Wyniki wyszukiwania: cour

Tennis court

The included .gcode includes color changes shown in the photo.

Peco curved track templates HO/ Gabarits de rails courbés Peco H0

These Peco rail templates help you trace and lay Peco flexible rails following the 3 curves used in Setrack: the R2, R3 and R4 curves. There are also templates for connectors between each of the curves, e.g. R2 to R4. Please note that…

RC short course truck 'easy-flip' roof rails

One of the biggest pains when using RC cars/trucks is when they flip over and you're not very close to your vehicle. This can be when bashing out with your buddies or when at your local track up on the driver's stand. With short course…

Basketball Court 1:200 Scale

Scale model basketball court for use in architectural models or as a desk knick knack to visualise that perfect short!

Courier-Chess Expansion

Print the pieces with spiral vase mode enabled, as well as sequential mode. In each color, you'll need: 1 sage 1 fool 2 couriers 4 pawns Print the bases with no top, no infill, and 0.6mm of total bottom thickness. Use sequential mode and…

Apple Cord holder for 0.5" table (with hexagons of course)

I printed on 10% infill with PLA filament No supports are needed if the hexagons are facing forward on the build plate and on the upper side of the model. Printed on 0.15 mm Structural I have attached GCODE for the MK4 and MK3.

Reformed Courier-Spiel Chess Expansion

Purpose The game requires several extra pieces that aren't included in a standard chess set, so here they are. These designs are based on Corinthian helmets and dory spears. Manufacture Print the pieces with spiral vase mode enabled, as…

8x12 Courier Chessboard in 4ths

This is a four-piece 8x12 checkered grid of 30mm squares, for playing the extra-wide and extra-fun game of Courier Chess. If 30mm squares are too small for you, then consider my Executive-size Modular Chessboard (with 45mm squares) or…

Racquetball Court With Court Lines

Dimensionally accurate racquetball court with court lines. I personally used added text in PrusaSlicer to add names for a personalized gift. The court_personalized file has the text “Racquetball Legend” where you can add a name…

Modular Crawler Course RC

First attempt at building a modular course. made it free for anyone else looking to build one on a budget. Should work great for 24 and 18 scale crawlers. I printed mine without supports and 0 infill to speed up the printing time and save…

Court of Owls mask

consider supporting me on my Patreon http://www.patreon.com/wekster

Velaris bookmark - A Court of Thorns And Roses

My wife love book series Court of Thorns And Roses and when i can't find any nice bookmark so i created one. i create 2 versions v18 - velaris in circle and bottom of bookmark with text “to the stars who listen. And dreams that are…

Hole 1 - Mini Golf Course

This is the 1st of 9 Holes of my Mini Golf Course. I made this video of the Hole 1 so you can see how it works: https://www.youtube.com/watch?v=paLyoNTc0Zk This hole is designed: to be printed in one part (fits in diagonal 240x240 mmm).…

Court Tennis Pickleball Phone holder

Inspired by something i saw on Instagram, original didn't publish the files. But objective is to place over the net in the corner, insert your phone and record / take photos. T - Side is for tennis aimed to the centre T of the court on…

Courtyard of the Lions , Alhambra - Granada , Spain

🇪🇸 ¡Bienvenidos a Granada, España! Welcome to Granada, Spain! Roberto from @MaquetasCNC brings to the MiniWorld3D catalog an all-time favorite and top attraction: The Alhambra of Granada , in southern Spain! Specifically, this is a…

Rigid3D Anka 1/10 RC Short Course Truck

Anka is a mostly 3d printed 1/10 RC Short Course Truck which is inspired and remixed from the excellent Tarmo4 project. (You may reach the Tarmo4 project's details from here .) If you are a terrible driver like me, this hobby might become…

Radahn's Starscourge Greatsword - Dummy 13 Sword

The Greatsword of Radahn aka the Starscourge Greatsword, scaled to be a Dummy 13 weapon. Curved greatswords of black steel wielded by General Radahn. A pair of weapons decorated with a lion mane motif. Radahn earned considerable renown as…

Hole 2 - Mini Golf Course

This is the 2nd of 9 Holes of my Mini Golf Course. Every hole is designed: to be printed in one part. to be played with a single stroke. to be printed without supports. I made three different intensities for the teebox, start with the…

