Wyniki wyszukiwania: drying

Fleshlight Drying Rack (Original and Go) print in place

Bottle Drying Rack

🌀 Bottle Drying Rack – A modular, space-saving drying stand for bottles, jars, thermoses, glasses, and more. Keep your kitchen organized and your containers dry with this versatile drying rack! Whether you're drying glass jars, water…

4x5 Sheet Film Drying Rack

Holds up to 8 4x5 film sheets.

CamelBak Drying Helper for 3l Bladder

A hook and and a "spreader" to help you dry your 3l CamelBak bladder. This is a remix of theRatchets excellent design for 1.5l bladders - thanks for sharing the .f3d. I made hook and spreader and bit larger so that it fits better for my…

12-Hour Filament (PETG/ASA/ABS) Drying GCode for Bambu Lab P1S

## 🚨 CRITICAL MATERIAL WARNING 🚨 This drying profile is ONLY suitable for: - PETG - ASA - ABS ### ⛔ DO NOT USE WITH PLA ⛔ The bed temperature of 80°C will DAMAGE PLA filament! - PLA begins to fuse at temperatures above 60°C - Using this…

Drying rack for breast feeding pump storage bottles and baby bottles

A drying rack for storage bottles of breast feeding pumps and/or baby bottles. STLs are included for the Medela storage bottles, used amongst others on the Medela Symphony and the Medela Swing, and for the Philips Avent Natural line of…

Lovense Solace sleeve drying stand

Drying stand for the Solace adult toy from Lovense. You can print it as one object, but I cut it in half in the slicing software, so I didn't have to use supports. Then glued it together with superglue. (Loctite Precision Max)

Thermos TC Bottle drying stand / Thermos TC Flasche Trockenaufsteller

A nice little print to stop your Thermos drinking bottle from tipping over. Ein kompakter Trockenaufsteller für eine Thermos TC Flasche (1 Liter), der das Umfallen währen des Trocknens verhindert.

True fruits bottle drying stand / True fruits Flasche Trockenaufsteller

I have a small collection of true fruits bottles and I reuse them regularly. I wanted to have a drying stand for them just like the one for the Soda Stream bottles I designed. So I adapted the design to fit the true fruits bottles. There…

Clothes Drying Rack Broken Rod Fix (single part, snap-on connector)

Created this quick fix for the drying rack. This model is designed for these measurements: rod insert diameter: 2.5mm bar clamp diameter: 14.4mm If needed, I can upload other sizes and create a proper parameterized design file.

Stained Glass Holder - Leather Edge Dyeing & Drying Rack - Expandable Display

Helpful Tool to Store Stained Glass or for Light Edge Dying or Drying Leather Edges after Dying, Painting, Gluing or Prepping Work Use with specially designed Holder for Leather Edge Dyeing & Drying Rack - Expandable Display 14 Slots from…

Tall Lab Glassware Drying Rack

A colleague uses 500mm tall glassware to analyze soil samples. Said a drying rack would be helpful. This is the result. Printed on Prusa XL in standard PLA. Model is appx. 300mm tall. Dries up to (4) four items at a time. Base resists…

Clothes Dryer Horse Clip / Repair Hook for Drying Rack

Clip to replace a broken one on your dryer horse with 15mm inner diameter rods. Print two halved pieces that join when forced into the rod. No supports needed due to half cut design.

Silverware Holder for Dish Drying Rack

Silverware Holder for Dish Drying Rack This model was fun to design and print, so let's take a look! I needed to print a replacement silverware holder for a dish drying rack because the original was literally crumbling. The replacement…

Sodastream Crystal Drying Stand

Simple Stand for airdrying up to 4 of your Sodastream bottles.

Jewelry Painting and Display Assistant – Bead Holder, Drying Rack & Earring Stand

This 3D-printed jewelry-making assistant is designed to make painting and assembling handmade wooden bead jewelry easier, cleaner, and more organized. The design features three useful sections: 1. **Painting area:** A board with 14 holes…

Drying Rack (Wäscheständer) Fix (Small)

This model is a remix of https://www.printables.com/model/250269-drying-rack-wire-repair It is a bit shorter and thinne

Drying rack

Manufacturing procedure: Material: PLA 3D Printer: FDM 3D printer, average print time 2 hours Slicer settings: 0.2 layer height Post processing instructions: Clean the stringing Assembly instructions: N/A

The ultimate vacuum robot barrier for drying racks! STOP THE ROBOT!

