Wyniki wyszukiwania: dichtung

Sortowanie

124 modeli

P
Printablespr3mium.cola

Aperolino MK2 // Ventilblock "Aperol" mit Leckage-Ablauf & Doppeldichtung

Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…

Pobrania
3365
Polubienia
95
Ocena
5
P
Printablespr3mium.cola

Aperolino MK2 // Ventilblock Prosecco für "sehr viele Marken" mit Doppeldichtung & Abfluss

Update 29.02.24: Grüße geht raus an alle heutigen Geburtstagskinder =)! Danke an @Hanno_1419514 für den Denkanstoß zu der guten Verbesserung die Ventilblöcke einfach unten offen und komplett ohne Infill zu drucken! → (Prusa Slicer) Die…

Pobrania
3277
Polubienia
94
Ocena
4,83
P
Printablespr3mium.cola

Aperolino MK2 // Ventilblock "Wasser Glasflasche" mit Leckage-Ablauf & Doppeldichtung

Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…

Pobrania
3226
Polubienia
62
Ocena
4,71
P
PrintablesDanSylveste

Gardena Plug with sealing ring / Gardena Stopfen mit Dichtungsring

I needed a plug for the Gardena Premium System, as there's no direct coupling with waterstop. So I made one 3/4" and one for the standard 1/2" system. Included is a sealing ring. Print the plug in whatever you want, the sealing ring in…

Pobrania
441
Polubienia
46
Ocena
5
P
PrintablesStreifenkarl

Aperolino Ventilblock PET Wasserflasche mit Gewinde und stirnseitiger Dichtung

Ventilblock von Luisengineering abgewandelt mit einem Schraubverschluss um die leere Flasche mitsamt den Ventilblock aus dem Halter ziehen zu können. Als Dichtung kann de r Dichtring 20x3,1 vom Set benutzt werden, dieser dichtet einfach…

Pobrania
413
Polubienia
14
Ocena
0
P
PrintablesOBA

M20x1.5 Blind Stuffing + Nut and TPU-Sealing / M20x1.5 Blindstopfen + Mutter und TPU-Dichtung

M20x1.5 threaded blind stuffing to close unused M20-openings. Unused PG11-openings or PG13.5-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details…

Pobrania
286
Polubienia
19
Ocena
0
P
PrintablesOBA

M25x1.5 Blind Stuffing + Nut and TPU-Sealing / M25x1.5 Blindstopfen + Mutter und TPU-Dichtung

M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…

Pobrania
261
Polubienia
15
Ocena
5
P
PrintablesOBA

M16x1.5 Blind Stuffing + Nut and TPU-Sealing / M16x1.5 Blindstopfen + Mutter und TPU-Dichtung

M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…

Pobrania
238
Polubienia
20
Ocena
5
P
PrintablesHami

PET Flaschenverschluss mit Ring und Dichtung

Einfacher PET Flaschen Verschluss mit Karabinerring und Dichtung Für Handelsübliche 1,5 Liter und 0,5 Liter Flaschen Der Verschluss ist aus PETG , und die Dichtung wird aus TPU gedruckt Simple PET bottle cap with carabiner ring and seal…

Pobrania
208
Polubienia
13
Ocena
0
P
PrintablesOBA

PG21 Blind Stuffing + Nut and TPU-Sealing / PG21 Blindstopfen + Mutter und TPU-Dichtung

PG21 threaded blind stuffing to close unused PG21-openings in housings. [1] Thread type: PG thread [2] Diameters for PG21 opening: a) threaded hole: 26.8mm / PG thread b) drill hole without thread: 28.3mm [3] Sealing: An optional…

Pobrania
195
Polubienia
43
Ocena
0
P
PrintablesJoas

TPU Ring/Dichtung

TPU Ring/Dichtung

Pobrania
175
Polubienia
9
Ocena
0
P
Printablesguennersen

Shower Seal 6 mm / Duschdichtung 6 mm

🇬🇧 EN Seal for 6 mm glass shower door with drip rail and long lip at the bottom. 5 cm width, can be set to the appropriate size in slicer by adjusting the z-axis. 🇩🇪 DE Dichtung für 6 mm starke Glasduschtür mit Abtropfleiste und langer…

