195 modeli
A friend of my son was going to cosplay Model N from Murder Drones. I got asked to print Model Ns cap badge. After some searching for references and Inkscape/OpenScad modeling, I have got a satisfactory model of the badge. Printed dual…
Check out my other Murder Drones designs → here ← --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design…
You can find more keychains in this collection --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and…
Sketches Check out my other Murder Drones designs → here ← --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the…
Art made in cooperation with _.xenort._ (profile on TikTok) Printing and Drawing Time-Lapse Video ^^ https://www.tiktok.com/@_.xenort._/video/7531859369512799510 You can find more keychains in this collection --- Commercial Use --- By…
Use 608 bearings in the middle and print some cover handle things from other fidget spinners depending on preference. Also be careful as the corners are sharp and may be sanded down if you want to.
You can get a wire to attach the tail to the waist and might need a little drill to make a hole as the same size as the wire you use. You can do the same for the wire that is attached to the spike (I don't know the name of the thing ) to…
The vinyl caps that I have had for different SMA connector radio devices I have were always falling off. I made these with the correct ¼-36 thread so that they stay on and don't fall off. Print with thin layers for the best detail on the…
smol absolute solver. i made it into a pin
so... more = better Please see the accompanying video: https://youtu.be/hby6U47oV_k WIP, please see the older d
Working Door Master Key from Murder Drones. There is a hole inside for an RFID card so you can use it with Arduino. In other files there is a pdf with the label for the floppy disk.
I wanted to have a neat way to display and store my drones on my shelf, but i wanted it to be modular and easy to print. I tried to find something fitting online, but couldn't find anything that really met my expectations, so i hopped…
so... more = better \_(ツ)_/ Please see the accompanying video: https://youtu.be/hby6U47oV_k WIP, please see the older
I DO NOT technically own the rights to the original character (Uzi in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE…
It has 4 whistles that are really loud. It is 69mm tall and diameter is 20mm and fin diameter is 40mm. This is a smaller version of another bomb I made. Be sensible and don't drop over people or property. Print on end standing up. No…
Just needed it for a cosplay, might as well post on here.
This is the Crucifix Patch. It is a device from "Murder Drones." The show was created by "GLITCH" on YouTube, and they recently released episode 7 "Mass Destruction." SPOILERS In the episode, we are introduced to the Crucifix Patch or…
I DO NOT technically own the rights to the original character (N in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE buying…
You can find Uzi Keychain here Model made based on keychain from Glitch store Enjoy! Other Uzi Keychain here Same Art Style but V character can be found here --- Commercial Use --- By purchasing this design on Cults , you support my work…
remade the murder drones pins from the merch store you will need to change color by layer will be adding more:)
First of all: DM me on Instagram (@ente.fpv) so I can make a mount for YOUR frame specifically :) Say Hello to the DUCKY MOUNT The okayest mount for the DJI Action 2! The DJI Action 2 is known for having a VERY fragile backscreen . To…
use supports and set infill to 20
Just Go On Tinkercad And Look At The Model, Idk How To Describe Or Post A Picture On How To Build Certain Figures!
You can find N Keychain here In this design, you can see eyes are just a bit different color than haird, but both of them was printed from the same filament color (its 3 material print) There is a trick I used, just above first layer, I…
Hand Edit-hand (stronger).stl comparison: --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and get…
You have to modify the bottom part for your own frame, feel free to modify it in the f3d file. What you need: Pair of 20x5 neodin magnet into the front of the pod You need a pogo connector, carefull, you need the 4 pin one:…
Folding propellers for rocket drones What's a Rocket Drone you ask? Think of a Rocket Glider but instead of wings it has drone pods and can recover like a drone. One of the first successful ones I've seen is a Mars Lander being developed…
I DO NOT technically own the rights to the original character (Doll in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE…
I DO NOT technically own the rights to the original character (V in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE buying…
I learned kinda how to do armatures in blender did so very badly and have clipping issues between the hoodie and the arms this model might also be hard to print also includes an uzi model in blender with a armature that kinda works but…
A Sentinel I Made To Go Alongside Fortified Figures' Murder Drones Models. Resizing MAY Be Necessary Here, You Decide.
