701 modeli
This is an articulated dolphin - Clipper. It is flexible, requires no supports, and was designed to be printed in place. Recommended print settings layer height: 0.15 mm infill: 10% gyroid perimeters: 3 supports: no The fin should be…
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
A 3D model for carpet trimming: a guiding tool that helps you achieve even trims effortlessly. The model can be printed in separate parts (floor and handle), which can be aligned and glued together. Alternatively, you can print it as a…
PrusasLicer 2.4 coming with small fancy assistant. He Clippy. =) Print Settings Material: Several types of Pla Nozzle: 0.4mm Layerheight: 0.2mm Post Process Clean the print with a scalpel if necessary and glue it together with super glue.
Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…
This Wahl clipper comes with some guards of different lengths, but not any long enough for my purposes. I have made 15 and 20-mm guards, but the Fusion 360 models allow for pretty easy creation of other lengths. It may be difficult to…
Hair clippers normally have combs that only go up to No8 (25mm). I require something longer, so I have created No10 (notionally 28mm) and No12 (notionally 34mm) ‘extension sleeves’. These fit over a Wahl No3 ‘donor’ comb (that takes care…
This is the first model that I have designed. In designing this model, I used the gridfinity specification drawings done by julie777 to get the required dimensions to fit into a gridfinity baseplate.
A 5x2 Gridfinity bin for the Wahl model 9649 hair clippers. Print with draft quality settings with low infill, but ensure more than 2 top layers to avoid the pillowing in my photo.
CDXC LOGO in 3 colors , Clipperton dx club. 206X196X3 Dimensions are easily editable with prusaslicer. the gcode file includes the pauses for the filament change. Find the right temperature for the filaments to avoid deposits during the…
I modeled these after the clipper guards that came with my Surker hair clippers. Mine only came with sizes up to #4, and I wanted more options! This is an updated version from my previous. The “fins” are now much better supported and less…
Clippy is a climbing clip stick I designed to be affordable, reliable and adaptable. Most clip sticks on the market are ridiculously overpriced, so I made one that’s easy to print and built to last. The screw mechanism lets you attach it…
Case for Clipper Lighter. There is also the Autodesk Fusion 360 and step file for customizing.
These are two Wahl clipper guides in 2 inch (50mm) and 1.5 inch (37mm) sizes. Should work with most 1.87 inch (47.6mm) max. wide Wahl style clipper blades. They are intended to be used with the clipper horizontally, on the side parallel…
Just a simple sleeve to go around a clipper lighter. I printed mine in TPU, should work in other materials also. working on V2
Imported from thinginverse and slightly modified parts for easier printing. All credits to david_0429 on Thinginverse. Print all parts flat side down and glue everything together. Body needs to be printed in angle with raft or supports. I…
4.5mm guard with additions to make it easily printable. I added 3 supports to the back that snap off after printing. A brim that holds all 10 comb feet down to the bed securely that is also easily removable after printing. Pictured is the…
Hi, to download Moser Hair Clipper Attachments, and adds attachments: 2mm 4mm 7mm 10mm 14mm 17mm 20mm Hair Clipper is my production from the beginning of the planning stage to the final stage, printed, corrected until satisfactory results…
I found this model on cults3d from SLAVCHIK and remixed it with removal of the lowest layer to create a smaller more manageable print. If you need more storage consider downloading the original file. Happy printing!
Known to be compatible with Remington models HC363, HC822, HC920, HC921, HC4031, HC4050, HC5010, HC5015, HC5020, HC5030, HC8017, HC5850, HC5855, HC5870, HC6550. Could be compatible with Wahl, but I'm not sure. Sizes: #1 - 1/8" #2 - 1/4"…
10 slot blade holder for Andis clippers. For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters. Slots are sized to fit blades similar to sizes 000 or 3 1/2 (T blades will fit, but will knock into other blades. See…
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips Hair Clipper? Print yours now. Simply click it on & clip your hair with precision. About Philips Fixables Fixables is a collection of 3D printable…
Lost the orginial hair clipper guard so i made some in 3D Print with supports in PLA, 0.2 height
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips Hair Clipper? Print yours now. Simply click it on & clip your hair with precision. About Philips Fixables Fixables is a collection of 3D printable…
very cool with silk pla, printed at 1.16, no supports
really loved the mini darth vader, so i made one that fits perfectly a clipper lighter thanks to funda clipper cover, looks great spray painted shiny black remix from https://www.thingiverse.com/thing:2936081…
Display for your clipper lighters collection. Jet clipper lighters have slightly thicker base so you need to print hex jet.stl for those.