Pobrania
168
Polubienia
8
Ocena
5
P
PrintablesOBA

M32x1.5 Blind Stuffing + Nut and TPU-Sealing / M32x1.5 Blindstopfen + Mutter und TPU-Dichtung

M32x1.5 threaded blind stuffing to close unused M32-openings. Unused PG29-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…

Pobrania
164
Polubienia
6
Ocena
0
P
PrintablesOBA

PG11 Blind Stuffing + Nut and TPU-Sealing / PG11 Blindstopfen + Mutter und TPU-Dichtung

PG11 threaded blind stuffing to close unused PG11-openings in housings. [1] Thread type: PG thread [2] Diameters for PG11 opening: a) threaded hole: 17.3mm / PG thread b) drill hole without thread: 18.6mm [3] Sealing: An optional…

Pobrania
162
Polubienia
13
Ocena
5
P
PrintablesDimitri Fendel

Sperrschieber HT 50mm mit Dichtung

Sperrschieber HT 50mm mit O-Ring Dichtung Category: Household

Pobrania
157
Polubienia
17
Ocena
5
P
PrintablesSimon

Sterndichtung bestway flowclear 2006l/h

Als Ersatz für eine kaputte Sterndichtung bei einer Bestway Flowclear 2006l/h. Eventuell auch bei anderen passend. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 90 Filament: any TPU…

Pobrania
149
Polubienia
21
Ocena
5
P
PrintablesOBA

PG9 Blind Stuffing + Nut and TPU-Sealing / PG9 Blindstopfen + Mutter und TPU-Dichtung

PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…

Pobrania
146
Polubienia
11
Ocena
0
P
PrintablesOBA

M12x1.5 Blind Stuffing + Nut and TPU-Sealing / M12x1.5 Blindstopfen + Mutter und TPU-Dichtung

M12x1.5 threaded blind stuffing to close unused M12-openings or PG7-openings in housings. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for M12x1.5 opening: a) threaded hole: 10.5mm / M12x1.5 thread b) drill…

Pobrania
145
Polubienia
12
Ocena
5
P
PrintablesOBA

PG13.5 Blind Stuffing + Nut and TPU-Sealing / PG13.5 Blindstopfen + Mutter und TPU-Dichtung

PG13.5 threaded blind stuffing to close unused PG13.5-openings in housings. [1] Thread type: PG thread [2] Diameters for PG13.5 opening: a) threaded hole: 19.1mm / PG thread b) drill hole without thread: 20.4mm [3] Sealing: An optional…

Pobrania
136
Polubienia
12
Ocena
0
P
PrintablesMax Im

Reolink Trackmix ( RLC 830A ) Deckenmontage + ersatz Gummidichtung

zur flachen Montage an der Decke, ersetzt die originale Halterung. es werden weiterhin die Originalen Dichtungen und Schrauben benutzt, außerdem bleibt der Stecker im Original zustand.

Pobrania
134
Polubienia
12
Ocena
0
P
PrintablesOBA

PG7 Blind Stuffing + Nut and TPU-Sealing / PG7 Blindstopfen + Mutter und TPU-Dichtung

PG7 threaded blind stuffing to close unused PG7-openings in housings. [1] Thread type: PG thread [2] Diameters for PG7 opening: a) threaded hole: 11.3mm / PG thread b) drill hole without thread: 12.5mm [3] Sealing: An optional TPU-sealing…

Pobrania
122
Polubienia
10
Ocena
0

Blastgate DN50 mit Dichtung für Kugel

Die Kugel dichtet in der Schale 1 mit einem O-Ring ab. Bei anderen Blast Gates in diesem Design hatte ich das Problem dass Sie nie ganz abgedichtet haben und immer ein wenig Falschluft gezogen wurde. Passender O-Ring:…

Pobrania
114
Polubienia
20
Ocena
4
P
PrintablesOBA

PG16 Blind Stuffing + Nut and TPU-Sealing / PG16 Blindstopfen + Mutter und TPU-Dichtung

PG16 threaded blind stuffing to close unused PG16-openings in housings. [1] Thread type: PG thread [2] Diameters for PG16 opening: a) threaded hole: 21.2mm / PG thread b) drill hole without thread: 22.5mm [3] Sealing: An optional…