UPDATE 17.05 I noticed one part of the glasses was around 1-2mm smaller than the other. I don't know why I didn't notice this before, but I decided to fix it now and at the same time make the tolerance between the glasses and the holders…
ita a dummy 13 made like n from murder drones
I DO NOT technically own the rights to the original character (N in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE buying…
Overview Modular payload drop system designed for RC drones and planes. This setup allows you to release small objects remotely using a simple servo mechanism. --- Features - Lightweight design - Modular setup (single or dual payload) -…
murder drones cosplay Category: Costume
I DO NOT technically own the rights to the original character (Tessa in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE…
It' a Murder drones key chain thing or something, idk
I was invited by a local school to participate in their Egg-Drop science event and this is one of the results. The reason they invited me was because they wanted to do something different this year. Instead of dropping boxes to protect…
This is my first draft at making a standalone XT Lock, however it's based on a design I've been using built-in on a drone for 6 months without a single unplug, so I'm quite confident about the locking part. Requires an XT60-H connector…
I DO NOT technically own the rights to the original character (Nori in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE…
This mount is designes to use with almost any FPV Drone with a GoPro Mount style... Category: Hobby
This GPS mounting bracket includes a strap to more securely hold the GPS module. Great for Drone or other uses where the GPS module could fall out. It also provides some isolation for the modlue from the chassis of the vehicle. Designed…
UPDATE 04/23/2020: Added an updated version that extends the hex hole as requested in comments. New part is "Squirt_Hero8_Mount.Prop_Nut_Version.stl" Minimalistic GoPro Hero8 Mount for the Shendrones Squirt Printed in Sainsmart TPU and…
The GoPro Mount should keep the camera secure without any velcro or rubberbands. I would still recommend to put something arround it, if the fit isn't as snug as in my case. I usually use that mount for cinematic FPV flying, cause it's…
A simple slide to lock in connector for mounting VIFLY strobes to any drone including DJI <250g models. Use double sided tape to connect the light top to a flat section on the strobe (battery side etc) and the light bottom to a flat…
Description This is a Night Light using a skull similar to the unofficial logo of the Murder Drones web series. It uses an L LOHAS LED Night Light that is press-fit into the back plate. The light is then secured with four small clips that…
🔋 Ultra Lightweight 18650 2S2P / 4S Battery Holder This is a lightweight 18650 cell holder designed for high performance applications such as: • RC jets • FPV drones • Electric airplanes • Robotics • Compact high current battery packs The…
A solver ring make sure to scale it for you finger or whatever your putting it on its quick to print if its small
I rebuild the GPS module TBS GPS M8-2 from Team Black Sheep with Tinkercad. So everyone could make a holder for every drone one likes without having the need to measure the module before that. Just design a holder of your liking and…
🔋 Ultra Lightweight 18650 6S Battery Holder This 6S 18650 holder was designed specifically for high performance applications where weight and rigidity matter: • RC EDF jets • Long range FPV aircraft • High voltage drone builds • Robotics…
I was invited by a local school to participate in their Egg-Drop science event and this is one of the results. The reason they invited me was because they wanted to do something different this year. Instead of dropping boxes to protect…
One of the silver ends on the bead fell off so i decided to make it more stylized with the Murder Drones logo. I have 2 versions, newer and old one. I dont recommend using the older version, i just put it here if somebody wants to remix…
Original terraplane ducts are molded but i tend to break them regularly. So i decided to model this almost 1:1 copy of it. Printed it in LW-PLA - its too brittle (yellow one), but then i used Prusa PETG and it works just fine. (cant find…
This is a compartment box that is same size as the batteries for the DJI Mini 2, 4K and Specta Mini Drones. It will store inside the drone and can hold spare propellers and such. Has a dovetailed sliding lid with a finger catch to held…
j figure from murder drones
my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports
Essentials for hand: Glue for assembly Pair of Black Gloves https://www.amazon.com/gp/product/B0DD3HTPWZ/ref=ewc_pr_img_3?smid=A2E3VXFBA6RD5C&th=1 Necessary for Electronics: 130 DC Motor…
Supported models: SYMA X8SW/X8SC/X8PRO/X8S-03 Original legs are universal, but because i had to rotate the pods in relative to the base of the legs, left and right versions are inevitable. I reccomended to use PETG or 98A TPU as a…
I was invited to participated Fort Wort Academy's Egg-Drop event again this year. Since there was a problem with eggs getting stuck in the cups last year I decided to revisit the design and make some improvements. With the rig from last…
No Supports needed I suggest ABS for the coasters and PLA for the coaster holder.
If you use these Vifly strobe lights: https://a.co/d/1DqF4pc You can store two of them in this print for transportation. I would like to develop another outer shell to snap this holder into to cover the top. Stay tuned!
I made this model as part of my Blender learning process - it is my first from-scratch project and might not have the best topology in some places. With that being said, I present to you a figurine of SD - J from the popular animated…
I made this model as part of my Blender learning process - it is my second large project ever and it still may not have the best topology. As you may see I am taking my time painting the model, so i do not have a finished picture of it…
Universal GoPro Mount Shendrones Squirt Slammed. Visit 3dprintsfpv.co.uk if you want any parts printed.
Remote cargo hook. Suspended from a wire below an RC vehicle.
