Wyniki wyszukiwania: covi

Sortowanie

450 modeli

P

DtM-v3.0 Face Shield PPE for COVID-19, Remix of Prusa RC2

The DtM-v3.0 face shield PPE design has been reviewed and approved for use by the USA National Institutes of Health (NIH). See also the design on the NIH website here: https://3dprint.nih.gov/discover/3dpx-013359 Files on this post…

Pobrania
2568
Polubienia
15
Ocena
4,86
P
Printables3DP

Coronavirus COVID Reusable Washable Face Respirator Mask

This mask can be used with a piece of textile or cotton pads as filters. You can also use it as a respirator if you have respirator filters. It's better to print with PETG or ABS so you can wash it in a dishwasher. Please print at 100%…

Pobrania
1535
Polubienia
29
Ocena
4,33
P
PrintablesLocofrodo

COVID-19 Mask/Respirator

BREEEAAATHE ... because the MARK III is here! 100% more filter area means 50% easier breathability. This will allow you to use different materials (follow links). Also there is now a seam between flexible and stiff part for perfect…

Pobrania
1280
Polubienia
76
Ocena
5
P
Printablesvulevu121

Coronavirus/COVID-19 Face Mask with Dual Filters

Face mask to protect against air born viruses like coronavirus. Mask is not a one-size-fits-all. You may need to print at different scales to see which one works best. Features: -Comfortable fit for extended use -Optimized strap buckle…

Pobrania
867
Polubienia
36
Ocena
4

COVID-19 Emergency mask with the use of cotton pads as a filter

This mask provides a valve for inhalation and exhalation that allows you not to accumulate moisture in the mask . I designed 2 mask sizes Adult/male and child/female. For printing, you will need Flex plastics, the best fit is TPU You can…

Pobrania
805
Polubienia
92
Ocena
4
P
PrintablesAaron K

COVID19 Headband x4 stack with improved adhesion and support

CHANGELOG: 4/2/2020: Updated the model to have more support between bands. This makes it a little harder to pull apart, but ensures that the bands adhere well to each other, as I found that some layers would not adhere and cause stringing…

Pobrania
801
Polubienia
0
Ocena
5
P
PrintablesRxR

clips visière pour casquette anti covid-19

Système de clips qui permet de fixer une visière sur une casquette standard. Pour la visière j'ai utilisé une feuille transparente percée avec une perforatrice de bureau standard (trous de 5 mm de diamètre). Le but est des pouvoir offrir…

Pobrania
774
Polubienia
13
Ocena
0
P
PrintablesRePeteeMe

Respiration Mask with Filter and Exhalation Valve (Covid-19) WIP

Hi there I hope you are still healthy. Because of Covid-19 pandemic I developed this printable mask. You can print it without supports and it takes about 5 hours to print all parts if you print it with 0.2 layers and 0.6 nozzle. I used a…

Pobrania
768
Polubienia
5
Ocena
3
P
PrintablesPavel Tajduš

Simple clip for face mask (Corona virus Covid-19 protection)

I liked idea of simple clip to make a mask. I dont have access to sewing machine, so I wanted to use a 3D printer. And I have ended up with Fusion 360 to model this simple clip. Its easy to print from PETG, and with 0,3 draft its also…

Pobrania
748
Polubienia
8
Ocena
5
P
PrintablesGhost91

Door opener - fight Coronavirus (Covid-19)

I designed a door opener to fight aganist the spread of the Coronavirus (Covid-19). You can avoid touching the doorknob with this 3D printed door opener! Please share this design so we can stop the coronavirus epidemic! Print instructions…

Pobrania
717
Polubienia
19
Ocena
0
P
PrintablesFlo4Print

Airtight TPU Mask against COVID-19 - Masque étanche TPU contre le COVID-19

Hi, in these troubled days when we are facing the coronavirus COVID-19 all over the world, we are facing a mass mask shortage. Some of my family members work in health care, and I was wondering what to do to help. So I decided to design a…

