58 modeli
This a quick and easy to use card holder that doubles as a vase. Just print in you normal vase mode settings.
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
There are several ways to select the next section of the track in Thunder Road. I opted for this variant. These are road tiles to choose the next Route. Just put them in a bag, shuffle them and draw one. No support needed Colour change at…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
Improved version for faster prints, only needs supports for the center plunger. 17/L,19/x,26,34,45 also works with P320/P229
I wanted multicolored resouces for Wingspan with color on both side. Original project was perfect, but those tokens was too big and too thin (3mm). So I resized them to 80% but made them 5mm thick while keeping 0.6mm top and bottom…
Updates 2026-07-15 added "Italian for One No Percy" (168 cards, 56 x 88 mm), thanks to @Neizo_195722 Description With this card box you cannot only carry your cards wherever you want - with this box you also can play wherever you want!…
SFA Shell Caddy for loading Doubles in competitive shotgun shooting. Update 12292023 - Added the end stop stl file… This utilizes a single back plate design and alignment tabs on the clips for easy setup and adjustability. 12 mounting…
It's the same coin as originally created by Marco_7099, I just transferred the pattern on the other side as well. For a nicely detailed result print it standing upright with tree-support underneath (see picture). This way it's possible to…
Slip on barrel accessory for the Nerf DoubleStrike, minor shell cutting required (Cut the front sight post and corresponding bottom barrel post flush to the ridge). Features a single length of nerf tac-rail on the bottom Length approx…
Im sure this is a remix of a similar design but with a thicker base to accommodate the use of double sided tape. I have downloaded other plates similar but the backing plate was too thin to accommodate the use of double sided tape. The…
Print standing up for maximum strength. May work with other nerf blasters.
Wall hook for clocks, paintings, etc.. Should be used with double-sided tape. Size: 20x60 I can make it for your size upon request.
Slip on barrel accessory for the Nerf DoubleStrike, minor shell cutting required (Cut the front sight post and corresponding bottom barrel post flush to the ridge). Features a single length of nerf tac-rail on the top Length approx ~150mm…
I printed on regular PLA with 20% infill, wall side down.
A Double Slide Trombone. Double the slide, double the Fun ! To utilize just one slide and produce higher notes on the trombone, simply eliminate the connection and insert the mouthpiece into the first hole. Please refer to the…
This ambidextrous pouch allows the pistol operator to store two magazines of cartridges in his nondominant pants pocket. It holds the mags upright, minimizes rattle, and keeps pocket lint out, in contrast to carrying magazines in a pocket…
this is the remix from [Original Model](https://www.printables.com/model/125291-single-hand-key-organizer/remixes)
Fun when you are bored at home or work! Just turn it upside down to disguise it as a pen caddy when your boss comes :) OPTIONAL STICKS INCLUDED
Quick remake of the original model with space on both sides of the case for the hand grips making it easier to open. My partner wanted this as a desk insert but was having a hard time opening it when I printed the original model. Printed…
Remix of https://www.prusaprinters.org/prints/9077-parametric-bit-driver-hex-2mm-to-10mm I have made the original design to be doublesided. You can choose the 4mm or 6.25mm version. Both are in reality a little bit bigger so the bit can…
Following on from the other small parts bins, this is a collection of more trays for the doublesided small parts storage . there are 5 individual models, 2 corner pieces, 2 side pieces and the back piece is used for the rest of the tray.…
Created a double-sideddouble-sided HarleyHarley Davidson skull keychain
I recently acquired a second L-Tek dance pad for playing two-player and doubles mode on Stepmania. While L-Tek provides an official doubles mode bracket, it requires screwing and unscrewing it every time you set up the pads, which is a…
After printing the original part that this remix is based from, I noticed that the internals of my Doublestrike are slightly different to the original reference photo. I quickly realised that this is due to mine being a grey-trigger…
Questions @ https://www.reddit.com/user/Ok-Shock-7736/ disclaimer: The one problem I am still trying to improve is the latch mechanism, if u hit the mag at an weird angle too hard it can open the trapdoor and essentially “brick” the whole…
This is a hanger to hang pictures on the wall with the help of some doubliesided Tape. It is remixed to fit Ikea Frames
Most carbon filters sit inside the chamber, where the heat slowly cooks the activated carbon and shortens its life. This one mounts externally on the rear panel of the Voron 2.4 350mm (LDO kit) — the carbon stays cool, and the filtered…
all credits to @cmos_119708 for the original design! i've just edited the back and made a small 20.5mm wide funnel to accommodate the use of 20mm doublesided tape if you do want to support me feel free to donate a cup of coffee
