159 modeli
Triangle pins hold the two halves together. The holes (the circular ones) should be on the same side so that they line up. The caps help keep the gears on the pegs.
Wydruk około 4,81 €–5,88 € nettoWstępna wycena jednego wariantu
I was inspired by Matt Parker's recent video ( https://youtu.be/oTWeuyDMgwo ) on compound platonic solid, and wanted to print a 5-cube compound platonic solid myself. I unfortunately could not find a good-quality 3d model of it, and…
Wydruk około 3,24 €–3,96 € nettoWstępna wycena jednego wariantu
This model prints pretty well, however I found that if you want to have a good glue seam when combining the pieces to form the compound of dodecahedron and icosahedron it is worth sanding the edges on each side of the triangular pieces.…
Strong crossbow made primarily out of 3D printed parts. This is not a toy. Crossbow had measured 70 lbs of force, but this depends on the amount of tensioning and used PETG strength. BOM and instructions are in the provided pdf assembly…
Peep sight rotation can be very annoying and time consuming to fix. One solution is to twist the bow string to perfectly align peep but it requires to have a bow press. One other, fast and easy solution is to use this little tool, that…
Micro Reverse Compound Crossbow Really fun for shooting on a magnetic dart plate. The parts are printed in PLA and PETG at 0.2mm layer height. Additional Hardware: 2 mm wire (I used a 2mm stainless steel tig welding rod) magnet D:6mm…
This model is a remix that adds a couple features. Three version are available. One with a deer silhouette, original, and deer silhouette with peg for holding your bow release. The hanger will hold over 25lbs. Happy printing
!!WARNING!! I am not a structural engineer! I am making this sh!t up as I go along. The risk I see with the project is the risk of the PETG limbs giving out while under tension. This could result in the limbs shattering. For safety sake,…
Playing around with more gear ratios. Might use this in a puzzle… Customized version of https://www.thingiverse.com/thing:3497579 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3497579 Instructions…
Repose-arc à poulie en design bi-color (pas de double extrusion nécessaire) Branche noires imprimées en PETG, décorations, tenon et patin de fixation rouges en PLA Il faut prévoir une vis à tête creuse hexagonale ainsi qu'un contre-écrou…
This is a printable replacement magazine built mainly for the Diana, but it also has notches for the Worker Nightingale, and the Firerat (untested, also an uncommon blaster). It gravity drops from the Diana, but not the Nightingale. These…
Stand for a compound bow with split limbs (with a 22+mm gap) like a Mission Switch. Inspired by https://www.thingiverse.com/thing:6541994 Designed to be printed with a TPU filament (photo: 0,8 mm nozzle, 0.5 mm layers).
This clamps on to the bow limbs and holds the bow upright. Can be used in different positions on the limb depending on bow config to keep it upright. Instructions Print out 2 pieces then bolt together with M8 hardware. The other two…
Its here, Version 2 of the cycloidal reducer! All the hardware is the same from the original version, however every printed part has been redesigned! Here are the current improvements over the original: It is now easier to print and…
!!WARNING!! I am not a structural engineer! I am making this shit up as I go along. The risk I see with the project is the risk of the PETG limbs giving out while under tension. This could result in the limbs shattering. For safety sake,…
I've already used this gearbox to build a 5-axis robotic arm which will eventually also be available here. These gearboxes provide a lot of torque and are surprisingly durable with minimal backlash. They are not backdrivable. The photos…
This is a GoPro mount i designed myself in order to mount my GoPro to the stabilizer on my bow. There are others out there similar to this model, however this is my own creation that I started from scratch in OnShape. I did so because a…
This is a wallmount for a compound bow like the EK Archery Assassin/Exterminator or other use cases - where ever a wall hook comes in handy, this should work. For the screws, the file supports diameters of 5,5mm for the screw and up to…
for NEMA17 stepper motor. fully printable. reduction ratio is 1:72.875 you need a 6806 bearing
This is a compound bow stand with rubber sleeves/protection, for solid limbs. (In my case, a Diamond Medalist 38. Which has limbs 37mm wide, and 8-10mm thick). Print a right and a left leg, and two rubber sleeves. Four versions of the…
Keychain inspired by a compound bow. It has a small recess on the “riser window” area like in real bows. Cams have holes in them like the real ones. A 2.8mm hole is on the top cam to allow it to be used as a keychain. When printing make…
tool for setup right angle for arrow nocking point on compound bows
Printed using an Elegoo Mars with ABS-Like Resin. FDM should work as well, though. The brushes were taken from a popular brand (see pictures) The connecting bolt needs to be attached to the arrow receptacle after printing. Super glue…
V 6.5 of my 3d printed Tactical compound crossbow. <disclaimer> I am not a 3d designer. I can not use cad. I am a trained mechanical drafter,…ON PAPER. Yes I'm old enough that we didn't have CAD when I was in school. This means I'm a…
these need to be printed with supports.