Courage the Cowardly Dog

Technology: FDM/FFF Layer height: 0.2 mm Infill: 15–20% (Cubic or Gyroid pattern for strength) Supports: Yes Material: PLA recommended for easy printing and detail

Suzuka International Racing Course

This is a faithful reproduction of the Suzuka International Racing Course. Its dimensions are 20cm long, 10cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple…

A Court of Thorns and Roses - Bookmarks Set

__________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…

Imperial Courier 2 Part (Elite Dangerous)

Imperial Courier model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…

RC SkidSteer- Ninja Warrior Obstacle Course

This obstacle course is intended to be used with the 3D Printed RC SkidSteer V3.0. The boundaries are universal links that can be used to make your course outline. The obstacles can be added in whatever order you prefer. The clip system…

SCX24 - Crawler Course Gate Set And Stackable Cones

Here is a set of Crawler Course Gates that can be used in your scale RC crawler course builds. The gates included in this set number Gate 1, through Gate 15. Each of the numbered course gates, are a pair. Meaning each pair includes the…

Mini Mini Putt Putt - Modular Tabletop Golf Course (Starter Set)

Mini Mini Putt Putt (Starter Set) An endlessly-configurable modular mini putt course for your tabletop! 10 configurable components, including obstacles and interchangeable pieces Add a fairway (model grass mat, fabric, EVA foam) for a…

Small box with hinged lid (from Prusa Fusion 360 course)

This is my box. There are many like it, but this one is mine. I used my Prusameter points to sign up for the 3D Modeling in Fusion 360 course as soon at it was available. The first sample project was to make this box from scratch, and at…

Holy Wand Court Emblem - Sousou no Frieren (Frieren: Beyond Journey's End) - MSLA or FDM (I guess?)

This is for people who want extra props while cosplaying Frieren. This prop is a small necklace with fine details. PRINT IN RESIN String a leather cord through the top loop to make it into a necklace.

Ignis, The Scourge of Cinderpeak – D&D Miniature

Ignis, The Scourge of Cinderpeak Forged in the volcanic depths beneath Cinderpeak, Ignis is more than a dragon — he is a cataclysm incarnate. His wings stretch wide like burning banners, his scales shimmer with infernal heat, and his roar…

Suzuka International Racing Course, Japan, Formula 1 Race Track 2022 Season

Suzuka International Racing Course, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Mini Basketball court

If you need to create a mini basketball court with hoops check out these files. Important notes about printing: The Court is the max size that will fit on a Prusa MK4. It is a two tone layer shift model. Print the base in a wood tone and…

1910 Harris County Courthouse - Houston TX, USA

🇺🇸 Welcome to Houston, TX! This model was made by Nick Iland of @iland_design . The Harris County Courthouse of 1910 is in the Classical Revival architectural style and has six stories. Two courtrooms inside are two stories each. It was…

Llavero Digimon - Emblema del valor/ Digimon's Courage emblem Keychain

Llavero inspirado en la serie de animación Digimon, con la posibilidad de imprimirlo completo o por partes para hacer cambios de color para esas impresoras 3D mas básicas. Keychain inspired by the Digimon animation series, with the…

Cardboard Parcours

Design by: Anna Reumann (Member of ZDKderPHB) These practical holders can be used to build a course for autonomous robots out of cardboard boxes. The design was adapted to Amazon packaging boxes (Thickness: 3mm). Super extension for the…

Killswitch Steam Deck Case Socket Rescource

IMPORTANT I just figured out how to share designs on TinkerCAD so now you can edit a copy of it yourself at https://www.tinkercad.com/things/1lYgeyISnTO I got tired of Waiting for D-Brand to release STLs of the attachment point on the…

Courage The Cowardly Dog

Supports are needed almost everywhere.

