1042 modeli
This is my take on printed anchors. I designed them for use with XPS foam from which I made an enclosure for my 3D printer. In combination with wood screws an washers they can be used to hold together foam boards or mount things like…
This is the anchor handling tug, roughly modeled after an 160 ft anchor handling tug. This model was developed with play in mind. These tugs are used in open water to move ship or oil rig moorings as well as general towing. It has a blend…
This is a better blower shroud with double anchor points preventing it to sag. It is also a bit larger to prevent it from melting. Print instructions ABS 0.2mm layer hight with first layer at 0.3mm 100% infill Support under the extending…
Minimal remix of the ground hook by 3D_Onkel. Remodeled to be printed flat for optimal orientation of the layer lines against expected forces. Uses less than 50% of the original material. Safely anchors to the ground due to rehooks.…
I wanted to have a zip tie anchor which can be fixed with a screw, so I created this one… Printing Material: PETG/PLA Layer high: 0.20mm Infill: 100% Supports: No
This wall anchor helps you to attach your furniture to the wall to keep it in the right position. Important note: this is not intended to be a safety device. Note: the cover photo is upside down to better show how it works. Design…
Overview This is a rugged, 3D-printable anchor tab bracket designed to hold latch bars, tie-downs, cords, or carabiners in place. Originally designed as a keeper for a barn door latch, it's proven useful as a universal mounting point for…
wysokość z podstawą około 16,3cm szerokość około 14,7cm wymaga kleju do montażu (np. superglue) Włóż łączniki do jednej strony, następnie sklej obie strony ze sobą i przyklej je do podstawy Do drukowania elementów logo polecam użycie…
This is a wall anchor for an Umbra Twilight curtain rod (tested on the Double Blackout version) with wider 32 mm spacing between the screws. Design features This is designed to fit into the slot on the curtain rod where the manufacturer's…
Embrace the beauty and strength of the high seas with The " Anchored Elegance " Door Stop. This unique design takes the form of a classic anchor, a symbol of stability and maritime adventure. Crafted with attention to detail and…
In our case we already had a secure nail in the wall where my wife wanted to hang her violin, and did not want to drive two screws or anchors into the sheetrock. I would recommend ensuring that the nail you use is directly into a wall…
A couple simple velcro strap anchors, #6 screws. The single sided mount idea really didn't work out that well for my use case, it ended up rocking back and forth against my paint. So I did a two sided one that works in any orientation.…
My buddy's landscape lights kept shredding the original spike that keeps them in the dirt, so I remade the original one a little more beefy. The fitting is ½" NPT, so I just made a plus sign shape with a gap for the cord. Pretty straight…
Anker Netzteil Halter / Anchor power pack holder
This is an anchor for fixing the Prusa i3 printer onto the shelf. After you mount the printer, rotate the anchors 90 degrees, and the printer is locked. I'm creating an enclosure for the printer (not completed), and I want to fix the…
The assembled unit is an insert in music folders. It is used to hold and organize original sheet music for singers in choirs. The sheet music holder is made up of two parts which can easily be printed on a small print bed. They fit…
Low-Profile Speaker Anchor (Desk Mount) for Altec Lansing ADA880 Tired of your speakers slowly drifting across your desk every time the bass hits? Trying to turn them on and sending the speaker into a twirl. This simple, low-profile mount…
Drywall anchor, easy to print
Anchor that screws into drywall, with internal thread for 8-32 bolt. Simply drill a ¼" hole in your drywall and turn the anchor in with a Phillip's screwdriver until the end is flush with the drywall. The threads in the center hole accept…
MY NEW DRYWALL ANCHOR INSPIRED BY https://paulbhardware.com/snapskru-drywall-anchor-8x1-1-2-snap30011 I ADDED A BIT TIP TO IT AND IT IS ALSO DESIGNED TO HAVE A WIDER OUTER RING TO MAKE FOR A TIGHTER FIT TO THE WALL. PRINT WITH PETG AND AT…
This zip tie anchor is a redesign of PeterEllens' version ( http://www.thingiverse.com/thing:24187 ) but I've made a little change so that it prints easily without supports. I've also included a small notch in the bottom to make it easy…
Expands as screw is inserted to keep it snug in the drywall. No supports needed. Recommend printing at <0.20mm layer height.
