202 modeli
This model is perfect for showcasing your Commodore 64 and keeping it ready for use! It works well with both vintage and the new C64 Ultimate bread bin style Commodore 64s. Plus, it’s a quick and easy print without any supports, which…
Surfchamp was a game for the Commodore 64 and Spectrum 48K, released in 1987. It came with a plastic surfboard which turned your keyboard into a surf controller. Unfortunately it didn't do very well, it's quite rare and even rarer to find…
The 8032-SK model of the classic Commodore CBM PET lineup does not feature the iconic “hood stand” that holds the case open for easy access. With these parts, you can retrofit a similar stand that securely holds the case open between the…
This is a case for the awesome Commodore 1581 floppy disk drive replica project presented by toms01 on Forum 64 . The case closely resembles the original with some practical changes to make it more 3D-printable and to accommodate 'modern'…
This is a miniature of the Commodore PET, a computer released in 1977 by Commodore that never became mainstream but is an important step in the evolution of microcomputers that in the '70s and '80s started a digital revolution. This model…
New version 2. Based off feedback I have increased the thickness by 1.5mm which makes it a better fit to the keyboard of the Starlight greatly reducing flex. Thanks to user Strudster for the feedback and image. This is a keyboard brace…
This is a CHERRY stem version (works on Gateron and many other clones) of the AMAZING keycaps for the C64 made by pixelmaker04 (Thingiverse: 4684156) . The caps could be lowered by 1-2 mm in the slicer to avoid them hitting the key plate…
Find all the information on how to print and build a working Commodore PET Mini, along the latest versions of the 3D files on the official website: https://commodorepetmini.com Introduction This is one of the most iconic-looking computer…
My rendition of the Commodore Computers logo in a LED lightbox lamp. Can be hung on a wall or sit on a table. Choose your preferred LED lights and method for installing them but I went for pure white LEDs adhered to the back plate and not…
Commodore 64 coaster Printed in Red, Blue & White PLA Prusa Mini Plus, 0,20mm SPEED, 20% infill
This project provides about a dozen variants of C64/C128 cartridge cases. These models were built using adjustable, high-detail, non-destructive modeling for everything. It is therefore quite easy to make new variations on these basic…
This is my 1st design I haven't worked out the best way to print this, Any help post in the comments. Thanks edit added a version 2 with thicker walls edit 19/10/19 added a version 4 with a curved inside top so able to print the right…
This is a simple C64 display shelf stand.
Printed with a single extruder using the method outlined in a video on the CHEP Youtube channel found here . This method easy once you understand it and work out the details. It also results in a very nice surface. Note that the model is…
Additional parts needed 1x 2mm stainless steel rod with 51mm length 1x steel spring 3.8mm diameter, 24mm length Post Printing Remove supports carefully, if the mechanism doesn't slide freely in the metal parts, use a small file to gently…
Cover for C64 User Port (24 pin) / Cassette Port (12 pin) connectors. Connector I used: https://www.aliexpress.com/item/Sample-2pcs-Lot-805-Card-Edge-Connector-3-96mm-Pitch-2x6-Row-12-Pin-PCB-Slot/32539449444.html…
Hi all, I have made my own version of the Commodore 64 Cartridge case, that is easy to print on an FDM regular 3D Printer. You can print this one face down no support needed. I have a regular version and one with a hole for a small…
Commodore 64 + Datassette stand This is a remix of this model: https://www.thingiverse.com/thing:3921140 The C64&Datassette version is compatible with both the C64 and the Datassette.
My first computer ever. I modeled it a long time ago. This model was done with solidworks within 1mm tolerance. However this model is just a volume model without back ports. Easier to print. The original is like the real amiga in parts.…
Replacement control cover flap for Commodore Amiga 1081, 1084 and similar monitors. In three parts, print with ABS and acetone weld them together.
