430 modeli
I installed a couple of Mini-split HVAC units and needed a way to secure the line set, drain and control cable to the wall. This design will accommodate different size line sets, conduit and piping. It accepts 2 zip-ties to secure the…
Wydruk około 1,07 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pipe clip - Conduit Clips - B Type - Ø 16 / 20 / 25 / 32 / 40mm - Clip Fissatubo Aperto For quick installation of: RNC conduits Flexible & rigid tubing Available for the following diameters: Ø 16mm Ø 20mm Ø 25mm Ø 32mm Ø 40mm Features: 🟢…
Pipe clip - Conduit Clips - A Type - Ø 16 / 20 / 25 / 32 / 40mm - Clip Fissatubo Aperto For quick installation of: RNC conduits Flexible & rigid tubing Available for the following diameters: Ø 16mm Ø 20mm Ø 25mm Ø 32mm Ø 40mm Features: 🟢…
Do pobrania Listwy Elektroinstalacyjne, do maskowania przewodów i kabli, listwy dodaję o długości 250mm i w następujących rozmiarach wewnętrznych: 1 . Wysokość 10mm i szerokości ( 15mm, 20mm, 25mm, 30mm, 40mm i 50mm) 2 . Wysokość 15mm i…
Cconduit / pipe snap-in clamp. single screw tested with 30% infill and 25mm conduit Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: no-name PVA white Category: DIY
This is a perfect place to hide a house or even a business key. I got tired of locking myself out of the house so I invented this. It looks just like an LB conduit body that everyone is used to seeing attached to the side of a house about…
Clean, minimal clip designed to improve the look of exposed electrical conduit. Simple, robust and easy to print. ✔ Clean design for visible installations ✔ Reliable grip ✔ No supports needed Standard sizes (16mm, 20mm) included.…
Print: 0,2 layer 4 perimeters 40% infill
Looking for a better way to cut 3/4" EMT conduit, I could buy an expensive blade for my reciprocating saw or find a better way. I saw an angle grinder mount and decided to make my own to fit the grinder I have. UPDATE -- added a guide for…
Pipe clip Ø 16 / 20 / 25 / 32 / 40mm, Double - Clips Fissatubo Aperto Doppio For fast installation of RNC, flexible & rigid conduit Suitable for: x2 Ø 16mm x2 Ø 20mm x2 Ø 25mm x2 Ø 32mm x2 Ø 40mm Resize to adjust dimension All our designs…
I designed it so 2 sets could fit on a Mini. I designed it with a .8mm nozzle in mind but it prints fine with a .4mm nozzle. It fits ½" electrical conduit and they should be plenty strong on a 16" stud spacing, all mine are just into the…
PVC, conduit, and copper pipe clamping hangers. ½" - 2" Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp. They have an unthreaded hole for mounting with a fastener.…
2 sizes conduit holder clips for PVC Conduit d = 16mm. Mounted using screws d = 3 mm or d = 4 mm :)
Most filament guides I found were just plastic conduits through the lid, and in my experience the filament scratching across the plastic gets amplified like crazy by the enclosure. So I came up with this idea of running a PTFE tube…
*Component Added - Clip with 11.5mm LED strip gap This is a newly created model for my enclosure to organize and clean up my enclosure wiring and led lights. The conduit can be printed in white to act as a diffuser over top of led strips.…
A jam proof pulley for antenna or other projects. The hing mount and the pulley mount have a matching diamond interlock that allows the pulley to be mounted in one of two orientations, depending on your needs. There are also mast top…
Used it for EMT conduit legs for a table. Designed to fit #8/#9/M4 screws. Apply your best judgement on printing. For reference, I printed them in PETG with 4 perimeters.
Green House 1/2 inch conduit 3D print corners See Thinivers 6225649 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: MatterHackers.com PLA black Notes: Green House…
End Cap for ¾" Conduit. 2 files: Normal is for factory ends. Small is for ends cut with a pipecutter. It's a little smaller to account for some rollover to the inside.
Simple clamp for ¾" conduit
I originally designed these to use for building a small snow cab for my small garden tractor but decided to go another route with that! These are various fittings for EMT Conduit (¾"). Use your imagination to make all sorts of things such…
Conduit corner 1/2 inch conduit Print on corner as provided for best strength Purchase Link to get 4 each improved version flange on all 3 sides https://teleportpod.com/portal/f9ad59c9-a40a-46ed-a2c9-72d683e3ceb6?item=747 Print Settings…
English For electrical installations in the building, where cables are to be laid on plaster, lightweight construction or board walls, these usually need to be protected inside a cable duct or cable conduit. I have designed these brackets…
kompatibel mit 16 und 20mm Kabel leerrohr Ich habe für die Teile PETG Filament benutzt, PLA sollte aber auch funktionieren.