[English] I used the chain anchor 2hole design, closed the hole at the tip and enlarged the anchor a bit because I didn't like the designs or the just didn't fit. It includes a M12x1.5 thread to be able to attach a PG7 cable gland. Just…
Neue Version Rigipsdübel mit Spitze und Stabiler. Für andere Größen, in Breite und Länge skalieren. New version of plasterboard dowel with point and stabilizer. For other sizes scale the width or length
These were designed to have a flat back, thus make them mountable on flat surfaces using the appropriate adhesive. The height as it lays on its back is at 6.5 mm. The width is between 102-115 mm. The Length at 176 mm. I recommend the…
There are many types of commercially available drywall anchor. However, most of those designs don't perform well when 3d printed. So rather than recreating a design optimized for injection molding and adapting it to 3d printing I decided…
I recreated the design of well known [BRAND NAME] plastic anchors, making one side of the thread flat for easier printing. I used 100% infill to maximize strength, but you might achieve sufficient durability with a lower infill setting.…
Designed to be able to securely screw heavier objects onto the pegboard. Takes a bit of force to insert and tightens pretty well when a 3mm self taping screw is added. Can also be locked by pushing in some 1.75mm filament. Comes in 1, 10…
Used like staples to anchor light plants to the substrate. Designed for use on small gravel but might work for others as well. Print with 100% infill (solid) so it doesn't float, then use it to clip down plants like guppy grass or java…
The guitar needs to have 48mm neck. Model was 3D printed with 15% infill using PLA material. To mount it on the guitar, four zip ties are needed, each with a maximum width of 3.5 mm.
What about making something light and buoyant that is actually a nautical symbol of something that is heavy and certainly not meant to float ☺ I designed an anchor to be used as a float / buoy for your boat keys. When going out on a sunny…
One of the tricks I like to use in organizing my tools is to attach things to pegboard using wall anchors in the holes to accept screws. This doesn’t always work as well as I would hope. Since pegboard is usually 1/4″ thick or thinner,…
Center-bar chain, also known as non-fouling anchor chain. I noticed there was no models for it so I made as large a piece as would fit diagonally on my printer bed. I've printed it full-size and at 75% reduction. Both worked fine. Print…
Tools that i recommend: Heat inserts - https://amzn.to/4c7F1W2 * Snips - https://amzn.to/41RGPO4 * Filament that i recommend: GEETECH PETG - https://amzn.to/41MJCbn * Links marked with (*) are affliate links, consinder using them to…
A very nice whistle with three well adjusted chord tones. Be careful, it's very loud!
Une ancre de bateau pirate avec sa chaine pour agrémenter le décor de votre aquarium. 2 fichier présenté afin de facitité l'impression. Celle donnant de meilleur résultat est l'ancre avec la chaine droite à imprimer en vertical.…
Thule Fold Lock Anchor 40107011 For Urban Glide 2, Glide 2 a Urban Glide 2 Double.
The 3mf file is including a modifier for changing infill. Because the anchor is leaning to the left the right side needs more infill.
Fidget Anchor – Print-in-Place Fun! ⚓ Set sail for fidgety fun with this print-in-place Fidget Anchor ! The fully articulated chain easily snaps into the anchor, while the other end features a free-spinning loop with a bearing and spoke ,…
Description The “Stubbie” design by LD.P worked really well, but in common with the commercial plastic anchors I was getting breakages and No. 8 screws tended to strip out the anchor. So I set myself the following design goals: Should be…
Wall plug aka screw anchor aka dowel to be used with attachment of a screw in porous or brittle materials. There are many forms of wall plug, but this one fits best with a concrete wall. The original design is rather small size, as that…
I'm running out of such parts all the time and so I've created it by myself and printed it with various left-over materials. Works best with some softer and not so brittle materials, for really strong mounts I recommend Nylon or other…
Post a make if you print this! :) Seeing our creations out in the wild is inspirational knowing it's helping other folks and encourages creators to put more out there. Needed a velcro anchor. Designed these and mount with 1/2" #6 wood…
simple wall plugs in sizes from 3mm (too small probably no use but it prints fine so why not lol) up to 10mm. I’ve used them for a few shelves with no issues, but I wouldn’t mount anything too heavy or expensive since 3D-printed plugs may…
A zip tie anchor with a srew/nail hole I made for my friend.
