150 modeli
The original fitting got broken in a few years. Remove and replace them with this one. Print it in PETG because it needs to be pushed a bit to tight fit in the tube: make a trial to set your scale ratio to accommodate both the tube and M8…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
(Ersatz)halterung für eine Fahrradtasche. Montage erfolgt an den Rails des Sattels. (Replacement) holder for a bicycle bag. Mounts on the rails of the saddle.
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tisk ve vrstvách
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
Safety first! A construction hat/hard hat for #3DTakoTuesday to wear, while entering the work zone. The hat replaces 3dtakotuesday.top.mm.stl. See here for more accessories and information for #3DTakoTuesday:…
BIG RED BUZZER / EMERGENCY BUTTON (Grobhandtaster / Not-Aus) I always wanted to have one of these "big red buttons". Print instructions Material: For the bottom half of the base, I used black PETG from "Das Filament", for the upper half I…
Wandtattoo Vespa Roller Größe frei änderbar
A baseball cap for #3DTakoTuesday to wear. The hat replaces 3dtakotuesday.top.mm.stl. This design is a derivative of Shawn Bradford 's Lakers New Era Cap . See here for more accessories and information for #3DTakoTuesday:…
The tank has low torque and high grass should be avoided, but on soilid ground its really fun to drift around :D Feel free to modify or remix the tank, STEP and F3D Files are included. Building the tank sould be pretty easy, you can look…
I used PETG. Parts needs to be glued together. I used super glue. This is great solution when your old grundtal broke and you have to wait until your neighbor borrow you welding machine…
Sizes: 1…10x10x1cm 2…12x12x1cm 3…14x14x1cm 4…20x20x1cm HolderB…8x8x12.2 (width)cm (for max. 5 coasters). HolderA…22.2x22.2x6cm.
An accessory for the Lucky 13 Figure, I'd recommend print at 95% scale for easier holding. Add tape or glue to hold the two pieces together.
You can change ‘XY size compensation’ (prusaslicer) or ‘Horizontal expansion’ (cura) to a positive value (eg. 0.2 or more) to increase the strength of the saddle and fork.
Das ist ein Fahrradtaschen Halter für kleine Lasten, z.B. für die Fahrradgabel. Gedruckt ist er aus PETG, 25% Infill, 0,3 mm Layerhight. This is a bicycle bag holder for small loads, e.g. for the bicycle fork. It is made of PETG, 25%…
Meet #3DTakoTuesday, a cute, stackable octopus with a variety of expressive eye options to fit your mood. "Tako" (たこ) is Japanese for octopus. I designed this to improve/practice my Fusion 360 skills. Feel free to drop me a tip if you…
What does a biker do when he misses his 🚲 in the winter? Prints themed home decorations. 😁❄️ Print one or two – maximum size what fits your 3D printer build plate. Use the bottom surface as the front side. Maintain min. 1 mm thickness –…
On our guest Bathroom there was something missing.... of course there was! No one wants to be alone at Christmas ;-) BE NO MORE . Not also will Santa be with you… also Dasher, Dancer, Prancer and all the others(depending how many…
Cup and cap does not need support in 3d printing but the clips do. Also two sets of caps to fit your needs
A sombrero for #3DTakoTuesday to wear. The hat replaces 3dtakotuesday.top.mm.stl. See here for more accessories and information for #3DTakoTuesday: https://www.thingiverse.com/leonardlee/collections/3dtakotuesday Print Settings Printer…
I got tired of my hooks regularly falling off my shelf when I took items from the original Ikea hooks, so I designed hooks that clip onto the bar and are secure in place. Works with kitchen wall shelf Ikea Grundtal or any 16 mm diameter…
Model velmi doporučiji tisknout z Prusamentu: signal white, galaxy black. https://www.prusa3d.com/cs/produkt/prusament-petg-signal-white-1kg/ https://www.prusa3d.com/cs/produkt/prusament-petg-prusa-galaxy-black-1kg/ Vytvořeno v programu:…
I designed these simple hooks for the IKEA Grundtal since I don't like the fact the original steel ones move that much and thus, since I mainly used silicone utensils, they tend to come off the bar. This design is snap-fit, but be careful…
Your secrets are safe with this octopus! This is a remix of my original #3DTakoTuesday that hollows out the octopus to turn it into a container with a screw on top. Use it to store your extra sets of eyes (so many), accessories, or…
Modeled after the axe of the Horseless Headless Horsemann from Team Fortress 2, and the Headtaker's Axe for Demoman. https://wiki.teamfortress.com/wiki/Horseless_Headless_Horsemann I threw together this model in a week leading up to…
