5751 modeli
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
Wydruk około 5,37 €–6,56 € nettoWstępna wycena jednego wariantu
With these holders, you can neatly store your Dyson accessories. Update: Added STL Files
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Cube-Maker's…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Can be printed without support
Wydruk około 9,26 €–11,31 € nettoWstępna wycena jednego wariantu
Sanding Block - No Screws MODIFIED VERSION PETG, PLA, etc Layer height 0.3mm 3mf (and gcode) file pre-scaled 60% infill (doesn't really matter) No skirt or brim 25mm wide, about 33mm high and roughly 82.5mm long. Cut the sandpaper to…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Speaker stand for the Edifier R1280DB. There is enough room around all edges to easiy modify for different speakers. See the attached pictures for the dimensions. This will give the speaker a +- 13 degree angle.
Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu
For fuselage 2,3,4, and cover 2, you will need to lower it into the bed to get rid of the connector. As seen in the photo: You will also need to make sure supports are on, and remember that fuselage is 0% infill, flaps are 5%. Set the…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
You probably know all of these cheap lights that contain GU10 lamps. Most of these lights are kept very simple and can easily be converted to economical LED light sources. Compared to halogen spotlights, LED lamps not only have the…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Schlüssel, für die Größen 18, 22 und 24, um den Perlator von einem Wasserhahn zu lösen oder wieder anzuziehen. Die üblichen Werkzeuge sind sperrig und nie zur Hand. Leicht verstaubar lässt sich damit schnell ein Sprudlerkopf vom Hahn…
Wydruk około 3,60 €–4,40 € nettoWstępna wycena jednego wariantu
Print with with support. It require some strenght, mine broke after failing, I suggest some additional perimeters, like 5 or 6. Original design from thingiverse, modified with tinkercad: https://www.tinkercad.com/things/9RNSQpH9oMA
Wydruk około 26,09 €–31,89 € nettoWstępna wycena jednego wariantu
The light of my Elegoo Neptune 4 Plus was a little to bright for my liking. So i desgned this. My recommended print settings: * 0.4 mm nozzle * layer height same as file name * 4 walls * infill doesnt matter * You dont need supports Happy…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
EN: The holder consists of the following two parts: 1. universal holder, which replaces the standard Dacia cover on the top of the dashboard 2. removable stand for a specific type of mobile phone From the attached files, you can choose a…
Wydruk około 2,90 €–3,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recently added a heat pump to our pool, so I had to redo some of the piping and needed some brackets to hold them in place. Off the shelf brackets didn't work so I made my own ones and thought I'd share them, in case someone has the…
Wydruk około 2,27 €–2,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction The Single-Slit diffraction experiment is amazing ! “The Action Lab” has conducted the experiment using an crescent wrench with 2 razor blades and a laser pointer: This 3D model provides a magnetic holder for two razor blades…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
This strainer is easy to print and can be used in conjunction with the sink drain stopper. I printed it in PETG, however should also work with other materials. There are three different sieve types with different drain diameter offered.…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Upgrade your MMU2(s) or MMU3 to use the new chimney released with the MMU3. It gives you a more flexible way to adjust your probe to detect filament in the chimney. I have added threads for the chimney base so that it can be used without…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, these objects are perfect for anyone who wants to have his tools sort and tidy. Print it with your normal settings in PLA or PET. hope you like the model, give me your feedback in the comments. best regards mlax
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
differential - functional model
Wydruk około 8,19 €–10,00 € nettoWstępna wycena jednego wariantu
A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…
Wydruk około 17,71 €–21,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
This is a modification of the Wandering hour clock published by TypicalTinkerer. I only put modified files and additional files. I glued the white hour numbers with acetone. I glued a thin white minute dial on the black minute dial, but I…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Useful links first Download PDF User Manual (Build guide) Github repository with the software installer Latest script release page Support thread on Prusa Forum Introduction This is a small modification of Prusa Enclosure which offers an…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A special version for reinforced bike wall mount with special hook for SPD pedals. Tested with Shimano M520 pedals. I tested a other 3D design but my bike fall out of the mount and got damaged. Therefore I designed a super strong pedal…
Wydruk około 14,36 €–17,55 € nettoWstępna wycena jednego wariantu
Ein Satz verschiedener Haken zum Schrauben oder Kleben. Wir nutzen diese Haken als Schlüsselbrett. Die Bohrungen sind ausgelegt für Holzsenkkopfschrauben Durchmesser 2,5mm. Ungenutzte Bohrungen kann man mit "Abdeckung Bohrung" und etwas…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A drink/bottle coaster diffusor with simple LED lighting. The goal was to construct a small housing for a LED sticker without support. I hope you like it. It consists of a lid and bottom that are held together with a bayonet catch. The…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
This is a diffuser that can be used to evenly distribute the light from Philips Hue E27 LED bulbs. Other light sources may also fit inside. I originally made the diffuser for a triangular lampshade , but it also works as a stand-alone…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Respecting the copyright policy not only protects intellectual property but also supports the creators and the integrity of the 3D printing…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…
Wydruk około 1,26 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified original to easily accommodate the charging connection.
