Minimalist Gaming Mouse Display (With Dongle Slot) - Remixed for Ikea Skadis
Mouse mounts for ikea skadis pegboard.
- Pobrania
- 2297
- Polubienia
- 232
- Ocena
- 4,95
407 modeli
Mouse mounts for ikea skadis pegboard.
USB dongle USB -C dongle, SD Card and Micro SD card organizer. Category: Computer
EDIT: 1/12/2026 - After printing the original file from @JakJak I found the tolerances on the dongle slot version were way too tight for my dongle. Maybe my printer isn't tuned and maybe the 2C controller dongle is a different size.…
Do you have the fantastic Tribute64, Brawler64 or Admiral BT wireless gamepads, but notice that the dongles that plug into the front of your console...sag? This is especially true with the Retro Fighters Brawler64 and made worse with a…
This is a simple wall mount for the Sonoff Zigbee 3.0 USB Dongle. It is mounted on the wall using 4mm screws. It fits with almost any antenna you want to use because the included antenna is pretty bad. Be careful when removing the support…
Simple wall mounts for the Sonoff Zigbee 3.0 USB Dongle Plus and Plus-E. For use with home automation gear. Prints solid. Back side down. No supports. Dongle slides in from the end. lul.. Has space for a USB extension cable. Can be…
Wall mount for Sonoff Zigbee 3.0 USB Dongle Plus. I would advice printing regular version. With USB connected Dongle won't fall out even if there are some play. Printed it in PETG and PLA. PETG works great with regular version, but there…
Logitech used to provide a case for their mobile mouse models and with older models you could store the USB dongle inside the mouse. Starting with the MX Anywhere 2 they unfortunately stopped this habit and now you get the pure mouse and…
This case is useful if you have a nice!nano or pro-micro nrf52840 board that you want to use as a keyboard dongle . The lid snaps in place. There are 2 small holes in the case which align with the leds on the supermini pro-micro.
This is a cute little cap to protect the USB end of your mouse dongles and other USB equipment. You may have to tweak the scaling ever so slightly to get it to fit snugly without being overly tight. There's a surprisingly large variance…
This stops you losing the USB cap for your Steam frame VR dongle when it is plugged into your PC To install push fit onto the top of the dongle and it should hold itself on. Print files are in correct orientation and should be printed in…
It's better printed vertically, with the flat side facing the bed. Insert dongle from the open side with aerial facing the flat side.
This is a Apple Earbud holder, with a little slot to hold the 3.5mm to lightning adapter. update: v4 adds a hole so that both lightning and older 3.5mm jack versions will fit Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU Rafts:…
It's the controller stand by Goblygon with added slot for the USB dongle. Designed for the Ultimate C but fits the Ultimate 2C as well. This is done by taking the stand as-is, and subtracting a model of the USB dongle. Plus subtracting a…
Simple case for the nRF52840 dongle devboard. The top and bottom snap together very securely but are possible to pry back open with a fingernail/screwdriver/etc. The case doesn't expose any buttons or pins but it would be trivial to add…
Tried to refine things a little bit and implement suggestions I saw in comments. I recommend printing in thin layers, I did 0.12mm. The tongue for the dongle holder needs supports (see picture). Fitment for the dongle is perfect on my…
Držák adaptéru Sonoff Zigbee 3.0. Pro připevnění na polici nebo na zeď pomocí dvou šroubů. Adaptér je zajištěn v držáku zasunutým USB konektorem a našroubovanou anténou na druhé straně. Tiskárna: Longer LK5Pro Materiál: PETG, C-Tech,…
A simple case for a Raspberry Pi and the Sonoff ZBdongle-E, not ZBdongle-P! Pay attention, they are almost the same dimensions and look the same. I think all -E models have the label “Zigbee 2.0 USB Dongle Plus ” on them while the -P…
03.11.2018 Added Version 2 STL with additional Storage room for a 34mm ball. * I did not test print this one! consider it a WIP In V2 i did add a 36mm wide recess to allow the replacement ball to fit in. Also moved the placement of the…
A case for your Rii i6 / K06 Mini keyboard with an integrated USB dongle holder and phone stand! This version is reversible so you can put the mini-keyboard in either way!
Can hold USB dongles such as an Alfa Wifi adapter, or an RTL-SDR adapter to the back of your laptop screen. It's pretty universal, although the part that clips onto the monitor is designed for my Framework laptop. Fusion 360 Link:…
Compact and precise housing for Pico 2, without GPIO access, ideal for use with heatsink as DualSense dongle. https://github.com/awalol/DS5Dongle
Handy tool, to keep the SMA calibration connectors together so you don't lose them. Also makes it easier and faster to do the calibration. The SMA connectors fit perfectly into the holes without any glue. O = Open S = Short L = Load No…
After using another steam controller battery cover with external dongle and having multiple breaks, I looked at where I could add material and make other changes to make the injection-mold optimized original CAD file more suitable for…
Fits USB sticks up to 13mm thick and 20mm wide.