An exposed brain for #3DTakoTuesday . The brain replaces 3dtakotuesday.top.mm.stl. See here for more accessories and information for #3DTakoTuesday: https://www.thingiverse.com/leonardlee/collections/3dtakotuesday Fun fact: This design is…
The provided nylon supports tend to break easily Print this support to repair the broken ones Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2mm layers / 0.4mm nozzle Infill: 20 Notes: Prints…
This is an octopus shaped pumpkin bowl with a lid. Perfect for keeping some treats handy for the Halloween season. You can swap out the triangle eyes for any of the eyes found here . Demo video: https://youtu.be/67PSM1I6LIQ You will need…
Monster from the horror-themed, now barely functional MMORPG Requiem: Bloodymare / Memento Mori / whatever. Eight different poses. Blender is able to import animation files for most models from this game, so more poses are possible if…
Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art
A piggy bank remix of the original #3DTakoTuesday . the coin slot measures 31.61mm x 3.15mm, which should handle most coins the bottom hole has a threaded plug for easy bank emptying print "lips" and "eyes" parts from the original model…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas zakrouceny kvetinac i s podtackem co jsem vytvoril pro radost. Snad nekoho potesi :-) Tisknuto bez podpor Pro…
My family and I are visiting Disneyland in a few weeks. I thought it would be fun for #3DTakoTuesday to wear a hat inspired by the classic Mickey Mouse ears hats found in Disney parks. See here for more accessories and information for…
Dry Bag Fahrradtasche Halter für die Fahrradgabel. Für Dry Bags mit 2 - 10 Liter Volumen (Max. Durchmesser ca. 20cm) Weiters Material: 3x M5 Schraube + Mutter (+ Unterlegscheibe) !!! ACHTUNG, nicht zulange Schraube nehmen, achte auf…
Tisk bez vrchní vrstvy pro odkap- no roof for drain Použitá výplň je plástev - honeycomb infill
Check out my Amazon Page to see what kind of gear I use to make these models! This is a remix of the 3DTankor by Patenaude . A 3D printed tank that doubles as a printer calibration test. The barrel should rotate freely after printing;…
(English text: scroll down...) Ein einfacher Halter für einen Einweg-Nassrasierer. Der Halter passt an das "GRUNDTAL" Bad-Eckregal von IKEA (s.Fotos). Anpassbare Version: Benutze den Customizer um die Länge des Halters festzulegen.…
These are headphones for #3DTakoTuesday to wear. See here for more accessories and information for #3DTakoTuesday: https://www.thingiverse.com/leonardlee/collections/3dtakotuesday Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts:…
Is the goal broken or the slider lost? Here are the spare parts. After printing you can paint the numbers so you can see them better. article: here Ist das Tor kaputt oder der Schieber abhanden gekommen? Hier die Ersatzteile. Nach dem…
A cover for a LG FUGA power outlet. Used in many danish home
It is a rigid box as a case for the DTAPE DT50 laser measurer, it is a tool that travels a lot and is fragile, it is better than the cloth case that comes as a gift. The screws to use are: hinges 2.5x15 zipper 3x16 Impression: layer…
An iPad Stand is made for ipad & iPadPro The Stand features an dock for all iPad Models And iPadPro Models and iPadAir Models And all iPadMini Models and features an cutout for changing and more and features an Dock For an Apple pencil
Bust of a Drake Knight, from Dark Souls 2. Comes pre-supported for resin printing but completely FDM printable. Photography and supports by the amazing Charro Zuck. Armor singed and blistered by fingers. Worn by Vyke, knight of the…
Dobré ráno, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás velmi vydařeny kvetinac na stredni az velke kytky. Je celkem pekne vymysleny, vcetne podkvetinače. Ze spodu jsou diry na odvod vody, a v podkvětinaci jsou zase…
A double hook for two scissors (or anything else) for IKEA kitchen rail systems, or any rail with 16mm diameter. It sits stable on the rail, so does not lean, if you hang something on one side only. Print it with snug supports for over…
Holder for the DTAPE DT50 Laser Distance Meter.
Looking for something unique for this Halloween? How about this pumpkin shaped octopus? ... or is it an octopus shaped pumpkin? You will need to print the bottom part and the lips part from the original #3DTakoTuesday octopus. Update: Be…
A decoration frame with a small hole in the back to hang it on your wall. "Home is where my printer is" with a small abstract prusa mk3 printer. .3mf-file contains different colors and is for bambu x1c printers you can use it to configure…
Vape stand 24mm rda/rdta/rta/subohm base Please, share your print in the comments. Thank you!
