3679 modeli
Inspired by this 3D Print by user option8 in 2015. I didn't like the 2 part construction and it did not fit my watch so I decided to update the design. Being a single piece means it feels much heavier and more solid when handling. There's…
Also tested with other charging ports Inspired by the box openers
Charging stand for Samsung Galaxy Fit 3 fitness band. While removing charger from the stand push it through a hole. PLA/PETG suggested. Place on a side with cable groove and use organic supports.
Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…
Bedside charging station for your phone, Samsung Galaxy Watch 4. I have a Galaxy S9+ but it should work with most phones. This may work with other chargers also. The Watch charging base is 33.5mm wide x 9mm deep.
Charging Stand for Pixel Watch 2 & 3 Easy to use with the original charging cable of the Pixel Watch 2 & 3 Note: you'll need to mirror the model for the left wrist, as I wear my watch on my right wrist. Print settings: 2 perimeter 0,2…
This is made for the new Google Pixel Watch 2 charger. This will not work with the first version Pixel charger. The insert for the charger puck is snug, press firm to seat the puck into the receiver so that it will be steady for placing…
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
I was pretty disappointed with the RYOBI 1800W Powerstation. It didn't come with MPPT Solar charging or even Pass-Thru charging. I was curious if this was a limitation of the 40V battery or just the Power Station. After some quick tests,…
Nothing/CMF watch 2 Pro charging dock/stand
Based on the idea I found in a German forum, I have created an optimized version of the Qi charging tray for the CUPRA Born. If you are receiving messages that your smartphone cannot be charged by the charging cradle of your Born, this…
A modular charging smartphone stand for the IKEA LIVBOJ wireless charger pad. The phone can be held in both portrait and landscape orientation with the charging pad still placed in the middle of the phone. The cable runs in a slit in the…
Inspired by the Pixel Watch Charging Stand from dtphantom I created a similar design for my FitBit Charge 5. Printed in 0,1mm for a smooth surface. Needs a little support. Update 22.12.22: I added a version with a weight in the base. Just…
I've made a charging stand for a Huawei Smartwatch GT 2 Pro. Just put them together, No gluing, No screwing! Print instructions Model created with tinkercad Printed in Prusa PETG orange 06/20/2023 I created a new top (Alza). The wider USB…
Make Your Own Custom Charing Station using these 3D Printed clips Go have a look at your current charging setup now, I bet the wires are all tangled! I have included designs for a basic charger station that has cable channels on the back.…
Convert your Bosch eBike battery charger into a convenient wall-mounted charging station. It keeps the charger where it is needed and provides a tidy and compact solution for all its cables. Moreover, if combined with a plug-in timer, it…
This handy cable organiser is perfect for travelling or when you are simply tired of constantly untangling cables. Strengths: sturdy design fits any cable (fits 2m long 4mm thick cables easily) Assembly instructions: insert cable in its…
These here are some simplistic Charging Bays for my Index Controllers and also my new VIVE 3.0 Trackers. I didn't like how all my VR Gear was just laying in my Drawer so i decided to get it all a bit more Cleaned up ^^ I Recommend using…
A stylish dock for your Oneblade QP2724 with snap in charging feature - keeps your OneBlade ready for action anytime!
This is another Pixel Watch holder that allows you to charge your watch upright, with the bezel facing left or right. I wanted to design something that was sturdier than the cliffhanger, but still had a bit of flow to it. Update 2/9/25: I…
Maturity: Very good. 8 prototypes. In use since 2024/04. Personally I fixed my charger with some double-sided tape inside the charging station. Accept charger with the sizes: Up to 150x30mm Up to 75x40mm Slot space is 21mm. Printing…
Your Fitbit charging cable for the SENSE will fit in this stand. A save place during you are charging the smartwatch. I have printeted the stand with PETG and have used some support structures (have look at the pictures). I have designed…
MagSafe Charging Station – Put Your Phone to Sleep in Style! Product Description: Introducing the Phone Bed , a charming and functional MagSafe charging station designed to give your phone a restful “sleep” as you recharge overnight. This…
Travel charging stand for Samsung Galaxy Fit 3 fitness band. Attachement for easy and compact charging with wall charger. Suggested print orientation seen in the picture. Use organic supports.