This is a remix of the "Commodore 1702 monitor door" by SkaBoyTD. I made a number of tweaks and modifications to his original design. I discovered my Commodore 1702 monitor (NTSC) had some subtle differences with the placement and sizing…
A dustcover for the keyboard of your Commodore. Comes in different flavours, with the chickenlips-logo and as a blank cover. Also in one piece or splitted in two parts for the more standard-sized 3d-printer. Stp-file is added. The…
Do not insert this printed template itself into a drive. While it may work out OK, I'm not sure how the printed surface or any defects would affect the head and other internals. Template to mark and cut transport cards for the Commodore…
Untested! The design is based on careful measurements (made by hand, not scanned) and has been double checked, but I don't have the means to print it to test it myself. If you print it please upload a make and give feedback. This should…
Blue and black keyboard plungers for the Commodore 128. Blue is used for the function keys, black is used for the main keyboard. These are really only suitable for resin printing. Might work or be able to be adapted for other Mitsumi…
Untested. The design is based on careful measurements (made by hand, not scanned) and has been double checked, but I don't have the means to print it to test it myself. If you print it please upload a make and give feedback. This should…
Case for Commodore 64 cartridge PCB. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Resolution: 0.3 Infill: 10 Filament: Plasty Mladec PLA Orange Category: Computer
The Ultimate II+ Cartridge by Gideon's Logic has an optional Tape Adapter. Unfortunately the adapter does not come with a beautiful case. I looked for case models, but found none that I liked or that could be printed without supports.…
A good as possible (imo) replica of the old PSU-box for the Commodore 64 and VIC-20.You can use it to built in your psu-replacement. The outside is a precise replica of the original, the inside is cleaned out to give you space for your…
This is just the stem for a key from a Commodore 64 keyboard. It does have a fair bit of detail to it, probably best for resin printing… Dimensional accuracy is important for a good fit. I did a number of prototypes on my FDM printer and…
Commissioned work for a retro fan. A (modified) C64 logo as key chain fob.
A modified version of the original front cover for Commodore 1541 II with MeGALoDOS Multispeeder. Modified for 0.96" OLED display and rotary encoder. The front fits for models with CHINON drive and together with the original case parts.
I have measured a lot of cartridges and they differ a little in sizes. Some fits very snugg in the holder and some are a little loose. Handic cartridges does not fit in this holder.
I helped Proclips testing out a prototype mount some time ago for my Chevy SS and while it mostly worked I was never super happy with it. From Proclips it never had a solid mounting feel to it and their solution involved double sided…
Modified the original model ( https://www.thingiverse.com/thing:683369 ) so that it can be printed in 3 pieces and glued together afterwards. This way the printed hinges are much stronger. Print Settings Printer Brand: Ultimaker Printer:…
This model is based on another model from Thingiverse, but doesn't seem to be available anymore. This one tries to fix all issues with that other model and make it work better for FDM printing. I don't claim any rights to this model.…
should print fine however t is printed. might want to print with petg to avoid car heats
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Please note the license for this design! It does NOT allow for commercial use. This is a shell to fit the original cartridge PCBs made for the Commodore 264 series of computers, i.e. the C16, C116, and the Plus/4. I tried to capture the…
A retro key for your keyboard Once upon a time it WAS the MOST POPULAR and PROLIFIC Home Computer. Was endorsed by William Shatner the VIC-20 sold over a million units William Shatner Commodore VIC-20 Commercials. - YouTube
This is my proposition of housing of the tape adapter of Ultimate II+ cartridge for Commodore 64. In my version many details have been changed and improved. Take a look on the attached pictures. To mount PCB inside the housing first you…
I needed a new and nicer boat-stand for my old Graupner Commodore from 1969. It is designed to be completed with 10mm wooden dowels as in my other design here: https://www.thingiverse.com/thing:2464547 New Version that uses less material.…
Commodore 1541-II front and lid. This variant is for DS-50F drive. In the next future, I'll make also CHINON FZ-501M drive variant. There are nr.3 files: the front part, the lid and the Commodore logo.
