1498 modeli
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
Wydruk około 4,01 €–4,90 € nettoWstępna wycena jednego wariantu
Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…
Update Jun 02, 2025: I removed the Printer'n Beer tag that was on the side and put it on the back. So the tag is no longer visible once installed. Update March 13, 2025: A version with a dedicated slot for each tool provided with the…
An easier to empty poop drawer for the Elegoo Centauri Carbon. Covers the factory poop door, and a nice drawer slides out the side. Mounts with the existing poop chute screws, and one replaced chassis screw. Use an M3x10mm screw on the…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
This remix arranges the eight parts of the Elegoo Centauri Carbon Riser (originally STEP files) into a single print plate for easy printing. The STL file contains the pre-arranged layout. (Note: The STL may import as a single mesh in some…
Required Stls: 1x hinge_upper 1x hinge_lower 1x arm_upper 1x arm_lower 2x nut_block *4x plastic_spacer *The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass. Required Hardware:…
This is a tool tray designed for the Elegoo CC that mounts to the Spool side of the unit. This does Not use magnets but uses two of the CC's side panel screws to mount it. Longer screws are not needed. Note: This is an original design and…
Screen Accent for the Elegoo Centauri Carbon.
This is a simple dual-bearing spool holder for the Elegoo Centauri and Centauri Carbon. Required hardware 608 bearing, x2 I strongly recommend using greased bearings. The grease provides some resistance which helps to slow down the spool…
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
This is a HEPA filter option for your Elegoo Centauri Carbon 3D Printer There are two print model options for you to work with Is a magnet option that works with 2mm magnets you can easily place it on the back when needed is an option…
Snap in place - Removable poop chute for the Elegoo Centauri Carbon. Poop chute which snaps in place with magnets. The poop chute “floats” and is connected to the printer, which comes in handy with the anti-vibration feet installed. No…
I wanted a simple and quick to print tool caddy, that can hold all the included tools for the Centauri Carbon printer. Plus a pair of flush cutters. The tools are organized, with the most frequently used tools towards the front. The…
The model holds all the accessories. It's available in 4 variants. I would recommand printing the variant that uses the integrated screws. This is due to the weight of all the accessories. Model has been updated with better holes for the…
SE3D Toolhead Cover for Elegoo Centauri Carbon Before you grab this version, check out v2.0 . This is a redesigned toolhead cover for the Elegoo Centauri Carbon that improves both print quality and day-to-day usability. Key improvements:…
I am space limited due to a shelf above the Centauri and I plan to use it primarily for ABS / ASA prints so I used Prusa Slicer to chop off the vents but retained the angled shelf to add in led light strips. The Centauri Carbon is dark…
NO MORE kinked tubes, broken filament or issues loading or unloading. This is a NEW version of my other riser that now has an incorporated slot to relocate the PTFE tube through the riser! Also has a larger relief on the back corner to…
Poop chute for the Centauri Carbon. The model does not require supports when printing. This poop shoot does not need to be screwed into the back of the machine, so can be easily removed to empty out the tray.
Update Jun 02, 2025: I removed the Printer'n Beer tag that was on the side and put it on the back. So the tag is no longer visible once installed. I added slots for all the tools provided with the Elegoo Centauri Carbon on my base, which…
****UPDATE 2**** I included another STL with the air outlet moved over and away from the poop shoot for those that are enclosing the the poop shoot. ****UPDATE**** ****Please check last pic on where you do NOT glue magnets in as these are…
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
This is a little slide for the Elegoo Centauri Carbon to move the CC MINI to an easier to access place. Note: the CC MINI model is available separately (from Elegoos website and from the USB stick that comes with the printer). There are 2…
NEW UPDATE: Behold an improved and raised version! I extended the bellow section to add one more to prevent bottoming out during Ludicrous mode prints Added more thickness to the adapter interface for more high frequency vibration damping…
simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…
This door holder is specifically designed for the Elegoo Centauri Carbon enclosed 3D printer. It allows you to securely prop the front door open at a fixed 10-degree angle. Purpose Provides slight ventilation for the print chamber when…
A remix of SE3D model. (14Jun26) New folder organization (25May26) Added frontSkeletonCanvas, frontSkeletonCanvasNotFanScrews and frontVCanvas. Need 5x3mm magnet. Three preliminary front covers for Canvas compatibility. The second cover…