Ten Zone scope is a great value for money scope for compound bow, but lacks some accessories. Integrated shade is only 16mm in length, which can be to short if you're shooting in the morning or late in the afternoon. This sunshade is an…
Check out version 2 here ! At the moment (6/7/24) it is still in beta, but version 2 is still better in almost every possible way! Reduction specs: 64/1 reduction. NEMA 17 mounting. BOM: 4x M3x25 cap head bolts 2x 10x15x4 bearings 1x…
A fun print in place fidget toy that demonstrates the true power of gears to increase speed or torque. This is achieve by combining small spur gears with larger spur gears into compound gears. This download includes 2 different systems,…
This is for the Kobalt (Lowes hardware) 12 inch dual bevel sliding compound miter saw item# 0358936 / model# SM3055LW. I bought my saw probably 8 years ago now but I'm pretty sure they still sell a derivative of this saw at the stores. A…
2026_10_10: For the total masochists here's a link to the original plans if you would like to machine one from barstock: https://www.myheap.com/images/stories/Metalworking/Resources/downloads/ElmersEngines_byElmerVerburg.pdf 2020_04_07…
This compound planetary gearhead is an anti-backlash version of my earlier Robot Actuator (smallest version): https://www.thingiverse.com/thing:3293562 It has about 50% more torque, significantly less backlash, and also runs more…
Print with original oriantation to allow for stongest directional strength for use. 4 wall thinkness and 20% infill worked for me.
Print settings : TPU 95A 0% infill no supports 2 walls 2 top layers 2 bottom layers. Don't use “vase”/spiralized mode otherwise the print may fail on top/bottom parts because you'll see a gap in the model and i don't know if it will stay…
A decorative set to insert into the holes of the Mathews TRX 38 compound bow (and probably TRX 40 but I don't have one). Took me less than an hour to modelize and print (so why look at similar things on archery shops for around 20€…) You…
3D Printable Kick Stand for Compound Bows! Keep your compound bow safe and secure with our lightweight, durable 3D printable kick stand. Designed for easy printing and portability, this stand provides stable support for your bow, whether…
This is a replacement for the crummy vacuum attachment (which broke on my saw) that allows you to attach a 4" dust collection duct to your Bosch hinged compound miter saw. Be careful which direction you slice this, as it needs to be…
Print the drop-in support block out PETG (or any other plastic that will not bond to the plastic used for the main model) and insert before the upper surface starts printing. It should key in to the hex cutout as shown below. Print main…
This is a zero clearance insert for the Ryobi TSS103 10 inch compound sliding miter saw. It's separated in two parts to fit most build plates. I made two versions, one of which has a solid block beneath to stop any dust from falling…
Adattatore per il montaggio della go pro su un arco compound.