Pobrania
615
Polubienia
51
Ocena
5
P
PrintablesNakozen

Covid-19 Kit Card

Just a silly idea I had looking back and forth between my kits and the sculpted covid-19 virus on here by 'gregbejtlich', so slapped this together real quick! There is a small loop for hanging it wherever you may wish. It's a perfect snap…

Pobrania
555
Polubienia
199
Ocena
4,87
P
PrintablesCarsten

Lunar Map Mare Moscoviense (far side)

Using a map-a-planet image I created this quite hi-res model. Used spray paint and fine mortar to "dust" it. Wikipedia https://en.wikipedia.org/wiki/Mare\_Moscoviense "Mare Moscoviense ("Sea of Moscow") is a lunar mare that sits in the…

Pobrania
528
Polubienia
173
Ocena
5
P
PrintablesE-leton

Alien Covid-19 Face Mask

I am a big fan of Alien movies, so I made "Alien eating your face" style Covid-19 face mask that can work with any type of fabric. This is a fun project to make the Coronavirus memorable in a more positive way :) A fully functional mask…

Pobrania
491
Polubienia
284
Ocena
5
P
PrintablesAniki

Covid Hunter Mask

This is my first attempt at a custom face mask I made for myself because I couldn't buy any medical masks here in my country when the coronavirus breakout started. Since I had to make one, I decided to give it an agressive sci-fi look for…

Pobrania
455
Polubienia
186
Ocena
4,75
P
PrintablesMason

Covid-19 Mask

I decided to make this mask and filter and then upload them and its awesome you take a clinic mask and cut it in to 2.5 in squares and insert into the filter then attach the filter to the mask its awesome. to hold it on your face you can…

Pobrania
455
Polubienia
12
Ocena
5
P
Printablesl.pekarek

COVID suction adapter for dentists

Check out our latest version at www.asana-dental.com Dentists are among the most vulnerable group of the population due to disease infections. The main reason for this is the exposure to infectious aerosol, which arises when drilling…

Pobrania
454
Polubienia
15
Ocena
3
P
Printablesn3zwork

Face mask with filter active carbon anti covid-19

THE MASK IS NOT A SUBSTITUTE FOR PROFESSIONAL MASKS I modeled this mask on my face They recommend using a HEPA filter because it guarantees greater protection (as a filter I used a layer of non-woven fabric and an active carbon filter).…

Pobrania
445
Polubienia
6
Ocena
0
P
PrintablesDamiano_PL

Hook for drying rack - perfect for COVID19 masks

Hello ! I created simple but reliable hook for drying rack. It's designed that way for better air circulation when you are drying the COVID masks. I use that by myself and it's very helpful. Feel free to comment and if You like it please…

Pobrania
419
Polubienia
21
Ocena
0
P
Printablesderzoelli

Ski Helmet Covid mask clip/holder

So the season just started, I had 2 skiing days and I was already annoyed by the mask straps behind my ears. If you wear a face mask (which is mandatory at my resort) under your helmet all day long, your ears are going to hurt in the…

Pobrania
415
Polubienia
59
Ocena
5
P
Printablestesla3dlabs

#RESISTANCECOVID RC4 - Prusa Protective Face Shield - RC1 RC2 RC3 RC3.1 - easy shield FIXATION & ROTATION

REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…

Pobrania
401
Polubienia
0
Ocena
4
P
PrintablesStanaP

Covid-19 3D model

Model of Covid-19 cell.

Pobrania
387
Polubienia
64
Ocena
4
P
PrintablesLASCA

COVID RC3:MX FACE SHIELD

UPDATE: -Added the DXF file of the sketch to reproduce in laser cutter. -Template of the shield also updated for cutting it on vinyl cutting machine using 10 pt. PVC plastic. 13 apr. -Updated the template for cutting out the PVC / PET…

Pobrania
345
Polubienia
1
Ocena
4,5
P
PrintablesArjun Melwani

COVID KILLER 1.0 - 3D Printed Automatic Hand Sanitizer Add On

Automatic hand sanitizer pumps cost upwards of $50 USD. The design consists of 10 different parts that snap together with the snap-fit connectors I designed. The snap-fit connector (iterated way too many times) allow for the parts to fit…

Pobrania
333
Polubienia
84
Ocena
0
P
PrintablesMario87

RC3 Covid-19 with Prusa Cover

This is the Prusa RC3 headband with Prusa RC1 cover combined into a single STL. The cover has been oriented in such a way that stacking of these headbands should work without problems.