SCX24 - Crawler Course Gate - Start/Finish Gates

Start/Finish gates intended to be used with the SCX24 - Cone To finish off the Crawler Course you will surely need Start/Finish Line gates. Multi-Color Gates can be achieved by a simple filament swap to achieve the Black-White checked…

AoS - Scourge Objectives for War and Hammer

Objective markers, objective zones, and a carrying solution for them to travel. The carrying case is built to stack, so that tournament organizers can travel with multiple sets. The HolderBase is a few millimeters taller than it needs to…

Courage The Cowardly Dog Keychain

Courage The Cowardly Dog Keychain - Llavero Agallas El Perro Cobarde

Tinkercad Course Diamond Vase

https://youtu.be/w_CEYVwYOsg In this step-by-step video I am showing you how to create an awesome looking vase using Tinkercad even if you have never used a CAD program before. I have tried to talk and act so slow, that you are able to…

Basketball Court Keychain

Print specifications: I printed with 0.08mm layer height but I think it will be alright with higher layer height also If the court is not fitting, try increasing width and depth by 0.25mm, but it should fit firmly as it is

Fleur Delacour Wand

Fleur Delacour is a character from the "Harry Potter" series by J.K. Rowling introduced on The Goblet of Fire, she's one of the Triwizard's Tournament participants. Print "Fleur1.stl" at 0'1 or 0'15 layer height. You can print…

Frosthaven Summons: Banner of Courage

Here's my model for the Frosthaven summons, the Banner of Courage! This guy ended up needing a lot more support than I was hoping it would, but that's the way the cookie crumbles sometimes. It was a great learning experience, which I'm…

N-Scale: Tennis Court

This is a simple tennis court for a n-scale model train landscape. Print instructions Printer Brand: Prusa Printer: I3 MK3S+ Rafts: No Supports: No Resolution: 0.20 Infill: 100% Filament: Any PETG or PLA (I used PETG) Note: This print…

Basketball Court

a basketball court for decoration your room.

Ultramarine Emblem "Courage and Honour" - STL Pin for 3D Printing

¡Valor y Honor! 🔵⚔ Esta insignia fan art inspirada en los legendarios guerreros del futuro representa el emblema de uno de los capítulos más emblemáticos del universo de ciencia ficción táctica. El diseño fusiona el icónico símbolo del…

A First Thrill (Baucour, 1921)

Elden Ring Starscourge Heirloom

"A talisman engraved with a scene from a heroic tale. Raises strength. The mightiest hero of the demigods confronted the falling stars alone—and thus did he crush them, his conquest sealing the very fate of the stars." I converted an…

starscourge great sword 1:1 scale

starscourge great sword from genral rahdan himself its 1:1 scale i have print and will be uploading pics as soon as i have done painting it also make sure the parts are laid flat on the print bed in slicer as i was rushing when i cut the…

Isle of Man TT Mountain Course, United Kingdom, circuit, track

Isle of Man TT Mountain Course, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…

Gnome couronne de Noel

Choisissez la taille de votre impression sans soucis, imprimez en une ou plusieurs couleurs avec une hauteur de couche à 0.2 et un remplissage à 20%. A mettre sur une fenetre, un mur ou votre sapin.

Arcs Court cards stand

A stand for Court cards in Arcs board game

A Court of Thorns And Roses Bookend

Created this bookend using the cover art from A Court of Thorns And Roses, a series that has become very popular recently and that my gf loves. Due to the complexity of the design I couldn't use a cutout method and instead had to do a…

Chien courant - Hunting dog

This is a model made from a 3D scan and adapted. Supports are mandatory Enjoy Modèle réalisé à partir d'un scan 3D . Impression avec support obligatoire

WW1 British Courier on Motorbike

WW1 British Courier on a motorbike. Scaled to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a smaller nozzle and reduce…

SupremeCourt

The Supreme Court Building, located at One First Street, NE, in Washington, DC , is the permanent home of the Court.

Elder Pyroclast, Scourge of the Molten Peaks | 32mm & 75mm Fantasy Miniature | FDM & Resin

🐉 Elder Pyroclast, Scourge of the Molten Peaks Gargantuan Dragon (Fire), Chaotic Neutral Armor Class 22 (natural armor) Hit Points 496 (32d20 + 160) Speed 40 ft., climb 40 ft., fly 80 ft. STR 30 (+10) DEX 14 (+2) CON 30 (+10) INT 18 (+4)…

Cache prise courant enfant

Obturateur design pour vos prises de courant; parfais pour protéger vos enfants qui ne manquent pas d'imagination parfois pour aller mettre leurs petites doigts dans la prise. Simple et efficace, s’emboîte parfaitement. Celle ci est faite…

Ford Tourneo Courier

3d modellemede tekerlekleri çıkabilinip ayrı basılabilenen

Couronne de noel

décoration murale 3D

Flight Simulator Course Deviation Indicator

Here are the VORs/CDIs for a flight simulator. They will be configured with MobiFlight. View the build video here: https://youtu.be/Jq4_RMyj-hM The configuration video has not been published as of writing this. (I really just need to get…

Ford Tourneo Courier

Ford Tourneo Courier similar Ford Transit Courier Release 2014 Category: Vehicles

Eustace Mask From Courage The Cowardly Dog

Printed on a raft with supports for nearly everything. The masks are scaled to wear. I printed mine at 85% on my Ender 3 Pro and it fits my big face. The photo in the post is a render. I haven't finished painting the printed one yet.

