200 modeli
Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model was inspired by a modified link chain I saw a while ago but can't find again, so I made my own. Gently twist the link to open and hook onto other parts of printed chainmail. Make sure the orientation of the pattern is correct…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Connecting angle for connection or reinforcement. 2.5mm screw holes. For maximum strength, I recommend printing lying down. Dimension 50 x 50 x 30 mm. Print setting : PLA for maximum strength Full of perimeters
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
I designed this for the Tessellating Tiles contest as this is tile-able but it's so much more than that. You can connect these tiles into endless possible shapes. A great building block toy for kids and adults alike. For now i've only had…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Hi Im trying to model things in solidworks and this is one of my first atempts
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
Equivalent to Festool part# 575667 but allowing non-Schuko plug. In particular it replaces the Festool part# 575668 with a NEMA plug that has been discontinued. Parts used: Dust proof power outlet Cord grip 4x M4 nuts 4x M4 flat head…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Podlahova lista - vnejsi spojovaci roh Floor sheet outer connecting corner Print instructions Print vertically with support on the bed
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Wanted to prevent using glue to attach the two parts. Printed with brim.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Simple fix for loose threads. Made to fit connecting threads brand 1200 yard spools. It even holds them at 90 degrees! Holds 16 spools.
Wydruk około 2,55 €–3,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The connecting links between table plate and and legs boke. The gCode file includes two instances and I printed it with nearly 100% infill / more perimeter walls to create a stiffer part. Suitable for legs with 25mm diameter. V2 is…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Modified blade to be thicker With the original blade model, the blade pieces kept breaking whenever I swish-flicked it open because of how thin the walls were, both in PLA and PETG. So I increased the width of the walls of the blade…
easy to print highly detailed I hope you enjoy printing and would be very happy about a like and a make.
I was looking for an inexpensive way to enclose my 3D printer (Elegoo Neptune 4 Pro). I designed several parts to connect 19mm wooden rods. This allows for the rapid construction of enclosures for various purposes. Besides printer…
When I first got into this hobby of Lego trains and 3D printing I found a lack of custom parts available for download. All the builders seem to use 3D printed drive train parts and they are available for purchase from various websites but…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Parametric (F3D) GridFinity baseplate with optional printable connecting clips. 6x2mm magnets can be press-fit into the model as per the remix source. Notes for changing parameters: When increasing the dimensions, make sure the slots have…
I really like the original project by @jonnieZG The clip was prone to break because the walls were not connected, so I fixed it. OG: https://www.printables.com/model/104758-car-vent-gravity-phone-holder-v2
Stackable clothes hanger connection hooks can be used to hang on one clothes rack to connect the next.
The 3DBenchy Dry Dock (see origin of this model) requires you to use glue to affix the module, the base and the side panel. For those who don't want to use glue, you can print this connector pin which connects the module and the base by…
Magnetic butterfly wing jewelry concepted by my daughter--so we could have a matching set, to create a butterfly between us. See the pictures for her original sketch! Hidden magnets in the print create a kissing effect attaching the wings…
This model is compatible with the lego system.
The design by MishaT is amazing, fascinating and intriguing but it didn't take long for the pins to snap on two of the prints which I had made of this thing despite me printing out the latest version of the connecting bar, V2. Thinking…
Nicely working piston and connecting rod, use as you like just remix. The model was inspirated by the picture below, i did not know how to make the bolts to connect the model to the base so it would be nice if you can do it and post a…
Fitting for connecting 1/2 tube to 16 mm hose.
Connecting bracket with shelf cover, for lower loads. Warning! , I recommend print from petg or abs for higher strength Tested from pla, I have 95kg, but I recommend petg or abs
Connecting sleeve for the tool end side of the vacuum hose. Check out my profile, I have other Festool hose adapters as well. Print Settings Rafts: Yes Supports: No Resolution: 0.2 Infill: 50 Filament: Generic TPU Notes:…
Here are some joints that allow V-Slot and 20-20 aluminum extrusion to be connected together in order to create framing structures. This thing is set as a "Work In Progress" until I can create and upload all of the parts. I also intend to…
Connects a 2.5" vacuum hose (I have a Ridgid HD1280) to a Bosch Miter saw (I have the GCM12SD).
Fusion 360 file is attached, you can edit as you wish: change the screw holes, remove embossing.. Prints without support, orientation is correct in the stl file. I managed to print this in ABS. It tends to bend, but increasing the chamber…
RC car steering connecting rod. It has the purpose to connect the knuckle to the steering rack. it is universal, print in place.
Hope the 1st part was fun for you :) https://www.printables.com/cs/model/861669-sidecar-velorex-560 As usual the model part consist a big parts but the very small also so pay attention to the description and attached pictures. As usual be…
Hi there, here is my design of a piston/connecting rod assembly based on a Subaru EJ20 STI motor. These parts were designed through the Onshape CAD software. Printing Instructions: 0.12/0.2mm layer height depending on your desired detail.…
Simple bracket for connecting 2 LACK tables from IKEA. No drilling, no screws required. Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: Yes Resolution: 0.2…
a small painting aid that can be attached to the tabletop or connected together
Normal print settings, no supports! Very easy print! Enjoy!
