Liczymy pasujące modele…
There are a few versions of the DROK AC Power Meter on Amazon "40-300V 100A HD" version with model number D85-2058 on it's front bezel, is apparently smaller in dimensions than the others. So, I made this printable adapter that can be…
Images of the printed and mounted version is an old version. Updated version has the holes spaced 1 inch apart for the Triton Pegboard.
Hydroknecht Hydroknecht is a smart modular 3D-printed Hydroponic system. Based on a rain-tower design it can be built to fit multiple modules with multiple planters. One planter can fit plants with a base diameter of 6 cm. The tower is…
Hmozdinka pro sadrokarton
There are many Buck Converter enclosures posted here, and none would fit what I thought was a common 1-button LED Buck Converter (66mm x35mm), which I bought on amazon. (…
This is a case for this DROK DC-DC USB QC buck converter. https://www.amazon.com/dp/B087RHWTJW?psc=1&ref=ppx_yo2ov_dt_b_product_details There is strain relieve for the soldered wires, sized for 20AWG alarm panel wiring.
Attention this design assumes you know how to properly handle high voltage safely. I take no responsibility for anything, should it go wrong. This design was originally from SpaceGoats. https://www.thingiverse.com/thing:4604901 It did not…
Slouží k upnutí brusné mřížky a následnému broušení sádrokartonu. Brusný prach je odsáván vysavačem. Hadice 34-35mm Print instructions Vše je tisknuté z PETG a 100% výplní Díly jsou k sobě lepené dvousložkovým lepidlem UHU. Lepidlem je…
I wanted to simplify my prototyping process. This a simple chasis design for the Drok panel mount style modules. There are two flavors of the design. Suggest changes to the design if you would like to see them if there is enough interest…
A case for a DROK buck converter with a snap case. If you have MMU capabilities you can choose to print the additional words/symbols in color for easier viewing. (I'm waiting on my MMU3 upgrade). Has holes to access the terminal screws…
4x4 Outlet Box with a punchout for Drokbox LED Power Meter and NEMA outlet plug Depth has been increased to 2.75in to allow for additional fit of power lines and induction collar used for Drok. Can be printed without supports but would…
This is a remix of the 24VDC laptop power supply enclosure; it fits the same DROK step-down converter but has no special plugs or anything. This is just a case to put it in with vents on the side and holes for power in and out. Should fit…
Simple case for Drok Bluetooth module. The top press fits onto the bottom - it's a tight fit, and the Drok board is secure. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .2mm Infill: Any…
This voltage converter has no mount holes so I had to quickly put together this to mount on my robot. As printed it is snug and can hold the buck in motion. Best printed with supports at those overhangs. No scale needed to fit.
Using this as a PSU for my OctoPi (using 24V from the einsy and stepping that down to 5V)
First you hear the fluttering of wings in the darkness. Then, you stare in horror as the mutated winged head of Cydrok flies towards you furiously! Run, run for your lives! A terrible curse transformed Cydrok into the monstrosity that you…
I designed this enclosure for a small/cheap AC power meter (with power factor) I purchased for under $20 on Amazon: "AC Power Meter, DROK Digital Multimeter AC 50-300V 20A Voltage Ammeter Amperage Volt Current Power Factor Energy…
This is a case for the Drok Digital Step Up Volt Regulator DC 8V-60V to DC 10V-120V 15A 900W Numerical Control Boost Converter Automate Power Supply Module . I use this to charge my electric skateboard from a battery bank or DC power…
I recently needed to use a DROK DC buck converter on a golf cart battery upgrade project. I landed on the DROK DC Buck Converter CNC, 10V-100V to 0V-90V, DC to DC 12V 24V 36V 48V 72V 10A 900W Adjustable Power Supply Voltage Regulator…
A snap-together, no screw or glue, print-and-use box with integrated buttons for the DROK LM2596 DC-DC power supply. This is for the version with display and 4 buttons, with or without heat sink. This box is higher than necessary just to…
Newly Updated** I took the well thought out generic l298n Case, provided originally in its original form by Atom's Laband, and rebuilt it from the ground up to support a bigger l268 and amended ports. I have included 1 variations: ( My…
I've this laying around for two years a Drok PSU and I wanted to give it a little more protection against my own mistakes with cables. Print instructions I printed in PLA with support due to the weird shape of the cover and my inability…
This is a bracket for vertically mounting a DROK power supply unit (PSU) onto metal universal DIN rail clips (27.45mm x 48.29mm). It has tight press-fit openings for the M3 nuts, and countersunk holes for the M4 screws. Threads will cut…
Mount the ZK-DP60 on a 2020 extrusion. Nothing too exciting. Print on the flat side, no supports needed.
