1580 modeli
Are you a skater? You will like it. It's very simple and rad! If you like this model, a coffee helps me stay balanced - both on the board and while modeling ☕ 👉 buymeacoffee.com/nexl Thanks for the support 🙏 Print instructions Material:…
Print with at least 5 perimeters and 50% infill (Gyroid) in PETG or PLA+ for a strong print. Attach with M4 screws and appropriate hardware. I designed these with the proposed standard by Offset Skate Supply (Link and technical PDF…
The rounded skid plate is 12,9 cm wide and block-shaped part is 15,2 cm wide in these files. I made these for my 7.3 inch deck. But I think you could mod the STL files to fit other sizes and shapes, too… I have printed these using 100%…
There have been times when I wanted to ride further or longer with my Onewheel Pint, but had to turn around, because otherwise I might run out of power in the middle of the forest. Luckily, there are technical solutions that can tackle my…
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Check out the new V2 too :) https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files Board 1: WIth Chamfer Board 2: With radius Printing Instructions: Print the axis massive with as many perimeter…
This is an old version. You can find the updated version here . Introduction I'm Seb, I'm a student and I've been working on the idea of 3D printing a skateboard for more than 2 years. The goal was to print both the trucks and the board…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Give it a “like” and a download, so I can get those sweet sweet Prusameters :) --- This is a simple and effective wall hook for hanging skateboards or scooters on the wall, such as in a garage. I printed a few, and realized I could also…
Need a ride? Why not Fingerboard... An Open Source Project - Fusion360 File Available! Print instructions Print, Peel, Snap and Play PS: Model toy in the G-code is 86% scale of .stl model files.
Can You 3D Print a Skateboard? There are a lot of new features in this updated version (old version) : completely revised instructions material test improvements for easier printing version for Prusa XL or other large printers The project…
Skateboard for DUMMY 13. Now your dummy can shred like the ripper it is, right up until it faceplants. Seriously though, this is a non-functional skateboard best used for posing ground or air tricks using the Lucky 13 display stand. There…
Magnetic Whiteboard Pen Holder Magnetic holder for 4 whiteboard pens. The magnets used are 4 round/cylindrical neodymium magnets (20x3 mm). I use the following magnets: https://www.amazon.de/dp/B088FN6YN6 The magnets are inserted during…
I use PET with 15% infill. Supports on rails only.
added a v2 with thicker keychain loop
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a fully functional Fingerboard I made. Use glue to attach the trucks and wheels. Make sure you upload your makes. If you like this model, you know what to do... hit that like button! Make sure to follow us so you get notified when…
Do you like skateboards? That will come in handy. It's very simple and rad! Print instructions Really simple skateboard deck wall mount - holder. The holder is designed to easy fix to the wall using one screw. Just attach the board with 1…
Wall mounted holder for Skateboard / Longboard. Total width: 25 cm Two versions for different wheel diameters: 70 mm and 80 mm Update: As requested, I uploaded version without the screw holes. Happy Printing! Print instructions Print…
Similar to other designs but designed to print without supports. The only hardware required is two skateboard bearings. The mount and spool holder are designed to snap in place ( see image for more details). A long and short variation are…
Skateboard Wall Mount Halter If you like it --> press like it :-) Wheel Diameter up to 60mm width for wheels 35mm Printer Brand: Creality Printer: CR10-V2 Rafts: Brim Supports: tree 40 degrees only on bed Resolution: 0.2 Infill: 100 %…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Two hooks to mount a skateboard to the wall. Fits skateboards with a wheel diameter of up to 54mm. Print instructions 0,2 mil quality setting, no support, no brim
This will hold a standard whiteboard eraser, cleaning fluid, and several markers. It fits either thin or normal thickness markers, and was designed specifically for either of these two starter sets:…
Easy to print Skateboard you can play with on your tabletop or other places. It flips jumps and drives nice and is very durable. Perfect for all age groups :) Prusa edition: It has the Prusa name engraved :) You will not need any glue due…
The best can holder! Has a super snug fit and prints really nicely. I made mine out of PLA but I'm sure ASA would be perfect for the UV resistantance. PRINT SETTINGS: -No supports needed -0.2mm Layer height (Not too specific. Really…
Support needed, infill 15%, no brim, no rafts.