Another demo of the Solid Compound Planetary Gearbox with updated source, tidying up and refining the geometry. SCAD is still an unreadable mess, but a slightly improved. Incorporating clamping jaws and knob options. Print in place, fully…
This 3D model represents a compound of a cube and an octahedron , inspired by a shape I discovered in a Wikipedia article. The geometric interplay between the two forms creates an elegant symmetry. The model prints easily without…
This is a simple cam for a toy compound bow I designed just with some photoes of real cams Category: Sport & Outdoors
While learning about geometry, I came across a Wikipedia article on duality , which used a cube-octahedron compound as an example. Intrigued by the shape, I modeled it in CAD (…
Prints flat with no supports needed
Not yet finished, ultimately the OpenSCAD model will be published and customizable on Thingiverse. Here's a video of the thing in operation (gear ratio is -2209.85 to 1): https://youtu.be/GvXuM1YQFO8 Based on designs and lessons from GDFW…
This is a compound ornament to hang on your tree. Print instructions Category: Other Summary This is a compound ornament to hang on your tree. Instructions Definitely scale up the print, the default is quite small and not strong enough to…
Ripped straight from the fallout 76 game files
This model is compatible with the lego system.
Part holds a dial indicator on BXA sized tool posts. This allows the user to set the compound to the exact right angle to follow a tapered part for reproduction of that angle. This could be for a morse taper, R8 taper, or some other…
Molykote compound and other types of greases sometimes come in tubes without additional nozzles for finer dispensing. It is best printed with PP filament and a .25 nozzle. The model has a brim under which Scotch tape should be put. The…
To follow on from previous designs, if we target less extreme gear ratios we have more room to move with our choice of gears. In particular, it would be most beneficial to have fused sun gears in both stages. This would allow for the…
Printing Printed in Black PETG (spray painted with black outdoor paint to further limit UV exposure and to seal any potential gaps) at the following settings: Gyroid infill of 50%, 8 bottom layers, 0.2 layer height, 5 perimeters, 8 top…
Designed for mounting compound bows on Unistrut I print in PETG with 4 walls and found infill around 50% is good Print with the round part parallel to the build plate (not vertical) supports required Please test for yourself before…
Replacement compound gear for an Intek TQ81Bc paper shredder 7T Straight Press = 30-deg module = 1.61 36T helical, 15-degree Press = 20-deg module = 0.82 FreeCAD file included When printing, you could slice the bottom of the model at…
small into big, works well to mitigate vibration
Input: 17 tooth sun gear Output: 44 tooth ring gear For strength, print with many shells. Print with a horizontal expansion of -0.05 or -0.01. Supports not needed. Print with a raft and set fade height to 1mm for accuracy. Step file is…
Printed successfully! Tolerances are ok, M5 screws work without cutting threats. Added initials as a speziell touch. Hardware used: 1x M5 15mm flathead screw 1x M5 Washer 1x M5 selflocking nut 2x M5 Hexscrews aprox. 15mm 2x M5x15 Hexnut…
[HYP] COMPOUND BOW MOUNT THICK A WALL MOUNT FOR YOUR COMPOUND BOW, ► PRINT THE MODEL LYING SIDEWAYS. ► USE 4 OR MORE WALLS/PERIMETERS ► USE SAME NUMBER OF WALLS AS TOP AND BOTTOM LAYERS ► RECOMMENDED TO USE PETG/ABS OR ANYTHING TOUGHER ►…
🔹 Description This is a 3D-printable toy crossbow pistol that uses a slide-cocking mechanism to arm the string. Racking the slide tensions the limbs and cams, making it easy to cock with one hand while keeping the mechanism compact and…
my compound planetary gearbox. 268.8 : 1 if you want to use your own motor you must make a new 'first stage sun gear' and 'motor holder'. for the sun gear: -10 teeth -module: 1.4 mm -pressure angle: 20 ° for the motor mount, the center of…
Hi! This is my first CAD model ever. It took some math work to figure out rotation axes, angles and such, but i think it turned out fine and it was worth it. It's trickier to assemble than it looks!! You have to figure out not only where…
Holds 3@ arrows of diameter ~3.5-5.5mm (freecad file provided if your arrows are a different size). This is not really a remix, but an accessory for the Mini Compound Bow designed by DonStick3l... Don thanks for the wonderful design!:…
This assembly is used to help set the center shot on a compound bow. To complete this assembly the following is needed: Hardware: 4 - 10-24 countersunk head x 1.5" in length 2 - M6 Washers 1 - M6 Nylock Nut 2 - M6 Standard Nuts 2 - 10-24…
This page provides a few replacement parts for the Ultimate Foraging Wheel found at https://www.printables.com/model/1158725-ultimate-foraging-wheel-for-rats I wanted the wheel to be quicker and easier to refill, so I replaced the star…
