2639 modeli
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) :…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. In this version I added an internal structure to greatly improve the accuracy and I created a full set of tweezers. There are 7 models :…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
This is a wider version of a scissoring mechanism designed by Richard Swika on thingiverse Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 30% pick material wisely, Pla may break at handle
Wydruk około 6,03 €–7,38 € nettoWstępna wycena jednego wariantu
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
📝 Description The Ruler Stop S is a compact and precise stop designed for 0.5 × 15 mm rulers , ideal for workshop use, model making, and DIY applications. To make it максимально flexible, the model is available in four versions (M3, M4,…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
San Francisco 49ers 1st Layer Black 2nd Red 3rd Gold 4th White 5th Black
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Wydruk około 3,09 €–3,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: I liked the original a lot (thanks @M4NU !) added grip lines at both ends of the tweezers, so it can hold things safely i have found it useful for my usage Asembly: just fold it, no glue needed (just like original) Print settings:…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
no special print features I just printed it on 0.3 and draft. ONLEY WORKS ON ELMERS 7g GLUE STICKS, look at 2nd image for more info.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…
Wydruk około 3,57 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, This is a compliant mechanism that can be used for percise positioning in two directions. The dimensions of the Compliant XY-Positioning Device are approx. 69 x 61 x 8 mm The range of motion in X is approx. 1 mm; the range of…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 18mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 18mm, proporcionando una…
Wydruk około 8,76 €–10,70 € nettoWstępna wycena jednego wariantu
Precise Slug for Umarex t4e HDR50 This is my design on slug that I have tried on my TR50. Remove support after print is finish like on images! Then simply place the 8mm ball on top and with a little pressure it will click into position.…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Minimalistic design suitable for precision workshop projects.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The same great SuperPINDA Precision Adjuster for the MK3S+ , now available for your MINI/MINI+! The SuperPINDA Precision Adjuster (SPA) is an integrated mount and adjustment tool for the SuperPINDA probe on your MINI/MINI+. Overview: The…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is ECI mag block for a Ruger 10/22 or Ruger Precision Rifle. Keeps the bolt from closing.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…
Wydruk około 17,21 €–21,03 € nettoWstępna wycena jednego wariantu
for English Documentation see below Intro Diese gebremste Filament Zuführung passt unter anderem zu meinem Filamentspooler . und zum PRUSA LACK Enclosure. Sie ersetzt meine erste Version und ist geeignet für Spulen bis zu 200 cm…
Wydruk około 3,88 €–4,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Precision Multimeter Tweezer for SMD and small components Introduction Traditional multimeter probes can sometimes be inconvenient when measuring small components or testing printed circuit boards. To address this, I designed a pair of…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Ever have trouble deciding on a yes or no question? Would you rather leave things like that up to chance? Well here's your answer. Everybody's seen a decision coin before, but have you ever seen one without text? Me neither. Here's one…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
TL;DR Print in place rotating ring toy with freeCAD source to make your own. Collection rotating rings Motivation The oldest model i know from February 16, 2014 done by RarelyEvil @ thingiverse goes around with many clones. Fascinated by…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you draw a circle on an x/y plot touching both axes, the distance from the origin to the centre of the circle is R+L, with L being the distance between the origin and the nearest point on the circle, and R is the radius. With a bit of…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
hold IKEA scissors symmetrical
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
TL;DR Freecad source with a sketch for the bat sign. Collection exercise, CAD Motivation Learning by doing, saw the question how to sketch that on reddit and give it a try. I started with a surrounding rectangle to not get lost in…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Precision Centre Finder Centering Square 120mm Gaging Center 160 x 132 x 20mm
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
WHY?! I do a fair bit of massively complex functional prototyping. I used to have to draw a 3.10mm hole to fit a 2.90mm screw if I wanted my 14mm square hole to be 14.00mm. Now, I draw 2.90mm and get 2.85-2.95mm, and get my +/- 0.05mm…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This Wilkinson razor blade holder is your new secret weapon for precise, gentle scraping. Perfect for removing stickers, adhesive residue, and other debris from flat surfaces. Simple yet effective, it’s ideal for detailed tasks that…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement blade for the Paper scissors model with a larger finger hole for bigger hands (see second picture for side-by-side comparison). The basic blade shape and joint hole are unchanged, so you can mix and match with the…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Precision Centre Finder Centering Square 90mm Gaging Center 140 x 100 x 20mm