This is a bracket to hang skateboard decks on the wall as a decoration. There are two holes to dowel the bracket to the wall and four to attach the deck. Print on the head as shown in the picture. On the top is a slot for led strips in…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a model of 6008ZZ Bearing, that is used to test fit sizes in Fusion 360. It is non functional, however offers dimensional correctness for use in designs. Category: Robotics
Strong model to firmly secure your skateboard to the wall for easy display The wheels of the skateboard will face outward to better protect the walls. Easy installation, after installing the bottom bracket, it can be tested and adjusted…
These skateboard riser pads will elevate your skateboard deck by 1/8 inch and therefore there will be less wheel bites. Wheel bites can occur if the space between your skateboard deck and your wheels is too small. So if you take a sharp…
The original Cover for the LoveBoard on the right side of the printhead does not fir very good and is only fastened with one screw. Sometimes, wenn the Cover shows a cap to the side of the X-Cariagge, the test of the X-Axis fails because…
SUP pump hose adapter to connect your existing hose to a low pressure air pump. While these won't inflate the SUP to the required pressure, it does get you 80% of the way there.
Easy small Skateboard Holder for the display of your Skateboards, made for a friend. For the 0.4mm nozzle, I personally use 0.2mm layers and 99% gyroid infill - from what I read and watched, it should provide the best integrity and part…
Finger Skateboard If the tire does not roll well, adjust the Z-seam setting. (Orca Slicer recommended)
A simple whiteboard marker holder for four markers with recesses for small magnets (10mm diameter, 2mm depth). You will need 6 magnets and have to print the model twice. Print Settings Printer Brand: Anycubic Printer: Semi-closed 4Max…
Ein einfacher Schlüsselanhänger, 6cm x 2.5cm groß
This is a 12 cm long by 3.5 cm wide mini skateboard, designed for easy 3D printing and fun finger use. The top features a clean hexagon grip pattern for extra grip. The model is print-in-place, meaning there’s no assembly needed — just…
Heyho I built a finger skateboard some time ago and I'm still super happy with it myself :) The first parts I printed back then are still alive and working like the first day. But some people had problems with the pressfit during…
This is a basic screw mounted skateboard holder design. I wanted mounts that were focused on being easy to take boards out and in of - a few models I tried here had far too tight fits and frustrating angles. Screw mounted because I've yet…
If you print a Rocker hook then the second hook must be mirrored. Resolution: 0.2 mm Wall loops: 5° hook 5-loops / 30° hook 10-loops Infill: 5° hook 20% / 30° hook ~40% but more is better Material: PLA , PETG Supports: No Brim No Screw…
Organization tool for whiteboard markers and eraser. It fits 12 Expo dry erase markers. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: Yes Resolution: .2 Infill: 10% Notes: Supports recommended…
I think the name says it all; this is a kiteboard fin based on the Liquid Force 'GTS 2.0' model (so if you have a board that fits these you can use this 3D printed version no problems). This is not just a test piece, but I now use these…
Hello everyone, Token holder remix for Paleo found on Thingiverse (by Lubi90 April 12, 2021) I have changed the place for the dice so that the dice 18x18x18 can now be stored (e.g. Polish version of Paleo Boardgame have dice in that…
Most stencils I found were made for post-its or pocket notebooks and didn't work for my whiteboard. The board I have came with large tipped markers so I needed something bigger than what was out there. It has three checkboxes and lines,…
Holds skateboard on wall Print without top or bottom layer and cool infill for the nice pattern like in the pictures. I find that good double sided tape holds better than small nails but both possible. Mine have been hanging there for 5…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Didn't see many good options for this type of scoreboard out there so decided to make my own. I wanted it to be sturdy yet still fully printable. So this is my design… Updated to V2: improved number cards and rings, and now no longer…