Give your phone some time to rest and recharge. Story Ever since I saw ThePhonePillow by HpInvent, I wanted to remix it into a wireless charging pillow. Alas, HpInvent's is using a very restrictive closed license, so I would not have been…
Charing stands for Philips S9900 series shaver. Put a shaver on the stand, and you can charge your shaver. If you want to travel, you can easily disassemble and take out the charging cable from the stand. It fits with the Philips S9900…
A charging base for the Xiaomi Watch 4 where you can use your original cable. Due to the particular inclination required for printing, you have to activate supports from print table, you can use an infill of 10-15%. Once you have printed…
This is a remix of Avise's Galaxy Watch5 Charging Stand With Removal Hole to medium height, with a longer base, and tighter cord grip. The height is in between the original and the tall model, with the highest point being 120mm.…
A RFID DROPLET CASE for your public car charging tag. I created this small case to encase my RFID charging ‘droplet’ tag. The opening for the keychain broke after a few weeks of usage, so I needed to fix this. This case is a simple print…
Store your charging cable safely on the wall. Just needs two screws for mounting.
Kingdom Come-inspired OneBlade Stand Tower General Information The original charging cable is integrated into the tower. The cable simply needs to be threaded through the parts and pressed into the designated grooves, then the cable is…
I was looking for a charging station that holds both my phone and watch, so I tried and remixed the one from Meningitix. It's a sleek and clean looking one, just like I wanted it to sit on my nightstand. Though it was made for the bigger…
A simple phone stand with bultin wireless charging. Print instructions Things you'll need Printed Stand.stl Printed Rear cover.stl Usb charging cable. Wireless charging panel. ( Aliexpress ) Hot glue gun or double sided tape. M3x6mm bolts…
Now includes Belkin 3-in-1 charging stand option Now updated for Magsafe This is my Modular Bedside shelf. Designed to slot over an existing Ikea Lack floating shelf bracket. Pictured sanded and painted gloss grey. I've been using it as a…
Desk variant of my “ Charging butler / iPhone + Watch + AirPods Pro wall mount charger ”. Charging butler / Apple iPhone, Watch, AirPods Pro desk charger with Apple “Standby Mode” support in iOS 17 and with integrated 65W power supply to…
Car holder for Google Pixel 3A with charging. The model includes only the phone-holding part, but has mounting holes compatible with Brodit mount system. Print instructions It's a two-part print, the small part is to hold the charging…
S26 Ultra phone charging stand provisioned to accommodate 56mm x 5mm 25 watt quick chargers. Added audio guides to bottom for better sound broadcast and microphone reception. Also contains a couple pen/marker holding provisions at the…
Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…
A wall mount for the Hoto vacuum cleaner with a small hole in the bottom to fit a USB-C cable. I used a glue gun to hold the cable, then put the left over cable in the base and mount it to our kitchen.
We know that the better the alignement between the charging pads, the better and faster the charging, with this in mind, and tired of missing charges because of misalignement of the phone over the pad, I decided to create a pad that…
The holder has a capacity of up to six devices, with a width of up to 2.1 cm. The power supply in the base can have dimensions of up to 9.9 x 7 x 2.7 cm (L x W x H), as it is the case for the Anker PowerPort 6, which I am currently using.…
Features This charging stand holds your phone in a convenient location by attaching it to the charger. The foam lined phone holder will never damage the phone and makes it easy to insert and remove it. There's also a little clip on the…
Keep your fitbit charge 5 charging cord organized.
Simple charging base for Colmi i31 SmartWatch
Overview This custom-designed charging dock combines function and minimalist aesthetics, tailored specifically for Apple MagSafe-compatible iPhones and the Garmin Fenix 7/8 smartwatch. The dock consists of two interlocking base…
Motivation I purchased a Thermoworks RFX Wireless Probe Starter Kit and wanted a dock to efficiently store and transport the probes in their charging blocks between the kitchen and my grill. Solution Design a custom Gridficiency-based…
A stand with a cutout for the charging puck(?) that comes with the Carbinox X-Ranger Watch (https://shopcarbinox.com/products/carbinox-x-ranger), designed to be printed with minimal supports while still allowing for the watch strap to sit…
Intended to be FDM printed as a single piece with no supports required. Designed for continuous watch bands but should also work with any watch band as long as the band width does not exceed 24mm otherwise the lower strap will interfere…
Minimalistic Dock for Apple Watch - version 2. Suitable for both USB-A and USB-C type chargers. Model was tested with genuine Apple chargers: plastic and metal one. Both have similar diameter which is 27.8mm and 27.7 mm, with the depth of…
Modèle 3D d'un support de charge pour la Samsung Galaxy Watch 4 et 4 Classic. 3D Model of charging station design for Samsung Galaxy Watch 4 and Watch 4 classic Paramètres d'impression / Print Settings Marque / Printer Brand : Artillery…
This is a super simple to print charging stand that utilizes your MagSafe charger. No supports required, and fully modular to fit your phone (as long as it has MagSafe). Update 8/5/23: Support for older style Apple Watch chargers! I have…
Dock. Charge. Tidy. A charging stand with built-in storage for excess cable — for a tidy desk or bedside table. Tidy cable storage inside the dock. Size-specific versions for your Apple Watch. Easy to print without supports. Choose your…
This phone charging stand prints on it's side with no supports and features a cool knurled pattern on the backside! It provides a perfect viewing angle for watching YouTube or checking your email! * Check out the new side accent version…
