Liczymy pasujące modele…
There are plenty of effective funnels out there. A problem that I have is that funnels sometimes move or fall. The spills can be frustrating to clean, and so I made a cap with funnel attachment to keep it more secure. The outlet mouth is…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Filament Dry Box with manual rewind function using DAISO 5.5L Airtight Container. ダイソー5.5L密封容器を使ったフィラメントドライボックスです。 手動でスプールを回転させることができます。 Bill of Materials DAISO 5.5L Airtight Container – x1 M3 x 8mm Socket Head Screws – x14 M3 Nuts – x14…
PTFE Guide for Dry Box. This model can be used for DAISO filament dry box linked below. ダイソー5.5L密封容器を使ったフィラメントドライボックス用のPTFEガイドです。 下記リンクのドライボックスで利用できます。 DAISO 5.5L Filament Dry Box with Manual Rewind Bill of Materials M3 x 8mm Socket Head…
A positive retention holster for Daiso/unbranded water guns. Comes in left and right handed versions. Retention can be adjusted by filing down or building up (with superglue or equivalent) a tiny nub inside near where the front sight post…
Silica container which fit with DAISO kimchi box work with 16L and 12L both 20251227 Fixed Funnel diameter
Spool Holder Shaft with 608ZZ Bearings on both ends for DAISO 5.5L Filament Dry Box. This shaft can be used for DAISO filament dry box linked below. ダイソー5.5L密封容器を使ったフィラメントドライボックス用のベアリング付きシャフトです。 ベアリングは両サイドにネジで固定します。 下記リンクのドライボックスで使用できます。…
Voron 3D data's DIN rail mount feature was great, so I adapted it for use with DAISO wire netting.
Spool Holder Shaft with 608ZZ bearing for DAISO 5.5L Filament Dry Box. The bearing is only on the bottom side. This shaft can be used for DAISO filament dry box linked below. ダイソー5.5L密封容器を使ったフィラメントドライボックス用のベアリング付きシャフトです。 ベアリングは底面側のみになります。…
Update 3/2/2023. Added "cylinder 2" to reduce the amount of support when printing. 印刷時のサポートの量を減らすために「cylinder 2」を追加しました。 --------------------------------------------------------------------------------------------------------------- Parts…
What's this? Raspberry Pi Camera case which is able to mount the smartphone lens sold by DAISO, and the NeoPixel(WS2812B). And also this has 2 hinges for changing angular. But, yes. I know. A NeoPixel in this model is not work enough to…
Daiso Japan sells plastic pegboard panels (パンチングボード) and accessories which I had quite a few of. As far as I can tell they discontinued it and I still had some laying around which I wanted to use but didn't have the mount/anchors to hang…
This is a tool holder that attaches to the DAISO wire net.It is used by fixing it with a hook (Daiso) for the wire net. There is also a Step file, so feel free to use it. ダイソーのワイヤーネットに取りつけるツールホルダです。 ワイヤーネット用のフック（ダイソー）で固定して使用します。…
This is a replacement part for the "cylinder". I made it in the hope that it would make it a little easier to rotate, but the spool was still rotating when the original part was used, so I could not confirm the effect of this part. The…
STEPのファイルも同梱しておりますので、寸法が合わない、インサートナットではなくナットを使いたい等の場合はカスタマイズしてお使いください。 圧入箇所がありますので、プリントの精度が比較的必要かもしれません。 レイヤー0.2mm、外周4以上、インフィル30%以上の設定がおすすめです。 サポートは必要ありません。 スプールホルダー本体の組み立てには 608 ベアリング 2個 M4ネジ 10mm 6本 M4 ヒートインサートナット 6個 が必要です。…
Motivation for Creation 作成した動機 FLSUN's V400 3D printer draws nearly one meter of filament when in use due to its construction. FLSUN社のV400という3Dプリンターは、その構造上使用時に１メートル近い長さのフィラメントを引き出します。 This makes it difficult to put the filament back into…
When decorating a DAISO Christmas tree with DAISO decorative lights, there is no way to secure the battery box. For this reason, we created a case to fix the battery box to the leg of the Christmas tree. The size of the Christmas tree…
I had difficulty finding the 8mm long M3 screws so I optimized this model for 6mm M3 cup head screws from the local hardware store. While I was at it, I removed the need for extra printed parts and the M5 screws. The 608 ZZ bearings are…
Mount a 3-pin IEC320 C14 Inlet and fused switch module under a DAISO Joint rack wire-meshed shelf! ダイソーのジョイントラックの転び止め棚の下に3ビンIEC320規格C14インレットユニットを固定するための箱 Requirements: * 1 powermounter.stl * 2 daiso.stl * 1 power connector with fused…
[7th Sept 2023 update] fixed some bugs in the parametric equations, and added 2x, 3x, 4x, 5x options ====================================================================== Gridfinity Storage box is cool, but it is highly limited by one's…
Winners Wall Socket Extender what sells in Korea DAISO. Same as original Wall Socket Extender. 한국 다이소에서 판매되는 위너스 브랜드의 벽 콘센트의 길이 연장용 콘센트 보조대 입니다. 정품과 같은 수치로 렌더링 되어 있습니다.