Wydruk około 2,33 €–2,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Slightly improved version to put anti-slip pads. I love this tablet stand. It's really easy to print (I printed it vertically). I lacked places to glue anti-slip pads. Now it is possible with 10mm slots. - - - Version légèrement améliorée…
Wydruk około 15,93 €–19,47 € nettoWstępna wycena jednego wariantu
This modified adapter-printer part changes the position of the steel ball in the filament sensor of the MK3S+ to fix detection problems. Background I was having failed detections with TPU filament because it was slightly compressed by the…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The stock MMU3 Selector tends to break when tightening the clamp that holds the FINDA in place. My first one broke, as it seems they made the hole larger than the previous model. I ended up remodeling a couple features on it. First, I…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I came up with this model when modeling this https://www.printables.com/pl/model/233841-finger-thread-spiner . Update: I added diameter sizes from 10mm to 20mm every 1mm.
Wydruk około 0,54 €–0,65 € nettoWstępna wycena jednego wariantu
As PrusaLink/PrusaConnect now supports USB Webcams, I've remixed Prusa's Raspberry Pi Zero frame for Einsy Rambo model to provide some protection for Waveshare's Ethernet/USB Hub pHat. The Waveshare pHat comes with brass spacers and some…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933
Wydruk około 4,92 €–6,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified eye piece for ByteSlinger's Portal Turret Pumpkin.
Wydruk około 1,95 €–2,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I sudgest printing upside down, first 2 mm with some reflexible material and the rest with transparent or translucent filament. Can be printed without supports.
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
Parts for retrofitting 3D color instruments from VW into Skoda Octavia 2.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Based on the EVA-Dry E333 Stand by DaJMasta https://www.thingiverse.com/thing:3747734. This a perfect stand for the EVA-DRY E333 Dehumidifier, works perfect for your dry box or enclosure. I'm using it in my dry box with some double-sided…
Wydruk około 4,31 €–5,27 € nettoWstępna wycena jednego wariantu
Inspired by the fullcontrol.xyz Pin-Support Challenge and the Arc Overhangs shown by CNC Kitchen , I wanted to print a chrismastree diffuser with 90° overhangs without support and here is the result. The overhangs are nearly perfect flat.…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
This cover is a remixed version of the Z stepper motor cable covers with more wiggle room for the cables to bend. I created it, because I felt the original cover where the LCD assembly cables leave the frame provides insufficient guidance…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Story: We have recently moved into a new apartment. It is a nice flat, but pretty old. The bedroom and living room have two rows of windows each. During the winter months a lot of humidity accumulates between those windows. In order to…
Wydruk około 11,47 €–14,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These clips are used to seal your open potato chip bag. Three sizes are available. Because there is a large printing overhang for the tabs, I included tree supports which removed easily.
Wydruk około 4,04 €–4,94 € nettoWstępna wycena jednego wariantu
Diffuser fitting a Ford Focus MK4 to install Aliexpress ambient lights.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Update 24/08/2023 : Add of an easiest way to plug a fan to your Mox with a unique part to print. The Turris Mox is an modular, open source and secure router. Even though this is a great router, it tends to get hot and reboot. To fix it, I…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
pdated version of the RPi Zero Frame to protect the Waveshare Ethernet/USB Hub pHat for Webcam usage with PrusaLink.