This stand will only work with Pixel Watch 1, for Pixel Watch 2 please use this stand: https://www.printables.com/model/615266-pixel-watch-2-charger-stand This stand includes a cutout to route the wire so it's not visible. For best…
Playstation Portal Docking charge station. This is a remix of the Gord Allott PlayStation Portal stand, i loved the design, but wanted to incorporate slots to make it a charging docking stand. I redesigned the model to allow the charging…
Samsung abandoned the charging stand for some reason and with recent watches delivers a small puck shaped magnetic charger. This can be annoying with some styles of watch straps so I made a simple stand to hold the charger. Print the…
Based on thing from wendsday
Credit for this design goes to https://www.thingiverse.com/jburd/designs I simply added the cable tracks on the back. I also added an addition file with and extension to support a phone if it isn't magnetic (tested with iPhone 11 and it…
A charging stand for the quest 3 which securely holds the headset and both controllers. Also has a slot to put the charging cable through to keep it in place when not in use. Headset is tilted up to reduce the risk of sunlight entering…
I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…
I really appreciate you if you can consider a coffee for me if you like the design! Important - Non-Commercial (Updated on April 10, 2022) Version 2 This is a second version of my original Fitbit Sense & Versa 3 Charging Cradle I…
This is a remixed/edited phone stand that I configured to use at my desk for my iPhone XR that has a thick case on it - the original just fit the bare phone without a case. Widened the body a little too for support. Printed on my prusa…
Makes your apple watch look like a gameboy when charging. Print upright with supports as needed.
Update: 26.07.2024 Added “cmf watch pro 2 stand 0,2mm” with a slightly larger opening for the connector. A charging Dock/Stand for the cmf watch pro 2 Printed at 0.2mm layer height in PLA. Tree supports used for overhangs. Not sure, if…
This is a case designed for the new AirPods Pro Generation 2 I included three different files. The first one is for flexible filaments only, as it connects the two halves together. The other two files are just the different halves of the…
This is a charging station for an Apple Watch SE. It is easy to print and the charger fits inside the stand snug but not tight enough so that it will break if removed. Revision 2 has added the feature of a chamfered hole in the back to…
This is a charging stand to use with the Apple Watch charger that comes with every Apple Watch. Tested with an Apple Watch 3 and charger. The cable groove should be snug enough to hold the charger cable in place, while routing it under…
Allows you to charge the AirPods Pro in the Tesla Model 3 wireless charger without slipping :) Works as an MMU print, or single color!
Samsung Galaxy Watch 4, 5, 6, 7 & 8 charging stand printed to hold charging puck. Just insert the puck into the location and run the cable along the tracks. Depending on your print settings, the puck will be a snug fit. You may have to…
Samsung Galaxy Watch 5, 6, 7 & 8 Pro charging stand3d printed to hold charging puck. Tgis is for the orginal charger from samsung. Often arftermarket chargers are a different dimension. Just insert the puck into the location. Run the…
*/update: I added two more versions. They are both smaller than the original and have one single solid hook. This makes it stronger and it can be printed without supports, and I never used the hooks individually on the original version.…
This is a remix of neyth_makes PS5 Controller Clip. I trimmed it down and made a few modifications to hold the controller more securely. I also added a little cut out at the top to hold the USB charging cable. This is my first time…
This cable holder attaches to the hook on the side of the trunk in the VW ID.3, ID.4, ID.5, and ID.7 . Simply hang your charging cable over it for easier access and better organization . NEW in v3: I added a click-lock mechanism that…
I was inspired by the design of Lindh3D 's “Type 2 cable holder”. But I didn't like the idea to print it with support. Also I thought it could be improved for less material use and better mounting. So I went on to design my own version…
My design for a stand that holds both the Apple iPhone MagSafe and Apple Watch wireless chargers so you can view and charge both devices at the same time. It holds both chargers flush with the front face of the stand and features a groove…
This is for the new USB-C charger that comes with the galaxy watch 5, 6, 7 and 8. The picture is of the regular 45mm watch (not the pro, although my strap is from the pro edition). I believe it will easily fit the pro as well (46mm)
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I was noodling around with organizing cables and came…
A simple small print (takes about 10 minutes) of a small tool used to clean dirt and lint out of the charging port of your phone. If you're like me and keep your phone in your pocket, the charging port is inevitably going to catch some…
Includes Hexa, Circles, Triangles and Plain patterns for extra fun. Other versions: Apple Watch charger : Same pattern but for the Apple Watch charging cables Introduction Charging Cable Winder Organizer – the perfect solution for…
The stand is designed to hold all versions of the Apple Watch from the SE to the Ultra. Accents on the front & back are printed separately and can fitted in after being printed. Recommended that you use my print profile, but if not make…
Stand for OnePlus Watch 2 / 3 to hold the charging puck and the watch during charging. No support is needed if you print with the back against the bed. Printed with PLA, 0.24 resolution and 15% infill. UPDATE: I created a mirrored version…
Change log 2025/01/01 Added STEP and Fusion 360 source files. 2025/12/08 Added v10, only change is 5mm taller walls NOT for commercial use, if you want to sell these please get in touch. The charging cradle/puck prints with no supports…
I modified a version for the miband 7 found here but the author remove is design so i can't create a remix. Layer height 0.15mm for the bottom and 0.3mm for the top. Nozzle 0.6mm. Pla no support.