This adapter will allow you to connect your Schrader style bicycle or tire pump to your paddleboard for easy inflation. I am using it with a Milwaukee M18 Electric portable air pump to fill up my paddleboard on the go. I printed in PETG,…
Here you can find a suitable skateboard for the "ETP-Robot" Action-Figure. The skateboard is also easy to print and very stable even with PLA. The wheels can be rotated and the wheel carrier is fixed with printed screws. I would be very…
I paddled in the Huron River last summer and the water was low in spots - I removed the center fin but found that the stability with only the 2 side fins was poor. This reduces the height by about 60% from a standard 9-½" fin, but still…
OpenSCAD SUP Paddleboard Drink Holder - Somewhat parametric for basic dimensions
A simple model that can become a multi-color print on any 3D printer by executing filament hot swaps mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and then…
A 3D printable skateboard wheel. It has a stiff core, but it is able to absorb some bumbs. The 608 bearings can be pushed in simple. The core has an offset and is not supporting the full length of the wheel for more grip. It also has some…
The example is printed without supports (oriented on its side) using PETG with a 0.2mm layer height on an mk3s.
Summary This is a kneeboard that I designed for portable Ham Radio operations. It is 200mm x 140mm when closed and 200mm x 280mm open. It has slots to hold 1.5 inch elastic straps for securing to your leg as well as holes to accommodate…
Cinnamoroll on the roll, skateboarding.
kiteboard handle 2 versions holes 205mm and 170 mm (depending of the brand you got) recommend atleast 1mm thick walls and infill atleast 40% 0.2 layer 0.4 nozzle Print on it its side for the best strength
A whiteboard marker holder designed to be narrow to mount vertically on the border of a whiteboard. Mount with four #6 wood screws.
Should print on FDM without support, I printed using automatic settings on my SLA and the output was spot on
You need to print out at least: Two rails of your choice Two bumpers Two footpads One tyre You also need Two 608 bearings - pull them out of an old fidget spinner (outer diameter: 22mm, inner diameter: 8mm, thickness: 7mm - or use the…
A magnetic holder for whiteboard markers, available in 2, 4, 6 and 8 marker design. Insert a pause when slicing to insert 10x5mm neodymium magnets.
Hi there, here is my skateboard/longboard wall hanger that was designed to fit into a tight space behind my apartment door. The model is light-weight, prints relatively fast and is strong where it needs to be. I would recommend printing…
Slides onto skateboard wheels to stop you from rolling away while practicing difficult tricks
This is a Skateboard/Longboard hanger that doesn't require any support, it should be able to hold any size board. it takes about 6 hours to print per piece, so 12 hours total print time. u will also need 4 screws to secure this thing to a…
Here a really cool Skull Hoody Boy sculpture on a skateboard. The colored picture is a picture of the original model file, vertex painted and rendered (with Blender). The picture in single color is to show how it can look if you do no…
The Wall Mount for Skateboards is a practical and stylish solution for securely storing and displaying skateboards. This innovative mount consists of two parts: one part attaches to the skateboard, while the other is mounted on the wall.…
BOM: 3x M3 Ruthex threaded inserts or similar 3x M3x8 Screws 2x 608 Bearing Edit v2: Since so many have commented it, i added another Ruthex and Screw at the Bottom
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
The mount consists of two separate hangers as you can see in the pictures. They take every standard skateboard truck and also every longboard truck I tested with (Paris, Caliber) and every wheel size from park skate wheels to 90mm…
Multiboard - Halterung für Whiteboard Marker Im Homeoffice nutze ich Whiteboardfolie und kann daher keine magnetischen Stifthalter nutzen. Für das Mutliboard auf meinem Schreibtisch habe ich daher den Stifthalter von OndraM für Multiboard…
This model is compatible with the lego system.