Pobrania
112
Polubienia
4
Ocena
0
P
PrintablesOBA

PG29 Blind Stuffing + Nut and TPU-Sealing / PG29 Blindstopfen + Mutter und TPU-Dichtung

PG29 threaded blind stuffing to close unused PG29-openings in housings. [1] Thread type: PG thread [2] Diameters for PG29 opening: a) threaded hole: 35.5mm / PG thread b) drill hole without thread: 37.0mm [3] Sealing: An optional…

Pobrania
111
Polubienia
20
Ocena
5
P
PrintablesLobbyLobster

Simson Kupplungsdeckel Dichtung 38019

Gedruckt aus TPU 98A von 3DJacke. Auf die beiden Dichtlippen achten, diese zeigen bei der Montage nach außen.

Pobrania
111
Polubienia
9
Ocena
0
P
PrintablesOBA

M40x1.5 Blind Stuffing + Nut and TPU-Sealing / M40x1.5 Blindstopfen + Mutter und TPU-Dichtung

M40x1.5 threaded blind stuffing to close unused M40-openings. Unused PG36-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…

Pobrania
102
Polubienia
7
Ocena
0
P

Dichtung f Dusche

Dichtung f Dusche

Pobrania
100
Polubienia
0
Ocena
0
P
PrintablesHaedsector

Dichtung Haubold Klammerer PN 29130 D PN 29150 D RN 100 D

Dichtung Haubold Klammerer PN 29130 D PN 29150 D RN 100 D mit TPU gedruckt. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2 Infill: 100% Category: 3D Printing

Pobrania
96
Polubienia
1
Ocena
0
P
Printableskoenitec

Zargendichtung Schneidhilfe

Print Information: Printer: Prusa-Mini Filament: Prusament PETG Signal White Nozzle: Bondtech 0.4 Layer high: 0.2 Infill: 60% cubic Rafts: No Supports: No

Pobrania
95
Polubienia
16
Ocena
5
P
PrintablesTestoMane

Simson KR51 Schwalbe Schlüsselloch Dichtung

Dieser praktische Lochschutz schützt die Kante um das Lenkerschloss-Loch der Simson Schwalbe . Perfekt für alle, die ihre Schwalbe sauber und gepflegt halten wollen. ✅ Merkmale Material: TPU (flexibel, wetterfest, langlebig) Montage ohne…

Pobrania
91
Polubienia
8
Ocena
0
P
PrintablesDIMMEL.design

Duschkopf-Halter – Wandhalterung mit Dichtung

Dieser universelle Duschkopf-Halter mit optionaler Dichtung ist ideal, um deinen Duschkopf stabil an der Wand zu befestigen. Die Halterung ist einfach zu montieren, platzsparend und eignet sich perfekt als Ersatz oder zusätzliche…

Pobrania
90
Polubienia
36
Ocena
0
P
PrintablesFilip Waluda

Ducati Monster 900 (ZDM900) Kupplungsdeckeldichtung // Clutch Cover Seal

Gedruckt mit FlexiFil™ Filament Infill ca. 25% Grid

Pobrania
81
Polubienia
10
Ocena
0
P
PrintablesTorsten Siebert

Dichtung für DDR 20 Liter Kanister und Ausgießer aus TPU

Die alten Dichtungen sind meist hart, porös und halten nicht mehr dicht. Mit neuer Dichtung ist alles wieder OK.

Pobrania
79
Polubienia
4
Ocena
0
P
PrintablesBernd66

Mittlere Dichtung für Siphon 32mm

Neulich musste ich am Wochenende einen Siphon reinigen. Dabei ging die Dichtung kaputt. Ich habe sie kurzerhand konstruiert und mit TPU gedruckt.

Pobrania
76
Polubienia
6
Ocena
0
P
PrintablesOBA

M50x1.5 Blind Stuffing + Nut and TPU-Sealing / M50x1.5 Blindstopfen + Mutter und TPU-Dichtung

M50x1.5 threaded blind stuffing to close unused M50-openings. Unused PG42-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…

Pobrania
70
Polubienia
3
Ocena
0
P
PrintablesLucas F.