Fleur Delacour's wand by printer42 organic support

Fleur Delacour's wand by printer42 organic support original model https://www.printables.com/fr/model/166124-harry-potter thanks to mikolas zuza for those test gcodes awaiting prusaslicer 2.6 entry just to find organic support gcodes…

30th Scale Crawler Course

A modular 1:30 scale 3D RC crawler course tile featuring a multi-level off-road terrain layout with realistic rock formations, logs, ledges, and crawl paths designed for technical driving lines. The terrain includes textured stone…

cache à clé prise de courant enfant

Obturateur pour prise de courant avec système à clé, pour éviter à l'enfant de venir le retirer, une fois emboîté, vous ne pouvez le retirer qu'avec l'aide de la petite clé. Adapté pour prise de courant de chez Legrand 45*45, mais je…

Czech Club Chess Set (Prusa Fusion 360 Course)

I used my Prusameter points to sign up for the 3D Modeling in Fusion 360 course as soon at it was available. The third example project in the course is to make this chess set , and at the end of the step-by-step instructions, the course…

Courage

Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This chibi Courage model captures the anxious but heroic…

Book stand A Court of Thorns and Roses

A book stand with the ACOTAR logo. Print the two pieces and stick it toghter. Print details: Infill 15% 0.15 mm layer heigh color change at layer 11 for the logo

WW1 British Courier on Horseback

WW1 British Courier on a horseback. Scaled to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a smaller nozzle and reduce…

Funny Sign - "Courage is knowing it might hurt but doing it anyway..." Dual colour design

Another Funny Sign in my collection - “Courage is knowing it might hurt but doing it anyway, Stupidity is the same. That's why life is hard.” , dual colour design, printed in OVERTURE Silk PLA Rose Red and ZIRO Black PLA. For more funny…

Courner Router Template, able to do multiple sizes (metric & Imperial)

This is a print of a tool i used to use and really miss in my current workshop. I therefore did a printed version. Comprises of a base plate and a handle. 2 Base plates are included, one metric with supports for R5, R10, R15 & R20. One…

Mini-Z Short Course Truck 4WD | Mini SC24 | 1/24 RC Car (Free version)

Guide available here: Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a…

RC work boat (Vlet) for Shell in port Harcourt

Dear fellow modellers, I am pleased to present my model of a small workboat (Vlet), one of three built for Shell in Port Harcourt. I admire these often-overlooked vessels, they work for decades, only to be abandoned and left to decay.…

Transformers G1 Scourge weapon/gun

A replacement/replica weapon for Transformers G1 Scourge. This is a nearly exact replica of the original toy accessory, modeled from reference photos for my G1 Scourge figure. Note - my G1 Scourge is the Targetmaster version, which has a…

Refueling Funnel for Ford Focus Fiesta Courier

Refueling Funnel for Ford Focus Fiesta Courier No Supports

RC Car Stand - Ideal for 1/10 short course truck and other models

Car stand to work on your RC Car in the pits or have it on display. The car tand can be disassembled so it can take up less space in your pit bag. I've been using this for a while and it's been pretty solid so far.