Pobrania
329
Polubienia
1
Ocena
3
P
PrintablesRETROCUTION

No Touch Clean Key - COVID KEY

This is a tool for opening doors and pressing buttons on keypads without using your bare hands.

Pobrania
325
Polubienia
14
Ocena
5

"I Survived Covid-19" Trophy

Remodeled this from my old design to improve the form of the base and optimize the actual covid molecule's size making it less massive (not the same model). This little guy needs all the supports you got, plan on setting your supports up…

Pobrania
319
Polubienia
144
Ocena
4,5
P
PrintablesDiAleksi

Covid19 face shield without spikes for holes

There are many versions for face shield headbands. But all of them require making holes into the protective sheet by punching or laser cutting. Too complicated in my opinion. Here is my version of the headband without pikes for holes,…

Pobrania
298
Polubienia
2
Ocena
0
P
Printablesneoplc

COVID cutter

Enjoy Baking :)

Pobrania
296
Polubienia
52
Ocena
5
P
PrintablesJLC

Adjustable Headbands for the Prusa V3 Covid19 Face Shield

I have included my project files for each of these, but you are welcome to use and/or change them in any way you’d like. All I ask is that if you redistribute them, please mention me as the original creator. If you decide to sell them,…

Pobrania
294
Polubienia
0
Ocena
0
P
PrintablesHAL_9000

My take on Corona Virus Coronavirus Covid-19 NO SUPPORTS (Assembly Required)

This is my interpretation of the COVID-2019 Coronavirus. Being stuck at home because of this stupid thing, I decided to make a macro plastic version of it.I took inspitation from images online of the corona virus and…

Pobrania
288
Polubienia
29
Ocena
5

Corona defeater, covid-19, SARS-CoV-2

Print it out and give it to your friends, we will defeat the disease! I gave it to the delivery drivers, these people now have a hard job. V1.1: added a stand inbuild little support V1.2 little better support added a ring Print…

Pobrania
285
Polubienia
25
Ocena
5
P
PrintablesTouchWARE

COVID - ONX Protective Shield (16/20 shields per day on i3 MK3S!)

This is a protective shield optimised for fast printing on FFF 3D Printers without supports from PET-G. STL models for printing 1, 8 and 10 shields at once. Printing 1 shield (top+bottom) takes only about 1 hour and 30 minutes. Printing 8…

Pobrania
281
Polubienia
1
Ocena
0
P
PrintablesMartin L.

FFP2 covid19 ear saver

This saves your ears when wearing your FFP2 masks for longer than just a minute :-) Print it using PET (around 30minutes): no post-processing as PET is flexible enough to bend over your head. Small enough for a print on a Mini! You want…

Pobrania
281
Polubienia
30
Ocena
5
P
PrintablesBoltian

COVID-19 - Boltian Goggles

These are hard days for all and for overall, for the sanitary staff in the hospitals, nursing home, clinics, cleaner, and everyone who contributed to minimize the effects of this devastator virus. Today the material used to protect to…

Pobrania
277
Polubienia
20
Ocena
0
P
Printablescaesar_1111

Massage Roller v2 - multiple rollers - smooth grip - Covid-19 usable - 50mm wide - with or without 608 bearings

This is a remix from https://www.thingiverse.com/thing:398515 I initially printed the 608 bearing version of the original design. After showing it to my physician, I decided to do a v2 to include all the recommendations I got: wider…

Pobrania
270
Polubienia
60
Ocena
5
P
PrintablesNoisettetbou

Covid 19 protection shield

Here is a simple Covid 19 protection shield without clips and elastics. Easy and fast to print (3 shells recommended). Voici une visière de protection Covid 19 simple sans clips ni élastiques. Facile et rapide à imprimer (3 contours…