Simson Schwalbe Parklichtdichtung - ( 34257 )

Einfach aus Flex drucken. Viel Spaß damit. ;)

Pobrania
67
Polubienia
7
Ocena
5
P
Printablestingeltangelbob

Midea PortaSplit Fenster Abdichtung

Midea PortaSplit Fenster Abdichtung

Pobrania
64
Polubienia
10
Ocena
0
P
PrintablesOliver Frerichs

Dichtung

Dichtung für Gardena Anschlüsse

Pobrania
60
Polubienia
0
Ocena
0
P
Printablesdocmech

VW T4 Dichtung für Kurbegehäuseentlüftung

Funktioniert! Zumindest am AJT (2,5 TDI 88PS). Gedruckt aus TPU, 0,1 mm, 15% Infill. Einbau ging recht stramm, habe es mit der Spitzzange in U-Form gedrückt und dann am Platz aufspringen lassen.

Pobrania
59
Polubienia
12
Ocena
0

Pumpendichtung für Bestway Flowclear Sandfilterpumpe 58404-18

designed in FreeCAD, printed on Anycubic I3 Mega S, Cura 4.8 standard settings for TPU, flexible filament Sunlu TPU Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 200 Infill: 15 Filament:…

Pobrania
57
Polubienia
7
Ocena
0
P
PrintablesOBA

PG42 Blind Stuffing + Nut and TPU-Sealing / PG42 Blindstopfen + Mutter und TPU-Dichtung

PG42 threaded blind stuffing to close unused PG42-openings in housings. [1] Thread type: PG thread [2] Diameters for PG42 opening: a) threaded hole: 52.5mm / PG thread b) drill hole without thread: 54.0mm [3] Sealing: An optional…

Pobrania
56
Polubienia
6
Ocena
5
P
PrintablesOBA

PG36 Blind Stuffing + Nut and TPU-Sealing / PG36 Blindstopfen + Mutter und TPU-Dichtung

PG36 threaded blind stuffing to close unused PG36-openings in housings. [1] Thread type: PG thread [2] Diameters for PG36 opening: a) threaded hole: 45.5mm / PG thread b) drill hole without thread: 47.0mm [3] Sealing: An optional…

Pobrania
55
Polubienia
9
Ocena
0
P
PrintablesOBA

PG48 Blind Stuffing + Nut and TPU-Sealing / PG48 Blindstopfen + Mutter und TPU-Dichtung

PG48 threaded blind stuffing to close unused PG48-openings in housings. [1] Thread type: PG thread [2] Diameters for PG48 opening: a) threaded hole: 57.8mm / PG thread b) drill hole without thread: 59.3mm [3] Sealing: An optional…

Pobrania
55
Polubienia
6
Ocena
5
P
PrintablesArmin

Spiegeldichtungen Ersatz Yamaha YZF-R 125

Die modellierten Bauteile dienen als Ersatz der Spiegeldichtungen, wenn man Spiegel an den Lenkrädern Montiert hat und die Standartmäsigen Spiegel abmontiert. Der Ersatz wurde an einer Yamaha YZF-R 125 Baujahr 2023 montiert und sieht sehr…

Pobrania
54
Polubienia
2
Ocena
0
P
PrintablesPrintyet

HT-Rohrsystem DN32, DN40, DN75 und DN100 – Bögen und Verbinder mit druckbarer Dichtung

Nach dem HT50-Set hier die vier anderen gängigen Nennweiten: DN32, DN40, DN75 und DN100. In jeder Größe der gleiche Teilesatz, insgesamt 44 Dateien.…

Pobrania
52
Polubienia
5
Ocena
0
P
Printablesfbnkmml

Simson Steckdosen Dichtung

Hallo, ich habe hier eine passgenaue Dichtung für die originale Steckdose erstellt. Gedruckt habe ich das mit TPU. Viel Spaß damit Category: Hobby

Pobrania
49
Polubienia
4
Ocena
5
P
PrintablesOBA

M63x1.5 Blind Stuffing + Nut and TPU-Sealing / M63x1.5 Blindstopfen + Mutter und TPU-Dichtung

M63x1.5 threaded blind stuffing to close unused M63-openings. Unused PG48-openings in housings are also possible to close with this blind-stuffing set, but the opening must be widened to >63mm for the blindstuffing to fit. [1] Thread…

