Liczymy pasujące modele…
This is a simple Intel CPU holder for people like me who just want to have a processor standing on their desk. You can put the CPU from both sides inside, so that you can either see the heatspreader or the pins connecting to the socket. I…
Wydruk około 3,02 €–3,69 € nettoWstępna wycena jednego wariantu
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Inspired by the Benchmade™ SOCP line of daggers, this pointy-ish defensive tool is not easily knocked out of your hand as you counterattack, gouging the thug's neck and eyeballs and whatnot. See Also Jérémy’s Weaponry Collection
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Wearable SCP badge with magnets that can be applied to lab coat or shirt to customize it without damaging material Pause print at layer 9 and insert three 10x15x3mm magnets. Other three magnets go inside of your cloth of choice. I myself…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
William Shatner face was adapted for Michael Myers' iconic mask. Now you can print yourself one… be either CPT Kirk. or even scarier …Michael Myers This file is by the “Real" Mr. Anderson
Wydruk około 9,04 €–11,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A friend of mine asked me to make him a hook for his 22mm CPAP hose. I was not happy with the existing models, so I quickly made this lightweight design for him. The hose snaps in nicely and sits firm but not too tight. There is one…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
TL;DR first: This is very taxing on your printer! The mesh consists of a lot of intersecting shapes, and so this means a lot of movement and retractions. Be advised that you should make sure that your printer is maintenanced properly.…
Wydruk około 12,55 €–15,34 € nettoWstępna wycena jednego wariantu
The internal plastic spring breaks on the Phillips DreamStation BiPAP which causes the door latch for the water chamber to not stay latched. A few screws allows access to the old spring that can be completely removed and replaced with…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The space at the back between the wall and the router is set to 20mm. This should be enough space for the cables. If you need more space you can adjust the distance via the variable “Mount: Distance” variable in the FreeCAD project file.…
Wydruk około 6,93 €–8,47 € nettoWstępna wycena jednego wariantu
EN: The plug for rain gutters of the Israeli PALRAM Multiline 6x8 greenhouse. Printed from PETG "flat" with supports. Greenhouse has rain gutters along the longer sides with outlet on all 4 corners. I joined 2 corner outlets together with…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A CPAP mount that fits in tight space between a bed and other furniture/wall. Designed model provides a mounting plate on which an AirSense 10 CPAP unit can securely rest while retaining access to the removable side water reservoir. The…
Wydruk około 3,52 €–4,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are the all the parts I use to lighten the printhead of the FFCP, improve cooling and cable management for single extruder use. Needed hardware: 6 x short M3 heatset insert (CNC Kitchen) Optional: 2nd cooling fan + 2 x M3 heatset…
Wydruk około 5,96 €–7,28 € nettoWstępna wycena jednego wariantu
During the summer period, humpback whales do live in the sold polar waters - so it could be assumed, that the water in the cooling system is also cold ;-) I would recommend printing the base in a (dark) blue color, the whale in grey. If…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
After designing the CPAP hook , I was asked to also make a bracket which allows to hold and guide the hose for convenient use. The hose snaps in nicely and sits firm but not too tight and allows for little adjustments in length. Mounted…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I like flying the Blade mCPx V2 indoors or in a calm day in my back yard when I do not want to drive to an RC field to fly the larger RC helis! It is very, very tough and can take crashes without any damage except the landing gear/battery…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
This is a fan shroud to help the CPU fan suck in cold air from the outside, through the side panels. It should just fit through pressure, no mounting hardware or tape needed. I made it for the "Kolink Rocket" mini-ITX pc case with the…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
This stealthburner model includes the mounting of a Phaetus Rapid 2 Plus UHF hotend and a CPAP for cooling, retaining the possibility of also mounting the Canbus if desired
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
Model was designed to visually indicate any bed warping and inconsistencies leading to print issues. This model prints a single layer at 0.2mm and 2 walls at 0.5mm.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
A friend of mine needed new Face Mask Couplings for his Laerdal CPR Doll. So i re-create this piece for Home printing.