Pobrania
266
Polubienia
0
Ocena
0
P
Printableselod

COVID-19 Mask with Dechatlon Subea Snorkel and 3M particle filter

You can use 3M 5911 P1R or better 3M P3 particle filters with the SUBEA snorkel mask found in Decathlon. It has a big valve to prevent moisturizing from breath the filters and bacteria deposition. The Air always flows in one direction,…

Pobrania
259
Polubienia
5
Ocena
0
P
PrintablesRastl

Fifth Element Multipass Covid Vaccination Card Holder

This is yet another 5th Element inspired Covid vaccination card holder remix. You will need glue to assemble this. I recommend superglue/CA. I made 3 changes to the original: 1 - I made the indent to hold the filament bar deeper to secure…

Pobrania
247
Polubienia
70
Ocena
4
P
PrintablesRomanA

Covid 19

Držák roušky

Pobrania
240
Polubienia
14
Ocena
5
P
PrintablesMakeThings3D

HygiGrip gemeinsam gegen Coronavirus (COVID-19)

Infos, Bilder und Videos findest du unter: https://www.caliheat.de/shop-1/hygigrip/ Update: 01.04.2020 HygiGrip_Schieber_V2 mit mehr Toleranz​

Pobrania
230
Polubienia
9
Ocena
5
P
PrintablesLuckyco

Covidisneuf

Hello everyone, to play down a little, I imagined, designed and printed our little Corona that I personalized. Easy to print without supports, in kit or in one piece (SLA) Print as placed on the tray, 1 time each piece and 23 x Coronapic…

Pobrania
226
Polubienia
13
Ocena
5
P
PrintablesMatthew Ray

Faster Print, DtM-v3.1 Face Shield PPE for COVID-19

MAKES 2 SHIELDS with a ~1h 20m reduction in print time. NEW VERSION helps for better build plate adherence on the MK3S. I've updated this to drop the print time down to ~3h 40m for 2 on an MK3s. THIS IS A REDUCTION OF ~1h 20m!!!! for two…

Pobrania
223
Polubienia
4
Ocena
5
P
PrintablesJon Lê

The DoomScroller, a smartphone tripod for the COVID-19 pandemic

Moved to GitHub 2024-01-10: All future updates will come through GitHub: https://github.com/jon-le0234/DoomScroller The work started growing too fast to manage two projects each on Thingiverse and Printables, so moved everything into one…

Pobrania
222
Polubienia
45
Ocena
4,75
P
PrintablesShared Objects

Face Shield Visor - Minimal Assembly - COVID-19

There are a lot of awesome face shields being created by the community to help our COVID-19 medical heroes and essential workers. I noticed that most require multiple steps and tools to fully assemble. I wanted to design a super…

Pobrania
221
Polubienia
1
Ocena
5
P
PrintablesChainsaw

Canadian COVID Mask

Supports required for the Filter Cap only. Valve mold can be used to create silicone valve. Mix 2 parts 100% silicon to 1 part corn starch and clamp mold. Wait 1-2 hours before removing from mold. If 3D Printing valve it is best to put a…

Pobrania
221
Polubienia
14
Ocena
0
P
PrintablesQuicksilver

Gyroid Stress ball 60mm- relieve your stress about Corona / Covid-19 virus

Keep your stress levels down while you stay at home to protect yourself from that Virus. Stay Safe, play with your ball(s). Category: 3D Printing

Pobrania
221
Polubienia
14
Ocena
4,5
P
PrintablesGeoff Shorts

Covid Family Feud

Need something fun and educational to do with your family while you're in quarantine?? Look no further! Covid Family Feud is here to save the day! Just like the classic TV show, take turns guessing the most popular answers to funny…

Pobrania
215
Polubienia
113
Ocena
5
P
PrintablesRick

COVID-19 Face Shield Strap Clips

I designed these clips to attach to the Prusa face shield allowing me to use 1" (26 mm) webbing to create an adjustable head strap. Print instructions These clips work fine printed in PLA. I'm sure PETG would work as well but I haven't…

Pobrania
213
Polubienia
4
Ocena
5
P
Printables3DPrintBunny

Covid19 Christmas Bauble

Covid19 Christmas bauble to go on the tree. Slots together, no need for glue You can hang it using string or print out the hook It is 6cm tall and can be printed with no supports You can find the display tree on my profile page here:…