I needed a base for the "Class AB Amplifier, DROK 2.1 Channel 80W+80W Stereo and120W Pure Bass 9-18V 4Ω Audio Amplifier Board" But I could not find one so I made one. Notes: working progress It's two pieces for right now, you can delete…
V-slot mount for the Drok Buck Module Voltage Regulator found on Amazon here: https://www.amazon.com/dp/B07JZ2GQJF?ref=ppx_yo2ov_dt_b_product_details&th=1 . This replaces the back panel using the original screws. Slides into V-slots from…
This case was ALMOST perfect for my needs. The fit is precise and the size is compact but I wanted to be able to use a USB-C PD Trigger as my input for the DROK Adjustable Voltage regulator. I modified the original faceplate to be able to…
A simple bracket mount for a DROK LCD Display Digital Multimeter useful for eBikes. In this case the mounts are fitted for the stock stem of the SurRon electric bike. https://www.amazon.com/gp/product/B07B4CWKRJ Print Settings Notes: PLA…
This is a small pot for raising plants with hydroponic. The second Inlay(water) is for use with the smallest “Leni Hydrokultur”-Waterlevel gauge. (For this Inlay you need support) Prevent waterlogging with the raisers (3 or 12 mm) use 5…
Printable in One Peace, or to glue together in two.
My power supply blew up and Prusa is out of stock of replacements. I found a great replacement on Amazon, but it had different dimensions. I made a holder for this power supply and moved the parts to the new holder. The power supply is…
This is a case for the DrokBT Bluetooth audio receiver module the following features: Antenna through hole Hole in the lid for LED light (put a clean-cut 11 mm transparent piece of filament into this hole to act as a light channel) Hidden…
These function the same as stock. I printed them solid in PETG, but I imagine they'd be fine out of any material including flex. Category: Electronics
This is a super well-fitting case for the Drok DKP6012, an awesome multi-purpose high efficiency power regular I use for everything step-down. (This is the amazon link, not affiliate or anything) This thing can take 10-75V in and output…
original model fitment was perfect, just needed a mounting hole added. mounting hole size is 3.5mm
Enclosure for USB Load Tester, DROK DC 3-21V Load Battery Tester. Inspired by https://www.thingiverse.com/thing:3007086 But because there is only an STL file for the button, I designed mine from scratch. I used M2 screws to secure the…
Bottom case for the DROK 200407 12V to 5V DC USB Buck Converter Dual USB Port Fast Charger Board with an integrated Synta/Vixen-style finder dovetail for mounting on a telescope. Reuse the hardware and top case that came with the product.…
This is a 2S41 Drok scale model STL of a real military armoured vehicle (tank, self propelled gun, or armoured carrier) for display and diorama building. Made for tabletop wargaming terrain, model collections, historical build projects,…
Desktop enclosure for the Drok DC 4.5-100V Digital Voltmeter Ammeter Multimeter panel and 50A shunt. There are pegs built into the base to hold the shunt in place without needing screws. There are vent holes in the front to allow some…
Small angled mount for mounting the Drok dual temp sensor with lead out for wire. The sensor comes with 2 probes, and for this case I am using it to monitor water temp for cooling of a CNC spindle vs air temperature. Handy to know any…
This is a pretty simple enclosure for a Drok powermeter ( https://www.amazon.com/gp/product/B07YC1XHKQ ), requires qty6 #4 screws It is designed to accommodate PG19 cable glands ( https://www.amazon.com/gp/product/B077R1RT2T ) with 12awg…
vymodeloval jsem úchyt brusné mřížky na brousek sádrokartonu.
Two-Part Enclosure: Top and bottom parts are designed to snap together (click-join). The alignment ridges and slots visible along the edge support this. Screen Mounting: The screen is inserted from the top , fitting into the recessed…
A version on the Drok box top with powerpole output.
This is a mountable bracket for the Drok 24v 20 Amp power supply found on Amazon . The power supply can be mounted at either orientation within the bracket. The bracket should work for any of the 215x115x50mm Drok Power Supplies but the…
This is the first 3D model that I have made. I could not find any previous case for this DROK® Mini USB DC-DC 3V to 5V Voltage Step Up Converter Volt Boost Regulator Module 2A Mobile Power Supply Charger Board with Battery Indicator. I…
Newly Updated** I love this raspberry pi rack made available from jonthemiller! I needed a tray that would support a DROK L298 Dual H Bridge Motor Controller and rebuilt it to support a L268 and amended ports. with ventilation. I have…
This is a frame or template to cut out the exact size hole needed for mounting the DROK Digital Multimeter ( https://a.co/d/0i2nt2lX ). If you're cutting skills are as bad as mine this also serves as a good frame or moulding to hide all…
XY-LJ02 DROK Timer relay case
Bottom case for the DROK 200407 12V to 5V DC USB Buck Converter Dual USB Port Fast Charger Board with an integrated Synta/Vixen-style finder dovetail for mounting on a telescope. Reuse the hardware and top case that came with the product.…
This is the first 3D model that I have made. I could not find any previous case for this DROK® Mini USB DC-DC 3V to 5V Voltage Step Up Converter Volt Boost Regulator Module 2A Mobile Power Supply Charger Board with Battery Indicator. I…
This is a case for the DrokBT Bluetooth audio receiver module the following features: Antenna through hole Hole in the lid for LED light (put a clean-cut 11 mm transparent piece of filament into this hole to act as a light channel) Hidden…
This is a small pot for raising plants with hydroponic. The second Inlay(water) is for use with the smallest “Leni Hydrokultur”-Waterlevel gauge. (For this Inlay you need support) Prevent waterlogging with the raisers (3 or 12 mm) use 5…
With the original version, I found the supports for the lid were in the way when trying to get the converter into the enclosure, but I was able to get it in with some forcing. Unfortunately I then found that there wasn't room for me to…