Wydruk około 0,64 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The include project is for 41mm bottle cap diameters and 13mm tube diameter. The provided Freecad sourse file can be modified for other diameters. Print settings: ZERO top layers 0.3 layer height 3 perimeters
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Here is the XXL-version of the diffuser for the Klarus XT21X flashligt. :-) Handy when you need to turn all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage, in the garage or on that…
Wydruk około 8,33 €–10,18 € nettoWstępna wycena jednego wariantu
This design of a 3D Maze is originally based on an article from Scientific American from September 1988. There this is called “a van Deventer Maze”, or “Oskar's Cube”. You can also find more info about Oskar van Deventer and his puzzles…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
Here is the diffuser for the Klarus XT21X flashligt. Handy when you need to turna all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage together with the Klarus Fottstand that you can…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model screws into a ceiling fan as a replacement part for one that had a diffuser that broke. It does not diffuse the light but provides an attachment for a new diffuser. A simple circular piece of diffuser plastic was glued to the…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BMW R1300GS Vario Side Pannier strap eyelet replacement in different colors, if you dont like the original black ones or have a broken strap eyelet The strap eyelets on the title picture are printed in PETG Galaxy Silver Caution: The…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DE: Dankeschön an Luca, diese Idee macht mir meinen Batterieorganizer noch wertvoller! AA und AAA Batterien haben oft im Bereiche des Plus-Poles eine ringförmige Kerbe. Damit der Hebel bei Vorhandensein besser daran angreifen kann habe…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
I don't like to do anything in plastic. My favorite material is wood but 3d printing is the perfect add-on to that. So I designed one holder for workshop towels and kitchen paper towels (core ~40mm) for wood (if you are interested in the…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
My MK3S was getting an ‘under temp’ error in a cold garage in the winter. Adding a safe dehumidifier helped keep the temp above the error threshold of about 50°F. The dehumidifier is essentially a stick-shaped weak electric heater. These…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
If you use the Coral Accelerator with the LimeLite and you use this (or the original) bracket, see the back-mount Coral bracket here https://www.printables.com/model/908221-coral-accellerator-bracket-for-limelight-bracket
Wydruk około 5,15 €–6,30 € nettoWstępna wycena jednego wariantu
Spare part for a trumpet-shaped ornamental fountain diffuser. Includes a threaded element as the fixing accessory. I needed it, so I redesigned it with some improvements. I love solving problems with 3D printing.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Boya flotador para tanque de agua de un deshumidificador marca Ufesa. Lo he realizado: En PETG con 2 perímetros y un 10% de relleno.
Wydruk około 3,83 €–4,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I don't like how this turned out. I was going for 30° of deflection, but 15° was all I got. So go instead with my 80- or 90-degree deflectors, which work beautifully. Instructions Print without infill, without solid top layers, and…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Reinforced bottle attachment to replace the broken original in the humidifier-flavoring night light fumigator
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Works in PETG but better in PA or TPU 95A
Wydruk około 1,34 €–1,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
scale it up, make it flat, integrate, do what you want ;) I print with 1 layer raft to compensate for fine lines. Had some trouble on a first print without it, they tend to curl up for there is too little adhesion for a single line. for…
Drink organizer. New model 2024 https://www.printables.com/es/model/781648-2024-stackable-rotary-drink-dispenser New model 2023 https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser And modular model :…
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
3D Printed Diffusion Panels Before printing watch The Next Layer video, Jonathan's setup is amazing and it explains what you can expect way better than I could in this description. At 8.25" (209mm) this is the largest printable diffusion…
Open ended Gridfinity tools racks. 3x3 through 5x6 grid bases with divisions between 7mm - 39mm 56mm total height 2mm walls all around - Strong enough for a toolbox Div widths are rounded down, most are +.5mm of extra space. Material…
Found this amazing model of an Ender 3 v2 to make mods for. This will save you lots of time and headaces. This STEP file allowes you to make designs for the Ender 3 v2 without having to mesure everything on the machine. I used Fusion 360…
Gears&Differential that are compatible with brick systems. Load the file into your slicer and right click, select “split→to objects”. Then pick the gears you need out of the stl/step and delete the ones you dont want to use - print laying…