Just a simple compound bow and Arrow wall mounts. The arrow mount fits 10 of them. The first bow support holds the weight of the bow on the cable rod and the second support , which it's slightly longer, simply holds the bow from the limb.…
This is a design for a replacement insert for a DELTA 36-220 10-Inch Compound Miter saw. Print it with a fairly high infill, no support required, then screw it into the saw and with the saw running slowly lower the blade to cut the…
All versions of my 3D printable crossbow in one spot. This version will use a threaded rod to connect the parts of the stock. This will increase durability and will make it so you can change the nose out to test the different bow options…
PNX CHG-3617 — 36:1 FDM Compound Planetary Gearbox for Robot Joints https://youtube.com/shorts/Z76G_8fSFTo?feature=share Project Overview PNX CHG-3617 is a 36:1 FDM compound planetary gearbox for robot joints, designed to mount directly…
Tree ornaments made from the Regular Polyhedral Compounds These are: Compound of Five Cubes Compound of Two Tetrahedra Compound of Five Tetrahedra Compound of Ten Tetrahedra Compound of Five Octahedra These are provided as whole models,…
80 tooth gear attached to a 16 tooth gear with washers below each gear (apart from the base)
This 3d model represents the hyperbolic variation of the cube-octahedron compound. The geometry can be split into two mirrored halves for easy, support-free printing. Print Settings (I Used the Bambu Lab P1P): Nozzle: 0.4 mm Layer Height:…
While learning about geometry, I came across a Wikipedia article on duality , which used a cube-octahedron compound as an example. Intrigued by the shape, I modeled it in CAD (…
This is a bow press that I modeled and have not built. It uses a standard 8mm lead screw, nut, and a skate bearing. There are some purchased parts as well as a couple 3d printed parts. Welding would be required to build this. The steel…
The Rolling Compound of Eight Octahedra is an angular shape inspired by the oloid, rolling in a straight path while wobbling in an S-shaped motion. Built with precise 90° angles, it creates an optical illusion from certain angles, almost…
A compound bow square to help tuning notch point height and arrow rest position.
I designed this pulley wheel for a cosplay prop, so I don't know, if it would be suitable for real use (I doubt it, since it is printed in two parts). It's based on the bow Arrow uses in season 5 of the show. For one wheel you need to…
The lever on this saw stand had taken a beating and no longer worked. So I drew up a new one. Fits onto model DWX723.
While learning about geometry, I came across a Wikipedia article on duality , which used a cube-octahedron compound as an example. Intrigued by the shape, I modeled it in CAD (…
Crossbow dampeners. Print this in TPU 80A or TPE 80A (or the same area) and save €39,50. Example: https://www.jvd-archery.com/products/114288 These dampers are necessary to dampen the worst vibrations in the limbs. It significantly…
This is a compound of a cuboctahedron and a rhombic dodecahedron, modeled in CAD as the base shape for a new fractal series I'm releasing . I’ve included the 3MF file for the exact print shown in the photos. That one was printed on a…
This is a simple wrist sling for all kind of bows. Create a unique paracord strap and sling it through. I used a washer between it and the stabilizer to prevent turning when you screw it on. Printed in TPU for maximal endurance with 100%…
*PRODUCT LINK to buy the milling table The handles for the two hand wheels on the VEVOR Milling Table (17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis) are both too loose, having a screw hole that's too big for the screw, and…
Since wheels for the micro RS4 seem to be discontinued, I created some basic wheels that fit the HPI D Compound soft rubber tires. There is a center block support so that the tire foam stickers do not need to be used. Printed on Prusa…
This was mostly an experiment to see if I could design something like this in FreeCAD. Unfortuantely, I totally failed to take any photos of the finished product, OR the broken one! I did get a report from my neighbour that it worked…
This is a helical compound gear replacement part for an X-acto Pencil Sharpener. The smaller "spur" gear was completely sheared off and missing by the time I got my hands on it, so I had to make a more-educated-than-normal guess at its…
A bodkin and blunt tip arrowhead for use with the Miniature Compound Bow by DonStick3l ( https://www.thingiverse.com/thing:2764962 ). Its not a true remix, the only thing I used from the bow was the aperature size for the arrow holder but…
I printed on a SLA resin printer, should be attainable on a FDM printer with proper support. Scaling it up would make it easier. Absolutely inspired 100% by Adam Savage's Tested episode from a few weeks ago.