Just a couple simple connector rods, was going to glue them in but they were snug enough of a fit I didn't bother. tried to make them blend in with the regular model and not botch it up too much. Hope it saved you a few minutes. Version 2…
These interconnecting links can be joined to form a fun toy chain that can be manipulated in may ways. Built-in detents allow for 5 discrete part positions per link. Print multiple links and simply press together to link. Print Settings…
Jigsaw puzzle coasters that can be connected to make even bigger coaster. Print as many as you want to make the size you need! Print specifications: Layer height: 0.2mm Infill: gyroid 15% Supports NOT needed
The wide base goes inside the head. The round, smooth part should sit loose inside the hole of the lower jaw (that's where the lower jaw rotates) - the diameter of this part is 1cm (to make it easy to rescale it to the size you need -…
Connecting part for rails. Fits well with Brio rails.
With my son over for Thanksgiving, we pulled out Castle Panic, one of the games we used to play a lot when he was a kid. We had a blast but Tawnos76's great towers and walls kept getting knocked around. I ended up remixing the parts by…
A replacement connecting piece for Ikea's Vilmar chair 12 oct 2018 : design modified for easiest print, avoiding overhang Print instructions Category: Replacement Parts Summary A replacement connecting piece for Ikea's Vilmar chair 12 oct…
For Deerma DX700S Small part that connects vacuum with ‘pipe’. Original part brakes after couple months.. This printed part last from when I printed it 6 months ago.
Connecting pipe for hose diameters of 22, 23, 24, and 25 mm.
General Information I drew the model in Autodesk Inventor. I can confirm that it holds at least 80kg. I made the connectors for: wooden sticks with a 19mm diameter wooden board with 20mm thickness But you can change the dimension as you…
Fits the wago connectors listed below https://www.wago.com/gb/installation-terminal-blocks-and-connectors/inline-splicing-connector-with-levers/p/221-2411
Enhance Your 3D Printer Frame with Precision Engineered Aluminum Plates When it comes to perfecting your 3D prints, having a stable and reliable printer frame is paramount. Our Corner Plate and T-Plate Set, meticulously designed for 3030…
I designed this to connect an EFHW to a sotabeams tactical mini mast. This allows the antenna wire to freely flow on the mast tip without snagging and so the EFHW to be adjusted based on conditions to inverted L, sloper, inverted V with…
This is V5 of a prosthetic leg for a chicken who has lost her foot in due to frostbite. Otherwise a healthy hen. It is very much not refined and needs a lot of work. I plan on adding better versions in the future. I'm including previous…
No screws needed; needs to suit tightly. Just print and assembly. Category: Organization
noscrews corner bracket for connecting 6mm sheets
added some supports to the shelf as i broke a few of Antoine's shelves when i had to remove them from the wall and reattach. with these new supports, i haven't had any issues. Print with organic supports.
no support needed Parts list: Screw M3x12 - DIN933 material: brass Screw M3x20 - DIN933 material: brass Hex Nut M3 - DIN934 material: brass Washer 4 - DIN125 material: brass (bigger by purpose) Copper wire d=2mm, L=66 mm (manually bended…
Interconnecting Thread and bobbin holder for cross-wound thread. Several sizes and designs are included. The larger size fits the larger spools of Gutermann Mara thread and a matching bobbin. The smaller version will fit other similar…
I was having issues ensuring that my filament was long enough when it entered from the top of the enclosure. This allows a PFTE tube to be connected, creating slack in the filament and ensuring the nextruder doesn't report a crash…
Shape your garden landscape by connecting these 22cm wide planters in any form using their dedicated plug connectors. The planter includes a drainer for improved water management.
Connecting pin for perimeter pipes of the pool structure. For selected brands of Intex pools. --------------------------------------------------------------------------------------------------------- Náhradní jistící kolík pro bazény…
Piston with connecting rod Pendant
Malou upínku Powerfix z Lidlu jsem předělal na možnost upínání vodící lišty ponorné pily. Spodní čelist lze nahradit vyšším kusem, aby bylo možno upnout na tenčí stůl. Spojka lišty sice není tak pevná, jako ocelová, ale zase nestojí 500…
BBC's Micro:bit is a lovely little platform to power simple yet clever projects. You can use the two real-life, physical buttons and display information using the LED grid only. But you can achieve more if you plug external peripherals,…
Kato offers viaduct tracks with a height of 60mm (track base above bottom). At same time and by whatever reason T-Trak-modules, that are heavily based on Kato’s Unitrack system, are defined at a height of 70mm. Isn’t this crazy? But here…
Well, print with 15% infill Use 8 mm bolts to tighten
Shape your garden landscape by connecting these 22cm wide planters in any form using their dedicated plug connectors. The planter includes a drainer for improved water management.