Because my vacuum robot likes to move above the drying rack's pipe, I made a simple and cheap barrier with carton for faster cleaning cycles. But that was a ugly solution. So now I've made a nice solution with using my printer. It's a…

RACK FOR DRYING SLIDES

Manufacturing procedure: Material: PLA, PETG 3D Printer: FDM 3D printer, average print time 1 – 2 hours, depending on settings Slicer settings: 0.2 - 0.3mm layer height Post processing instructions: Clean the stringing Assembly…

EIBOS Polyphemus Drying Rack (no supports needed!)

This adds a base to put spools and other parts on the Polyphemus that won't fit otherwise. Use with rotation disabled. Select material based on what you want to dry.

Foldable Clothes Drying Rack Repair Bracket

This is a simple, yet effective repair piece designed to fix broken foldable clothes drying racks. When one of the welded joints on my drying rack broke, I created this bracket to restore functionality and extend the life of the rack…

Thermos TC Bottle drying stand & add on

A stand to let your Thermos TC bottle (500 milliter) dry on the sink with add on for to put the cap

Kitsure Dish Drying Risers

This was a quick model I made to help elevate/raise/lift a dish drying rack over a drop in sink. The original design of the dish drying rack by Kitsure assumes that your sink is undermount and/or flush to the surface it's resting upon. In…

Rail Fix Clip for Clothes Drying Rack from the Reject Shop

This clip stops the rail from moving around for Clothes Drying Rack from the Reject Shop

Shoe Hook – Footwear Carrying & Drying System

Shoe Hook – Footwear Carrying & Drying System Wet, dirty, or bulky shoes often end up taking space in a backpack, lying on the floor, or cluttering a garage or entryway. The Shoe Hook is a simple 3D-printed system designed to carry,…

Holder for drying agent pad - suitable for IKEA SAMLA

Holder is printed with PETG and do not need supports. To fix the holder to your filamentbox (IKEA SAMLA) use wood screws ⌀3x10 (4x). Or cut a thread M3 to the blind bore ⌀2,5mm to use screws M3x10 (4x). The holder is suitable for a…

Glove drying stand

Just set them onto a radiator and put gloves on them. There are two different stands, one a bit bigger than the other. If you print one of each, you are able to stack them into each other, for better transport and storage. If you love…

Magnetic Drying Mount for Reusable Cotton Pads

This magnetic drying mount is designed to hold reusable cotton pads while they dry. It features built-in slots for 5x5x5mm square magnets, allowing easy attachment to metal surfaces like bathroom radiators or other convenient spots.…

Filament Drying Cover - Build Plate

A simple drying cover. Enjoy.

Stackable Bottle Drying Rack (5 variations)

Stackable Bottle Drying Rack This simple and practical bottle drying rack features a sturdy square design for stability and efficient drying. Its stackable design saves space and allows for easy expansion when needed. The hollow structure…

Drying Rack Locking Clip

NEW VERSION: I've rewritten this drying rack clip from scratch! Fully customizable to fit any rack. Check it out! Tired of struggling to fold your clothes airer? The innovative Folding Rack Latch is the solution you've been searching for.…

Drying rack hook

Easy to print hook for heated drying racks. Use PETG at least so it doesn't warp if heated. Brim can help if the long arm segments keeps peeling. Use at least 2.4 mm thick walls with 25% infil. For me bambulab white petg worked well with…

Customizable Bottle Drying Rack (5 variations)

Customizable Bottle Drying Rack This simple and practical bottle drying rack features a sturdy square design for stability and efficient drying. Its customizable design saves space and allows for easy customization and expansion when…

Stackable SodaStream Bottle Drying Stand

This stand is made for the drying of SodaStream bottles. Multiple stands can be stacked , regardless for which bottle. Currently there are models for the following bottles: SodaStream DUO plastic bottle (30 mm inner diameter) SodaStream…

Repair Clip for Clothes Drying Rack - 190 Sizes

Repair Clip for Clothes Drying Rack The metal rungs of drying racks tend to snap off after some time, leaving the metal part dangling. This clip fixes that. You will need to bend the rung so that it securely attaches to the clip. The clip…

Soap Dish - Quick Drying

Hello everyone :) With the way things are in the world right now, I decided to make a soap dish for next to the sink, but one which aids the drying and removable of water, making your bar of soap last you longer. The design was also made…

Drying Rack Feet - for Robot Vacuum

Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…

Travel and Camping Clothesline / Drying Rope / Laundry Cord

This is a remixed version of the excellent cord spool from Stubbsie to use it as a camping/travel clothesline. I added a hook to the shell of the spool and designed an another hook for the cord end. Printing Print in PETG or ASA/ABS with…