Pobrania
46
Polubienia
4
Ocena
0
P
PrintablesJürgen Weigert

Waschbecken-Dichtung

A seal for my Bathroom sink. The plug is a removable metal and plastics item that is up, when the drain is open and down when the drain is closed. The original seal was old an dlo longer a tight fit. Dimensions: the seal sits on an inner…

Pobrania
45
Polubienia
0
Ocena
0
P
PrintablesPlutho

Bike Pump Rubber Seal - SKS Fahrradpumpe Gummi Umkehrdichtung Multivalve

In TPU 85A gedruckt ist es ein idealer Ersatzteil für viele SKS Fahrradpumpen. Kann gedreht werden und somit für Fahrrad- und auch Autoventile benutzt werden.

Pobrania
45
Polubienia
5
Ocena
0
P
PrintablesRubenSeiffert

BVF 22/24 Dichtung für MZ 125/150

Die Dichtung passt für alle BVF 22mm und 24mm Vergaser mit Zentralschwimmerkammer der Modelle MZ ES 125/150, ETS 125/150, TS 125/150 und ETZ 125/150. Die Dichtung muss aus TPU gedruckt werden. Im Slicer kann die Dicke Variiert werden,…

Pobrania
44
Polubienia
6
Ocena
0
P
PrintablesJohannes Frey
Pobrania
36
Polubienia
1
Ocena
0
P
PrintablesKonner

Flachdichtung Flansch

Schablone zum Schneiden einer Flanschdichtung

Pobrania
36
Polubienia
2
Ocena
0
P
PrintablesPrintyet

HT50 Rohrsystem – 90°, 87°,40° und gerade Verbindungsstücke mit druckbarer Dichtung

Dieses Set umfasst 3D-druckbare HT50-Rohrverbinder (DN50, Außendurchmesser 50 mm) in drei Varianten: 90° Bogen, 87° Bogen und ein gerades Verbindungsstück – jeweils mit integrierter, ebenfalls druckbarer Dichtlippe. Die Maße orientieren…

Pobrania
35
Polubienia
4
Ocena
0
P
Printablesobservatoer

KTM/Husky/Gasgas Dichtung Kupplungsausrückzylinder

Finding myself unable to get a new sealing from the dealership in time, I made my own sealing for the clutch actuation cylinder. Printed with TPU filament. My aim was a temporary solution to get the bike running, but it works perfectly…

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesD3D

Anycubic M7pro Deckel Harzbehälter mit und ohne Dichtung

Benötigte eine Druckfläche von 280mm Maße sind 280x180x10 Layerhöhe 0,2mm sollte ausreichen. Bei Druck mit Dichtung, die eingefärbten Bereiche einem anderen Material wie TPU oder TPE zuweisen.

Pobrania
34
Polubienia
2
Ocena
0
P
Printableseof
Pobrania
34
Polubienia
1
Ocena
0
P
PrintablesLinuTec

Dacia Lodgy Gummidichtung

Dacia Lodgy Gummidichtung

Pobrania
34
Polubienia
6
Ocena
0
P
PrintablesRobus

Siphon gasket / Siphondichtung

Radius 16mm / Diameter 32mm. Fusion files included for adjustments. Printed in TPU.

Pobrania
32
Polubienia
0
Ocena
0
P
PrintablesJan

Siedle Vario 511 Dichtung

Erstatzdichtung zum Drucken in TPU Die original Dichtung besteht aus Schaumstoff und zerreicht leicht oder löst sich mit der Zeit auf.

Pobrania
29
Polubienia
4
Ocena
0
P
Printablesptrckbs99

Sachs 505 Schablone Kupplungsdeckel Dichtung

Schablone für die eigene Herstellung der Dichtung des Kupplungsdeckels am Sachs 505. Der Motor war in vielen beliebten Mofas und Mokicks von Hercules, KTM etc. verbaut. Einfach auf Dichtungspapier auflegen, abzeichnen und ausschneiden.