Inspired by the Extrutim model: https://www.printables.com/model/473485-cable-insertion-tool-split-wire-loom-tubing I designed it for mounting the Prusa Core One kit. This one is slit on the side to easily insert the electrical wires. On…
While my (ever growing) custom Garden Tag Marker Name Stakes are near perfection (if I do say so, myself) they do tend to get lost in larger gardens - my potato patch, for example. Som using slic3r, I chopped the stake off the tag and,…
This is a snap on flange to terminate 20mm (nominal) flexible corrugated conduit flush with a surface- i.e. drywall/plasterboard. I made this so I can run the speaker wires to my rear home cinema speakers through the walls inside conduit.…
This is a custom-designed adapter that fits into a standard M25 cable gland opening on an electrical enclosure or control cabinet wall. Instead of holding a cable, this part is specifically made to hold a 20mm (outside diameter)…
Please be aware this is a remix of the Repcord RepRack , although this is marked as not to be remixed, the creator has said in comments that remixes can be shared as long as Repcord branding is left on the model. Here in the UK it is…
Three different hole sizes: - 9.7 mm for typical pens - 7.7 mm for pencils - 11.2 mm for sharpies Use 6 x 3 magnet if you want to have it on a fridge or something. Print Orientation: Flat on the bottom surface for best strength Material:…
Join two ends of 20mm corrugated plastic conduit together
This is a wrench for a 3/4" electrical conduit locknut. I used PLA but ABS might be a bit more durable. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.20mm Infill: 100 Filament: Inland PLA Red…
A simple end cap for the 1/2 inch conduit used in the excellent RepRack spool storage system-its a snug fit..might have to tap it in with a mallet. Printed well in PETG and ABS with default settings on a Bambulabs X1C on a high…
Cable Conduit Manager for Hiding Cables - Modular Design Must be mounted to underside of desk with screws. M4 Holes already added. Print Left, Right parts. Middle parts optional, for extending the cable Conduit. Suggested to use 0.6mm HF…
Model redesigned to fit a different intended purpose. Using the same hardware as the original model.
just a simple reducer from 25mm to 20mm for electrical PVC Conduit, printed in PeTG 60mm/s no supports fast simple. just print it! its quick :)
A very simple elbow to connect two ½" EMT conduit pieces together. I used matte black PETG…
Frosthaven includes 9x “Power Conduit” obstacle tokens, this miniature is intended to substitute for the cardboard token. I didn't find one available for download so designed my own. I print this in PLA with a 0.12mm layer height.…
Introduction This is an alternate approach for supporting the Modular Wind Tunnel for STEM Education on a tabletop. The default stand included with the main tunnel uses discrete printed feet. While these are simple, fully printable…
Rolling filament rack with the following features could be made much larger printable in PLA Made using inexpensive metal electrical conduit. Wood dowels are expensive and plastic can’t support as much weight and sags. Optional Honeycomb…
This openscad script lets you create bushings for tubes.
I began designing these to make a custom cover for my generator. I'll be sewing the cover soon to fit over the frame. I made several other types since they are all just different configurations of the same design. These could be used to…
The new Light Bar for the Ender 3 V3 SE is OK, except they leave you hanging on how to run the wires to the Motherboard. The instructions don't mention that you need to drill a ¼ inch hole in the top of your right Z-rail. Which if you…
Here is a filament rack i designed myself. You can see it in the picture and has been working well for over 2 years now. My recommendation is to print a bottom, then a short 2 or so inch conduit to the first middle rack that will actually…
# EMT Conduit Connectors https://gitlab.com/tpmoney/emt-conduit-connectors ## Introduction This is a set of OpenSCAD scripts for generating various connectors for EMT conduit. Inspired by MakerPip, these are designed to help you prototype…
The provided brackets that hold the cable conduit in place are too small and crimp the conduit when attempting to put them in place. To overcome this, I looked at other designs; unfortunately, they did not meet my need. As a result, I…
I wanted a cable conduit, where i dont have to use Cable ties. Also i can easily remove them. You need to print it Horizontally to get the best stability. Because of that, you will need to print with support. Update: added small Conduit
These fit on most hardware store conduit. Three sizes available depending on where you live. Check the Outside Dimensions of your local conduit before printing there is 23.5mm, 25mm, and 25.4mm (in). I use the end pieces just to clean it…
prints with supports prints best flatt on one side if printed off accses as can be seen in cad photo you may end up with artefacts.