Es ist eine Geldtasche für Karten, Papiergeld und mit Kleingeldlade. Ich habe die Geldtasche aus PETG gedruckt und den Ring aus TPU. Es kann natürlich auch ein normaler Gummiring verwendet werden. Die Länge des Rings kann mit der Anzahl…
(Deutscher Text: Siehe unten...) This is an addition to the IKEA GRUNDTAL shower rack: For those of you who are still using soap bars, you can now hook a soap bar holder to the "GRUNDTAL". The Thing hooks under the existing plastic inset…
These are glasses for #3DTakoTuesday to wear. See here for more accessories and information for #3DTakoTuesday: https://www.thingiverse.com/leonardlee/collections/3dtakotuesday Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
A hachimaki headband for #3DTakoTuesday to wear. See here for more accessories and information for #3DTakoTuesday: https://www.thingiverse.com/leonardlee/collections/3dtakotuesday Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts:…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here's a wall hanger for print…
Wandtaster (Wippe) passend für die Schweizer 60mm (Ausschnitt) Systeme von Feller, Hager etc. Version 2 Wandtaster (Wippe) aus wenigen Teilen, der perfekt in bestehende Installationen passt. Ideal für Systeme wie shelly, Homematic etc.…
Transform your #3DTakoTuesday from an octopus into a one-eyed monster/alien! This model replaces 3dtakotuesday.lips.mm.stl. See here for more accessories and information for #3DTakoTuesday:…
With this fusion 360 file you can change the name to print with your pet's name :D Adjust the scale for printing the size you want, you can print this with higher layers if you want, it's still strong. I printed with 20% Infill and 0.32mm…
Dies ist ein einfacher Halter für originale Standart Sodastream Flaschen zum Aufhängen an Ikea Grundtal Küchenstangen. Material PETG Es werden zursätzlich 2x M3 Gewindeeinsätze gebraucht, sowie 2 Flachlinsenkopfschrauben M3x8 Halter 1…
I've been watching a lot of Meomi's brilliant Octonauts on Netflix lately. The Octonauts' resident pirate cat, Kwazii, has inspired me to give my octopus an eyepatch accessory. Arrr! The files are for an eyepatch for the right eye (eg.…
Ersatzhalter für eine alte Fahrradtasche von Aldi. Unbedingt auf der Seite liegend drucken, um ausreichend Stabilität zu erreichen. Anbringung mit Blindnieten (Popnieten), dabei innen eine möglichst große Unterlegscheibe verwenden. Print…
Handtaschenhalter für zwei Handtaschen um diese mit Abstand zur Wand zu lagern ohne das die Taschen aneinander scheuern. Kann auch zum aufhängen von Werkzeug genutzt werden, wenn man die Anzahl an Wänden auf 4 oder mehr erhöht .
We have the Ikea laundry baskets for quite some years now. The biggest downside is the poor design of the mount for the caster wheels. In the first few years, the wheels came loose already because of the way the nylon insert is designed.…
Der mitgelieferte Halter der Otinga Fahrradtasche passt nicht an ein Cube Kathmandu Fahrrad, da der Rahmen zu breit ist. Mein Adapter ersetzt die Rahmenhalterung und nutzt den original Taschenclip. The bracket supplied with the Otinga…
I turned my octopus design into an ornament! I recommend a scale of around 60%. To complete this ornament, you will also need to print: The body and thread pieces from the Tako Bowl Remix ( https://www.thingiverse.com/thing:3869476 ) The…
A snap in adapter with m8x.75 threads for a 3.5mm panel mount audio jack to tie into the SidTap header of the Ultimate64 motherboard. 3.5mm jacks can be found on ebay or aliexpress. Thread the jack into the adapter and push the entire…
Halterung für meine Handytasche am Haibike HardSeven 7.0 Yamaha Category: Hand Tools
Blev hullet for stort til dit lampeudtag? Her er redningen.
Build your own 1:50 scale McLaren Speedtail (2020) from a 3D-printed kit card. Print the card without supports, separate the parts from the frame and assemble your miniature Speedtail. Keep it on your desk, add it to your car collection…
Einfacher Wandhalter für den Tuja 4-fach Wandtaster ESW-0ZAA-EU Ich habe hier eine einfachen, schnell zu druckenden Halter für einen Tuja 4-fach Wandtaster ESW-0ZAA-EU entworfen. Er wird mit zwei Senkkopfschraube an der Wand befestigt. Im…
My recommendation for the print settings: Material: PLA Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Logo front side up Legal information: This is a free design variant based on my own measurement results. The model is not licensed…
tento model je určen na mydlo, nebo k davkovači aby mydlo nekapalo na umivadlo:)
This is a 3 piece stand for my longboard. The opening is 125mm x 15mm so it should fit many boards with longer tails. The blue part on mine held to the black part with a pressure fit, but glue may be necessary. For the badge, I did a…
A neat little add-on for your trusty Grundtal wall shelf. The cut-outs for the round bars of Grundtal don't fit perfectly but well enough to stop stuff from sliding around, as the Grundtal is not always perfectly aligned it was the…
This is an end piece for the IKEA Grundtal magnetic knife holder, which allows it to be mounted using 2x medium 3M command strips . The piece works in either direction, so just print two. I printed with supports; the inner supported area…
Print with lots of perimeters to make it as stable as possible. It snaps to Grundtal shelves and does not fall off when you try to attach something to it. And it's way more quiet than the original steel hooks.