Anker zum drucken oder fräsen / Anchor for printing or milling Video mit Erklärung:
A drywall anchor integrated into the countersunk insert for the honeycomb wall system Scaled up the original drywall anchor model to use standard drywall screws as the original model was too small Photos are of 33% scaled, they work but…
Drywall anchor to hang light objects on drywall without a 2x4 stud. Size your screw so that it digs into the top hole, and will split the anchor as it is screwed in. Drill ¼" hole for the anchor, use #6 size screw 0.2mm layer height with…
My kids had been playing pirate in a laundry basket for days, and then complained their vessel was drifting off due to the lack of a proper anchor. Print with plenty of perimiters, as unavoidably, huge and heavy things will have be hooked…
Beach umbrella sand anchor Needed a sand anchor for my beach umbrella. Picture from the hot sand on a beach in Spain. Fits umbrella poles up to about 24mm (the hole is 25mm but I would expect some expansion in the printing process). How…
Just another ziptie anchor - base is 20 x 20 mm. Three versions for different mounting options - using adhesive or screws. If you really like the design and/or just want to appreciate my work and time spend, you can buy me a coffee .
print with petg and use a drop of adhesive of your choice to combine a pair.
I needed an anchor to mount a PG7 size cable gland to 2020 extrusion for my VORON Legacy build. It serves as the static position for umbilical setups. It allows belts can be run between the anchor and frame. Hardware needed: 1x M5x8 SHCS…
BOM: Printed with ROSA3D High Speed PLA Gray Mid-project and realized you're out of wall plugs? Save yourself a trip to the hardware store! These heavy-duty expansion anchors are designed to hold tight in solid walls and are perfect for…
Pirate Anchor pendant Suggestion: print in black PLA or PETG and paint with silver to make it look like metal.
Anchor Hook Printed with a .2mm layer height. Printed with hook laying down and with supports. Prusa MK3S gcode included.
Dekor Anchor...fits my print in Place Chain
As we are often working with our MFT bench from Festool we decided to make our own clamp anchors depending on our special needs. You need TWO of the clamp anchors to hold the clamp tight and save (see pictures). Fitting perfectly. We…
Please make sure, your print can handle the weight of your expensive camera before using this design. I do not take any responsibility for broken equipment. Onshape-Link:…
The original wall anchor piece only lets the screw to hold/squeeze the bottom half of the part wall anchor printed part against the wall which means it's if you pull on the base plates, it can break there, leavinf the top half on top of…
Screw-In Anchor Cable Zip Tie Mount 6 / 10 / 20 / 30 / 40mm - Fissaggio fascetta 6mm 10mm 20mm 30mm 40mm 29/12/2025 Update: added 6mm version All our designs are free to download and use—we believe sharing drives innovation. Your support…
Use #17 or #18 sizes nails for the cable arches Use #4 screws for the cable clamp and large cable clip For the ziptie anchor I recommend double sided adhesive foam (affiliate link): https://amzn.to/3w16Kq6 You may need to use a glue stick…
Mein eigener Entwurf eines Stiftehalters/Schreibtischorganizers. Höhe: 100mm Kann skalliert werden. Yet another Desk Organizer . Heigth: 100mm Can be scaled. Category: Organization
32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter
I wanted a tiny cable tie anchor and could only find 1" ones here and people were suggesting to scale it for 0.75" adhesive tape, but it also scaled the hole for the cable tie making it unusable. Three files, all the same height, all…
MY BEST DRYWALL ANCHOR YET IS DESIGNED TO USE A PHILLIPS HEAD SCREWDRIVER TO INSTALL ALSO HAS A BIT TIP ON IT THAT SNAPS OFF EASY FOR DIFFERENT LENGTH SCREWS TO BE INSERTED AND IS DESIGNED TO HAVE A WIDER OUTER RING TO MAKE FOR A TIGHTER…
Wall Anchor #7 x ~30mm Screw The shaft of the anchor is designed for a ¼" drill bit.
This credit card-sized template let's you draw guitar chord diagrams and tablatures on the go. You'll need a pen with a fine tip or a mechanical pencil for the 1mm wide lines. For the drawing in the photo I used a 0.4mm fineliner. A STEP…
Simple 30x30 mm cable tie anchor with 3 mm screw hole. Supports wide heavy duty cable ties up to 10 mm.
Ground screw anchor with replaceable insert The ground screw is the basis for my garden socket holder (in progress) .. but can also be used for many other things Installation in the ground The ground screw is designed for medium-heavy…
Experimenting with an Eagle, globe, and anchor with a skull on the back of the globe.