Wydruk około 7,36 €–9,00 € nettoWstępna wycena jednego wariantu
My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The better airflow can reduce your CPU temperatures by 10-15°C. Right now it is printed in ASA and CPU reaches 48°C normal browser use. If your case reaches high temps i suggest printing in PETG, ASA or ABS. More details follow after…
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
This bracket allows you to mount the Canon CP1500 photo printer on a standard speaker stand. It is designed to attach the CP1500 holder from Benjamin Kott to a 35mm speaker stand. In combination, the whole thing is then ideal for a photo…
Wydruk około 8,52 €–10,41 € nettoWstępna wycena jednego wariantu
This is a body surround (grease sheild) for a West Coast Products, 2nd generation (before the X drive), swerve module (part number WCP-0169). It is a 2-part surround designed to be snapped onto an already-assembled swerve module, snapping…
Wydruk około 20,24 €–24,74 € nettoWstępna wycena jednego wariantu
Watering hole stuffing for Savic Rody Cavia cage (70 x 45 x 31 cm), it is originally for guinea pigs, but also can be commonly used for hamsters. We have faced the problem with biting the plastic around the watering holes so I designed…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is the casing that the soft insert goes into and only includes the section that connects to the CPAP. There's an insert that snaps into the casing, that connects the hose to the casing, that is not included. I will likely model…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
Thank you for downloading and liking the model! Your support means the model reached the 400 downloads in one month milestone ! 🏆 As a thank you, Version 2.1 adds a prop silencer attachment. New prop of the SCCY CPX-2 9mm handgun. This is…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Update May 2026: Added new version with mounting holes for more options, sorry to those who requested this for taking so long. Simple wall hook for guiding CPAP tube overhead by your pillow. Also has a hook for your mask when not in use.…
They are finally here, CPU cases for your organization needs! Versions Included: 17XX 1851 Holder V12 20XX Holder V5 115X 1200 holder V8 AM4 Holder V11 AM5 Holder V8 Tools required: Hammer Extra Materials: 2 x 2D finishing nail 1" (25mm),…
This is the final version of ED209 in 1/10 scale. Includes all the parts to make this version as screen accurate as possible. Print at .1mm to avoid excess sanding.
Mount your Airsense 11 CPAP machine to the wall to free up night stand space. Water reservoir is easily accessible. Incorporates hooks for holding the tube up. I printed this on my Ender 3 V2 with .28 resolution, 3 walls, 5% infill, using…
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
English version follows. Stavebnice modulární pažby pro vzduchovky Artemis (SPA/SMK) CP-2 a CP-1 (též Diana Chaser, Bandit). Oproti originálu nabízí (subjektivně) lepší ergonomii, nastavitelnou a vyměnitelnou pistolovou rukojeť, lícnici a…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
This is a print for a bracket to mount a hose. This is designed specifically for the ResMed Climate Line Air 11 hose but as most hoses are universally sized I'm sure this will work for most. I included two prints, one has an inner ridge…
Was looking for speed loaders with a better one handed grip and decided to make one for 9mm and 45 ACP Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament:…
v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
Discussion A replacement mainboard cover for the Qidi Plus4 that allows for the use of an 80x25mm fan This is a variant of my other honeycomb design posted on Thingiverse This variant positions the fan more centrally over the hottest…
A mount for the first version of the Picostation, with direct access to the SD Card slot, bootsel button and activity led. The Picostation must use the feet provided, and seat in a slanted way. This allows for the SD Card to be accessible…
This is my design of the T-800 CPU as seen on the Terminator 2 (extended edition) movie, specifically the scene where they decide to re-programme the T-800. If you like this design, please give it a like and follow my Instagram page to…
Update: May 5th 2024 The model has been revised to improve the hinge. This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). Print instructions Rafts: No Supports: No Layer Height: 0.2mm…
This beauty is a 3d printable model of the Tron Ares Master Control Programm Identity Disc or M.C.P. Disc for short. Fully printable with FDM printers and only possible thanks to plentiful_props_3d To power this model you will need a…
The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…
I printed it with a 0.2mm layer height. The cutouts on the corners of the bottom piece are to grab the CPU: Tested with my Ryzen 7 1700. Moddeled with the help of this Ryzen CPU model: https://grabcad.com/library/amd-ryzen-cpu-2