Pobrania
26
Polubienia
0
Ocena
0
P
PrintablesRipped

Gärglas Dichtung / Fermentation Jar Seal (Browin)

Die Dichtung die mit dem Gärglas kommt, ist viel zu dünn. Diese Dichtung ist flexibel und sitzt perfekt im Deckel, sodass das entstehende CO2 seinen Weg durch das Gärröhrchen nehmen kann. The seal that comes with the fermentation tube is…

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesRubenSeiffert

BVF NKJ Schwimmerkammerdichtung Simson SR1/SR2

Diese Schwimmerkammerdichtung ist passend für BVF NKJ 12, 13 und 15mm Vergaser mit Zentralschwimmerkammer. Passend für Simson SR1, SR2, SR4-1, KR51 Baujahr 1964, SR4-2 die ersten Baujahre, Tümmler Bootsmotoren mit NKJ Vergaser und…

Pobrania
25
Polubienia
7
Ocena
0
P
PrintablesIngo Krause

Gehrungslehre für Zimmertürdichtungen

Das ist eine Lehre um die Zimmertürdichtung in 11mm entweder auf 45° oder gerade abzuschneiden . Einfach die Profildichtung einlegen und dann mit eine frischen Cutterklinge runterschneiden

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesJoergH

Ultrasonic Cleaner Deckeldichtung - Seal - Vevor JPS-10A 2Liter

Deckeldichtung für Vevor JPS-10A 2Liter 175x160mm Mit Pattex Classic Kontaktkleber befestigt. Filament: TPU

Pobrania
24
Polubienia
6
Ocena
0
P
PrintablesSuM.Schiedt

Abdichtung für Filamenttrockner / Sealing for filament dryer

Abdichtung für Filamenttrockner Für die Verwendung mit unserer MMU haben wir uns einen Filamenttrockner und Trockenbox von Sovol gekauft, den ich für die direkte Verwendung ein klein wenig modifiziert habe. Ich habe die…

Pobrania
23
Polubienia
3
Ocena
0
P
Printablesd3rdav3

DK Shutter Belt Cover | Gurtdichtung für Rollläden

Multiple belt covers compatible with old european shutters. Needed Materials: Brush seal: https://amzn.to/42lmIH1

Pobrania
23
Polubienia
0
Ocena
0
P
Printablesgregor
Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesCromli

Dichtung Verschluss Wasserbett

neue Dichtung für diese Art von Stopfen für Wasserbetten, sollte auf viele verschiedene Modelle passen. Habe es aus FlexFill 98A gedruckt mit 0,1mm Detail, und 50% Infill, wobei das nicht wichtig ist bei dem kleinen Durchmesser.

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesMichael Manthei

Flaschenhalskanister Dichtung

Dichtingsring 89mm außen, 74,5 innen

Pobrania
21
Polubienia
0
Ocena
0
P
PrintablesModellaner

Simson - Benzinhahn - Dichtungsset 4-Loch

Die schnelle Hilfe bei Undichtigkeiten am Benzinhahn. Ein Dichtungsset für 4Loch Simson Benzinhahn. Mit Jeweils 18 mm und 26 mm Außendurchmesser. Gedruckt mit Benzin resistenten TPU auf geschliffenem Pertinax (für eine glatte Oberfläche)…

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesJoas

Dichtungsring

einfach zu drucken

Pobrania
20
Polubienia
3
Ocena
0
P
PrintablesRubenSeiffert

MZ 125/150/250 Tankdeckeldichtung

Diese Tankdeckeldichtung hat eine Dicke von 2,6mm und sollte nach meinem Kenntnisstand bei allen gängigen Modellen von MZ aus DDR-Zeiten passen. Die Dichtung muss aus TPU gedruckt werden und die Dicke kann im Slicer Variiert werden.

Pobrania
20
Polubienia
7
Ocena
0
P
Printablesdukestah

door sealing - Türdichtung

Replacement for main door sealing. I've couldn't find the correct type for my door since all of the common sealing are too small so I decided to print them myself. I've used TPU90A which is perhaps a bit too stiff, a softer material would…

Pobrania
18
Polubienia
18
Ocena
0
P
PrintablesBernd

seal for simmer pot, Dichtung Simmertopf

Replacement for a worn seal on the simmer pot Ersatz für eine verschlissene Dichtung am Simmertopf Print instructions The material is very soft, but tear-resistant. When loading the filament, it slid between the gear and the housing. I…