Thanks to @CPS_Systems_639833 for the improved remix. The friction bumps are working great. I wanted to screw and not glue the holder to a shelf, so I added 2 mounting holes. The holder works for the P- and E-version of the dongle.
This small SD/microSD card box combines three modifications I've seen other people use: An “improved hinge” that supposedly prints better. Replacing the external handle (more like a little nub) with a small opening to aid with opening.…
A simple and sturdy mount for the Sonoff Zigbee & Thread Dongle Plus (MG24). This holder provides a snug fit for the dongle and includes enough space to accommodate the included USB extension cable for better signal placement. There are…
Case for chinese USB dongle RP2350 (Raspberry Pi PICO2) from Tenstar Robot. PAY ATTENTION TO BOOT/RESET BUTTONS LOCATION before printing. I had to design this case because this particular PCB is not compatible with other RP2350 and RP2040…
Design Originally I was using a simple cap to protect USB dongle when storing it in its carry case with SpaceMouse. But the dongle was moving inside the carry case and with the risk to loose it Then I discover the cool design →…
Based on whocares333's Sonoff Zigbee 3.0 Dongle Mount. I added two hooks to mount this sideways on a Skadis peg board. Printing needs some supports for the holding brackets and the Skadis hooks.
Holds your dongle in place. Just use some self-adhesive tape. Comes in three different tighthnesses. 0.01, 0.1 or 0.2 mm clearance depending of what you prefer.
Same as the original model, but instead of the big logo-hole, it has neat ventilation stripes.
This model is a replacement I made for the 2.4ghz mouse dongle shroud of my Razer Basilisk X Hyperspeed that snapped in half. I tore apart the mangled original shroud, put the PCB into the slot of the print, and then put the metal USB…
This is a simple DIY case for my pwnagotchi. I used a Raspberry Pi Zero 2 W with USB Dongle and E-Ink Display. For printing I used some PETG for durability. Hardware List: Raspberry Pi Zero 2 W…
Sonoff Universal Zigbee 3.0 USB Dongle mount with 25x8x2mm magnet slots. I made this to mount my dongle externally to my rack for better signal.
Added recess for Command Strip (small poster) mount. Added hole for mounting. Flattened section to create a “bottom” for alternate orientation while printing. Added friction “bumps” to the side to add grip for dongle. Note: Using this…
Print as oriented in the model, I used ABS, but any filament should do. The tolerances are quite tight, so you may need to adjust scaling, but it fit up pretty nicely for me :) Requires soldering wires directly to the display/controller…
This is a heavily edited version of mwinzer's Nintendo Switch Dongle Mod. Check it out here: https://www.thingiverse.com/thing:2876621 I like how the original turned the dock into a proper dongle. A lot of the other docks on Thingiverse…
derivat of case for the Nordic Semiconductor nRF52840 Bluetooth Dongle
I wanted a nice way to mount my HTC Vive Tracker dongles on the wall. This will hold them just by gravity, and is roughly the size of two small 3m command strips. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX v2 Rafts: No…
I was annoyed by not having an integrated storage solution for the dongle when I take my Logitech G703 on trips. So I devised this cute little spider that comfortably sits in the powerplay/weight coin slot on the underside of the mouse…
based on the dongle storage piece by dlofstrom, this adds a stick to remove the trackball for cleaning, storage for the stick, and places to mount magnets so it's less messy when taking it apart. ErgoMXDongleStorage.stl is the original…
simple USB-C dongle for a backpack or keychain. Scale to 110% for good fit.
I was looking for a way to be able to display my favorite gaming mice but still be able to access them if I wanted to switch on the fly. I really didn't want to put them on any kind of stand on a shelf but I also couldn't handle the…
This mount can be used if you want to mount the USB stick somewhere not directly in the USB port (which is very much recommended due to interference). It has two small holes in the back for screws but I just taped it to the wall. It holds…
Added a PS Logo intended for use as a Dualsense Wireless Dongle. Also added a section where the LED can shine through.
To mount the BT dongle of my Daly BMS, I made a holder that also holds the USB plug in place. It fits tight (depending on printer tolerances of course) - but it should be a one-time thing - so I like it. Maybe scale it up by 1% or so if…
The original had two small parts holding the Sonoff that easily snapped. I widened them and connected them to the main body of the model to solve this problem. I used organic supports to print this on a cheap (and silent) Artillery Hornet.