Just a quick ever changing and evolving EMT connectors for building a golf simulator enclosure. printing them out of PETG, pa12, and carbon PETG. Just wanted to start throwing them out for people to test and play around with if they want.…
Small clip to prevent the corrugated conduit to come out of the electrical box. Slide in the corrugation and stay in place. I printed them in PETG for durability.
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
These allow a sliding Tee or "H" joint for EMT construction. I used them on my portable solar panel project for the legs and they work great. You might want to up the perimeter walls a bit for added stiffness, I used 4 with 25% fill in…
MStence made a very nice design of a clamp (F-style as found here: https://www.thingiverse.com/thing:2767847 ) that fits on standard 3/4" conduit. By applying standard conduit / tube you can make a very long clamp to keep over-sized stuff…
Here is the cooling duct project for artillery sidewinder x2 with bltouch. Increases print quality with a greater air supply to the piece. The fans used are 5015 24v radial fans. the mounting screws are: -For mounting the duct to the…
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
I designed this to aid people wishing to make trellises as shown by Youtube channel “Josh Sattin Farming” in this video. It's sized to fit 15mm aluminum conduit closely enough to serve as a coupling all its own, without need for the…
Connects two 20 mm outer diameter empty conduits. Print without support. Don't forget to add a brim to make it stick. With stop lip inside - overhang-friendly chamfered design for support free printing - to prevent one of them from…
Originally designed to reduce the tripping hazard while playing VR, these can have many uses. I printed these in nylon and they have been resilient with many hours of BeatSaber. Items: ½" EMT conduit M5-0.8 threaded inserts M5-0.8 x 10mm…
Convenient adapter for connecting corrugated conduit (iD 17mm, oD 21.5mm) with Haupa PG-16 cable gland. Printed without supports. You can use the zip ties to additionaly secure the conduit.
cable trunking (prints without supports) honestly the best i could make. edit easily even with tinkercad for beginners. just make the walls 1.5mm and base 1mm is enough. I printed on Bambu P1s in Petg as pla is not good for useful items…
A collection of circular conduit boxes for 20mm bond in conduit. 2 off No: 6 x ½" Panhead self tappers or 2 off M4x12 Panhead screws are required to secure the lid. 1 off No: 6 x ½" Panhead self tapper or 1 off M4x6 Panhead screw and 2…
A collection of conduit/pipe clips for the following sizes of conduit/pipe. Nominal outer diameter: 20mm, 25mm, 32mm, 42mm and 55mm. Maybe used for both rigid or flexible conduit. The clips may also be clipped to each other, side-by side,…
This is a conduit box for any conduit or wires that need a 90 degree entrance and exit. It is printed in PLA and uses supports for the entrance and exit holes. The supports come out easily but need to be sanded down to ensure wires and…
I use 20mm plastic conduit pipe for my spool holder. I designed this end cap to fit using a friction fit into the pipe ends. It prevents the spool falling out of the spool holder during use. The end cap is easily pulled off and and on to…
Low Poly remix of https://www.printables.com/es/model/537573 Clip for Electric tube, provided STL are for 16mm, 20mm, 25mm, 32mm [1]. It is fully customizable, you can alter parameters in OpenSCAD supplied file. Updates 17.08.2023 Added…
These are simple conduit straps for schedule 40 PVC conduit or pipe. Sizes for 2", 1 ½" and 1". Best printed with PETG or ABS. Each file will print 2 straps. Will also work on ABS pipe. Note: For best results when attaching these to the…
Same as original but smaller files Category: DIY
We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…
MPCNC Bracket for Long Conduit : It is really advisable to install bracket when your conduits are longuer than 80cm to avoid chattering. Compatible with 5/16 US or M8 ISO EU Threaded shaft and nuts Conduit Diameter adapter for 23.5mm,…
p clip for 13mm od 13mm flexible conduit takes a m5 bolt
This clamp is designed for 16mm pvc conduits both flexible and rigid ones. Ideal for installing cabling for ceiling lightning. Can be printed in PLA and PETG without issues. It snaps thightly in place and can be removed with some force.…
Clips for 16mm electrical conduit pipe ( k-rør / trekkerør )
The basket prints as a single piece, rather than individual interconnecting pieces, so it's less likely to come apart in inclement weather - or if a dog runs into the pole. The interior is designed for smaller sensors, up to 35mm x 58mm.…
Join two ends of 16mm corrugated plastic conduit together
A simple, two-piece design to cover a 1" (25-mm-ish) hole with passthrough for Starlink cable (or any cable around 6.86mm). Just slide the slot of the main body on the cable and install the insert piece to encapsulate it, apply…
Just a simple loop clip for 20mm PVC conduit. Best printed on its side at 100% infill for strength. Takes me around 18 minutes to print a single clip at 50mm/s
Ask Marci for the midjoints and endjoints. She made a far superior version of the ones I threw together.
