Liczymy pasujące modele…
TL;DR first: This is very taxing on your printer! The mesh consists of a lot of intersecting shapes, and so this means a lot of movement and retractions. Be advised that you should make sure that your printer is maintenanced properly.…
Since I like my Pica pencil with the holder, I wanted the same concept for my NicPro Mechanical Carpenter Pencils. There are two versions. Clip Sheath - This design has a sheath for the pencil clip to slide into. It is sightly longer than…
A TECPRO style racing circuit barrier, perhaps for your OpenRC F1 racing needs. It is designed to be printed just as a thin shell. You can then use a paperclip on the recessed underside to connect a few of them together. Because it is…
I always wanted to use an ATX Windows PC inside a MacPro housing with retaining the original looks as much as possible. I looked at the laserhive(https://thelaserhive.com/product-category/mac-pro-kits/) conversion kits, but did not like…
Mid/Late 2000s Mac Pro cases are beautiful! However, it's hard to keep up with evolving technology with the quickly depreciating IO and internal components. A great way to preserve the old Mac style and gain more power is case conversions…
I needed a different nozzle to get underneath rocks and into nooks. Print in PETG
A friend of mine needed new Face Mask Couplings for his Laerdal CPR Doll. So i re-create this piece for Home printing.
Print with normal Support (not tree). Infill: 15% Material: PLA, ABS, PETG Nozzle: 0.4mm
Heyho I already showed in the last video what can happen if you "forget" a candle in a 3D printed holder. I also presented a constructive solution on how to theoretically prevent this burning. However, as I found the project exciting…
change psu size from flex to cprs 185mm*73.5mm*40mm make a hole on front panle for 16mm power botton
This set up allows you to mount a vangree 9 port USB hub in the top drive bay of a mac pro, pics below, some more instructions here… https://www.reddit.com/r/macpro/comments/184gps2/4151_built_in_usb_hub/
CPR MOLLE Mount for the pocket sized (2" x 2") CPR barrier shields / masks. This is designed to fit, the small mask / barriers that are folded up in small nylon woven pouches and often given away at CPR trainings, or sold in bulk. This…
Olight ArcPro style flashlight charging station. This can be mounted on a wall, screwed to the Grid10 Base plate or there are holes on the back for two 18x3mm magnets. This is a great accessory of you want a secure mount for your Olight.
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs Introducing a 3D printable plastic part that allows you to turn any plastic film—like pouches, document pockets,…
This is a RCPROPLUS SupraX 7808 (7 mm bullet, S7) Connector Protection Cap. It's designed to be printed out of TPU, and should not need supports to print, as the overhangs are all > 40 degrees.
A riser, and a cable organizer for the Apple Macpro 6,1 helps with ventilation Please LIKE if you download.
My Apple MacBook Pro is great and is more powerful than my desktop. So I now have it hooked up to a docking station and use it with all my monitors. But I wanted to stand the MacBook on its side to save some desk space. I went to Apple's…
This is a version of the original MacPro G5 rear fan bracket modified to fit with The Laser Hive's “mATX Original" case conversion kit. Link to the G5 case conversion kit: https://thelaserhive.com/product/matx-original-kit/ Just in case…
Este proyecto fue realizado por el laboratorio educativo de Educar S.E. Se trata de una mini impresora 3d DIY. Realizada en base reprap, este proyecto requirió la modificación del firmware marlin 2.1.2.5. Cuenta con la particularidad de…
The injection mold was created as part of a recycling project. The aim was to recycle 3D printing waste, misprints, and old or no longer needed prototypes. To do this, the material was sorted by type and shredded in a homemade shredder.…
Normal print PLA infill 10-15%
This is a combination GPU support bracket and GPU Power Cable management channel for the McPrue Apollo S 4.0 PC Case. I made it specifically for my build so it might need adjustment based on your components and wiring choices. Features…
This is a RCPROPLUS SupraX 6808 (6 mm bullet, S6 or D6) Connector Protection Cap. It's designed to be printed out of TPU, and should not need supports to print, as the overhangs are all > 40 degrees.
As someone who regularly works with Laerdal Little Anne QCPR mannequins, I was looking for a practical way to “hook/hang” them — either on a wall, chair, or anywhere else that makes storage or demonstration easier. After experimenting…
A minor remix of Tache's NicPro Carpenter Pencil Holder Sheath. All that was done was to extend the tip length by 7mm. I like to keep sharpened pencils ready to go. Tache's version, with the pencil I have, didn't have any extra room at…
Strain Relief for Amphenol ACPR-BLK Plug This is a strain relief sleeve for use in Amphenol RCA plugs. It enables use of thin cables, such as coax cable (ie. RG-179) Print from PC or industrial PLA using 0.15mm layer height.
I could not find a printable STL file to protect my PSOC6 Wi-Fi BT PROTOTYPING KIT (CY8CPROTO-062-4343W) board I use for school. I did in fact found this website were someone makes the case I provide here, but this person didn't provide…
This is a model to replace the grey plastic part of the rear exhaust fan assembly on a MacPro G5. I made this to fit the fan grill bracket more loosely, but would still recommend printing this standing up right to make sure the layer…
Use this gadget to get every bit of sharpie goodness out of your sharpies! Run a string through the holes crossing over the front and give it a whirl or two. Works with string up to 3mm diameter.
Resized from a D6 upload, fits firmly (printed in resin, unsure about PLA).