Pobrania
198
Polubienia
44
Ocena
0
P
PrintablesRC builder

Covid-19 Mask Strap II

After testing by med personnel the mask retainers (clips) have been modified to ensure more stabile mask hold even when manipulating the mask. Print instructions No special requirements, infill 10-15%, 0,2mm speed. Included gcode file…

Pobrania
195
Polubienia
19
Ocena
4,5
P
PrintablesJerlo

MASQUE JERLO REMIX ANTI-COVID19

Pour les masques : Impression en 0.3mm Remplissage : 15% périmètre : 3 Pour les clips : Impression en 0.3mm Remplissage : 15% périmètre : 1 4 Clips par masque 1 Feuille A4 transparente 180g posée à l'horizontale 1 Bande élastique de 27cm…

Pobrania
193
Polubienia
1
Ocena
5
P
PrintablesStuffMaker2

Covid-19 Mask

I made some slight changes for comfort to this design: https://3dprint.nih.gov/discover/3DPX-013308 Which is a remix of these: https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2 and the…

Pobrania
189
Polubienia
2
Ocena
3,5
P
PrintablesRyan Stinebaugh

COVID-19 Survival Kit

As COVID-19 circles the globe, you're going to need to take the proper precautions when out in public. This kit allows you to best prepare yourself to stay healthy. Features: Refillable Hand Sanitize Compartment (27.5mL) Refillable Clorox…

Pobrania
188
Polubienia
28
Ocena
0
P
PrintablesRC builder

Covid-19 Mask Strap

Remixed version of a mask strap. Lighter, more flexible, a bit longer, modified hooks. Print instructions No special requirements, infill 10-15%, 0,2mm speed. Included gcode file prints 5 pcs.

Pobrania
182
Polubienia
13
Ocena
4,67
P
PrintablesKey Guy

keyring flower / vaccine covid

This keyring is printable with a MMUS2 or with an original Prusa. Just a dub of glue and it will stay there I posted also a “negative” version just for fun ;) enjoy

Pobrania
181
Polubienia
19
Ocena
0
P
PrintablesRxR

Visière v83 covid_19 dérivée de Shield v16

Cette visière est une version dérivée de ce modèle : https://cults3d.com/fr/mod%C3%A8le-3d/divers/shields-anthony-seddiki-covid19 Ce modèle est compatible avec les clips de la shield v16 et les clips de ce modèle sont compatible et…

Pobrania
178
Polubienia
6
Ocena
0
P
PrintablesPiotrRago

Covid 19 Vaccine Syringe Pen (BIC)

Covid 19 Vaccine Syringe Pen (BIC) Supports needed Supports and support blocker added to the file

Pobrania
173
Polubienia
43
Ocena
0
P

Prusa RC3 COVID shield with buckle and stud

RC3 Shield, added a buckle for elastic or even IV tourniquet (credit Audoen Maddock, MD). Left the stud on if you want to use pre-perforated elastic. Print instructions Same settings as the RC3. 0.25 mm layer height, 30% infill, PETG.

Pobrania
172
Polubienia
0
Ocena
0
P
PrintablesAnneMarc

Modified PRUSA splash shield (US-Letter, slip prevention) COVID 19

It works with a simple clear binding/ slide sheet, hole punched manually with a regular 3-holes puncher. We modified the stl file of PRUSA -US Letter model of a splash shield / guard. It is a less tall than the original model. It has an…

Pobrania
170
Polubienia
0
Ocena
0
P
PrintablesMartin_au

The Card-i-Glove wallet (Covid-19 contact minimisation for bank cards)

Tap and Go or Contactless card transactions are widely recommended as the safest option when shopping. However, many machines still require that you press the card against the machine. The Card-i-Glove is like a glove for your bank card.…

Pobrania
168
Polubienia
20
Ocena
5
P
Printablesl.pekarek

COVID suction adapter without retractor

Check out our latest version at www.asana-dental.com This is a version without retractor, which is more suited work work with a dental dam.