Wahl-Style Hair Clipper Insert Size #2 (6mm) Print instructions Do not use supports. Print flat, with text up. Post processing: There is a 0.2 wall attaching the tab on the back to the sides. You need to cut that with an X-Acto knife.…
It is a remix of Phatcros' beatiful design. I have remixed it to make it shorter to fit my clipper lighters just how I wanted. This remix is for Clipper Lighters that are 50-51 mms long without the metal cover.
This is Marius ’ “ Slim Raspberry Pi Zero 2 W Case ” with a spacial backplate that can interlock on 3030 extrusion clips (themselves based on Shaun Doe ’s “ Prusa MK3 / MK3S / MK3S+ LCD cable clip “). I’m using it to run a minimal…
The nail clipper holder makes clipping nails a less strenuous task for people with limited finger dexterity. It features a large force applicator so users can clip their nails by pushing down on it with their palm or hand. Print Settings…
open front to show the pattern of the lighter
looks good with dual color filaments, no supports, print at 1.16 quality
I made the original files one single "print in place" piece. I added a clipper holder to the right side. Printed with Matterhackers Build Series PLA @ 210 degree extruder and 65 degree plate. 0.2 layer height with support under the hanger…
case to hold your lighter and your lovely joints :)
fits clipper perfectly, has a hole in the bottom so you can refill your clipper (and helps to remove it from the sleeve) printed in translucent tpu, but i bet painted stone colour looks great, i suggest using supports
Clipper Lighter Display can hold 15 lighters. The text has been extruded inwards to improve the print result. No Supports needed. Category: Organization
This organizer will hold twelve Oster Andis or Wahl clipper blades or guards. When using PLA I got significant warping on the corners even with a skirt, so I printed using ColorFabb CF PETG, which meant I had to print it very slowly (12…
This model was originally uploaded as an STL provided by @Hi_Im_Dave . It was a near perfect fit. I took it into fusion to add add a custom designed brim/mouse ear and then i noticed that the model itself had a lot of issues. In fusion I…
Mason Jar lid replacement for hydroponically propagating you plant trimmings. Does not require growing medium or 3D printed supports. Place plant trimmings into device. Place Jar in sun light. After about a week there should be root…
Simple Wahl Clipper storage I made for my girlfriend. It is a fairly large print, so be aware. Works with Wahl 5 star cordless clipper and detailer. Unsure if it'll fit other clippers/details, so measure before printing if not using for…
This model is for storage, not for display
Inspired by darknrg 's Clipper Lighter Case design, I based my model roughly on his dimensions. However I wanted the model to be a little bit more snug, especially in the top area, so I re-sketched the model and changed some angles a bit…
Clipper sleeve hug from Groot. i love this one, i rigged Groot model to hug a clipper sleeve. one of my first Blender body manipulation. easy fast print, i do advise minimal support. happy printing. p.s id love to give credit to the owner…
Comb for Phillips QC5115 hair clipper
Customizable Hair Clipper Guard for 45mm head width clipper. Should print even without supports (with some imperfections below two side flaps like things). Fins could be printed with one perimeter 0 infill, minimum 0.5mm wall thickness,…
After designing clippable bricks , I thought it would be awesome to have a storage box in similar format as well. Therefore, here it is! Fully customizable in size, compatible to clippable bricks (LEGO® compatible). Modify the 3 values of…
I was given a Remington beard trimmer kit, but my beard hair is way thicker than the hair on my scalp, so it works fine. Gave my son a haircut after my wife cut mine and it came out too short. The kit only came with up to a #8, which to…
Pickle rick clipper sleeve. im a pickle! big sleeve for friends that can not go home without new clipper in the pocket! (i call it desktop clipper) or just a nice fixed lighter for your smoking corner. easy print. Happy printing
Larger clipper guards for people who cut their own hair but find the No 12 1.5" guard leaves their hair a little too short. I used a brim and tree supports, adding extra support along the entire curve of each fin to improve part accuracy.…
Imperial Clipper model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
EDC clipper para llevarlo en el llavero o en el pantalon, mochila etc.