This is a case designed to hold a GBS-8200 video board and my Commodore 128 RGBI-to-RGBA converter board. The bottom half features cooling vents, holes for the two video connectors and the power connector, and extra holes for a secondary…
Next of the C64 cartridge's housings collection. This time I designed case for Magic Desk cartridge by 8bitchip.info. The case can take an IC in a socket, up to 10mm high. In the slicing software I added a decorative strip to the case but…
In this project we’ll show you how to build a mini replica of an iconic computer from the 1970’s. This project uses an Adafruit Feather M0 and LED Matrix to make a retro inspired computer that resembles the Commodore PET. It’s a neat…
I made a video showing how I fit it into the CRT. I had a 1084s monitor with a faulty switch and it was hard to find an original. While searching for alternatives I found the Canal PDS-1 and if it was flipped onto it's back the…
C64 keys Row layout filenames start from the top to bottom, special keys are named. Known missing is the spacebar - will update here when done. Please note the prints in the images are done a few years ago on a printer that was pretty…
There are 2 joystick top parts: One for sanwa type joysticks with 45mm mounting holes. One for joysticks with 32mm mounting holes. You will need 4: 3mm x 30mm screws for the joystick and small 2mm screws for the cable clamps and connector…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
About this project There are several versions of the VIC 20 and Commodore 64 keyboards; this design is intended for the most common one. I worked on this project in my spare time for about a week, right after receiving my first 3D…
Laser engraved transit card for Commodore 1541 floppy disk drive. The Corel Draw (.cdr) file contains the data needed to laser cut the card. Dimensions were drawn in Solidworks based on…
This is my C64 Silver Label print with both the regular and power badges, that I made after not being able to find a good option out there… This won't fool anyone into thinking you've got a real silver label, but it does look pretty good…
Commodore 64 Diagnostics / Dead Test Cartridge Case has been designed for the “ C64 Dual Dead Test & Diagnostic Cartridge & full test Harness ” designed and sold by Melbourne Console Reproductions. The LED is visible through the case and…
Using a Bambu Labs Printer? Find this model on MakerWorld including the print profiles. The Commodore SX-64 was a ‘portable’ version of Commodore’s successful Commodore 64 home computer, released in 1983 just months after the C64. Whilst…
A "pop-in" hinge replacement for Commodore 1084S monitors like the one shown in the pictures. Video: https://www.youtube.com/watch?v=9_imHHJwesA Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200…
Commodore Keycap printed with White , Blue and Red
Generated via TinkerCad from an .svg-file. Category: Signs & Logos
EA-055-13 gear for ALPS plotter mechanism that was used in many small plotters, like Commodore 1520 or Atari 1020. Cracks in those stepper motors gears are a very common fault in this type of plotters. It is a very small size, therefore,…
Case repairs clips for the Commodore VIC-20. These replace cracked or broken rear clips that hold the case shell together. I highly recommend using a two-part epoxy. The grooves provide more surface area for better adhesion. One variation…
holden commodore key case multicolour
This is an enclosure I designed a few years back for a custom-made C64 power supply. I made it for a personal project but figured I might as well upload it for others to use. I've included the original SketchUp project file as well since…
If you want to repair the power supply for your Commodore C64 and looking for a solution to hold new parts inside old housing, this frame should help you. Additional data and pictures you may find here:…
Ride retro-style with this Commodore themed license plate frame. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20% Grid Filament: Prusa PLA Galaxy silver Notes: Designed to be printed…
The perfect gift idea for the freak who grew up in the 80s and was allowed to call a Commodore 64 his own. Whether for yourself or for a friend, the C64 lamp is not difficult to assemble. All you need is a 40 cm long LED light cable with…
I enjoy retrocomputing and keeping them alive, and as any fan knows, Commodore's vintage C64 power supplies are... extremely dangerous to the computer these days, to put it mildly. They fail from age (Hey, they're often over 30 years old…
I made this case because I demolished the original case when I broke it open to change the spotwelded battery. So yes with a bit of work you can change your Holden Car Key Battery Print Settings Printer Brand: Monoprice Printer: Select…
Recently I found some old cartridges for Commodore C64. They are working, unfortunately their housings look bad after over 30 years. So I decided to design new enclosures. First of them is a MicroLUC v2 cartridge case…
You may find on ebay some really clever interface, named TOM, for your C64 which allows to connect modern mouse, keyboard or gamepads by USB. It is also suitable for Atari and Amiga. It comes with typical housing, however this housing…
When I was in school, I got introduced to the Commodore PET 2001 and learned programming from the very first beginning. So, I was very excited to stumble upon https://commodorepetmini.com/. Decision was made to download and heavy modify…
Commodore logo layered for color print using manual filament change. Openscad script is also provided.
A designer floppy disk holder for your 5.25" Commodore 64 or VIC-20 floppy disks. It can comfortably hold around 20 disks. Be sure to post your makes! If you like the design, please consider tipping on Ko-fi . Thank you! :-)
Why would you want to cover your joystick ports? Because on the Commodore computers those pins are connected directly to the CIA chips on the motherboard. Should you accidently touch the pins and there's a static discharge you will likely…
A small case for the Amiga SDBox (Mallet version for big sd-cards) i use transparent 1.75 PETG filament as “optical fiber” for the led-holes. have fun… :) Print Settings Printer: Prusa MK3S+ Rafts: No Supports: Yes Resolution: .2 Infill:…
Next of the C64 cartridge's housings collection. This time I designed case for The Expert cartridge by Retrotinker/Dirk Wouters. Take a look on attached pictures. The case can take an ICs in a sockets, up to 10mm high. In the slicing…
Recently I found some old cartridges for Commodore C64. They are working, unfortunately their housings look bad after over 30 years. So I decided to design new enclosures. First of them is a MicroLUC v2 cartridge case. The next one is a…
Print first keyboard, ring and F keys. Choose your favorite colors. Use glue to close Vic20 model.