[HYP] COMPOUND BOW MOUNT SLIM A WALL MOUNT FOR YOUR COMPOUND BOW, ► PRINT THE MODEL LYING SIDEWAYS. ► USE 4 OR MORE WALLS/PERIMETERS ► USE SAME NUMBER OF WALLS AS TOP AND BOTTOM LAYERS ► RECOMMENDED TO USE PETG/ABS OR ANYTHING TOUGHER ►…
Sight hood for Topoint TP8710 scope (will probably fit any compound scope with 35mm detachable screw lens)
Petite boite de rangement de lentilles et de visettes.
Made this to connect the bag adapter on a Dewalt Mitre Saw. Pop the bag off the adapter, slide this on and connect a 2.25" hose. Done.
Print upright with support under handle and two opposite bases.
This multi-part square helps setting the nock point height and arrow rest height with a cutted part of your shaft. The only part not printable needed (except your nock) is a shock cord (textile elastic) with a small diameter (2mm aprox.)…
Alternative Design Side Handle For Hitachi C10FCG Compound Miter Saw. May also Fit: C12LSH, C12RSH, C10FSB, C10FSH, C8FB2, C8FSE, C8FSHE. I bought an open box special some years ago and was missing the handle among a few other things. Had…
This is an additional small file for the primer compound (green in photo) for the original files this is a remix of.
1x1 Gridfinity bins for Tamiya Modeling Putty and Polishing compound. There are 2 different size models. The model for the Tamiya polishing compound has a slightly larger cutout for the deeper and larger cap. I use these on pegboard…
This model provides a replacement for a broken or missing motor cover on a Delta Compound Miter Saw. It works on model 36-075 and possibly others with similar shaped motor. I own this miter saw, and many years ago I broke off the plastic…
Updated: August 29, 2026 Pretty simple printing model — slice as you like! No supports needed. Two compound models - 10mm and 8mm insert diameter. Both should be more than enough to fit standard nocks. One recurve model - 8mm diameter and…
This model is a mount for a Diamond or Bowtech compound bow to mount a GoPro or similar small action camera to the bow riser in one of several proprietary recesses machined into the riser (the rounded-corner triangle in this case). The…
I couldn't find a reasonable adapter online, so I made this one. It should be printed in place without supports using PETG in the photos. I used 30% hexagonal infill, but less might do. You may be able to increase the miter-side clamping…
![[HYP] COMPOUND BOW MOUNT THICK](https://media.printables.com/media/prints/d4fc90f1-5f0c-410f-83d6-95be71b61f6d/images/10088292_86276277-35b1-4511-aefe-928a334a5157_af1e722a-6c22-4031-8701-74f888c214c1/1.png)
![[HYP] COMPOUND BOW MOUNT SLIM](https://media.printables.com/media/prints/f24e47c6-6ae6-4d28-9caa-4d5c31755e1b/images/10088311_63fb0568-ad39-4d64-8592-bbb6a72e13a2_a15c56a1-1312-4b31-8428-21c734cf89e8/3.png)