This remix adds a place to store a 2.4GHz dongle together with the controller. Insert the dongle into the hole behind the controller. Supports needed only for Skadis mounting part, the hole can be printed as bridge.
Remixed from ‘HyperX Cloud 2 Dongle Holder’ from Thingiverse. I've looked but it seems to have been removed so I can't provide a link. I added the 2 screw holes and made it so that the dongle can put placed in and removed from the holder…
Case for Dongle (Nice! Nano v2) A hole is provided on top for the function reset
Simple holder for SteelSeries Arctis 1 Wireless headphones, would work with other headphones of the same brand with same cable extender for dongle. Jednoduchý držák pro sluchátka SteelSeries Arctis 1 Wireless, bude fungovat i pro jiná…
I created this so that you can use any USB cable (most have a different size “head”/receiver section), so others on here and thingaverse didn't work. This hold you can use zip-ties to hold in place (pics I didn't trim the ends). You can…
This is a remix of the regular wall mount with a place to store the usb dongle
Holder for your OBD2 dongle. Version with Snap-On logo Version without logo Buy me a Coffie
This is a remix of loudaslife's wall hanger on Thingiverse, I expanded it to make room from a dongle and extender slot. Depending on your printer, you may need supports depending on how you choose to print it. I printed it in white PLA…
Attaches to joysticks to store the dongle when you travel with the controller. Provides some level of protection for the joysticks as a bonus. Yes the stand has a slot for the dongle, but are you really using it? Updates 2025-11-30 made…
Never loose small USB-receiver or -sticks again. Store them in this easy and fast printable organizer :)
AFK Gadget When configured this device makes certain you are showing as always online. This little USB device will connect to your computer work an emulate a physical keyboard It will press the tab button every N number of seconds to set…
The GameSir Cyclone 2 has two slots on the top for attaching a phone holder, this model repurposes them to hold the included USB dongle for travel. Might work on other GameSir products if they use the same attachment slots. Tolerances…
Two versions available. Print it solid, or print without top & bottom layers & an infill to suit your style. Uses the USB-C nomad style charging dongle sold by Core Devices. Will not fit the old style Pebble Corp charging cables. V2…
Mouse dongle cover, designed for use with UGreen USB to USB C adapter .
This is a remix of Kytor's SNES controller stand. I wanted a version that didn't have the dongle slots at the back, so made it myself. Other than the removal of the dongle slots, some material has been added at the back of the stand for…
Never loose your USB dongle again! Because there is no storage space on the Steam Controller for the included USB Bluetooth dongle I designed this super simple and easy to print clip that snaps on the thumbstick. Check out my other…
I designed this simple keychain adapter for USB-A dongles. It was intentionally designed to fit tightly to prevent the dongle from falling out and getting lost. It should be compatible with all USB-A devices, including pendrives and…
Makerdiary sell an nRF52840 dongle for Bluetooth development. I bought one without a case, but I should have really got the one with a case. No matter, I have a 3D printer. It's best printed in white, so that the LEDs can shine through…
Dies ist eine Kleine Halterung für die Sonoff Dongle Plus MG24 Montage Möglichkeiten Schrauben, Kleben oder mit max. 6 Magneten 5 x 3 mm die Aussparungen schon auf der Unterseite vorhanden. Diese Halterung ist so konstruiert dass das…
This version originates from agepbiz 's model . I added a slot to store the USB-Dongle to connect the controller to the PC.
This is a simple holder for the lightspeed USB dongle. Should work with any Logitech mouse with the round thingy (i.e. G502) but most useful for G903 which lacks dongle storage. You need to glue two magnets in the holes to make it work.…
I remixed the model to be able to attach it to my 10" netwrok rack
It's always annoyed me that theres nowhere to store the USB dongle within the mouse, so I added a holder to the Mouse Bumper by schuetzi99. I also added a screw recess so the stock screw can be reused. Because of the thinner recess the…
This is cool invisible mount for the Sonoff Zigbee 3.0 USB Dongle Plus. Fit very well for E versions. Does not fit for P versions (P versions bigger) No supports needed!