Modular "table top" course for 1/30th scale RC crawlers

All of the course sections were developed for my 1/30th scale Axial SCX30 Chevrolet K10 pickup but they are probably suitable for other 1/30th scale crawlers. This video shows the course being driven. Everything was designed using Fusion…

voiture de course/race car

voiture de course

Courgette - 3D Scan

A courgette. Also known as a zucchini, this type of marrow belongs to the cucurbit family along with melons, cucumbers and squashes. This courgette was scanned using an Einscan Pro 2X and the Industrial Pack Turntable in the iForge, the…

Circuit de Nevers Magny-Cours, France, former Formula 1 Race Track

Circuit de Nevers Magny-Cours, France, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Dummy/Vanity Wheels for NoPrep Drag cars or Shot Course Trucks

These are just some dummy/vanity wheels you can put on your drag chassis to make it look/sit semi realistically on the shelf while not being used, rather then have your race rubber tyres or sticky, smelly old rubber tyres sitting on the…

Matron Vexia the Soul Scourge - The Eightpints Wytch Coven

You'll face a lot of leaders in this world. Most are roaring, spitting, and angry. Not Vexia. She's the one who scares me most, because she's calm. She won't look at you like an enemy; she'll look at you like a flawed sculpture, a 'crude,…

69-70 Cadillac Deville Calais Interior Rear Sail Panel Courtesy Light Lens

1969 And/Or 1970 Cadillac Deville Calais Interior Rear Sail Panel Courtesy Light Lens Replacement Designed, revisioned and printed by me for a client over a year ago, never remembered to upload it. Customer installed it in their vehicle…

Boite couronne

Boite couronne Print instructions Category: Toy & Game Accessories Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 20 Filament: easyprint PLA PLA Pink

A court of mist and fury logo

Book by Sarah J. Maas

WWI American Courier on Motorbike

WWI-inspired American courier on a motorbike. Designed as a toy soldier. You may need to resize this model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you…

Venturi PHBG ultra court

Venturi ultra court 14,24mm d'épaisseur, ce vis sur le filetage du carburateur.

Gotik Dice Tower Small Courtyard Mod

This remix resizes the courtyard of the fantastic “ Gotik Dice Tower ” by @Kurt_7351 . The courtyard has been resized slightly compared to the original to allow for printing on small bed printers such as the Bambu A1 Mini. This was done…

Khanjarli Dagger (Prusa Fusion 360 course)

I used my Prusameter points to sign up for the 3D Modeling in Fusion 360 course as soon at it was available. The fourth example project in the course is to make this Khanjarli dagger , and at the end of the step-by-step instructions, the…

Hand-Carved Captain's Courage ornament from Sea of Thieves game

adapted and slightly tweaked model for easier 3d printing all parts have flat or almost flat side that supposed to lay on printbed except sails all parts should print fine with no supports important due to way i split parts its crucial to…

Corner Stake Replacement for Volleyball Court Ground Webbing

A model of a replacement ground stake for an outdoor volleyball boundary webbing such as "Park & Sun Sports Outdoor Volleyball Boundary Webbing with Ground Stakes". One of the originals broke so I modelled it, making the back part larger…

1981 Ford Courier U Haul, aka the YEE-HAWL

Yee can hawl it yerself Based on the puddin's fab shop 1981 Ford Courier U haul "box truck" It's not perfect, but it will do in my eyes. Enjoy! Category: Vehicles

All Alphabet Letters Upper case A-Z Font: Courgette-Regular by Google Fonts (OFL License)

Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…

Kitchen Rack Shelf Tray for Sponge Steel Wool Scouring Pad holder with insert for easy cleaning easy printable policka houba dratenka kuchyne drzak

Size-Hight 80 (D-90) Lenght 80 (D-90) Width 180 (D-190)mm. Inserts 1,2 for model D. For attach use double sided foam tape. For sponge, steel wool.... Tested PLA 0.2mm.

Courage The Cowardly Dog Cookie Cutter

You can cut your cookies into Courage the Cowardly Dog with this cookie cutter.

Everdell Boat Resized Recources Container

Everdell Boat Resized Recources Container for Typawesome47 organizer. Not sure if it fits in the standard plastic insert

Octokin pour concours !!!

fidget mollusque 🦑🦑🦑

DigiEgg of Courage

Source: https://www.models-resource.com/pc_computer/digimonmasters/model/5034/

Alfa Romeo 2600 Spider Borrani style wheel (Prusa Fusion 360 course)

I used my Prusameter points to sign up for the 3D Modeling in Fusion 360 course as soon at it was available. The second example project is to make this wheel, and at the end of the step-by-step instructions, the course invites you to…

Endless Collection "Courage"

Courage often finds its truest expression not on the grand stage of heroism but in the quiet moments of confronting life's relentless tide of challenges. It is the inner fortitude that compels a single step forward when every fiber of…