A simple box/stand to hold 10 clipper guards (designed for 1.5 - 25mm guards) Internal width is 52mm Smallest slot is 10mm, largest is 34mm.
Printed with PLA+ 0.2 infill 10% no support Better if scaled up
You can combine the left, middle and right part to customize the length of the Holder. Update (25.06.2021) : I made the dovetail guide bigger and gave it more play, so it should fit better now. Category: Organization
A comfy home for runaway lighters.
Clipper guard organizer for full set. Fits in case.
clipper honeycomb keychain
Office Clippy. Multi material version. This is an MMU remix of the single material clippy located here: https://www.thingiverse.com/thing:159313 NOTE: This is an MMU print, not individual parts.
This project is a ‘fork’ of https://www.printables.com/model/57885-self-watering-rectangular-planter-with-optional-la and my motivation is to have a syphon where the water and earth do not touch directly. In my case it is enough if the…
I present to you my display for Clipper lighters. Available in versions of 1-10 and 15 Clippers. Feel free to ask for more versions and modifications, I'll be happy to accommodate. I created this design by slightly tilting the lighters to…
Easy snapable y-carriage LMU8 bearing clipper for your Prusa printer Goal: create less force for a smooth run due to a better force distribution arround the whole reachable bearing surface extends the lifetime of your bearings due to the…
I printed this at .3 layers with 10% infill in petg. The part needs to flex to get it on so I don't know if it will work in pla. Its a snug fit.
Das Modell hab ich einfach geschnitten, gedoppelt und angefügt. Das kann man beliebig so weiter machen. Das Grundmodell ist eine Super basis
Single and multi color Clipper lighter case and keychain, dice shaped design. No support needed. Multicolor model filament change at layers 180 and 350. Keep in mind that the lighter fits tightly, so for first several extractions use a…
Modern Clipper Lighter sleeve for the standard sized CLIPPER lighters inspired and remixed from Modern Vase by 3DDruckEN Happy prtinting.
This wall-mountable box holds sizes 1 to 8 guards for Wahl trimmers. The holes are ~4mm for screws. Update 9/10/2020: Laid the STL flat so it doesn't need to be arranged for printing Rounded the edges a bit Added a version without text…
Microsoft published this tweet saying it might be back on Office replacing the paperclip emoji. My Print: Supports: Yes Layer heigh: variable between 0.1 and 0.2 (PrusaSlicer option) Scale: 64% (10 cm tall) clippy-complete.stl can be…
sculpted in blender with my wacom pen. i did two layers for quick painting of the model in bambu studio. print at 0.12 or smaller scale it to 101.5%. tree supports my multicolor sleeve is black, silver tentacles, olive octopus and white…
Holds both toenail and fingernail clippers. first slot is 17mm x 16.5mm second slot is 13mm x 12mm
Store 10 Conair hair clipper guard standing upright for quick access. Print at 99.5% scaling if receptacles are too large and guards fall out. Or print at 100.5% if they are too small.
– EN -- Mini Sewing Scissors Clipper (snips) case. Can be used with one hand, push the small ergo with your thumb to uncap. Can be printed in PLA, I've had mine for a few months. – FR -- Mini couvercle pour ciseau de couture coupe fil. Il…
Holds a pair of small clippers for cleaning up 3D prints. Mounts on a Skadis Pegboard.
Lid for the 10 slot blade holder for Andis clippers: ( https://www.printables.com/model/208188-clipper-blades-holder-pet-grooming-barbers-stylist/files ). For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters. (T blades…
A simple to print clipper case Will add more designs soon! I'm open to requests :)) Hope you like it!