This is an update to the provided scraper holder provided by elegoo that allows you to magnetically attach the scraper to your printer. Two options provided one for larger and one for smaller magnets Link to the smaller magnets -…
A filament dry box that mounts to the side of the Elegoo Centauri carbon based on the design of @NaNO3 which was originally based on @Yanev 's parametric toolbox. I have included versions for the lid that work with or without the addition…
Poop Bucket / Waste Catcher that can be attached to the two screws on the backside Included 3mf files have all the right settings to be used in the ElegooSlicer Printed the smaller version, bigger version also included Partly created…
Batch 2 styled filament detector mount. It can freely rotate around the pivot and shift the filament line by 28.5mm. Parts have 1 layer sacrificial bridge layer to make it easy to print. For Batch 3 I modified the base. Enjoy it! Any…
🇬🇧 Description This model has been designed to allow the use of the CANVAS system on the Centauri Carbon 1 , while keeping the printer fully enclosed using the original top glass. The riser lifts the lid to provide clearance for the PTFE…
This is a print in place stand for your extra buildplates for your Elegoo Centauri Carbon or Elegoo Centauri 3D Printer that holds the standard 256x256 sized buildplates. Prints in place, no supports needed 10-20 infill .2 layer height 5…
Also available through the opencentauri CAD github Live interactive model you can link into Fusion 360 on the Opencetauri Docs . Community Centauri Carbon CAD model with many contributions from in the Opencentauri server as well as…
This is the first model I have made or printed myself. I did 3 walls and 15%infill, could probably get away with less. Feel free to remix and make it better. I made this with Tinkercad, so my knowledge is very limited. Added a second…
Removed the text and added Elegoo Logos
Screen cover for the Elegoo Centauri Carbon, available with or without the Elegoo logo.
Centauri Carbon First Layer Test to make sure your first layer is up to standard. The 3MF file is already set in the print bed, so you don't need to adjust it.
MagicShrimp made covers that can be installed on the Elegoo Centauri Carbon to stop debris from getting under the bed.In the second batch of printers the bed mount was changed, so I modified MagicShrimp's design to suit batch 2. You'll…
This spacer helps reinforce the edges of the panel for mounting hinges or providing extra room for an internal spool holder. Recommend knurled heat-set inserts with this spacer unless you select the M3 nut version. If you have never done…
Updates: UPDATE! Elegoo has addressed the issue. There's a possible fix, which they have outlined in a reddit post . This post encourages you to go to the following link and request a new cable. I would suggest that people go and do this…
!!! Important !!! : Be careful if you take the bed to the bottom as the bed will skip teeth in the belt because the bed hits the bearing covers. If you want to use this mod you have to change the Printable height parameter in the slicer…
Purge Waste Ramp and Collection Bin – Elegoo Centauri Carbon 2 This model consists of a guiding ramp and a collection bin , designed to channel and collect purge waste from the Elegoo Centauri Carbon 2 . The ramp guides purge material…
I add borders for a smoother look
This is a gasket for the back of the Centauri Carbon where the PTFE Tube enters the back of the case. Hopefully this will prevent premature wear of the PTFE Tube.
I present you a new top cover for the Centauri Carbon 1 w/Canvas! My design is shorter, only 172mm tall, while still allowing full motion. The stock PTFE tubes length has been shortened by ~70-75mm. The Canvas has been relocated lower in…
A simple back hanging waste system for the Centauri Carbon 2. It uses the existing screws to secure it to the machine. It slides off and on easily, and holds a large amount of poop for those long jobs. I could've cut down on the amount of…
Centauri Carbonのノズルの左側コネクター取り外しジグです。 This is a jig designed to remove the left-side nozzle connector of the Centauri Carbon.
This is compatible with the blade that comes with the Elegoo Centauri Carbon. I made this because I didn't have any PLA when I got my Centauri Carbon and they only give you a print file to print the scraper handle in PLA. It printed great…
Hallo liebe 3D-Druckfreunde und Centauri Carbon Fans! Bei meinem Elegoo Centauri Carbon wollte ich mehr Platz zwischen Druckkopf und Glasabdeckung bekommen. Die im Internet kursierenden Erhöhungen waren mir ein wenig zu niedrig, kosteten…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
Same as the original model but I extended the middle out to allow for 3KG rolls of filament no supports needed Print in PETG or ASA etc The PTFE tubes are not 100% needed but a nice addition. I superglued mine in place after trimming. 20%…
Centauri Carbonのノズルの右側コネクター取り外しジグです。 ペンチで外せますが専用ジグがあると便利なので作りました。 This is a jig designed to remove the right-side nozzle connector of the Centauri Carbon. I designed this dedicated jig to make the process easier and more convenient.