Everyone who took first aid courses must have trained to do CPR. And if you did a CPR, you definitely did it on one of the CPR dummies available on the market. One of the most popular CPR mannequins -Laerdal Little Anne CPR manikin. It…
battery cup for RcProPlus supraX connectors, REB6808,
Housing for a valved-bypass manifold for optional external water cooling component connections, for the McPrue Apollo S V4.0 computer case. Parts to print Printed in Polylite ASA but PLA/PETG should be fine too. Main Body Mobo-side…
Replacement/printable strain relief for Amphenol RCA cable connectors (M-Series/RCPA) Print with flexible filament. Depending on how flexible the filament is, might require some slight modification/cuts on the sleeve to make it fit.…
Holder for a CPR-mask, scale to case size before printing it. Planning on making it a belt attachment too once I'm a first aid worker. Planning on making other remixes for it as well, so stay tuned for it :) I placed a little bit of hoop…
3x4 gridfinity for the NicPro 11 Pack Carpenter Pencil Set. Carbide Scribe/Center punch not included in model, I will be including those in a bin dedicated to marking.
I needed a mockup of the new MacPro so I took all the info and design I could find and here it is. Please note that the actual MacPro would make a better ashtray since it is made from actual aluminum. Category: Computer
In case you're modifying your MacPro G5 case with The Laser Hive's Original mATX Kit, there will be a small gap between the IO mount and the back panel. This model will help you cover the gap with a shroud to avoid too much dust ingress.…
Adapter plate allowing the PSU bracket in the McPrue Apollo S 4.0 case to be rotated 90°. I used this to help a little with cable space for an SFX-L power supply, and to let the PSU exhaust be drawn through the case's front panel. I used…
Storage for the 18-piece NicPro carpenter and construction mechanical pencil set ( https://www.amazon.com/dp/B0CKYM84J4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 ). One tray holds three carpenter pencils (2.8mm leads) and three…
This is like the other octahedral test except the octahedra are not joined face to face but point to point. Category: 3D Printing Tests
CPR Car Care Logo (stand up desk logo) Printed with color painting (works well with AMS)
Base on MacPro 2009 full PC conversion I'm currently doing, see Reddit. This is my revision based on the hole I cut out of the front panel on the MacPro 2009/11 chassis and fitting in my own design. Which houses the original power button…
This is designed for destructive testing to judge the strength of the structure. Category: 3D Printing Tests
This is an open framework formed from tetrahedra. It is intended for destructive testing to show the strength and failure modes for this design. Category: Art
Für die Montage werden 2 Schrauben M3x4, sowie zwei M3-Muttern benötigt.
This was created for the Hydraulic Press Channel episode "Which is The Strongest Shape? Hydraulic Press Test!" Unfortunately, they were inundated with models and closed the competition. This is a tetrahedron that is 100mm in height. It…
This is another test print intended for destructive testing. Category: 3D Printing Tests
This is similar to Eero Saarinen's Arch monument in St. Louis. Category: 3D Printing Tests
Another new cleaner for the garlic press. Since there wasn't a model that fit my garlic press, I designed a custom part for this model. de: Noch ein neuer Reiniger für die Knoblauchpresse. Da es kein passendes Modell für meine…
I replaced the gravity fill inlet in my van with a new city water inlet, and needed a faceplate to cover the old larger hole. This model is based on the RecPro RV City Water Fill Inlet (Amazon; not an affiliate link) The hole is…
A holder for three NicPro pencils compatible with one-inch grid pegboard. The edition shown was printed on a CoreOne+ in Overture white PLA at 0.28 resolution. I printed upside-down with supports for pegboard hooks and posts.
A plug to protect the bayonet fitting of the Corpuls CPR from dust and debris. It's a tight fitment so some trial and error might be necessary. I printed at 100% from ABS and it fit really snug on one CPR and a little more lose on another.
I wanted to make airbrush paint holders for the 20 piece nicpro 0.68 oz bottles. Simple design, the holders are my orginal creation, I tweaked the legs that chikavili created originally found at cults3d. Just print both files and glue the…
When doing multi-colour prints with a single extruder I suggest this guide: https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4s-how-do-i-print-this/how-to-print-multi-material-models-without-an-mmu-tutorial/
A nice tool to have when soldering - or probing - printed circuit boards! Required hardware a neodymium magnet of 3mm x 12mm diameter M4x35mm bold M4 nut (with nylon) Spring of internal diameter > 4mm and outer diameter ≤ 7mm with length…
I needed a wall mount for the toothbrush base charger. Added counter sunk screw holes and a cable guide
A holder for four NicPro Pens compatible with one-inch grid pegboard. The edition shown was printed on a CoreOne+ in Overture white PLA at 0.28 resolution. I printed upside-down with supports for pegboard hooks and posts. The interior…
Adapter plate allowing the PSU bracket in the McPrue Apollo S 4.0 case to be rotated 90°. I used this to help a little with cable space for an SFX-L power supply, and to let the PSU exhaust be drawn through the case's front panel. I used…
change psu size from flex to cprs 185mm*73.5mm*40mm make a hole on front panle for 16mm power botton
The injection mold was created as part of a recycling project. The aim was to recycle 3D printing waste, misprints, and old or no longer needed prototypes. To do this, the material was sorted by type and shredded in a homemade shredder.…
3x4 gridfinity for the NicPro 11 Pack Carpenter Pencil Set. Carbide Scribe/Center punch not included in model, I will be including those in a bin dedicated to marking.
Since I like my Pica pencil with the holder, I wanted the same concept for my NicPro Mechanical Carpenter Pencils. There are two versions. Clip Sheath - This design has a sheath for the pencil clip to slide into. It is sightly longer than…
This is another model for the Hydraulic Press Channel on YouTube. These are tested in a press with a load cell to determine the strength of the print. Category: 3D Printing Tests