Darf ich euch meinen minimaltischen, modernen Beutelclipp v2 vorstellen? Der Clipp ist wiederverwendbar und kann handelsübliche Tüten und Beutel verschließen, damit der Inhalt frisch und genießbar bleibt. Ich habe ihn in PLA gedruckt,…
This is the full set of printed parts and PrusaSlicer profile to mount the 3DChameleon Mk3 onto the Sovol SV-06 printer and the SV-06 Plus. This set includes the 3DClippy filament cutter used to cut off the tip of the filament so it can…
I remade this 3DClippy from scratch to work on my Ender 3V2 with a Biqu H2 extruder. I'm using a 3DChameleon MK3 to change colors so a filament cutter helped avoid needing tip shaping when changing colors. The included PDF explains how to…
Over the time more and more Clipper lighters stacked at home so i came up with this simple modular design to get them all lined up. Nothing special but handy.
A small ring that fits snuggly on your clipper so you can add it to your keyring. Hopefully less lost Clippers and not more lost keys. I recommend you print the 3mm version since a few of my 2mm ones have broken since. Print instructions…
Included a replacement straight guard as well as 2 custom guards at 5 degrees and 10 degrees from perpendicular. Added step file of the straight piece to help out with remixes.
Freezer and Food Bag Clip
First built in 1938, the Boeing 314 Clipper was a long-range, flying boat luxury airliner used by Pan American Airlines for trans-Atlantic and trans-Pacific flights. Before the jet engines and large runways became common following World…
This is an extracted model model of the Zorgon Peterson Panther Clipper Mk II from Elite Dangerous The model will needs some fixes in your favorite 3D tool. Scale 1:1000
Maturity: Good 3 prototypes. In use since 2024/02. You may add a pad as in my 3mf file to get a better printability. Print without support.
This was made using Voronator, and then edited in blender, it was a pain to color but it's worth it!
Rafts: No Supports: No Resolution: 0,12 Infill: 60%
Famous “Clippy” from back in the days is happy to help you on your desk and hold your notes! Easy print, supports are needed for the main body. if you want to change color for the pupils do so at 3.6mm height. simply glue together. happy…
Clipper holder for 9 lighters, can be attached to the wall.
A box to hold pliers and clippers. And once you noticed you clipped something that you shouldn't have clipped: It also holds some superglue. Caution if used in a drawer: Make sure that the superglue has enough clearance above it,…
Clipper Lighter Stand To Store Up To Twelve Lighters From Your Collection. Multiple STL To Hold Five, Six, Eleven or Twelve Clipper Branded Lighters!
For many years, I used a Flow-Bee haircutting tool, but eventually, the blades got dull and they can't really be sharpened. So rather than buy a new one that would eventually suffer the same fate, I designed an attachment for my hair…
This is a replacement comb attachment for Braun Hair Clippers. The model was specifically designed and tested for the product HC5010 . However, it should also be compatible with similar Braun models marked HC5090, HC5030, HC5310 and…
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips Hair Clipper? Print yours now. Simply click it on & clip your hair with precision. About Philips Fixables Fixables is a collection of 3D printable…
remix of: Mickey Finger ornament and keychain by: FlorinV me❤the clipper lighter lemme know what ya think bout it 🤞 plz share ur makes ❤ ==> check out my other Clipper Sleeves <== 🡇 printer: Bambulab P1S 🧱 infill: 10% 🧬 support: no…
Support: Only needs support on build plate Look in the image for the best print orientation
Storage for your clipper blades and guards! Eight and 10 slot trays are included. Wall thickness is optimized for .8mm line widths at 1.6mm wide.
what you think? i try to upload the final file by gcode but it say error
![[Clipper Sleeve] Mickey Mouse - Middlefingers up](https://media.printables.com/media/prints/1338242/images/10097050_110a6ce9-c6b7-4dad-b6cf-0032773f9c46_35352873-97ea-469a-8b39-de3412651514/large_display_clipper_sleeve_-_mickey_fu_1338242.png)