Wydruk około 3,01 €–3,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
TL;DR Desk organizer like one i saw on amazon, freecad exercise update 2023.0505 added organic support added version with open bottom Collection exercise, CAD Motivation Learning by doing. Copycat something you see with your favoured CAD…
Wydruk około 29,70 €–36,30 € nettoWstępna wycena jednego wariantu
Decisions! Decisions! Once you print this, your decision will be so much easier - just ask a question and take a spin. This is an easy and fun variation on my Board Game Spinner. I have four version available here (all with the same…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
3D design of a ruler for measuring the diameter of a circle and an angle gauge. Ideal for use in engineering and educational projects, this tool allows for precise and easy measurements, making it a great resource for students and…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
This simple tool will let you easily remove the bottom seal on a Lefty Ocho. First mount the tool on the Ocho, then use a vice to hold it while you pull/push the echo until the seal gives. It does take a bit of force. Be careful to not…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Guide - Magnet Cisco Icons: Accessories: Magnets are 3x3mm (3mm height x 3mm diameter). There are two versions of switches and routers, and all are provided in sets of 3. Each print has three holes on the back. If using neodymium magnets,…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x193.49mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Wydruk około 4,08 €–4,98 € nettoWstępna wycena jednego wariantu
Utilizing mrmila's model with a few changes a couple of versions, depending on your needs ie table, wall, embossed, engraved multi coloured (in file) single extruder Drink responsibly
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Art students use the 10 different size Micro pens to draw in black ink on white paper. When using all these different-size micro pens, I wasted too much time looking for the desired pen size on the end caps, which display the size. The…
Wydruk około 5,61 €–6,86 € nettoWstępna wycena jednego wariantu
Jednoduche cisteni masoveho mlynku
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Background: I have a multi-panel exercise pen made from heavy wire that looks like this: I wanted a way to secure this pen to a wall, while being quick and easy to remove the pen for cleaning or storage. This model attaches to a wall…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Introducing my most complex model yet—the Print-in-Place Scissor Lift! This model is expertly designed to print entirely without support or assembly, showcasing the latest advancements in 3D printing. Features: Threaded Screw Mechanism:…
BOM: Printed with ROSA3D Starter PLA Black Having trouble deciding who pays for takeout, whose turn it is to empty the dishwasher, or if you should buy another spool of filament? Let fate decide with this funny, deeply embossed Yes/No…
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
These screws are inspired by ISO 8765 metric screws but they have standard pitch threads . They come with hexagonal heads, that are slightly bevelled on one side and contain a washer-like elevation on the other side. The longer screws…
Simple solution for large scissors storage on a Ikea Skadis pegboard Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
I remixed the Precision Tweezers by M4NU to a cranked version. For that I chopped off the folding mechanism and added the 45deg angled legs. The folding mechanism is ideal for remodeling the legs and also in terms of “printability”…
I like this caliper a lot so I added it from thingiverse. Here is a link to the original. https://www.thingiverse.com/thing:1661962 Original Description: Summary this is a wip. i will be tweaking and adding files and information as i go.…
A remix of a scissor holder Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15%
A remix of the Large Scissor Holder for Skadis by MattBurt that fits the honeycomb storage wall by RostaP
Your scissors always in the same spot: grab them and put them back with one hand. A scissor holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.…
This is a spoon that allows fast and precise spooning. You can easily fill your smallest and largest desiccant containers without spilling the tiny pearls - say goodbye to funnels. The unscaled spoon can hold ~12ml that is 10g of…
Printing Parameters: Material: PLA or PETG (more durable) Resolution: 0.2 mm Perimeters: 3 Infill: 15 % Supports: no One color or add color changes at 12.6 mm and 57.4 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape…
I printed the spool winder by V3 Precision as had a couple spools that were not working well in the AMS. Although it worked and uses no fittings other than the screws to hold it down, it didn't respool as I expected. I had to touch the…
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
High-Precision Bench Vise (Anti-Flex) This vise is designed to guarantee maximum stability and mechanical precision, completely eliminating the flexing, lateral play, and jamming issues typical of 3D-printed vises. 1. Mechanics and…
Uploaded authorized by the original modeler Indigenous Effects . Check him out. There are two options of covers: 1: Option cover etc… It is compatible with the swing set but are “plain”. (Yes the parts list photo is a little it chopped…
Tapping arms keep taps level and supported. I designed this model specifically for using small taps, as small as m1, that will almost certainly break if used by hand. Video: mag chuck video: My smallest test with this tool was a m1 tap,…
Gridfinity 5x1 bin to hold two pairs of common household scissors. Can be printed without supports.