Sized correctly for a 65mm tiny whoop, a little room for batteries
It's my design of a canopy for Toothpick Drones remixed from @drunkmasterfpv! It's for a Micro (19mm) camera and either a Nano (14mm) camera with adapter. The size was compatible with Whoop boards 32.5*32.5mm (26.5mm mounting holes).…
Come support these models over on Patreon Buy my time, Not my models. Near future combat (or not) drones at 1/100 (15mm). Designed to print on a filament printer so you can bend the fans to suit, I don't have a resin printer but I don't…
Printed using PLA with supports. No really way to use it, made just for fun.
If you like the design please support my work. Even a small tip of 1$ helps. Thank you. paypal.me/GuyWithDrones Body print for Shendrones Thicc drone ver 2.1 frame to protect electronics from the dust etc. Made to hold crossfire antenna…
ELRS Antenna holder for ShenDrones Squirt V2. Holds an antenna from a Happymodel EP1, can be used with two zip ties to secure but is very snug so doesn't really need the zip tie. Printed with TPU with NO SUPPORTS at 35% infill. Print…
WARNING Comply with your local law regulation regarding transmitter power. Failing to do so expose you to fine nor jail. You're warned. The F is that Boosting the RC/Video link of your drone that use 2.4G with directional antenna and…
I made this sketch at school during math lesson, at home I convert this to final drawing and next made 3D model ^^ Efficiently spend school time hehe Check out my other Murder Drones designs → here ← --- Commercial Use --- By purchasing…
Absolute Solver from Murder Drones, this is a multi colour designed model. ready to print import it into bambu labs select your colours and hit print. No supports or special requirements except a multicoloured printer. Enjoy!
This is my remix of the great job of @FlyHighFPV for a GoPro mount based on Doom. My remix is for a Toothpicks Drones and takes a micro fpv camera (19mm) or a nano (14mm) camera with adapter (like RunCam Nano 2 that comes with it). Print…
Made to house a 4mm antenna tube, Radiomaster ELRS antenna, and the HGLRC tuning adapter usb extension. https://www.hglrc.com/products/hglrc-tuning-adapter-usb-transfer-extension-cable-module-for-flight-controller
Printing Time-Lapse Video ^^ Link here You can find more keychains in this collection Ready print Profiles for Bambu Printers on MakerWorld, link Below:…
llavero del absolute solver, se imprime en plano sin soportes
The GepRC Naked GoPro has a much smaller mounting tab that is not compatible with the usual GoPro style mounts. This part fits in place of Shen's 3D printed GoPro mount to solve that problem. I used GepRC's included thumbscrew as a heat…
This is the second version of the mount I created a few months ago. The main improvement in Version 2 is that the camera is positioned further forward on the drone, ensuring your propellers stay completely out of view while filming. Print…
Keychain protective case with 0,2mm thick transparent "foil" This “foil” is used from transparent cap from yoghurt. Used bolts: 10x M1,6x4
This a great design that translates well to my valve cap project. The files consist of two different drone valve caps. Print one each or both together. The original drones can be found on thingiverse.com under my account. This is a remix…
I've got way too many hobbies to warrant a designated backpack/carrying system for each one, so I created this simple carrier to allow me to use a snowboarding/skateboarding/hiking pack (or any other back with ample compression or storage…
You can find more keychains in this collection --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and…
Painted Murder Drones logo. Badge and keychain versions.
Print in TPU and enjoy!
These short landing gear mount under each motor and provide enough clearance for a TeraRanger EVO LIDAR. They are quick and easy to print with no support required. I used PETG.
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! Dronewallmount Fits 2" - 8" Drones Flexible mountingdistance Easy and fast print…
Fully printed platform for launching drones. Designed for convenient launch from any surface. Only 4 M4x35 screws and 4 M4 nuts are required as additional components. The platform itself is connected using 6mm aluminum rods. The maximum…
Uses 608 Bearings. Spin time will very from bearing to bearing and how much infill you use.
I've remade the original mesh in cad software and modified the model to be compatible with larger (taller) drones. It fits my 7" with 20mm landing gear perfectly. I've also thickened the arms and added reinforcements. I recommend printing…
UPDATED 11/30/19 - Improved USB-C Dust Cover alignment Added an integrated USB-C Dust Cover to the Shendrones Squirt DJI FPV Holder.
Drone weapon platforms designed for the 6mm game Ortus Novae. You can use them for your RPG or wargame of choice, as they work great at any scale and print well without supports! Ortus Novae is a simple, free, easy-to-learn,…
I made a compact ultralight slip case to protect my new DJI Mini 3 drone and RC-N1 flight controller when motorcycle camping. It's as small and lightweight as I could make it. Each of the overlapping side walls are 1.5 mm thick, so the…