Noticed a hole in the side of the printer when considering airflow and leakage for stuff like ABS so I made this snap-in plug for it. Printed in SUNLU PLA+ at default settings.
Sliced using Elegoo Slicer 1.1.7.3 Printed in PETG, prints in 4 parts. Used to print CF filaments on the Centauri Carbon. The factory path for the PTFE tube creates tight bends that snap the filament. Removing the tube form the drag chain…
Ce nouveau support bobine est plus long que l'original et vous pouvez placer 2 morceaux de tube PTFE pour faciliter la rotation de la bobine Ce modèle comporte déjà des supports d'impression sur ça la partie supérieur et sont à enlever…
The original was slightly modified and the storage compartment was added on top. It is designed to hold various tools, printing plate(s) and stash the glass cover higher when necessary, especially when printing with PLA. This design was…
Enhanced Z rod grease contact bushing caps for the Elegoo Centauri Carbon. These grease cap bushings feature easy application port reciprocals that interface with the stock grease tube originally included with the Centauri Carbon. The…
Combined the tool from @yamikinyucom_3447474 into one tool. I have broken each of these connectors in different hotends during removal and waiting for replacements while having to use a new hotend. This tool works great for my fat and…
Toorack/toolcaddy for Elegoo Centauri Carbon with 3 x 25x3mm magnets to fix it to printers side. I used auto tree supports on buildplate only. Don't know if they are even needed, but slicer made only 4 minor tree supports so what the…
This is a matrix 10x10 to find the best combination of flow and speed on the ironing feature.
One of the biggest drawbacks of the CC2 is its open spool mount design. While the community has already created some great solutions, I felt there was room for a more modular approach; one that doesn’t rely heavily on additional…
A scratch designed Toolhead cover/cowling for the Centauri carbon that is weight and strength optimized. The uninspired name comes from the star in centaurus, and this being the third (γ being the third letter of the greek alphabet)…
Monolith's design, but with hotend space.
YouTube vid: Removing the PTFE tubing from the Centauri Carbon 4 to 1 Hub is RIDICULOUS! Designed this over complicated PTFE removal tool. Consists of 4 parts: Pusher Insert - pushes the hub down all the way until the spring is fully…
I've made my mod interchangeable with Ccraft3D design so you can take your pick of which pieces suit your needs.
There are a few options with this one, mainly due to requests and iterations. there is an option with and without the hinge. there is a v1 and a v2 of each as I didn't like the wobble on the plates. and there is also an option to have one…
This mount fastens to the top M3 screw hole for the wiring harness anchor on the right rear of the ECC. There is a hole for refastening the anchor point for the harness in the model. However, it is not required since the design of this…
================================================== ELEGOO CENTAURI CARBON - TOP PLATE RISER & CANVAS DOCK SYSTEM ================================================== 📝 Overview & Core Details Description: A custom riser that lowers the…
All of the sensor offset mounts I could find were based on the original Elegoo CC design with 2 screws. Lots of people now have the one w/ a flap and 1 screw, including myself. So i made one. Only tool you need was provided w/ the…
Thank you Marko Borsic for the original design. It fits great, and prints well. I've noticed that the stiff 6mm PTFE tube coming from my Polydryer filament box tugs on the adapter, and pulls up the side that the tube goes into. I've added…
Remix uses existing screws. Poop Chute for the Centauri Carbon. The model does not require supports when printing.
I modeled plastic replacement for metal blade, that is added to Elegoo Centauri Carbon. Metal blade is useless, as it is likely to damage surface of build plate. Plastic blade fits into handle that Elegoo provides for printing.
For use with my filament dry box model available here I was unable to include this remix of @Ken226 's great spool holder in the dry box model due to the GPL license conflicting with the CC license so I am uploading it seperately. You…
Don't let the number of files intimidate you, you'll only needs a fraction of them - continue reading and you'll see why there's that many ;) A riser with rolling shutters. It'll provide the best possible airflow while remaining as…
PTFE tube holders.