Pobrania
167
Polubienia
4
Ocena
0
P
PrintablesPatrik Zak

Pfizer BioNTech Moderna COVID-19 vaccine vial tray holder

‼️ Beware! Do not store at extreme negative temperatures. Only for chilled use. 🧠 The first idea came from the design https://rokycany.nemocnicepk.cz/tiskove-zpravy/problem-nestabilnich-vakcin-vyresili-3d-laborator-zapadoceske-univerzity/…

Pobrania
167
Polubienia
14
Ocena
0
P
PrintablesPeterV

COVID-19 RC3.2 8 piece with 0.15 layer heigth for chamfers, 2 perimeters and 5% infill

This is modification of the Prusa Protective Face Shield - RC3.2 - stack versions . It has added layer height modifiers to decrease the layer height to 0.15 for the bottom chamfers on each part. It only affects first three layers of each…

Pobrania
166
Polubienia
1
Ocena
5
P
PrintablesRaduG

FACE-SHIELD/COVID-19 SHIELD

A little remix of Prusa face-shield and a redesign found on a blog, bowth link here: - https://www.prusaprinters.org/prints/25857-prusa-face-shield -…

Pobrania
166
Polubienia
1
Ocena
0
P
Printablesu01pei

Cut template for Prusa Covid19 shield

two templates to mark the cut lines for the lower and upper side of the Prusa shield. Two separate files, because the whole shield size (240x240) does not fit on the build plate. Especially the curves are difficult to make perfect without…

Pobrania
164
Polubienia
4
Ocena
5
P
PrintablesFr3D

Corona Covid-19 Doorstop

To stop Covid-19 spreading further we need to actively watch our hygiene and especially touching public things like doorhandles. We all know that staying at home is the best, but there are people out there who have to work to help the…

Pobrania
163
Polubienia
3
Ocena
0
P
PrintablesJuanjo

Fake Flute for pracctice7 Flauta de prácticas no produce sonido COVID FREE

Esta flauta esta diseñada para la practica de la digitación. No se puede soplar y por tanto no produce sonido. Con el COVID no pueden estar todos los chicos y chicas en la clase soplando a la vez. Lo mejor es imprimirla en vertical. No…

Pobrania
161
Polubienia
11
Ocena
0
P
PrintablesMark McIntyre

No Coronavirus (COVID-19) Sign

No Coronavirus (COVID-19, SARS-COV-2) allowed! Decorate your home, home office, or workspace with this sign that lets everyone know coronaviruses are not welcome! Put it beside a sink to remind the household to wash their hands…

Pobrania
159
Polubienia
8
Ocena
5
P
Printablesangelo 83

box for covid masks

I thought of creating this box to store the new or used surgical mask for disposal. also comes inside a washable reusable mask even if I always recommend to pay attention to the use of ps masks .... do not leave your used masks around if…

Pobrania
159
Polubienia
10
Ocena
0
P
Printablesiczfirz

Flexible Mask Rolley [ Universal Modular System ] Covid-19

Subscribe Now! Yet another easy printable and usable mask. The shape of this design will cover your chin. Design inspired by an antique TLR. First prototype equip with two extended hooks for strap which looks like the aperture and shuttle…

Pobrania
159
Polubienia
46
Ocena
0
P
Printables3D-Fuchs

COVID mask earsaver

Print it with 3 perimeters short version = 176mm long version = 199mm

Pobrania
155
Polubienia
12
Ocena
5
P
PrintablesKoray

Ski Helmet Clip for Mask (COVID-FFP2-N95)

Made to print without supports, works with couple of helmets I have, the strap width is 16.5 mm. I used PLA with 0.3mm layer height. There is a slight angle to compensate for the strap orientation, that's why there is a left and right…

Pobrania
153
Polubienia
11
Ocena
4
P
PrintablesDefenderBob

covid_19_headband_rc3_15mm_4pcs

Took the stack that was uploaded (THANKS MUCH!) and cleaned the text, split the bodies to 15mm and recombined. This is next on my printer queue, but looking at the layers in Cura, it seems OK. Shout-out to this community for being…

Pobrania
153
Polubienia
0
Ocena
0
P
Printablesiczfirz

Air Purifier [Deckman|Scalar] Covid-19

Yet another easy printable and usable air purifier. Super scalable. Easy print even scale down to Car Cup Holder size and unlimited scale up. I made this for my loves in office area in the day of the Covid-19. Good Luck everyone and my…

Pobrania
151
Polubienia
45
Ocena
4
P
PrintablesEmbrace Making

NEW Covid-19 Face Shield Design (Prints ~4X Faster, No Elastic Required, Printable Straps!)

