable bags. This bag…

Pobrania
2770
Polubienia
931
Ocena
4,93
P
PrintablesMaekri

Collapsing Carrot Sword

In the leaf model, you need to change the color at about 6mm height to look cool. 잎사귀 모델 출력시 6mm 높이에서 초록색으로 바꿔주면 더 좋습니다

Pobrania
2537
Polubienia
315
Ocena
2,67
P
Printableshumebeam

Icarus 2 - QIDI X-Max / X-Plus / I-Mate / X-Maker Carriage (Orbiter, Sherpa Mini, LGX Lite)

Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…

Pobrania
2498
Polubienia
226
Ocena
5
P
PrintablesSaguaroMaster

Voron 2.4 / Trident Carrying Handle

This modified version uses M3x12 bolts instead of M5s, as M3s have by far enough strength to hold the weight of the printer. Also, I did not have M5 blots and nuts laying around. BOM (per handle): 2x M3x12 bolts of any type 2x 2020…

Pobrania
2425
Polubienia
352
Ocena
5
P
PrintablesDET-Man

CNC X-Carriage Add-On Parts for VORON Stealthburner (Vitalii3D)

The VoronLightweightXCarriage by Vitalii3D 🥰 is a fantastic lightweight carriage for the Stealthburner but I was not happy with the existing cable management solution for a ClockWork 2 setup. So, time to make some parts. The Features A…

Pobrania
2420
Polubienia
18
Ocena
0
P
PrintablesArmand

PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp

PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…

Pobrania
2348
Polubienia
1583
Ocena
4,91
P
PrintablesJosef Fröhle

Makita Battery Mount Carrier

I have now published the carrying aid/storage box for 2, 4 and 6 batteries. What do you think is still missing? Update: 2023-02-16 - Carrier for 2 batteries 2023-12-20 - Carrier for 6 batteries

Pobrania
2342
Polubienia
259
Ocena
4,95
P
PrintablesNoloxs

Makita battery carrier

In an attempt to get more organized with my tools and batteries, I wanted to make something that I could use to store the batteries as well as use as a way of easily transporting the batteries when I have to take them with me. I have…

Pobrania
2319
Polubienia
390
Ocena
4,95
P
PrintablesMateusz Tokarz

Shopping Bag Carrier Handle | Hand Saver

BOM: Printed with ROSA3D Starter PLA Light Blue Stop letting heavy plastic bags cut into your fingers! This simple, ergonomic shopping bag carrier is an absolute must-have for anyone who regularly walks home from the grocery store. The…

Pobrania
2075
Polubienia
605
Ocena
4,9
P
PrintablesHenlor

Creality K1 X Carriage CAD

Work in progress. Be warned, this model may contain some dimensional inaccuracy. This model is meant to be used as an asset in CAD software. I don't recommend to print this model as it is. It's not optimized for FDM printing. Creality K1…

Pobrania
2005
Polubienia
215
Ocena
5
P
PrintablesLine Arc Line

Carry That Skadis!

I want you to be able to organize your tools using the Skadis pegboard system and keep them within arms reach. This portable panel lets you set up an organized swatch of tools and materials and carry them over to wherever you're working.…

Pobrania
1996
Polubienia
1234
Ocena
4,97
P
PrintablesVice

Carrot Container

It's a carrot that's also a container. Why? Because carrot. Print without support. Scalable up to %200 without issues.

Pobrania
1972
Polubienia
282
Ocena
5
P
PrintablesmahatmaJman

Voron 2.4 BLTouch mod for Afterburner and Stealthburner X Carriage

These models have been derived from the existing designs by Voron Design, thanks so much to the Voron Design team for the massive effort put into these excellent machines. Centralised BLTouch mod for Voron Afterburner (AB prefixed x…

Pobrania
1906
Polubienia
193
Ocena
5