Repair set for broken drying rack with M4 threaded inserts

Repair set for broken drying rack with M4 threaded inserts I saw the repair kit for the broken strings on a drying rack by STxS . I tried it and it fitted for my drying rack. This remix replaces the M4 nut holder with threaded inserts,…

Desiccant Drying Trays for the Creality Space Pi Filament Dryer

First things first; make sure you have a filament that is suitable for the max temp of the dryer (70°C according to Creality) plus a margin to account for the heat being greatest at the back near the exhaust vent. Any filament with a…

Print in Place Fleshlight Flight/ Pilot /Go Sleeve Drying Hanger

Print Settings I printed a few iterations, at .02 mm layer height. The one pictured is not the final model and was printed before I decided to bulk up and smooth out the hanger portion. Consider Your Filament Please be careful with any 3D…

Vinyl Record Drying Rack

A friend of mine is an avid record collector, and has a vinyl record washer. He says that air drying the records is the best method, to minimize the potential scratches you might apply when trying to dry them by other means. He asked me…

CamelBak Drying Rack and Hook

Expands the CamelBak bladder for drying and hook to hand. Verified on the 1.5L bladder

SUNLU S2 Dessicant Drying Tray

The model is designed to be printed in two halves and glued together. I printed mine in eSUN ABS+, but you can also use other high-temperature materials (at least PETG). Note that some PETG blends can go soft if left to cook at 70°C for…

Camelbak Drying Stand

Drying stand for Camelbak and other hydration reservoirs - base is a water bottle/mug/cup drying stand by itself. Works for 2L and 3L bladders

Drying Rack Locking Clip Generator

I'm excited to share a brand-new version of my drying rack clip, completely redesigned in Fusion 360. While the original was very popular , it had one major issue: its dimensions were fixed. The only way to adapt it to different tube…

Hooks for drying on radiators

If you have a long rod 6-8 mm in diameter or several such rods, the functionality of this device can be greatly expanded. The source can be edited in Fusion 360.

Elegoo Neptune 4 pro eSUN Drying box

Hi this is my first time sharing a model hope you guys will like it Print setting normal it's ok Supports: yes Material: PLA

"DRY-POD" - The Ultimate Bottle Drying Rack

The last and only drying-rack you will ever print ;o) After printing and trying countless drying racks, stands and devices for all the water bottles we use for sports I couldn't find a single one that fits my needs. They either are too…

Dish Drying Rack

This design is a type of drying rack. I have created a small and large version of this in order to better accomodate the large range of plates/dishes one might wish to dry. The large connector will connect with 2 large drying rack prints.…

Soft bottle / Soft flask drying stand

Soft drinking bottle used in running sports are difficult to dry after cleaning. This stand makes it easy! Can be used for bottles with a narrow or wide opening and short bottles as well as bottles longer than the stand (grill needed) The…

Baby bottle drying rack

For parents on a budget who want a quick and easy way to dry their baby bottles, a 3D-printed baby bottle dryer is a no-brainer. This thing is super simple, made from a single piece of plastic with a curved base. You just hang your…

Rotating Fishing Lure Drying Rack

This is a Motorized Rotating Drying Rack used for getting an even coat of the sealing epoxy used on fishing lures after painting. The use of epoxy to seal lures is common practice but if you use a thin epoxy's like EnviroTex's Lite…

Salomon HydraPak Soft Flask 500ml/17 fl oz drying rack

There are 150mm and 200mm height options. Optional drip tray.

Travel Soap Box — Fully Customizable (OpenSCAD) — with drying tray, air vents and snap fit

A fully parametric travel soap case , which you can adjust to suit your own needs. It includes a drying tray , air vents and safe closure . Print as it is, without support. Available in the following sizes ( inner dimensions ): Very large…

Towel hook, drying rack hook

This one is for radiators with diameter around 24mm (0.95 in.) I printed this model with standard settings in prusaslicer, but the infill was around 25% I recommend PETG but PLA works as well It is very robust and can hold a lot.…

Bottle Drying Rack

Tired of your bottles tipping over while drying? This 3D-printable bottle drying rack provides a stable and efficient way to dry your bottles. Download the free design today and start enjoying a clutter-free countertop! Keep your kitchen…

Silica gel basket for AD5X drying boxes

I am attaching a 3mf file for Orcaslicer. Important! Set up the slicer according to this description. Set 0 layers at the bottom and top and 0 perimeters globally. Then add modifiers according to height and add approx. 5 perimeters to a…