Print your own junction box and attach various WAGO terminals. Whichever you need for your application. Secure your cables with zip ties or various cable glands. Use the threads for your cable glands or drill your own holes to secure the…
Pegboard in 3 different sizes. Fully compatible with the IKEA Skadis Pegboard solution. Print settings: 0.2 mm layer height No support needed Mounting: Please use 3mm or 4mm screws. Max head size 8 mm. Either place the board mounts or…
Updated: 2024/07/29 Added 180mm version (Silverstone AP181, mounting hole spacing 165mm). Updated: 2024/06/09 Remodeled the outer surface so now it can be scaled to more different sizes without making the shell too thin or too thick. It…
DUMMY 13 resized to 200% with a few alterations. 200% feels like how this model was meant to be. This model does rely on strong materials, I’ve had good results with high quality PLA. I've added a couple of test STLs so you can test your…
Use random seam position + classic wall generator. A simple wearable fidget ring that works as a spinner, allowing the outer ring to rotate smoothly around your finger. Designed as a compact and discreet fidget toy for everyday use,…
Cute articulated Dachshunds from https://www.thingiverse.com/coyotelc 3 lengths available from short to super long. Print-in-place. If your printer can do fairly decent overhangs, then supports are not necessary. If you like this model,…
diffuse you LEDs! Be sure to read the manual to see how. STLs for reference only. Use openSCAD to customize to your setup. need a box? Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Certain parts Resolution:…
This is a redesigned version of my previous water diffuser. It's intended to prevent holes forming in the ground while watering, and it allows for higher water flow rates. The diffuser is designed to connect directly to a standard…
I recommend printing the Solder Scroll tool and the modified spool from PETG. Press the larger area onto the backing, then snap the two parts together. After winding the soldering wire, clip it with the wire cutters flush with the coil.…
DNA double helix with a X-ray diffraction-inspired base in honor of Rosalind Franklin. Remixed from DNA helix by linew (https://www.thingiverse.com/thing:3980700). Rosalind Franklin's research as a chemist and X-ray crystallographer was…
This is a modified chest for the Dummy 13 posable figure by @soozafone for large, scaled up prints for easier assembly. The ball joint of the Dummy 13 figure uses a slightly undersized socket to provide the necessary friction. When…
Seatbelt Insert for your cars seat belt buckle to prevent the alarm from going off. Often while using the vehicle in the yard or off-road at slow speeds, one needs to be able to move around freely in the driver seat to see around the…
This phone holder is designed to hold your phone vertical or horizontally at three different angles: 60, 70 or 80 degrees. The holder comes in 2 different models, the lightweight or infilled model. The lightweight model prints on its side…
All these tiles can be used with the original Gravitrax. The tile are created with higher wall great for high speed applications. The tiles are printed in two parts and need a drip of glue to work, but no support. v2 Updated all the tiles…
T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…
20 different car logos you can choose from: alfa romeo aston martin audi bmw ferrari ford honda lamborghini lancia land rover mercedes benz mercedes mini nissan opel peugeot renoult Subaru tesla toyota volkswagen volvo If you like it I…
A ready-to-solve twisty puzzle box. No glue, no hardware, no assembly, and more difficult than ever! https://youtu.be/qvjMhq8SCBg https://youtu.be/FJXxZtWEMqw Printer Requirements This is not a difficult print, but it does require a fair…
Lego Differential that prints in 2 parts. Nozzle: 0.25, 0.4mm are OK (printed both) Layer Height: 0.1, 0.15mm are OK v2: 1. The Gear now has deeper wells for the Arm to fit in. 2. Changes were made to make the part much stronger. 3. The…
Herostrong3d uploaded a detailed digital sculpture of a "spiral dragon pillar". However the original model's pillar is off center and the dragon relief is separated from the pillar on one side. I solidified the model which now prints as…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
I had to slightly modify the filets on CSD_Salzburg's excellent SKADIS Universal Hook system, as on my particular Skadis they were a tad loose. Included are STEP files for a hook with my modified filets, a hook without filets so you you…
MagicShrimp made covers that can be installed on the Elegoo Centauri Carbon to stop debris from getting under the bed.In the second batch of printers the bed mount was changed, so I modified MagicShrimp's design to suit batch 2. You'll…
16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…
Horizontal stackable egg dispenser * *Added new model Extraramp with more inclination, more ramp, but same height, it is necessary to remove an area of the model once printed so that the eggs can pass through the floor below. Practical…
For more detailed info, watch the YouTube video: The modified nut may not be needed. The modified lever is a drop-in replacement that shouldn't cause any issues but may resolve issues with poor grip on the filament.