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 .45 ACP Cartridges in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays. This allows one…
I made these two models quite some time ago about a year apart, they were commissions way back then and were a great excuse to practice sculpting, the sad version being one of my first sculpting projects ever. note that while the…
Regenerative compressors provide good pressure head and medium flow at low RPMs. I designed this one from scratch in Sketchup to play with the concept for potential CPAP cooling on my printer. It starts to build pressure head at fairly…
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
This print is to hold a CPAP mask and an additional headband. The shelf is flat on top and curved on the sides to brace the head tubing properly. This is designed specifically for the ResMed AirFit P30i Nasal Pillow mask but will hold any…
Improved taller enclosure for the FlashForge AD5X. These alternate parts and additional parts increase the overall height by 64mm, this gives proper room and clearance for the PTFE feed tubes, There is also a cowl that installs over the…
Here comes a Boeing 737 MCP (Collins), suitable/intended for MMU printing. I used filament in the color RAL-7011 iron gray, to match the original color. The whole thing is controlled via two Arduinos and MobiFlight .…
I loved puhlbo's PCP Airgun Moderator / Suppressor but wanted to be able to print with less material and in less time. This answers that. Seems to work very well on a 6 FT LB air arms S200. I don't have a db tester, but it definitely…
Easy tool for measuring TCP and Base on robots. Positioning with magnets. Thanks to strong magnets and lightweight plastic, there is no displacement when touched. Each attachment has a screwdriver hole in it, in case the thread in the…
I found all the things I wanted in my Stealthburner to work with my ERCF and combined them to complete this. I have remixed all these parts to work with this setup. None of the original printed parts for the Stealthburner can be used. You…
Both are printed with the small face at the top on the buildplate without supports, step files are available.
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
First of all, thanks to "ogland" for sharing. I like this simple design very much, but it is not very suitable for me. I will make several major modifications on this basis. Adapt to Mellow Voron-Kit de extrusora Stealthburner Orbiter,…
SCP:SL 05 Keycard The QR code should work and it will detect you to the scp wiki Filament: PLA (black and white) Supports: No Infill: 100% You will need to add a color change on the on the ninth layer or the layer that the graphics appear.
Same enclosure, I just removed the personal logo inlay from the pieces.
Three of the most basic forms that crystal structures form in materials. Supports are necessary. Models in the image were printed at 50% scale. Print instructions 0.2mm layer height 15% infill Supports Necessary
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
Wall mount for AirSense 11 CPAP machine. Holds CPAP machine very securely, very stable and strong. Mounts to wall using size #6 round head drywall screws. Simply mount to wall and then slide in the CPAP machine from the left side. The…
Mammoth-3D CPAP Muffler: Reducing Noise by 13 dB with 100% Airflow for 3D Printing Part Cooling The Mammoth-3D CPAP Muffler is specifically designed to reduce the noise generated by the cooling fan ( 24V Brushless Centrifugal Air Blower…
This project wouldn’t have been possible without the support of the CN3D community and partners like Polymaker & BIQU — thank you all! The CN3D Y-CPAP Toolhead is a compact, high-performance solution designed for serious airflow and…
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
.380 ACP, also known as .380 Automatic Colt Pistol, .380 Auto, 9x17mm, 9mm Browning, 9mm Browning Court, or 9mm Short, is a centerfire handgun cartridge designed in the United States of America by John Browning in 1908. Print this for…
New box for holding magnets. - 2x washer up to 24mm diameter, inner diameter over 8mm, 2mm height - Insert into box during printing https://www.printables.com/model/1469521-roboter-tool-measuring-tcpbase
Structure et crosse pour un pistolet Artemis CP2 / Diana chaser
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
The FAN RETURN can be used with or without the following HEPA filter cartridge. https://a.co/d/hSXwPuz The HEPA filters main purpose is for noise attenuation. Use the “FILTER_BLANK” if not using the filter or use…
This is a simple print-in-place protective case for Intel 12th-14th Gen CPUs (LGA 1700). Print instructions Rafts: No Supports: No Layer Height: 0.2mm or 0.3mm Infill: 15-20% 3 perimeters 3 tops 3 bottoms Filament: Anything should be fine!