Sock Clips (Improved V4) for Drying Rack

Sock Clips (Improved V5) for Drying Rack Sock holder that clips onto circular cross-section drying rack tubes. Improvements: Smooth printing due to the "teeth" being formed by curvature of the clips without additional cross section. Ca.…

Stick clip painting/drying base

I couldn't find a base for the Stick Clip to can/airbrush paint my Gunplas, so I designed this one. Hole are 5mm wide for Mr Almighty Sticks. (more sizes to come) It's the first version, and it takes pretty long to print. Feedbacks are…

Bottle Drying Rack for Soda Stream

A holiday gift for my Mom, who loves carbonated water ♥ It's a simple bottle drying rack for soda stream bottles. No more puddles, toppling bottles, or sideways bottles rolling off the counter. Print Settings Printer Brand: Anycubic…

4x5 Film drying rack

New version: Uses less material to print, but requires supports. Only takes 4 sheets, but sticking together isn't a problem. Drying area and hole is much bigger, corners dry more quickly than older version! Older version: Takes 8 sheets,…

Dish towel and sponge drying rack

BIO A time ago i crossed similar model somwhere on tiktok but could not find it anywhere so i made it by memory in fusion. The rack consist of 2 parts which is nice to print in different colors. There is no need for supports I recomend to…

Fleshlight table-mounted drying rack

The Bladder Buddy: Ultimate Drying Solution for Hydration packs (parametric)

Introducing The Bladder Buddy, the innovative 3D printed solution for drying your Camelbak or other hydration bladders quickly and hygienically. This unique hanger features an internal expanding mechanism that securely holds the bladder…

Beer Bottle Drying Rack

First version was solid, second version has cut outs which reduce the filament used by about a third. I printed these at .32mm layer height and .6 layer width (on a .4mm nozzle). The print for the second version took roughly 8 hours.

Diving glove drying stand

In the newest installment of “things that could've just been a stick and a piece of two-by-four”, here's my solution to drying out diving gloves. If you just lay them flat, they collapse and don't dry well. You could just hang them from a…

Bottle Drying Rack

The rack has room for 7 bottles or 6 bottles plus a straw holder. You'll need to print the base, plus 7 posts. The posts screw into the base using an M12 thread.

Stasher Reusable Bag Drying Rack

My wife purchased a starter set of the Stasher reusable silicone bags. However, they are difficult to dry because they need to stand up slightly open, and due to their thickness they tend to fold in on themselves and close, leaving…

Hook for drying rack - perfect for COVID19 masks

Hello ! I created simple but reliable hook for drying rack. It's designed that way for better air circulation when you are drying the COVID masks. I use that by myself and it's very helpful. Feel free to comment and if You like it please…

Film drying clips for 35mm film

These are a 3D printed set of film drying clips for use in your darkroom, these clips are perfectly sized for 35mm/120 film These clips let you hang up your film up to dry after processing. no more wooden cloths pins or metal binder…

Moka Pot Drying Tower (2-cup & 3-cup)

I wanted a more compact moka pot drying tower that could store better on a counter or cupboard, and I thought I should share the design. The frame and moka pot can be easily lifted and moved using the handle, and the rack on top can be…

Sinus rinse drying rack

This is a model of a rack to store and dry Neilmed sinus rinse bottles.

Hydration bladder drying insert

I previously used a large spoon to aid drying out my Camelbak bladder, but it wasn't that good of a solution. This design isn't anything fancy, but it does a great job of holding the walls of the badder apart to dry it out. I printed it…

Gridfinity - Hanna Checker Cuvette Drying Rack

I currently use a lot of Gridfinity for my drawers. That's why I transferred one of my favorite Hanna checker cuvette holders to Gridfinity. You can find the original on Thinigiverse by pw98 .