If you want to repair the power supply for your Commodore C64 and looking for a solution to remove the resin, this frame should help you. Once you have removed the electrical wires, insert the bottom of the power supply into my frame and…
Commodore Amiga DB9 to USB Mouse Adapter Shell no supports are needed ! this is a case for this project : https://www.pcbway.com/project/shareproject/Micro_Amiga_mouse_adaptor.html
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
A case for the "Commodore 64 PS/2 mouse to 1351 mouse adapter" from Melbourne Console Reproduction (melbourneconsolerepros.com). The case is a really good fit and really strong. Screws are not needed, just click the top over the bottom of…
I couldn't find a model of this that was accurate to the original, so I had a go myself. Attach it with some thick double sided tape.
If your screw posts are broken off it can be tricky to screw your breadbin case back together. These sleeves are designed to slip over the top of the stump of the broken post and be glued in place, repairing your beloved old brown…
Bracket for SX-64 monitor replacement. Fitting LCD & Controller: AT56TN52 & JD567M03 Two versions: Angled: This fitted perfectly into my SX-64 because my SX-64 is not right angled. Right angled: if "angled" doesn`t fit for you, you can…
The Commodore Business machines logo, rendered from possibly the original design drawing by Chris Yaneff . Approximately 50 mm across. If printed at 0.2 mm layer height: change filament to navy blue at layer 4 (z=0.8 mm) change filament…
This project is a remix of FoxBlox's "Mini Commodore SX-64" model, with many changes and tweaks. This one is much larger than the original, making it easily printable with common 0.4 mm nozzles, and I have hollowed-out the interior of the…
This is a tray-mount case for 60% keyboards based on the Commodore 64. I call it the Lionel because it's a fraction of the size of a full Commodore 64. It is a remix of two models: Commodore 64 model…
Left and right hand. I have test fitted on my vehicle and fit well. Open to any suggestions on any changes improvements.
The top and bottom should load in your slicer in the ideal rotation. The top part will need supports, the bottom does not, but if you print the whole thing in one job adding supports won't affect the bottom anyway. You'll need to flip the…
YouTube Walk-Through: Introducing the Modular Commodore Case. This case is intended to fit the following Commodore 8-Bit Computers: Commodore VIC-20/VC-20 Commodore 64 (Breadbin) Commodore 64C Commodore 16 The case consists of the base…
Print halves face up with grid supports inside. Print Pin upright with Brim and organic supports.
Simple keyboard cover for the Commodore C64. The cover fits snuggly over the keyboard only and does not cover the entire case. Has a similar styling to the C64 case with the lines and logo at the top. The cover is fully cut-out to save on…
Snap in covers for the Video and Serial ports on Commodore Computers. I have tested the round 64c style inside a Pixel Wizard and original 64c case. I also did test it in a C128 flat case, but its very tight. Might need some sanding or…
This is a cartridge holder/organizer for the Commodore 64. There is another cartridge holder out there, but I found that the Epyx Fast Load cartridge would not fit in it, so I made this cartridge holder using OnShape. The back-two slots…
Printed at 0.2mm height, slots in the original location, and has tiny tabs to hold it in place. Not much to it other than that. Category: Video Games
Display Stand for Commodore C128
Printed it using PETG but should work fine with PLA too. 0,4 mm nozzle at 0.15 mm layer height, 0.2 mm layer thickness will work fine too. The letters are just one layer thick, if you get troubles sticking them to the bed then try to…
Keycap with the Commodore logo on it, for ALPS keyboard switches
Commodore 64/128 TapeCart SD Case Category: 3D Printing
![Amiga 500 [Commodore]](https://media.printables.com/media/prints/909817/images/6952877_a45f250b-982e-484d-91b1-3b1b4a5baf72_19f0fafd-3c55-4abf-b9f3-9d59a131f071/20240611_234605.jpg)
![Commodore Business Machines [defunct] Logo, colour](https://media.printables.com/media/prints/247196/images/2225870_5449a276-996f-4130-b735-859f25ffd44d/343e4a4e46d0e717a8f64f8e286d9540_display_large_24.jpg)