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
The original design by OVERTURE3D fit my space perfectly. I adapted the models to be used with ½" (18mm OD) EMT conduit, which I had on hand, instead of purchasing 1" dowel rod. Printed on a Sovol SV06+ with 0.6mm nozzle at 0.55mm layer…
This is an end cap for standard 3/4" (inside diameter) metal conduit (EMT). Used here as caps on the ends of conduit on a lumber/materials rack. (Conduit was painted black.) These are made snug, so a set screw or glue isn't needed, but…
A simple cable clip to neatly hold cables onto EMT conduit. Great for camera power cables.
A wall clamp to hold 20mm pipe close to the wall. It can be printed with snug supports on its side.
This is a wiring harness conduit clamp to replace the original smaller one that comes with the Ender 6 core xy 3d printer. The original is too small, so only the wires are able to fit through it. I made this one so that the conduit itself…
Some connectors for 16mm oval conduit, useful for getting conduit around corners etc - originally designed to route ethernet, telephone or fibre cabling around my loft. Depending on the conduit the fit can vary a little from loose to very…
A storage option for filament rolls. As connection I used ½" EMT conduit which can be bought in most hardware stores. With a length of 3-5ft and an infill of 15% (gyroid), the system holds well. At lengths over 3ft you should perhaps…
This is a 3D printable 20mm clip designed for securing standard PVC electrical conduit or similar plastic tubing. Ideal for organizing wiring, building clean cable runs, or DIY electrical projects. It snaps onto 20mm outer-diameter pipes…
I am currently building a MPCNC Primo using 3/4in EMT conduit which is the C-23.5mm version on the @ V1 Engineering site. You can find more info about the MPCNC at https://docs.v1engineering.com/mpcnc/intro/, and the files are available…
Quick and easy T piece for 25mm O/D flexible conduit. Prints with no supports. Tabs are mirrored in the model. Simply print 2 x parts and they will interlock. Secure with 3 x zipties.
Hello! My first upload and I hope it helps someone :) These are some clips based on the original ones within my ford transit, used to just clip onto some 2mm steel bodywork. They hold tightly onto any cable or conduit less than 20mm in…
Godesic Dome Corners for 1/2 " conduit Cut equal lengt conduit and assemble. Base pieces allow straight reiser. Not a jungle jim Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill:…
Thumbnail curtesy of Saryk A replacement bracket for the supplied cable reinforcer on the Creality Ender 6. Use PETG for best results. The Bowden clip may snap if printed in PLA. V2 update: Includes minor optimisation, to set back the…
I love the original model of this tool. I have added three enhancements to hopefully improve functionality. Unfortunately I have not very good with F360 so I have only added the modifications to my settings for 20mm PVC conduit. Maybe…
Fast print for 25mm electrical conduit, print side facing down, no supports, hyper PLA in K1 in under 13 mins. Little as no details to be fast printed, no countersunks, no round corners, BASIC PART.
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models come follow me on Patreon https://www.patreon.com/c/Adamnant for updates and exclusive minis. Here is another model from my list off of…
Here in the UK (and Europe) 19mm conduit is not common place, so I needed a shelf to fit on the 20mm conduit. I remixed chking's excellent RepRack shelf to fit 20mm conduit to be used in the UK
I had the idea of installing a conduit pipe to give a industrial look to my balcony. I used black 20mm conduit pipes and 3x70/0076 3 core insulated copper cable wiring for the lightings. Strong 3M double sided tape were used to mount the…
v1.1 Update: I've added a tab at the top of the bracket for an additional screw. After using the shelf fully loaded for a while, I noticed it was pulling away from the wall at the top. I've been using the new design for a while without…