you asked about a bigger version for lager miniatures - you get a lager version! This version of my miniature transport box has double the size of the standard ones and is designed to carry bigger miniatures. You can take out the divider…
I don't wantet to drill holes in the sideboard so i designed this to use it with an doublesided adthesive tape. Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Notes: I userd a brim just to be sure!…
A pair of measuring cups on a stick. Coose yor volumes. Originally made for measuring cornstarch for oogoo rubber. But equally good for coffee powder or anything else. Instructions Eiter use the common decimal fractions (in cubic mm): An…
I uploaded a couple of versions. The Single.3mf is “the original” where i have a lot of bodies, assign them to a colour (you either need 4 extruders, or set up your single extruder to be 4) and then print it. Yes there are a lot of…
My First try of a SLA on a friends printer prints in 8min on Resin a Simple Boardgame Addon for more diversity on the gamefield
Features Thin (14.29 mm) No bearing required Fits a wide range of spool center holes Necessary hardware 3 x M3x20 socket head or button head screw 1 x M3x14 socket head or button head screw (this one can be longer) 3 x M3 Nylock nut 6 x…
English translation below ************************* Support antivol permettant de mettre à disposition du public une console : Nintendo Game&Watch Double Screen Ce support antivol a été créé par Lionel AMALRIC pour les besoins du festival…
Mount it to the wall or to the frame. First insert the wires for the double socket and sonoff to the junctionbox and connect it using Wago connectors. (i used 3 minis) put the topplate on the junction box and insert some small m3 screws…
magnetic cablehook for four powercords, needs one round 8x8mm neodym magnet
This coin is double sided with UPX on it. I found out that it printed best while standing.
Držák pro snadné zasunutí lahvičky pro napájení křečka/morčete/králíka.
Thanks to Just Joshi for this original part. The Shelf has a depth of 36.5cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. !!! Attention: You need a big printbed to print…
Cover for double 24V switch in my office, to block unintended switch off
I took this great trophy stl and turned it into a doubles for my league. (also in Rochester,NY lol) I also made a base for it. Category: Sculptures
P1 is the base, P1.5 can be printed multiple times depending on how big you want the final stand to be and P2 is the upper part. With each piece being 3.5cm/~1.5in.
This is a remix of stynkebutt's Double SMA Tail piece for the Quadcopter Frames of the FR-Series. So it should match the FR7, FRH, FR8 and so on. stynkebutt created a pretty tail piece, which perfectly fits the Matek SAM-M8Q GPS module.…
Be careful of running them too hot, but minimal load and they well be fine, print them on their side so the layer lines are strong, consider 95A TPU so they are tough and won't shatter like PLA.
Cable & Headphone Holder (Double‑Sided Tape Mount) This compact under‑desk cable and headphone holder is designed for easy 3D printing and simple installation. It can be mounted using standard double‑sided tape, allowing you to keep your…
I've tried several lid holders and decided to build my own version. This holder is mounted without screws via 1mm thick clear double sided mounting tape. The model is parametric with really two parameters - holder inner length (set to lid…
Gearboxes for boardgame HEAT: Pedal to the metal . Two sizes - minimalistic (smalest as it can be) and bigger (fit on board). Doublesided! From one side is classic gearbox for shifting from the other just putting in places. Simple one…
This is a first attempt to make a double scissor mechanism which is contained in a box that fit in your hand. It should be easy and straightforward to assemble. The double scissor itself will likely need to be printed with a brim, except…
Extension for Sure.t Talon Mags Doublestacked and holds about 11 rounds whatever Mag size you use Use two more dummys than your magazine can hold rounds e.g. 6 round capacity = 8 dummys(dummies are the ones with the big hole in the…
I designed this intentionally tongue-in-cheek, 'True' toothpick drone frame to be built with actual toothpicks for a Botgrinder Print & Rip challenge. This is NOT a practical build, but the people requested I share it and who am I to deny…
Simple Wall Hook to use on wall with doublesided tape - for example if you got no nails or you don't want to drill.
Pocket-sized part with three functions and 9 g of PLA+. Can opener. The wedge-shaped tongue, 1.2 mm at the tip (six 0.2 mm layers), slides under the pull tab of pet food or soda cans and works as a lever. Thinner chips, thicker won't fit…
Most carbon filters sit inside the chamber, where the heat slowly cooks the activated carbon and shortens its life. This one mounts externally on the rear panel of the Voron 2.4 350mm (LDO kit) — the carbon stays cool, and the filtered…
Simple Wall Hook to use on wall with doublesided tape - for example if you got no nails or you don't want to drill.
Most carbon filters sit inside the chamber, where the heat slowly cooks the activated carbon and shortens its life. This one mounts externally on the rear panel of the Voron 2.4 350mm (LDO kit) — the carbon stays cool, and the filtered…