Door Hook - Coat Hanger, Laundry Drying, Clothes Hook

Other designs and store-bought items inspired me. It fits perfectly on a 35mm wide door and most can still be closed. Perfect for hanging coats and drying laundry Printed in PLA+ 2mm layers, 0.6mm nozzle with 20% infill

Modular Drying Tree for Breast Pump and Baby Bottle Parts

I made this modular tree specifically because my existing tree and every other one I can find requires careful tetris every wash to fit all the highly-irregularly shaped odds and ends. The 5-arm part fits pump flanges, as well as small…

Tray System for drying Silica Gel in a Creality Space Pi Filament Dryer or a Creality Filament Dry Box 2.0

The generic purpose of this tray system is to regenerate silica gel with indicator, after losing its absorption capacity, in a Creality Space Pi Filament Dryer or in a Creality Filament Dry Box 2.0 (this was suggested and modified by…

Bottle drying stand

This is a stand for bottles to dry

Drying rack for small lab tools

Hello friends! Here is a simple drying rack I designed and printed for my lab. I use it with my spatulas and magnetic stirrers. Hope you'll enjoy it! Happy printing! P.S. No support required :-D

Sock Drying Hanger

Use tree supports on build plate only for version without hook. A practical drying hanger designed for socks, underwear, and other small garments. It holds up to 21 items , helping you keep your laundry organized while maximizing drying…

Modular Dish Drying Rack

A modular dish drying rack designed for drying and organizing plates, mugs, and other kitchen utensils. The design is built around a 15×15 mm aluminum extrusion and allows the overall length of the rack to be customized to fit different…

Silverware holder for dish drying rack

Silverware holder for dish drying rack. Air holes made square to avoid overhangs and bridging. The ‘hook’ on the back needs support. The support is included in the gcode if your printer is similar enough to a Prusa MK3. Made it so that I…

Filament Drying GCode + Generator

Use your enclosed printer to dry your filament. I've added a few sample g-code files, but you may generate more here . Instructions: Download or generate and run the .gcode from this project Please choose the appropriate chamber fan in…

Drying rack fix

My drying rack wire broke so I made this to fix it. Update: Based on the comments I added another model with a through hole so the wire doesn't bent.

Baby Bottle Drying Rack

Two-Piece item. I was able to just friction fit the two pieces, but it will depend on you printer. The branch model can be rotated to fit a small bed. 07-23-24 - Add Bottom Drying rack for those small parts

Dish Rack - The Drying Elephant - Dish Dryer Rack

Are you also doing your dishes by hand? Well I do and i got really tired of drying my cutlery by hand and i had nowhere to place them... So I designed this elephant, inspired by Peleg Design. It uses a channel and angle on the inside to…

HarvestRight Medium Tray Drying Rack

[Update] If you have a newer model with the extra (5 total) trays you will want this version [/Update] I found it very annoying to have a bunch of water drip out of the trays after drying - forcing a second dry before storing. This also…

LP Vinyl Record Drying Rack

This drying rack is designed for LP vinyl records and can be stored inside the Spin Clean Records Washer to save space. The pivots are tall enough to ensure that the records lean on the label rather than the grooves, protecting the…

Darkroom Drying Rack

Simple drying rack for prints. Can be clued or just plugged together. Its best to use a sponge or tool to get rid of most of the water before putting it in. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…

Drying rack wire repair clip (for 14mm tubes)

The original model didn't fit properly on my rack so I tweaked it. I made the overlap between the frame and the bar parametric so you can easily adapt the part to your needs. The fusion parameter is called “RACK_OVERLAP_WITH_BAR” Have fun…

clothes drying rack wire clip fix

fix for broken wire on a drying rack. I included step and f360 file so you can customize it to your measurements. Make sure the fit on the pipe is tight so it does not move. If you do not know how to customize it, just send me a message…

CPAP hose drying hook

Drying adapter I designed for the Resmed CPAP hose - fits shower fittings 20mm or less in diameter

Blowmi Turbo FleshLight Portable USB-C Drying Fan

Test Tube Drying Rack for Aquariums

A drying rack for test tubes with a tray for the caps. Each pole measures 98mm. I made this specifically to dry the test tubes I use to check my aquarium's water parameters after cleaning them. Simply place the tubes upside down on the…

Film Drying Clips for 35mm Film - Remix

Original Model was created by Jlangphoto. Thanks!

Hydroflask/Takeya/EcoVessel Bottle Drying Stand

Yes, this is yet another bottle drying stand. This one is specifically for Hydroflask and compatible bottles, such as Takeya and EcoVessel. I found that the universal ones didn't keep the bottle from falling over if it shifted to the…

API Water Test Kit Holder & Drying Rack

Holder and drying rack for the API Water Master Test Kit. Every model I found was either a holding rig, or a dryer - but never both. This has room for 5 test tubes and 6 of the dropper bottles, I never test for high range PH so for the…

DIY Print Bed Filament Dryer (with Prusa MK4 drying GCode)

The awesome filament dryer design and gcode by @Leftcetio, but with GCode that works on Prusa MK4 and extends the drying time to 6 hours. Read the original creator's description first, it explains a lot in great depth. This description is…