This is airflow optimized SSD mount in the 3,5" Supermicro drive sleads. This is based the OEM MCP-220-00043-0N mount and works with 7mm thick SSD and 15mm (use the SAS version), let me know i you need a diffrent size. This is made to…
In order to use the Klipper firm through the Sonic Pad on the Creality Ender-3 V3 SE printer and the vibration sensor for vibration compensation, you need parts to connect the sensor. This data is a guide case file for connecting a…
This is a stock for an Artemis CP2 airgun. Use M5 screws, and 3d printer threaded rods T8 / 2 for the big ones. T8/2 are 5 cm , except the bottom one 10 cm For the wheels, there's 2 types (you choose) : you can print the threads, or…
This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). I've remixed the original model so that you can see the CPU model, with a small window at the top.
I printed it with 0.6mm nozzle and 0.3mm layer heights in PLA and it worked fine, it doesn't damage any of the pins and keeps them covered. I made this quickly so it's not perfect, but it does the job
.45 ACP, also known as .45 Automatic Colt Pistol or .45 Auto, is a centerfire handgun cartridge designed in the United States of America by John Browning in 1904. Print this for props, display, education, training, just because it's cool,…
SCP 049. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Dallas Korbin Vector CP1 Hand Gun. Korben Dallas, the protagonist of the movie “The Fifth Element”, uses a Vektor CP1 pistol throughout the film.. The Vektor CP1 is a semi-automatic pistol that was designed and produced in South Africa1.…
This is replacement cover for Parallel I/O (or parallel port) of Sony PlayStation 1. I tried this on model SCPH-550X, but most likely it will be compatible with any model with parallel port (from SCPH-100X to SCPH-750X). Latch is fully…
The .45 ACP (Automatic Colt Pistol, also known as .45 Auto) was designed by John Moses Browning in 1904. It was adopted as the standard chambering for Colt's M1911 pistol. Category: Sport & Outdoors
This model is inspired by the Cambridge Audio Minx Mini12 Speaker box designs for a twin centre and single left and rights to utilise the Dayton Audio CE65W-8 Sub box designed for the Dayton TCP115-4 in a sealed configuration. The grills…
The purpose of this item is to accommodate CPUs while offering a reliable enclosure for CPUs. You will maybe need to tweak some dimensions for your CPUs
This is a mashup to have a toolboard with an CPAP hose, a PG9 glad thread for a CAN cable and a thread for a pneumatic fitting to hold a PTFE tube. Additional, I made the CPAP muffler from the VZbot fit, to silence the CPAP fan a little…
In 1986 the "Nederlandse Spoorwegen" (Dutch State Railways) started the refurbishment/reconstruction of "ballastwagons". Details: https://nl.wikipedia.org/wiki/Fccpps and http://spoorhistorie.com/goederenwagens-fccpps.html At first this…
I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…
This print is for a cradle to hold the end of the CPAP hose when not in use. This was designed for the ResMed Climate Line Air 11 hose but should be usable for most CPSP hoses as they are very similar in size. I used a #6 x ¾ screw to…
This is an exact scale replica I made in Fusion 360 of the "horizontal (red)" part of the “XCP-DS Fit® universal sensor holder system” found here:…
Not wearable . Sculptural rendition of SCP-049’s plague doctor face as a mask. Detailed scratches and texture to mimic the chitinous material of the SCP’s face. Best for high resolution printers.
I print this with PET-G at a 0.3mm layer height, works great.
SCP 096. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Had a hard time finding an adapter or manifold to use 5015 fans in conjunction with 19mm CPAP tubing for a remote part cooling setup. The few I found wouldn't work with how I have my gantry set up, so I went ahead and modeled this one. So…
This is an insert for an Altoids container to hold a standard Ruger LCP 380 magazine and 5 spare rounds of 380 auto ammunition.
Ever needed to safely keep your old AMD CPU? This is a simple, print in place case just for you! I would recommend adding a bit of tape to help keep it shut. Files include STL, STEP, and Autodesk Inventor Part file for editing and…
I have combined three ideas together: air duct goes to the back ( https://www.thingiverse.com/thing:3991193 ) reduce the noise with shock of the air waves in the inner fins (rungs) round holes ( https://www.thingiverse.com/thing:4251317 )…
