304 modeli
Any feedback would be greatly appreciated . Product page here: https://www2.hm.com/en_us/productpage.0812790001.html Nozzle: 0.4-1.0mm Layer: 0.2-0.8 (Recommended) No Supports needed Scale it as you like :)
Wydruk około 10,53 €–12,87 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Full Set for Sale: https://www.printables.com/model/745241-nordic-style-ceramic-vase-home-decoration-full-set Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Wydruk około 21,52 €–26,31 € nettoWstępna wycena jednego wariantu
This is my second ceramic vase obtained from a 3D printed mould The design becomes quite effective. Easier to assemble The plaster mould is not too heavy And the two peaced that I used to assemble the plater pieces together is a very good…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
The gcode file uses a 0.6mm nozzle and 0.5mm layer height.
Wydruk około 2,38 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a container to put my Ceramic Tiles in for my Laser Printer. I made this model on Tinkercad and it turned out great.
Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu
This is the 3D printed PLA 4 perimeters, 20% infill, workholder we used with the nomad carbide milling vice. as seen in this video by yours truly:
Wydruk około 5,24 €–6,41 € nettoWstępna wycena jednego wariantu
Knob compatible with 220Volt 3200 Watt Vanette Ceramic Oven. Remix from knob with Compatible D slot in the back, added a ring with correct number positions as well as the slot for a M3x20 screw to secure it to the post. Unknown if it will…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
Simple holder for ceramic or other small screwdriver for IKEA Skadis
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
I have created these tools with different shapes to model your vases or your paintings with plaster. Group 1 - allows you to create geometric textures. Group 2 - allows you to create vases or cups with simple shapes. Group 3 - allows you…
These gorgeous stamps will take your work to the next level. Enjoy!
Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater). The model is easy to print with or without supports (up to you). Please…
Link for the fan I have used: https://www.amazon.co.uk/JZK-2PCS-5015-blower-Speed/dp/B0C8TDZ7H6 Orientation: As shown above. Layer Height: 0.2mm Walls: 2 Infill: 30% For the assembly you will need: 2 x M3 x 14mm screw for the parts coling…
Just a variation of the fan bracket for ceramic hotend upgrade. I've made this for my SEs but might fit KE as well (didn't check it).
I designed a modern vase in ripped ceramics Style. Easy to print. There are two models available: Vase mode model 3-perimeter model
serrated rib 1mm thick .
Background This is a bat for throwing pottery on a wheel with standard 10" pin spacing. It is sized to fit on the Prusa MK3 print bed (though it must be printed without a skirt). My goal in making this was to create a plastic bat that is…
My idea was to make various ceramics tools based on the needs of the classroom and the teacher. For all of the ceramics tools, I first did an estimate of what the tools would look like in real life (my estimate was 10 x 10). I sketched…
Intro This is a bowl that looks like it was made of ceramic! :-) Super SMOOOOOOOOTH surface….. It is a nice looking piece for decoration or to be used to put your keys, wallet or other small things when you are at home… The magic to…
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 3D view: https://a360.co/2YAnOBE This razor scraper can be used for cleaning 3D printer bed or for cleaning glass ceramic hob and many other things.…
Paw print pattern ceramic roller tool for putting little paw prints all over the place. Check out my other models here 👀 See my other Ceramic Work Tools here 👀 Hope you enjoy and happy printing 😎
Se recomienda utilizar soportes, la altura de capa puede ser 0.28 sin problemas ya que es un accesorio para utilizar al sumergir la pieza de cerámica en el esmaltado y evitar marcarla con los dedos.
velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer
Any feedback would be greatly appreciated. Nozzle 0.4-0.8mm Layer Height 0.2-0.3mm (Recommended) No supports needed Scale it as you like :)
Modelo pensado para aplicar en ceramica, porcelana, masa o lo que quieras.