Phone charging dock. It was made to fit Type C cable. Little bit of hot glue will be needed for securing cable in place. Type C connector fits pretty snug so no glue needed there. I recommend to use sticky pads under the phone charging…
Remixed. I simply added the PS5 Logo via Tinkercad. Printed with my now retired Anycubic in white PLA, brother in law loved it. Full credit goes to odbo on thingiverse, it's a remix of his plain charging station !
A remix of: Oral B Toothbrush Double Charging Stand Holder by Fresh3Design However, I removed the second toothbrush holder, as one would be on the charger at all times, and used that space to hold the brush heads (we like to let these…
A phone stand with space to plug in a bottom charging cable with a charging dock for the Samsung Galaxy watch 4 in the base. Ideal for bedside table charging. Phone holder takes a phone with a fairly chunky case. The charging cable for…
Remodeled stand for iPhone 14/15 pro max. Print on side with iphone stand, use support. Recommendation : 5 perimeters, 25 % infill.
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.2 - 0.28 Walls: 3 Infill: 10% Material: Brand: Kingroon Material: PLA Color: green printed on Artillery Sidewinder X1
Samsung Galaxy Watch 6 charging stand 3d printed to hold charging puck. The new design was developed from my Samsung 4 & 5 Stand. The new watch strap design on the watch 6 requires more clearance. The stand is slightly wider to strengthen…
Lint Lifter! A handy tool to clean the charging port on your phone, laptop, or other electronic device. This is a useful tool that prints in about 8 minutes! Inspiration I printed the tool from fifindr on printables, and I thought it…
German Dies ist eine Ladestation und Wandhalterung für Bosch PowerTube (+ Smart) 500, 625 und 750er E-Bike Akkus in horizontaler und vertikaler Ausführung, sowie mit hinterem und vorderem Kabelauslass (die Version mit vorderem Auslass ist…
Simple iPhone and Apple Watch stand that holds both the MagSafe charger for any iPhone 12 and the standard Apple Watch charger. Both stands are tilted 15 Degrees backwards which allows routing the cable inside while still achieving a…
UPDATE: 03/26/2021 Added a “No Shelves” STL for those of you who want to solely rely on the magnets. This is a remix (the original is here https://www.thingiverse.com/thing:4655842 ), Thingiverse isn't finding remix links anymore. I am…
This dock comfortably fits a Yoto Mini 2024 edition player with a silicone jacket. It also features a two-tiered storage compartment for cards and a channel that runs through the dock's underside to keep the charging cable neat and…
Remix For a 40mm Model
https://www.instagram.com/p/CxC2cuXtt8K/
Could maybe help somebody with arthritis rack the slide but I mostly made it for use in a Recover Tactical brace. Tested in PLA+ printed upright and feels pretty solid. Personally, I use the left side handle. Fits PSA Dagger slide,…
Simple to build PS5 controller charging dock that only needs 2 USB C cables and 4 M4 screws, built in fusion 360, easy print that doesn't need support material and simple to follow instructions, compact and elegant design that will look…
This compact charging dock keeps your devices organized and charged while still having a sleek, modern design. It has 4 slots for charging multiple devices at the same time, including smartphones, tablets, and e-readers. Each slot has…
![#0195 Charging Cable Organizer [Multiple Sizes]](https://media.printables.com/media/prints/1167729/images/8797425_e01454a6-8f70-4158-87bb-164bded8b240_40e80181-6dde-4f5d-8a71-7f370698d27a/rl-20250127-015.jpg)