Thank you @THL_94116 for inspiration and great original model
A simple mouse stand/display with a slot for USB A and USB C dongles. Also included are STLs for no USB slot and no side inserts (single color). Fits both mini and regular sized mice. Inserts should be able to be press fit into the slots.…
Tired of digging through your bag to find your USB-C headphone dongle? This handy-dandy keychain clip keeps your adapter cord at the ready while keeping dust and debris from entering into the connectors. Plus it is an aesthetically shaped…
Raspberry Pi Pico 2W | Slim SnapFit Case | DS5Dongle A modified Slim SnapFit case for the Raspberry Pi Pico 2W, designed for use with the DS5Dongle project , which turns the Pico 2W into a receiver for the DualSense controller. About This…
I'm worried that the USB connector on the Steam Frame dongle could break easily due to its size and weight if it's pushed accidentally, particularly from above. So I designed this small part to provide additional support for the USB…
It hangs, and holds your USB dongles. I had a fair few that didn't have a place to live and wanted a way to more easily store and transport them. Takes a 3mm cord if you want to hang your dongles. I printed it in a random Silk PLA of…
This model is not a direct remix. It was designed from the ground up, but it was inspired by the general idea and form of the following model: https://www.printables.com/model/1334284-8bitdo-ultimate-2c-controller-stand-with-usb-and-c I…
I keep breaking the apple 3.5mm to usb c dongle so I designed a strain relief for it. There is a straight version and angled version. Make sure to download part 1 and part 2 for the respective models. Assembly: Embrace the true apple way…
A simple housing for the LIGHTSPEED dongle of a G435 headset. My drawing is on Oneshape.com. Unfortunately, I'm not a great professional. Maybe someone would like to lend a hand again ;-)…
The prospector is desktop ZMK dongle with full color LCD screen that shows the currently highest active layer, battery levels of the split keyboard halves and a Caps Lock indicator. Since the light sensor is not mandatory, there's enough…
I just wanted a way to get low-latency audio on my GameSir G8+ and couldn’t find anything online, so I created this myself. It holds my Galaxy Tab S9 without any issues, and I designed it so it should work with different tablets and…
Donations Appreciated for Supporting My Filament Buying =) https://paypal.me/mrmcquiston?country.x=US&locale.x=en_US
Don't loose your Steam Controller dongle! Uses clip from HpInvent's design, but with this one you don't have to worry about losing the clip itself. Inserting dongle into the case You need to insert the dongle USB first at an angle. It's a…
Keep your USB dongles safe and organized—never lose them again! Available in a version with a keychain loop for easy portability.
SnapBox Raspberry Pi 3B/4/Zero - (Resin) Here a few examples out of our first product line, SnapBox by DIYBlender.com . we got casings for: - RaspberryPi 3B - RaspberryPi 4 - RaspberryPi Zero - RaspberryPi Camera's individual/optional…
**UPDATE: 27/01/2017: Fixed the sizing problem some users reported.** I would recommend printing a couple at the same time so the prints have time to cool off.. or at least decrease the print speed. I got tired of forgetting the lightning…
This model holds five USB devices to put near your desk or anywhere. It accepts lower profile USB flash drives, wireless USB dongles, and others. It features rounded edges and no supports or brim are required.
this is a remix of Mark579 - https://www.thingiverse.com/thing:2392074 Thank you !! it's a great model ! I just made some square holes for the USB dongle Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No…
While loved the work by @kaiha on Printables, I wanted to wall mount my dongle. so I made this remix to do just that. This Remix keeps both the air vents and cap holder, WITH a back plate to make wall mounting better/easier. Credits: All…
I purchased an Anker TM137G Wireless Vertical Mouse but the USB dongle was damaged. I verified that the receiver was working, and decided to try to make a replacement piece. I carefully removed the metal by bending the two pushed in tabs…
I use Ring Fit Adventure to exercise occasionally but use a USB dongle instead of the dock. My previous wall mount didn't hold just the console, so I redesigned it. This mount is slotted inside to hold the console without controllers…
One piece case for USBasp board (the black one). My case has the holes for LEDs and uses pieces of clear filament as light transmitters. There is also cutout for the 5V/3V3 switch. When the board is in case it can be set with help of a…
Exactly like the original model ( https://www.thingiverse.com/thing:2803664 ), but I've repaired it and split into 2 parts (otherwise slicer splitting could fail, etc…)
Screen: 0.96 inch OLED IIC Serial White Blue OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board For Arduino For some reason its bit smaller compared to existing dongle cases, so had to create this one. Features: - Easy to…
I wanted a case for my DualSense dongle, so I modeled it up with inspiration from the other models already made. Both BOOT and RESET buttons are available to press, with the BOOT button marked differently by a small indent. Get the USB-A…
I added a thicker bottom / back, widened the clippy bit and put a bigger circle on it and placed a hole in it for a keyring to go through it the keyring helps act as a stop to prevent the dongle slipping out, also any movement / swinging…
Someone on the Gridfinity Discord asked for a simple 1x1 bin to hold two USB dongles, so I made one using my parametric FreeCAD template :)