Designed around the Daiso 5.5L food storage box and the 608zz bearings. This uses 1" pan head #8 screws (11mm head, 4mm diameter at the threads) to hold the bearings in place and provide additional support. It is held to the sides with…
PTFE Tube Holder for Dry Box. This holder can be used for DAISO filament dry box linked below. ドライボックスに取り付けたPTFEチューブを固定するホルダーです。 下記リンクのドライボックスに取り付けできます。 DAISO 5.5L Filament Dry Box with Manual Rewind Bill of Materials M3 x 8mm (or 6mm)…
PTFE Guide Cover for Dry Box. If you want to change the position of the PTFE guide, use this model to cover the unused holes. ダイソー5.5L密封容器を使ったフィラメントドライボックス用のPTFEガイドカバーです。 PTFEガイドの位置を変更したい場合は、このモデルを利用して不要な穴をカバーして下さい。 DAISO 5.5L Filament…
Adjust height of your DAISO joint racks. etc. Use a rubber mallet to insert an M6 bolt into M6foot.stl. Use a 5 mm hex wrench to rescue a broken bottomjoint.stl. FreeCAD source of M6foot.FCStd and bottomjoint.FCStd are available.
I needed a storage solution that wasn't going to take a week to print, so I got a basket at Daiso for $1.75 which had the perfect size to store ink vials. The insert holds 15 vials, and the basket holds 4 inserts for a total of 60 ink…
This Model is offered as inspiration because I am unsure of the availability of the LED light for most folks. I have since combined this model with others from the community to create an LED light for my Prusa Mini+. PLEASE NOTE: QC for…
I always clean the Roborock S5+filter after vacuuming. The filter only can be knocked, so I decided to make a vacuum cleaner adaptor. This one also fits in a 34.5 mm housing (Daison and others). If you need a different diameter please…
It is a wall hook using Daiso's 13mm magnet. Please use it as a writing brush.
Cut down one side of coupling part with a saw. Fix the gear box to this stay with two small tapping screws. I use it to make a sewing thread winder, for example: https://gist.github.com/t-nissie/fbd639bcd427e46c7fdfc1529023d521…
This only includes the shaft, all the other parts can be found in the original post from @aronoiro.
This holds the 15.5cm x 10cm x 3cm DAISO tissues, usually sold in a 2-pack or 3-pack. The holder can be used horizontally or vertically. The versatile double curved design allows the bottom compartment to be used as storage or it can be…
To all the people who bought the Daiso hiragana stamp, and were disappointed that it came with 5 stamps. Link to Video: I 3D modelled these to fit with the Hiragana stamp sheet from Daiso. Files you will find Original Design- Original…
This model should use with shed plate for DAISO container introduced below link. Drybox with a filament delivery function made using an 5.5L airtight container https://www.thingiverse.com/thing:4563022 Notice: Remove the support…
if it's matching up with your bricks but not snapping adjust your flow settings I think I dropped down to 75% more or less this will very with your machine and filament. it's not quite flesh as I'd like it to be but I feel like I got…
DAISO Stainless tray (20.5*14cm) becomes a desiccant cont. You can heat the desiccant without removing it from the tray. Please print with the following settings: Nozzle 0.4mm Height 0.2mm PETG You will need: Heat insert nut :M3*d5*4mm…
A very specific pen holder for a set of Daiso dry erase markers made in a Voronoi style. Kinda turned out weird, but I'll keep it around. I also have the reference file before it got Voronoied if you are interested. If you've got stringy…
Connector for the daiso petit train tracks
Hole&Hole 25x25 cm (1014736) https://www.daisomall.co.kr/pd/pdr/SCR_PDR_0001?pdNo=1014736 Hole&Hole 12.5x25 cm (1014737) https://www.daisomall.co.kr/pd/pdr/SCR_PDR_0001?pdNo=1014737 Link connectors for Daiso Pegboards x2: For connecting…
다이소 skadis 스타일 타공판(품번 1079005) 홀더입니다. 파티션에 거는 형태로 디자인 되었고 거는 부분 폭은 50mm입니다. 30, 45, 60, 80t 파티션에 치수 조정한 버전 추가 하였습니다. (260902)
I made these to organize my minidiscs, much like a file folder, using my trays from Daiso. These work great with Avery 8160 labels: affiliate link . I also use Pilot Friction pens on the labels too: affiliate link .
You can add a wooden top board on your DAISO joint rack with this attachment. Adjust radii of the pole hole and the 5 mm hex wrench hole for your 3D printer.…
Description This is a reinforced replacement part for the flap-style locks on the "A4 Attache Case" sold at Japanese 100-yen shops like Daiso. (Support-free model) The original design has two main issues that this model solves: Fragility:…
A cap that I made for my personal use and sharing in case anyone could need it!
adapted the base to hold nailclippers commonly found in Daiso. works for
It can also be used with other sprays, provided the diameter is under 40mm. By the way, this sanitizing spray is perfect for cleaning the build plate; it contains a small amount of alcohol, so it leaves the surface very clean.
Hole&Hole 25x25 cm (1014736) https://www.daisomall.co.kr/pd/pdr/SCR_PDR_0001?pdNo=1014736 Hole&Hole 12.5x25 cm (1014737) https://www.daisomall.co.kr/pd/pdr/SCR_PDR_0001?pdNo=1014737 Link connectors for Daiso Pegboards x2: For connecting…
![[Parametric, change it to fit your own] inner organizer tray for DAISO](https://media.printables.com/media/prints/571815/images/4573652_a0ddecf8-7258-4604-b29f-9351c471be21/pxl_20230903_132238116.jpg)