Pobrania
18
Polubienia
0
Ocena
0
P
Printablesandilee7

Waschbecken Ablaufgarnitur Dichtung / Basin Waste Set Gasket

Mit der Original-Dichtung der Ablaufgarnitur war beim Flussstein-Waschbecken der “Deckel” zu tief unten und das Wasser konnte nicht gut abfließen. Mit dieser Silikon Form kann man sich eine erhöhte Dichtung herstellen, damit das Wasser…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesJanik112

Dichtung T6 Kennzeichenbeleuchtung / replacement seal license plate light T6 VW

Ich habe eine Ersatzdichtung für die Kennzeichenleuchte meines T6 gebaut. Diese passt bestimmt auch an andere Autos. I built a replacement seal for the license plate light on my T6. This will definitely fit other cars too. Printed with TPU

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesOliver

Dichtung zu Dispenser

Damit das Nutella Glas im richtigen Winkel fest sitzt.

Pobrania
17
Polubienia
1
Ocena
0
P
Printablesaw583

Ventilschaftdichtung Einpresshilfe

Habe hier ein Werkzeug entworfen um Ventilschaftdichtungen sauber und ohne Beschädigungen zu montieren. Habe es für einen Opel X20XEV Motor entworfen, sollte aber auch bei anderen Motoren funktionieren. Vorne ist ein Dorn um die Dichtung…

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesTomTom

Fischer 1723 Dichtung für Kabeldurchführung 0ben und unten

Fischer 1723 Dichtung für Kabeldurchführung 0ben und unten, zum Schutz des Tretlagers. Leider hat Fischer da ein riesen Konstruktionsfehler bei einem so tollen bike eingebaut, dass man nur so Abhilfe schaffen kann. Zusätzlich bitte das…

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesBenjamin

Thermomix Griff handle Vorwerk TM3300 und Dichtung

Ohne Stützmaterial druckbar auf der Seite liegend. Der Griff passt auf den TM3300. Bitte eine etwas längere Schraube mit Unterlegscheibe verwenden. Ich habe mit PETG gedruckt. Die Dichtung ist fester als die alte wenn man TPE druckt. Aber…

Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesHolle

Blinkerdichtung Yamaha DT175mx und weitere Klassiker

Blinkerdichtung Yamaha DT175mx und weitere Klassiker

Pobrania
14
Polubienia
1
Ocena
0

Triumph Tiger Sports 660 Dichtung Givi Monokey Kofferhalter

Die Monokey Kofferhalterung wird am Montagepunkt des Rücklichtes/Kenzeichenhalerung Verschraubt. Orginal von Triumph ist eine Dichtung an der Fläche verbaut. Die Givi Halterung ist komplett ungeschützt und lässt Wasser direkt in das…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesJagawams

Deckelsicherungen und Dichtung für Hühnersdorff 5l Weihalskanister

Die originalen Teile waren nach einer Weile gebrochen (siehe Bild). Eine Dichtung für den Auslasshahn wurde damals nicht mitgeliefert bzw. ist wohl nicht vorgesehen. Gedruckt mit Medium Flex Filament von Extrudr.

Pobrania
13
Polubienia
3
Ocena
0
P
Printablesmad3d

Brunnen Dichtungsring

Am Wochenende den Brunnen sauber gemacht. Leider waren einige der Dichtungsringe kaputt (Brunnen ist schon 10+ Jahre alt). Habe sie nun durch eigene Ringe aus TPU getauscht. Herausforderungen: Die Löcher in den Steinen waren auch noch…

Pobrania
12
Polubienia
1
Ocena
5
P
PrintablesCrash343

Dichtung innen 32mm aussen 45mm

Eine Dichtung die bei Schlauchtüllen verwendet wird. Innen 32mm, Aussen 45mm und 3mm hoch. Drucken mit TPU.