I HATE PROTRACTORS ALREADY! I printed so many prototypes and spent a lot of time and plastic to find the best tolerances. I'm really tired of them! Anyway, here is a professional version of The Smallest Protractor . It is bigger as you…
There are some tick removal tools in internet. To be honest there are quite a lot of them. You can also buy one. Anyway I was not satisfied with any of them (at least with that I have tried). So I have made my own model from scratch…
BOM: Printed with ROSA3D High Speed PLA Gray Stop wasting filament on bulky tools. This is a highly optimized, thin-wall funnel designed for speed, efficiency, and precision. Key Features: Ultralight Design: Engineered with a wall…
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…
Printing Parameters: Material: PLA or PETG Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no One color or add color changes at 12.6 mm, 57.4 mm and 88.0 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape Use…
This Magwell Flare fits Aero Precision M4E1 AR15 Lower with slip-on fit and retention features wrapped around rear. Fit is tight; if printer oversizes part then filing angled contact surfaces should be workable. The rear retention…
his is my model spiral Francis turbine. Turbine has 8 blades. More info about turbine runner is in file: "Turbine runner.txt". Turbine runner modely by Esmir Hozanovic. If here somethik problem, download model here:…
Click in a scissors holder to your Multiboard wall. Easily pull the holder out to move it to a different location. Works with lots of different sizes or scissors! Requires a Multiboard Snap to click into:…
The arm of the Work Sharp has a tendency to deflect or sag as you apply pressure when sharpening a knife. This simple but effective support block prevents that from happening.
My wife is always misplacing her small thread cutting scissors. I made this simple easy-to-print model so that she can store her scissors in a sheath on her sewing machine right were she needs them. The sheath can be mounted to the side,…
UPDATE: May 4, 2026 — Version 2.0 is here! Based on user feedback and testing, I’ve completely overhauled the model. Here’s what’s new in V2 : Improved Blade Alignment: Redesigned the blade compartment for a tighter, more secure fit. No…
This is a custom precision bass guitar body. After printing a custom Stratocaster that I found, I decided I wanted to try making my own guitar and since there wasn't a bass available to download, I figured I'd give a try at making that.…
english: A Storage Unit for Gridfinity ( a System designed by Zack Freedman) which hold up to 6 scissors. Printed with Petg and 0.3 mm layer hight Deutsch: Eine Aufbewahrungseinheit für Gridfinity (ein von Zack Freedman entworfenes…
I couldn't find a simple adjustable plier and wrench organizer so I designed this. It is very versatile and works well with most tool box drawers. The parts are simple and print very quickly. The height of the dividers can be scaled as…
Funny sign-"I do precision guesswork based on unreliable data provided by those of questionable knowledge" Complete with recesses for 10mm x 1mm magnets to make the sign easily mountable on any flat ferrous surface. 2 versions (stl & 3mf)…
Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.
The PetG is recommended 0.2 layer height 10% infill You can insert a 3 X 10 mm nut/bolt in the joint in case you use PLA
Was looking for a good representation of St. Francis of Assisi and everywhere I looked I came up short. The main model is from a 3d scan of a bronze figure of St Francis of Assisi carved for the high altar of the Santo in Padua, made by…
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
Simple Jug Can Pot Kännchen whatever to precisely I designed these to mix up some epoxy for my knives and pour that precisely into the handle molds. But it works super good with water too! I have 2 Designs: One with a handle to hold it…
IMPORTANT NOTE: As user GamerGuy95 reported, this does not work in Cura. Theoretically, there could be some way to make it work, since Cura does allow for mesh modifiers; but in practice, I don't know. I haven't used Cura for ages, since…
Simple but very cute scissors-shaped earrings. Degli orecchini a forma di forbici, semplici ma molto carini.