This model is designed to create a physical reference for clay shrinkage, allowing you to intuitively estimate the final dimensions of your ceramic pieces during the making process. This "shrinkage ruler," created with this stamp, will…
I ordered an Anycubic Kobra S1 Combo, and saw reviews that said the ceramic replacement hot-ends were a decent ‘quality of life' improvement due to the faster heatup and cooldown times. So, I ordered a set of those. And I need to keep…
I am providing two files, I personal used the one without the notch and then cut it out my self. I made the second one with the notch after I found out it wouldnt fit. vent ring can be found on @Conrad_F89, or go to the remixed link you…
If you are using this fan duct for a volcano nozzle on your ender 3 s1/s1 pro, I highly recommend using this longer remix of the ‘ X45 Sprite CR Touch Probe Zero Y-Offset Mount v1.1 (Ender-3 S1 Pro and similar)’, which simply has its two…
Simple form for assisting in the making of square ceramic plates. Form model is 112mm x 112mm x 11mm
Se recomienda utilizar soportes, la altura de capa puede ser 0.28 sin problemas ya que es un accesorio para utilizar al
Double duct for ceramic hotend If you have printed a model, please leave a review and share a photo of the finished part, which will help others make a choice.
Common 4" x 4" square ceramic tile frame and stand. With the popularity of the Norton White Tile method for laser engraving ceramic tiles, this basic printed frame and stand hides the unfinished edge of the tile and proudly displays your…
Simple 90mm and 120mm turntables for painting/carving ceramics. Designed to be used with a standard 608 bearing glued into place. Glue the center to the top side with the stem, glue the outer wheel to base. It's helpful for the base to…
Sello con Cortante Ceramica Galleta Mandala 01 Tamaño 10cm Parámetros de Impresión Altura de Capa 0.15 Velocidad de Impresión 60mm/s Cooler de Capa 100% Relleno Desactivado Stamp with Ceramic Cutter Cookie Mandala 01 Size 10cm Print…
This is a small mold for a ceramic cup that I designed and fabricated. The mold is made from plaster, which allows you to cast ceramic slip inside to create the final cup. A crucial step in the process is preparing the 3D-printed master…
Stone path pattern ceramic roller tool. Check out my other models here 👀 See my other Ceramic Work Tools here 👀 Hope you enjoy and happy printing 😎
A little box for my hotends for the Kobra S1. The lettering on the lid and the base is made with an modifier. Feel free
Supports are required because not all parts of the model will touch the bed (because of the ergonomic design) and the overhangs are drastic. I also recommend printing them with a brim to prevent the parts from peeling up.
Caja con compartimiento para almacenar el bloque cerámico y 6 boquillas
Take your clay and ceramic projects to the next level with this modular Texture Roller Set . This system is designed for efficiency, flexibility, and high-quality results. Instead of printing multiple full rollers, this design uses…
"Pasty Print" for Biqu Hermit Crab (other mounting options coming soon) (I will be developing this model as I print parts and test, with the hope of creating a final model that works reliably works smoothly, along with a non-toolchanger…
This is a remix of @0x53 flat mount for 4010 fan that works with 4020 aswell that is sighly longer to accomodate the shallower depth of the hotend heatsink of the Ender 3 V3 SE ceramic hot end upgrade kit. Needed parts: 4020 / 4010 Fan…
This is a frame for 6" x 6" (152mm x 152mm) ceramic tiles to display them after laser engraving. It's a snug fit with a keyhole slot in the back to hang it on the wall. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
A friend of mine was missing some of the inserts for her ceramic Christmas tree, so I went looking here and found something that was close to what I wanted. A few tweaks produced this. Print in vase mode with 2 bottom layers, 0.2 mm layer…
This guy looked like he was enjoying a nice cup of joe at the museum so I decided to capture him. This urn can be found at The Field Museum in Chicago, IL. "Ceramic urn, Zapotec (AD 200-800), Oaxaca State, Mexico" was captured using 123D…
Our class created a variety of school improving projects for our ceramics class. Some did roller patterns, spatulas, texture rolling pins, and ribs. I choose to do ribs and talked with our schools ceramics teacher, Mr. Schifone, to create…
My idea was to make a texture sheet that you could mold clay for our ceramics class. My first idea was to make a wood texture to help make wood texture. To make the shape I used the boss extrude tool to make the shape go along the whole…
Pattern roller I made when I needed some ground effects. Note that theses were used for small pieces, the roller is about 5cm wide. Feel free to enlarge as needed. See other ceramic tools I've made here .