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesTritschi

Spare Gasket (Sealing, Dichtung) for Thomas Central Vacuum

After my sealings needed to be replaced I bought original sealings, which consisted of a simple foampad of about 2-3mm thickness. Now this is very simple and cheap material for 3EUR per piece. I had cleaned the surface of the ABS lid in…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesJanDark

Dichtungsring FRANKE Spüle Abfluß Drehknopf

Ein einfacher Dichtungsring für den Abflußbetätigungdrehknopf, mit dem die Spüle verriegelt werden kann. Passt bei einer FRANKE Spüle. Die Maße sind: 40mm Außendurchmesser 36mm Innendurchmesser 1mm dick Kann wahrscheinlich auch jeder eben…

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesTritschi

Sealing Weber Grill Thermometer (Dichtung)

No idea whether I lost the sealing or it was just not there? Anyway, drew the contour, imported to my favourate CAD system, fiddled a bit around. Then printed it. First was too tight, so I moderately reduced the overall thickness. Then it…

Pobrania
9
Polubienia
1
Ocena
0
P
Printableskmedia

Homematic HM-LC-Sw4-SM-2 Dichtung

DichtungTPU gedruckt Dichtung für Homematic HM-LC-Sw4-SM-2 für Homematic HM-LC-Sw4-SM-2

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesUgin

Dichtung Ansaugrohr Kärcher T10 ADV

Pimp my Kärcher Da meine Sauger T10 ADV am Handgriff Nebenluft ziehen, hab ich diese Dichtung erstellt, um die Verbindung zum Schlauch dichter zu bekommen. Designkonzept Diese Dichtung ist kompatibel mit dem Kärcher T10 ADV und…

Pobrania
8
Polubienia
3
Ocena
0
P
PrintablesThommy_Stark092

Air Up Click Ersatzdichtung

Air Up Click Ersatzdichtung gedruckt in TPU Infill=60%

Pobrania
8
Polubienia
5
Ocena
5
P
PrintablesBlackriver

Duschwand / Badewannenwand Verbindungsstück / Scharnier ohne Fuge für Silikondichtung

### [DE] Beschreibung Dieses Modell ist ein robustes, funktionales Ersatz-Verbindungsstück (Scharnier) für Duschwände und Badewannen-Faltwände. Beim Design habe ich zu Gunsten der Stabilität auf die Fuge für die Silikonfuge verzichtet.…

Pobrania
7
Polubienia
0
Ocena
0
P
Printables3dTobi

Ersatz-Dichtung Tankdeckel / Replacement Fuel Cap Seal - Toyota Avensis (2016)

🇩🇪 Beschreibung Diese Dichtung ist ein passgenaues Ersatzteil für den Tankdeckel eines Toyota Avensis (Baujahr 2016). Sie eignet sich ideal, wenn die alte Dichtung über die Jahre spröde, rissig oder undicht geworden ist. Da die Dichtung…

Pobrania
7
Polubienia
0
Ocena
0
P
Printablesh6

Filter Gasket for Pool Filter Vessel Hydro-S FSP350 - 170mm O-Ring - Dichtung - Filter Neck

I had bought a used pump which lacked the gasket, so I tried printing an O-Ring with TPU95 and it worked perfectly. The ring has a diameter of 170mm and a strength of 5.5mm and it fits the vessel. Works without leaks for two weeks now.…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesKoffeekooker

Gasket for 3/4" Connectors - Dichtung für 3/4" Anschlüsse

Very simple gasket to be printed in TPU. I use it for a Gardena type quick connector to a 3/4 thread for the garden with little tabs to secure it in the thread without glue. 2nd version is without tabs. Could not find anything like it on…

Pobrania
7
Polubienia
0
Ocena
0
P
Printablesphnx

Avatar Ersatz für Dichtung an der Gira 444030 Außensteckdose

Das ist ein Ersatz für die Dichtung an der Außensteckdose 444030 von Gira. Am besten mit TPU drucken. Vorher Nachher

Pobrania
6
Polubienia
1
Ocena
0
P
Printables09er

Würfelstecker Dichtung Hydraulikmagnetventil

Würfelstecker Dichtung für Hydraulikmagnetventil gedruckt aus TPU

Pobrania
6
Polubienia
0
Ocena
5
P
PrintablesJanSchrodt

Dichtung PCE Steckdose

Für den Einbau einer PCE Steckdose mit den Abmessungen 50x50mm hatte ich keine Dichtung. Gedruckt mit TPU Silk von Sunlu.

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesAskot

Dichtung TPU / Gasket / Coffee bean container extension for Siemens EQ500

This is a custom-designed gasket specifically made to fit the Coffee bean container. I created this to ensure a perfect print in 99,5 size ratio TPU

Pobrania
5
Polubienia
0
Ocena
0