Printed a cute bathroom anchor hook for a friend. This will be used for a small hand towel. I printed in PLA with a high infill
Remixed Stealthburner CW2 chain anchor for PG7 mount
I designed this peculiar drywall anchor iteratively, following the demise of coat hanger screwed in drywall with "standard expansion-type drywall anchors" (the narrow split ones). I started by reproducing the "threaded" type of drywall…
Just throw the rope around a tree and loop it around the anchor hook. It can hold a surprising amount of weight. I also put some hooks on the paracord to hang things on.
These designs were made with a flat-back surface to be wall mountable. The height of these designs, while laying on it's back, is 8 mm with the width at 100 mm. You can resize/rescale it for your printing pleasure. ***NOTE*** Each USCG…
“Son, can you design and print me an anchor keychain model?” … and here we are. Use your standard profile and material, nothing special. Maybe use PET-G to increase the durability.
This is a simple zip tie anchor Print instructions Category: Parts Instructions Print as needed. Thread zip tie threw hole Stick double sided foam tape to the bottom and attach where needed. I found this tricky to print. If you use…
The model on this platform is discontinued. Head over to MakerWorld to have fully customizable version directly in your browser: https://makerworld.com/en/models/861624-wall-anchor-french-cleat-frenchfinity
Discover two minimalist anchor designs, perfect for your keychain or as a decorative accent. Intentionally crafted to be compact, these anchors can be effortlessly scaled up in a slicer. [PRINT SETTINGS] Layerheight 0.20mm 3 Walls 75%…
BOM: Printed with ROSA3D High Speed PLA Gray Need a quick fix to hang a small picture frame, a thermostat, or a lightweight shelf? These printable expansion anchors are designed for small household tasks. Designed specifically for a 6mm…
Been working on a home gym and came up with this option for an resistance/exercise band wall mount. New model has smoother edges to hopefully reduce cutting of the resistance bands and your fingers. In my testing the model can take a lot…
This is a simple ground/dirt anchor for vertical trellis vegetable stringing (in my case, tomatoes). Simply tie your string around the knob at the top, then screw the anchor into place near the base of your tomato plant (trying to avoid…
A very simple model I created to secure an Ikea wardrobe to the wall to stop it toppling over. Printed fine with the larger surface on the print bed with no supports on an Ender 5 Pro and PLA.
Yet another base for zip ties. Just use some double-sided tape (e.g. 3M™ VHB™) on the bottom to hold the anchor wherever you want. The anchor is designed for Zip ties with a max. width of 2,5 mm. If you want another size, just hit me up!…
2020 T-slot Clip-in Anchor Wire Cable ZipTie Mount 20mm Suitable for: All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this file, please leave a…
These Eagle, Globe, and Anchor is an awesome print. Huge props to whoever first designed it (Chesty Puller?). Make sure when you add supports that you are VERY careful removing them from the ropes, especially on the “top” part of the…
German: Ich nahm den Anchor - tall ship style - ancre by RoudCach, drehte den Balken um 90° und halbierte das Modell um es besser drucken zu können (das Teil muss also zwei Mal ausgedruckt und miteinander verklebt werden) Dann…
The local hardware shop is selling these at over $1 each for a pack of 20 for what is less than 10c of plastic. I only needed one wall anchor so made this to get the job done. It is designed to fit inside a 10mm hole drilled into brick or…
Comes in two Parts. The upper Bridgepart of a RC Scale Boat, around 1:45 Scale. Takes 8.5h one Part. The main house are 3 parts.
Learning to play the guitar and wanted an easy way to make chord/scale boxes for my notebook. It comes in 4 and 5 fret versions. To represent the nut, just move the stencil up a bit to make a thicker line on top after drawing the boxes.
Mein eigener Entwurf eines Stiftehalters/Schreibtischorganizers mit 3 Fächern, inspiriert vom vorherigen Design. Höhen der Einzelnen Fächer im Original: 90mm, 60mm, 30mm. Kann skaliert werden. Yet another Desk Organizer with 3 cavities,…
Steampunk Anchor Sculpture
I designed this close to 3" ground screw anchor to hold in place a tent that i have setup to provide shade for my chickens. It can get quite windy and the 9" aluminum tent stakes were coming out easily. I haven't load tested these to say…
The .stl model named Creality is for Creality 20 series V- Slot profiles and the Generic model is for other brands as I found that the slot have different dimensions. Use a cable tie in the slot to secure the cable/wires. The slots can…