McLaren Speedtail as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám pro vás podtácky, aby vaše stoly byly bez koleček. Vhodné pro venkovní grilování a posezení s přáteli. Design jistě rozproudí…
The infamous Headtaker of the Horseless Headless Horsemann (try saying that 3 times fast) SpooOOOooky! This model is Large, so do not underestimate it! (The smaller version in the images is just a prototype printed at 50% scale, The large…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = Dr.Taly…
Can be printend without support. Printing time less then 2 hrs on my Ender3 v2 with: Infill: 100% Perimeters : 3 Bottom layers: 5 You can buy the DT laser here: https://s.click.aliexpress.com/e/_EGLouJf
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám tu pro vás kroucený květináč s podtáckem, který jsem vytvořila pro radost. Snad to někoho potěší :-) Tištěno bez podpěr Pro…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas podtacky aby Vase stoly byly bez kolecek. Vhodne na venkovni grilovacky a posezeni s prately. Dizajn rozhodne…
simple hook that snaps on the tube
Hier mein Grobhandtaster ESP Geheuse ich nutze den Taster für lustige Moderation Momente um Musik oder Videos auszulösen als Quizshow Buzzer kam der auch bereits zum Einsatz der Kreativität sind keine grenzen gesetzt was man damit alles…
Strain relief designed to protect the fragile Micro-USB connector used for USB connectivity on the Dayton Audio DTA-PRO. Quickly printable without supports in the default orientation within your slicer. Designed to work with the USB cable…
Klemmhebel für eine Vaude Fahrradtasche. Getestet mit einem SLA Drucker in Tough Resin
I designed this replacment because a little plastic thing had broke over time:/ Reccomended settings 0.25 or 0.4/hf nozzle 3-4 perimeters 20% Gyroid infill ASA or PETG Other notes for Prusa printer owners Use the satin sheet
Long fork, tall apes, fat rear tyre, flames on the peanut tank: a full 70s custom chopper you build yourself. An original design (no brand logos) at about 1:10 scale, 268 mm long and 150 mm tall. WORKING PARTS The long raked telescopic…
Print with suports
Náhradní čepík do plnícího otvoru atomizéru. Drážka pro těsnění.
Halter für Handtasche am Getränkehalter im Kino, Halter für die Handtasche ist extra abgerundet, um die Handtasche zu schonen. Die Handtsche im Bild hat 2,8 kg gewogen.
The welding on my Ikea Grundtal paper roll holder broke, and the currently-available Grundtal holder requires different holes to be drilled to the wall, and would have left one of the existing holes exposed and looking ugly. Thus I…
Wir besitzen eine Garderobe aus Metalldraht. Um eine Handtasche daran aufzuhängen, habe ich diesen 25 mm breiten Haken entworfen. Er rastet in der Garderobe ein und sitzt fest.Die Metalldrähte der Garderobe haben einen Durchmesser von 3,2…
Designed this extender for Ikea Enudden / Grundtal door holder to have more space between the door and the bath towel. You still can use a hanger. Print Settings Printer: Cetus3D Rafts: No Supports: No Resolution: 0.3 mm Infill: 20 %…
Wir besitzen insgesamt 6 Fahrradtaschen für unsere 2 Fahrräder. Damit wir nicht jedesmal probieren müssen, welche Tasche wo hingehört, habe ich diese Kennzeichungen konstruiert und gedruckt. Nun können wir die Taschen leicht…
A small design I made to simply transform an Ikea Brodrung or Grundtal towel shelf into a real shelf. We had one in our bathroom and were not using it for towels. Inside of taking it down and put a shelf, I decide to use it as a base and…
![Fahrradtaschen Halter [Bicycle bag holder]](https://media.printables.com/media/prints/10396/images/86358_db3e869b-16d0-4273-8535-110dd094f095/whatsapp_image_2019-07-12_at_063822_10396.jpeg)
![Halter Tuja 4-fach Wandtaster ESW-0ZAA-EU [Holder Tuja 4-gang wall push-button ESW-0ZAA-EU]](https://media.printables.com/media/prints/629208/images/4985719_6cf6a572-a708-409b-b114-f98c14447e00_c2f3300d-9de5-4a92-a05f-5d709806d83e/img_20231028_133330.jpg)