EDIT - UPDATE 15 August 2026 Based on some feedback, I've replaced the 3MF file with one that contains better plate labels and support blockers / enforcers. The original 3MF file has been removed to avoid confusion. There is a solid…
I saw other cap designs using pascal_lb's as a base, but they all stuck out from the printer, so I remixed my own! This one is flush with the printer and has a little interior handle to twist it on and off.
This is a light clip rail mod for Jesus freaks vented riser mod for the centauri carbon. I have 4 light clip vents included. I printed this in Twinkling Black PLA INFILL 15% INFILL PATTERN Gyroid. It is ultimately up to you and what you…
Overview A purge chute for the Centauri Carbon that uses the original back panel fixings to secure in place, meaning all you have to do is print and fit! The chute has a tab on the bottom to stop the pot from being pushed too far. I…
This riser or low profile extended top for the Centauri Carbon is designed to match the outer perimeter of the machine unlike all the existing variations I found that sit inside the top glass recessed area and give a chimney effect. Just…
This Centauri Carbon panel hinge set is an improvement over our original version. The most significant improvement is the drop-pin feature, which now enables the panel to be quickly and easily removed. Designed for a 7.5 mm spacer. Here's…
This is a remix of the right hinge from MagicShrimp's 270 degree hinge for the Elegoo Carbon Centauri. It is literally a mash of the hinge and the right holder from Julien Mairy's cover and bed holder. I wanted to have both, but they…
A simple printer poop bin with a volume of ca 750 cm³. Full measurements ca 140 x 90 x 70mm. Can be attached to the Elegoo Centauri 2 und Centauri 1. Slightly raised edges to prevent printer poop from bouncing over the bin. Easy to print…
Bleeding guide for the Elegoo Centauri Carbon. This avoids having to go looking for the purges at the back of the machine. It is fixed using the 2 screws located under the purge hatch, so no additional material is required and no support…
Before you grab this one, check out v3.6 . v3 of the internal spool holder. For the most recent compact version with a truncated end stop, I've added 2mm of length. This will work fine for anyone with a 7.5mm spacer or larger. It will…
Mount up to 6.5 cm wide 1 kg spools inside your Centauri Carbon. Print two each of the 5 mm vertical and horizontal spacers for the right-hand wall. You may fit the spool without removing the studs but that will require that the bed is…
Print Settings Printer: Elegoo Centauri Carbon 2 Slicer Profile: Stock / Default Settings Material: PLA (Stock temperature/speed) Layer Height: 0.2mm (Standard) Walls/Infill: Default (Stock) Supports: No (Designed for clean printing…
🚀 Support My Work 🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
I think this is the most needed upgrade for Elegoo Centauri Carbon as it is louder than other printers , especially when printing starts. While this model looked promising, I wanted to avoid support as much as possible. After spending…
This little purge drawer design is very nicely designed and attaches easily. I found the walls were a bit thick so I modified them in Blender to about half thickness. I ended up adding a bevel/rounding effect as an aesthetic choice. Also…
The new Elegoo Centauri Carbon 2 with the 350C print head is out. They changed the location of the poop chute. Luckily you can mirror the model and it will hang from the two screws and open to the left side of the printer instead of the…
Simple Gridfinity hotend holder for the Elegoo Centauri Carbon
Hotend storage box with lid. Printed on Centauri Carbon with Grey Elegoo Rapid PLA+ Elegoo slicer using 0.4 Nozzle with 0.2 layer height.
This is a remix of Craft3D's design. I liked the curved design but didn't have vents so I placed vents on it.
You have to push the cable into the mount, it's very tight I used this cable: Acer 240W https://tinylink.net/Ngt19 I've also added the STEP file so you can adjust for your cable V2: Made stronger and has shorter options this is temporary…
I really love the original model design, but I wanted a possibility to open the top a little bit for PLA printing. With it and the exhaust fan I can print PLA without any issue. You can attach LED as at the original model. Update : I…
Replaces the original threaded version with a ¼ turn twist lock. Moves the spool up slightly and offers reduced rolling resistance for smoother filament feeding. Works with 51 mm center diameter spools Will take a spool up to 65 mm wide…
I got tired of debris (and sometimes screws) falling in the holes around the Z-Rods in the floor of the Centauri Carbon, but I couldn't find any covers for them. I took inspiration from the debris covers for the bed and the Z-axis screws…
I tailored this model to my liking. You don't have to like it, but you can have it if you do. I reshaped the vent slots to reduce unsupported bridging width. Added radii virtually everywhere to smooth the entire look out. Removed…