INSTRUCTIONS AND FEATURES HERE: I'm sharing with you my latest 3D printed Covid-19 face shield design! After many iterations, and combining some of the best features of popular face shield designs, I think this offers great protection,…

Pobrania
145
Polubienia
4
Ocena
0
P
Printablesl.pekarek

COVID suction adapter with dental dam hook

Check out our latest version at www.asana-dental.com Another remix of my previous dental aspiration adapter. This version has a hook for a dental dam (Kofferdam).

Pobrania
143
Polubienia
4
Ocena
0
P
Printablesppaukstelis

Covid RC3-quad, support fix

Fixed the two missing supports.

Pobrania
142
Polubienia
0
Ocena
0
P
Printablesiczfirz

3M Half FacePiece Mask Cartridge and Cap - Covid-19

Yet another Covid-19 mod for anyone with 3M 6000 7500 Half Facepiece Mask handy. (--- DISCLAIMER ---) Print and use it at your own risk. This is a remix from HEPA for Valvy : https://www.thingiverse.com/thing:4196325…

Pobrania
139
Polubienia
45
Ocena
5
P

Face shield Covid-19

~40 minute prints each, this face shield print resolves the gap issue over the shield with Prusa Face Shield RC3 while still conforming to the shape of the wearers head. By raising the position of the elastic band relative to the print…

Pobrania
137
Polubienia
0
Ocena
0
P
PrintablesXilav

Covid Christmas Tree Ornament

Just another Covid Christmas Tree Ornament Covid shape designed by starline / Freepik

Pobrania
137
Polubienia
14
Ocena
0
P
PrintablesJMcK

COVID Test Stand

If you need to test, you know the kits usually come with a hole to punch out or some other ineffective stand to hold the sample tube. This tube stand is a way more convenient approach for preventing spillage of the booger-liquid in the…

Pobrania
135
Polubienia
46
Ocena
5
P
PrintablesSimon G

Remixed covid-19 shield. R3

Remixed shield with closed top and hole for USA standard punch. Also longer arms to eliminate need for elastic. Added clips for N95 face mask tie. reduced height except forehead pad. Printing at 150% gets you to 1 hr 10 min. V12 ADDS…

Pobrania
135
Polubienia
0
Ocena
5
P
Printablesstewartr

Prusa Covid-19 RC3 Face Shield Cutting Stencil

For those that don’t have a laser cutter, this stencil will allow you to mark out the top and bottom holes along with the corner curves. Align it with the top of your clear sheet, draw or (carefully) cut around the corners and mark out…

Pobrania
135
Polubienia
2
Ocena
0

Pokemon inspired, Scovillian, Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Scovillian, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.

Pobrania
135
Polubienia
27
Ocena
0
P
PrintablesEdge Retail

Covid-19 Visor mask - PETG and 3D Print only.

0.5mm PETG strap to be cut alongside manufacturing of the front visor. Clips added to each side of the frame to suit. Due to the extreme contagiousness of Covid-19, we at Edge Retail have attempted to avoid the use of fabric within the…

Pobrania
133
Polubienia
0
Ocena
0
P
PrintablesArtas8125

Shield Covid Easy Print

This is a very easy print, and you can up to 5 shield in one bed (20 20 24). Very easy also to add the film and remove. Be save

Pobrania
132
Polubienia
2
Ocena
5

Covid Trophy

Decorative trophy of a covid virus, prints well in PLA with supports.