There are locks with different width. Try lock with different width when lock wont fit
Spojovací tyčka na závit 430 mm
Ditch the zip-ties and rubber bands for this slightly more refined solution to protecting your crankcase during top end work. These projectors quickly clip on and off of the engine studs when performing top end work to protect your engine…
These minimalist corner brackets are a practical and discreet solution for reinforcing right-angle joints in furniture, particularly for attaching shelves to side panels. Designed with simplicity and functionality in mind, they are ideal…
The connecting plate, for example, for wood, with external dimensions expressed in millimeters: 100x50x5. It has eight holes, one larger with a dimension of 20mm and one smaller with a dimension of 10mm. For achieving high strength, it is…
nut and bolt M4 max rod width 6mm Category: Bathroom
The connecting plate, for example, for wood, with external dimensions expressed in millimeters: 100x50x5. It has eight holes, one larger with a dimension of 20mm and one smaller with a dimension of 10mm. For achieving high strength, it is…
build blocks allow you to crates structure and forms almost anything you can think of with these blocks. great for all ages can help devolve motor skills, spatial reasoning, creative thinking, engineering skills. how to use simply connect…
The original joint that connects the tube and the head on the vacuum cleaner broke, because of this the head fell off and could no longer be used. I designed the repair piece based on the sample, which fits perfectly and tightly in place…
Parts list: Screw M3x12 - DIN933 material: brass Screw M3x20 - DIN933 material: brass Hex Nut M3 - DIN934 material: brass Washer 4 - DIN125 material: brass (bigger by purpose) Copper wire d=2mm, L=58 mm (manually bended for screws…
I picked up some old cabinets for my basement and there were some missing assembly pieces so I modeled some.
Mount for the 16mm Ball version
This is a crankshaft for the 2jz engine but without the exact dimensions as in the real engine.
Cover for the INLÄGG connecting fitting of an IKEA KALLAX desk combination.
I always felt the Fischertechnik 7,5mm building blocks could need a complementary building block that would allow to not only use them for additional distance, but also as building elements in their own right by enabling perpendicular…
Replaces a central part of the beautiful design classic KSM 1 coffee grinder. The part fastens the metal bowl to the machine. Might work for other Braun coffee grinders from the KSM line, particularly the KSM 11 seems identical apart from…
This fun Valentine's Day necklace consists of two hearts that connect together in the front via magnets that were embedded during the printing process (no clasp needed). The design is meant to fit magnets that are promoted as being 3mm by…
Wystarczy wyciąć w oryginalnej zakrętce otwór fi 20 i kupić oring 20x2 (może być 20x1,5, 20x1). Syfon musi posiadać zawór zwrotny, czyli po prostu gumową kulkę. Just cut a 20 mm hole in the original cap and buy a 20x2 O-ring (it can be…
A ginger bread man that's like one of those little linking monkeys. you can print multiple of them and chain them together as some sort of decoration
I liked the design from ViperMan but wanted a couple changes: A stronger connection between the bottom and top pieces Indented numbers so I can paint them without the top scraping off the paint The top and bottom weren't staying connected…
biellette de réparation pour bouche de ventilation
https://www.instagram.com/p/CpxeDtRItAA/
1 2 3 Block. Bolt together using a method I've seen on a youtube video. This is just a bit of fun, they are probably not that useful for anything. Maybe if you don't need super accurate tolerances. That said, they do connect up pretty…
Here is a remix of Lego steam train connecting rods for: Lego Emerald Night (set #21344). The holes for this connecting rod are at stud positions 1-2-5-9. For this train you will also need to print the "2x5" connecting rod from the…
M60x4 threaded boss for connecting a Henry hoover style hose to. I used it to connect to a cyclone dust separator I got off Amazon.
my chair broke, and i fixed it using this print recommended print settings: 0.2mm layer height 80% infill honeycomb/grid infill make sure to pic the right nails here's a youtube video I made, demonstrating the capability of this model:
Designed to maintain a consistent style with the original model. Print vertically. Turn on the brim.
See this connector applied:
EN: One piece went missing for connecting the brush and vaccum cleaner Sencor SVC 8616GD so I sit down and model it and now you can print it as well. I hope this will help you to make it cleaning your room again :) CZ: jeden dílek…
This is a simple replacement part for the Hegner Multicut 2s
at one time I bought a lot of Nika drying boards, but over time the green legs of these boards began to break from regular use, so in order not to throw away these dryers, I decided to make this model. I recomend use PETG or ASA
No support needed.
Drawer frame includes slots for 5mm magnets on the corners to connect to other drawer frames, and 2 drawer slots. Drawer is included in a separate file
These are files for the borders to Catan. They should be able to connect with the Connecting Catan Board Game that is also on my profile. You will need to print three of each file.
RC car steering connecting rod. It has the purpose to connect the knuckle to the steering rack. it is universal. The pitch 32mm. If any part breaks.