I have made a whole rib set made for pottery works very great and i love it
A bat frame to hold a 6" tile on a potter's wheel. I use 6", unglazed, quarry files. I liked the design by Pope_Sythe but I teach and needed a simpler for students: Eliminate the need for a pad of clay under the tile: Added an inner ledge…
this ring Helps the dental technician in applying stains
Brick pattern ceramic roller tool for creating fine detailed brick patterns. Check out my other models here 👀 See my other Ceramic Work Tools here 👀 Hope you enjoy and happy printing 😎
Ceramic Work Tool Antic
Standard for ceramic tiles
Any feedback would be greatly appreciated. Full Set for Sale: https://www.printables.com/model/745337-simple-ceramic-vase-home-decoration-full-set Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
This is a frame for 4.25" x 4.25" (108mm x 108mm) ceramic tiles to display them after laser engraving. It's a snug fit with a keyhole slot in the back to hang it on the wall. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
A mount for an affordable CHC hotend from Aliexpress to mount on the Voron 0.2. Needs to be printed in ABS/ASA or comparable. A bit of manual work is required since the top needs to be cut off where the heatsink gets thinner (see second…
This is a mold form for a 1-piece ceramic slip mold. It is customizable in OpenSCAD with many parameters to control the star-shaped polygon at the top and bottom, the roundness of the points, the shape of the side (round, straight, or…
The handle of one of my ceramic knife broke. I designed this one to replace it. You may want to print the "imprint" first to check if it fits your knife blade. I set a print pause at 8mm to embed the blade. Take care about the handle…
This was specifically designed for clay that has a 13% shrinkage rate. The true dimensions of the cutting portion of the cutter is 6.78 in (17.22 cm), so that the finished tile is 6 in. It is 11 mm tall. I designed this and then realized…
Longer adapter for installation with ceramic hotend. It is mounted from the inside on m3*14 screws. There is a side mount for the fan wire. If you have printed a model, please leave a review and share a photo of the finished part, which…
A small little spinner that I made for a ceramics class I was taking (highly recommend, even if you're not intending to get a art major). This spinner is 50mm in diameter (about the size of a roll of scotch tape). Perfect for cups and…
4010 turbine fan mounting for double duct for ceramic hotend
Height 15.7cm - diameter 3.6
Lesson Plan and Activity: With a partner, you will design a “3D” ceramics tool using Solidworks. You and your partner will have the same design which meets the constraints below, and you will EACH use Solidworks to create your design.…
4 designed and printed pieces placed in a base. These are pieces for rotating ceramics, and are used to give a jar the geometry of the design profile. Each piece has two profiles. In the attached image you can see the result obtained with…
This is a pretty specific design for my needs, but this allows a Clean Hydration ceramic lined insulated mug to fit nicely in a Tesla Model 3 cup holder, with a cup holder insert in it. The included FreeCAD file would be VERY easy to…
velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer
This is a high-resolution 3D scan of the ceramic bead included with the Tom Sachs Nikecraft GPS 'Bricolage' . I didn't want to lose or break the original, so now I've got an endless supply of replicas! 3D models: ISRU_Bead.stl - Original…
* Update 2021-11-01: * I added a 2nd version that's thicker everywhere, in case you want a tougher and tighter fitting lid. :^) My wife loves La Fermiere yogurt, so we're constantly throwing out the small ceramic jars they come in. I used…
Stamp wheel from the Ceramic Tiles #9 This digital 3D printable model is designed for creating textures in clay, polymer clay, EVA foam, and other materials. We want to make more models like this. If you want to let us know what kind of…
Replacement handle of ceramic knife. Compared to the original handle was enlarged the bed to store the blade. Adjust the blade into the new handle with epoxy (twos-component) adhesive. Print Settings Printer Brand: Prusa Printer: I3 MK3S…
THIS IS STILL A WORK IN PROGRESS, ITS NOT FINISHED YET!!
These ceramic stamps have been designed and printed for "Mão Art Studio". These are for stamping the logo on the ceramic pieces that are manufactured. The first design is the studio logo with its drawing, and the second design is just the…
simple modified base for ceramic tiles (10x10cm, or 4,25x4,25inch) with an (extra) depth of 15mm (0,6inch) or a normal depth of 9,5mm (story tiles) printed in PLA at .2 height, 10% cubic infill.