Pobrania
131
Polubienia
22
Ocena
0

Elastic Headstrap for Protective face shield / COVID19

I made an elastic remixed idea from https://www.prusaprinters.org/prints/26330 But I design this for FLEX filament printing an d optimized design. I used Ice Filament FLEX which has high shore (== not so flex) This could be sterilize at…

Pobrania
127
Polubienia
1
Ocena
5
P
PrintablesEmbrace Making

Folding Detent Head Strap Integrated - PRUSA Covid-19 / Coronavirus Face Shield

Instructions: NOTE* IF PRUSA DOWNLOAD ISN'T WORKING, GO HERE: https://www.thingiverse.com/thing:4246175 https://grabcad.com/library/prusa-covid-19-coronavirus-face-shield-with-integrated-folding-detent-strap-1 UPDATE 13/04/2020: NEWEST…

Pobrania
126
Polubienia
3
Ocena
0
P
PrintablesJace1969

Covid 19 Mask Darth Vader Cover

With all the doom and gloom regarding the Covi19 I thought this would generate a smile from all the children whom currently see just a plain old face mask, Cheers Jace This clips on to the front grill/ filter cap or glued to be preferred…

Pobrania
124
Polubienia
44
Ocena
0
P

Prusa COVID19 shield with brow cover

Print of https://www.prusaprinters.org/prints/26800-prusa-rc2-face-shield-upper-brow-cover-no-supports

Pobrania
122
Polubienia
1
Ocena
0
P
PrintablesUlitiy

Ventilator connector for various snorkeling masks, C-PAP therapy, protection COVID-19

Decathlon EASYBREAH SUBEA old – files without suffix in the end Decathlon EASYBREAH SUBEA new – files with "rect" suffix Subea Chinese clone – files with "small" suffix Airtight Includes 2 models per mask – for 2 separate channels and…

Pobrania
122
Polubienia
13
Ocena
5
P
Printablesiczfirz

Simply Flexible Mask Valvy Covid-19

Yet another easy printable and usable mask. (Updated 03-26-2020. Add readme.txt and zipper edition) ===================================================== (---- Notice ----) Why will I not design this mask for printing in PLA or PETG?! I…

Pobrania
122
Polubienia
36
Ocena
0
P
PrintablesCCR Collipulli

Gradilla Examen PCR - COVID-19

///Diseño de gradilla para tubos de examen PCR, dedicado a equipos COVID-19 en contexto de búsqueda de casos activos. Realizado por el Área de Tecnologías Inclusivas del Centro Comunitario de Rehabilitación (CCR) Collipulli - Departamento…

Pobrania
121
Polubienia
18
Ocena
5
P
PrintablesKentin

Coronavirus - Covid Keychain

Coronavirus Keychain Approx Diameter : 35mm

Pobrania
117
Polubienia
12
Ocena
5
P
PrintablesPascal

Covid-19 self-test tube holder

This is a further model of a tube holder suitable for Covid-19 self-test tubes It should make life easier for anyone struggling to hold the different components of the self-test kit in his or her hands simultaneously.

Pobrania
116
Polubienia
11
Ocena
5
P
PrintablesVratik

Covid self-test holder for test tube

Holder (boy or girl) for test tube for Covid self-test. Suitable for school children, who use self-test in school. Print "at back" - no supports needed. Infill 10 - 30% PLA Print Settings Printer: Felix Tec 4 Rafts: No Supports: No…

Pobrania
114
Polubienia
3
Ocena
5
P
PrintablesIntelektron

COVID-19 FSLock

This version allows the mounting of the acetate (A4 format) under pressure, without the need to drill holes in it and facilitating the assembly of the mask. Was developed based on (3d printed face mask A4 sheet Autolock), remodeled and…

Pobrania
113
Polubienia
0
Ocena
0

COVID19 HEPA Filter Mask V5

This is the Printable .stl for the COVID19 HEPA Filter Mask V5 (.3 Micron). ATTN: YOU MUST PRINT THE MAIN BODY OF THE MASK IN TPU, AS WELL AS IN VASE MODE (WITH 2MM BRIM) I have also decided to provide the .step (Editable File) located on…

Pobrania
112
Polubienia
11
Ocena
0