Design update: added thickness and a fillet to corners to help with thin prints. This 5x1x5 tray has two compartments, each designed to securely hold a pair of scissors. The compartments are deep enough to prevent the scissors from…
Overview A parametric re-imaging of Horacio 's excellent HSW Cutter Holder which allows you to fully customize the inner dimensions (height/width/depth) of the holder, choose the variant style and the number of slots, and pick the…
UPDATE 2024/29/05: Added holder for stone 51,2x19,6 mm. Name is KSJ-06-06. UPDATE 2024/31/03: Added revolving grinding stone holders. KSJ-06-04 is for attaching three stones at once and KSJ-06-05 is for attaching four stones. That means…
An 8-sided coin best printed standing! Prints support free but do remember to use a brim so the coin won't topple over! This is the last item for the special Campaign Event from Mythic Potions! 6 versions are included, half of them are…
Intro Can’t make up your mind? This fun Decision Maker is the perfect 3D-printable tool to help you choose! Whether you’re deciding on coffee or tea, work tasks, weekend plans, or what filament to use next — just give it a spin and let…
Only a few small test pieces have been printed to test the fits; otherwise this is still non-printed and under development. Files, instructions, and other stuff might change! UPDATE: Added “Side Race 2.stl” I saw a Facebook post showing a…
A replacement desk clamp for scissor-arm microphone boom stands. If the original clamp on your mic arm broke or went missing, this is a printable substitute. The hole for the mic arm post measures 13mm. Files included Mic Stand Clamp…
🧰 Overview SV08 Gantry v2 brings a cleaner, more precise CoreXY experience: Front-access belt tensioning for the AB motors (Voron-style) Aligned pulleys at the XY joints for parallel belt paths Easier setup & maintenance with more travel…
Built for my Lenovo Flex 5 14". One of the keys' scissor mechanism broke. I got the measurements off it and modeled this. You can either print everything in place, or split the two bodies and print separately although it is tricky to mesh…
A compact holder for Scissors for the Skadis peg board system - for use with slim scissors For holding thicker scissors, see: https://www.printables.com/model/281597 No supports required Requires the Universal Hook by CSD_Salzburg:…
___________________________________________ Make sure to also check out the MMU3 UltiMulti printable parts ___________________________________________ Chimney and Chimney-base parts are an alternative to the Prusa ir-sensor-holder-mmu2s…
NOTE: Although this prints well on my old Anycubic i3 Mega, it does not print properly on my P1S. Because of the increased speed and accuracy of modern printers printing it on the side with the spinner does not offer enough stability. It…
A Logo Stand from Sanfrancisco 49ers
Latest files are available on MakerWorld. Get the full Plate Print Profile: https://makerworld.com/en/models/189397 ===== A simple HSW holder for pliers or scissors. My particular style of scissors are able to snap-in upside down ===…
Intro Sometimes it is the most simple tool, that will help you the most. This is one of these tools… This tool will help you to hold a saw blade and by this to do a clean 90 degrees cut. Hold the tool by hand or use clamps. The saw guide…
Yes, this is yet another drawing machine based on the coreXY principle, which is well known from the AxiDraw maschine. But instead of driving the size upwards like other designs here on the web, I have decided to keep it very compact,…
V2: I added a 1X6 container that holds 2 larger sets of scissors as well. This is a 1X4 Gridfinity container which holds 3 sets of scissors
MDT Inspired buttstock, to be used on a Savage B22 Precision rifle. Or modify it at your will to adapt it on any rifle. Main stock body uses 2 M4x20 screws with 2 M4x6x6 insert Use a M10x80 hexagon socket screw and M10 nut for the…
Peigne de précision pour dégradés. Design ergonomique, impression sans support. Idéal pour barbiers. Robuste et pratique
![Precision Lefty Ocho bottom seal removal tool [ reusable • no support • 25% infill ]](https://media.printables.com/media/prints/5788a7b9-c7bc-438f-aa31-a7fea36a8fb8/images/10627906_064c7356-9808-4cf1-8b57-d94715741a7f_5aa531a1-5b25-4d3e-9803-6c4d33e9114e/img_9261.jpeg)