Recommended Print Settings Printer: Any FDM 3D printer Rafts: No Supports: Yes (In tree are better) Resolution: Super Quality 0.12 (Actually the one you prefer) Infill: 20% or higher Filament brand: Doesn't Matter Filament color: Doesn't…
Makes an imprint of cool Greek repeating pattern
A little box for my nozzles for the Kobra S1 with upgraded hotend. The lettering on the lid and the base is made with an modifier. Feel free to do your own or use mine within the *.3mf-File
These tools have different purposes.
Heavily inspired by this tool on amazon: https://www.amazon.com/Doublefill-Pottery-Thickness-Plaster-Ceramic/dp/B0DT62RD1M Modified for 3d printing, handle should thread in easily. All press heads are 3.5" or 7.5cm tall, each head file…
Simple spinner in a few styles to fit your needs! Requires a 608 bearing.
Probably needs supports everywhere, layer height about .16 should be enough.
A fuse puller/placer for 5x20 mm and 6x30 mm fuses (glass/ceramic). Model The tolerances have been tight enough that the fuses snaps into position. Printing I have printed these in Prusa PETG-CF (Carbon Fiber) with hight strength in mind.…
Random circle pattern ceramic roller tool for creating random circles. Check out my other models here 👀 See my other Ceramic Work Tools here 👀 Hope you enjoy and happy printing 😎
A cookie or clay cutter in the shape of the aperiodic monotile einstein shape, published by Smith and friends in March 2023. Smith, D., Myers, J. S., Kaplan, C. S., & Goodman-Strauss, C. (2023). An aperiodic monotile. arXiv preprint…
These are roller guides for the correct spreading of ceramics of different thicknesses. Commercially available sizes are 3mm, 5mm, 7mm, 10mm and 12mm. Here I'm providing you with all sizes from 2 to 12mm. See my other Ceramic Tools here
Adjustable E27 ceramic bulb holder. The dimensions of the ceramic holder are in the pictures. Both ball joints are reinforced with a bolt inside. The ball has 20mm of diameter. Supports are only required for the nut hexagon recess (as the…
velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer
This durable plastic mount is designed to securely hold a standard E27 ceramic light socket in place. It provides a stable base for mounting lighting fixtures on walls, panels, or other flat surfaces, while allowing easy installation and…
Random triangle pattern ceramic roller tool for creating random triangle patterns. Check out my other models here 👀 See my other Ceramic Work Tools here 👀 Hope you enjoy and happy printing 😎
Ceramic roller with wave pattern 150 mm wide and 40 mm diameter. See my other Ceramic Tools here
Slight remix Print with whatever and no supports needed Seems my printer needs some tweeking, noticed some banding
Add a touch of rustic charm to your 3D printing projects with this speckled textured ceramic planter tile . Designed to mimic the organic look of hand-crafted ceramic,
My wife inherited two older ceramic xmas trees and she ran out of bulbs so I made here some new ones. There are two files a larger base one and a smaller base one. You just have to glue the pieces together for easy printing. Category: 3D…
These are dies that should work with most 4in ceramic wall mounted clay extruders similar to this one https://www.northstarequipment.com/Extruders.htm . Printing Settings I printed mine out of PLA with 3 bottom, top, and wall layers, 35%…
This is 3 cups and one mug that I designed I made 3D printed PLA molds and use if for preparing plaster molds that my wife used to build ceramics object This one are not so difficult to do. If you want to try I recommend starting with…
Ceramic Container With Flower Motif
I designed an adapter for the Supernote Ceramic Nib Refill to work with a Tactile Turn Ultem Pen. This will allow you to use the refill in the Tactile Turn Bolt Action Short pen. The adapter prevents the copper coil from coming into…
![STRETCHED Taurus V4 Cooling Duct for Volcano Nozzles [for Creality Sprite Extruder, Dual 5015 Fans, Ender 3 S1/S1 Pro/S1 Plus (Stock / Spider / Ceramic)]](https://media.printables.com/media/prints/651324/images/5137287_00b253b9-b040-44b3-9428-07f481b627bc_785c15d9-bb82-46fd-a552-3bee22b6d0d9/stretched-taurus-duct-cover.png)