These are 3D printable equivalents of the mounting plates used with Temple Audio's pedalboard. Using some mounting tape, you attach one (or more) of these to a guitar pedal. The mounting plate alignment nubs and center screw go through…
Fits just like the original one does but now allows easy access to the two plugs needed for a nozzle swap. Only the body needs support and only for the hinge Hardware needed: M3nN MK4 kit should have an extra M3x12 bolt MK3S+ upgrade kit…
I needed a compact skateboard stand for my dorm room that wouldn't require any wall mounting solutions. I liked the idea of a vertical stand, but couldn't find any that fit my needs. This is a two-part, easy to print skateboard stand that…
This is the wasteboard I've made for may 3018 CNC Router. I used a 12mm MDF for this. Added some 4mm blind nuts and attached it to the aluminum base with 4mm screws also. Attached to this are some 3d printed clamps and hold downs. All…
This is a simple whiteboard caddy to hold your expo dry erase markers and eraser. An additional spot makes a great place for sticky notes as well. 10 spots for magnets are on the back. Not all 10 may need to be used, but with whiteboards…
Altough I CNC milled this part from aluminum, it might be useful or even work when 3D printed. Re-used the original mounting bracket and screws of the hoverboard chassis. Used the hub motors for a robot project in combination with VESC…
Fin for the Stand Up Paddleboard! This is a fin & a tool of a common stand-up paddleboard. My recommended settings: Filament: PETG / Resin Layer height: 0.12 Walls: 3 Supports needed Enjoy and have fun!
62mm tall and 40mm wide. varied depths depending on angle. 10 degree angle model holds up to a 10mm thick object 4 files options 10 degree angle 15 degrees 30 degrees 45 degrees Made to be printed on its side. feel free to size up if you…
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Tanjiro Kamado magnet. Category: 2D Art
Hey Fingerboard fans. I created a modular skateboard park for your fingerboards. Should print with minimal supports, if there is more things you want on there, comment and I can try to add them. Please download and like, just starting and…
Skateboard wall mount. Use one on top set of holes or two for broken boards. Get fancy and print with wood pla and stain. Print instructions Licence: Creative Commons - Attribution Category: Household Print Settings Printer Brand:…
I have made this wall mount for my electric longboard Yuneec e-go that has the wheels of 90mm of diameter. Print Settings Printer Brand: Zortrax Printer: Zortrax M200 Rafts: Yes Supports: Yes Resolution: 0.19 Infill: 80% Category: Tool…
I have produced this design by trying lots of ideas and printing a lot of imperfect baseboards for my bathrooms. By the time the model here was refined, the prints were coming across very reliably good. I recommend priming and painting…
Easy to print Longboard Holder/Wallount. If you want I can make other dimensions, just let me know. Printed with PLA on Anycubic Mega Zero 2.0 No Support needed.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
This builds upon MR_DUCT's design by adding holes to mount the holder onto the wall with #6 (or #8 if you're careful) screws. I've also added an additional (optional) holder for expo cleaner if you buy a marker kit that includes it. Thank…
A useful marker and eraser holder for a whiteboard. Holds 7 markers and 1 eraser. Printing tips: Use PLA with 0.2mm or thicker. Prints well with thick layers. No supports needed Attach with double sided tape.
HIVE is one of our absolute favourites for two players. It is very entertaining and offers a lot of strategic and tactical depth. Every game is different and many a game that was thought to be lost was turned round at the end. HIVE is…
Skateboard Wall Mount Elevate your skateboard from the floor to the wall with our sleek Skateboard Wall Mount! With just two screws per bracket and two brackets per skateboard, installation is a breeze. Display your board like a work of…
No support. Simple white design for custom painting.
This model is a model skate board made for the Lucky 13 figurene that has the feet attached to it.
For each board, 8 magnets are needed, so 16 magnets are required in total. I designed the model so that it uses magnets with dimensions of 6 mm × 3 mm. In the slicer, a pause needs to be programmed before the cavity for the magnets gets…
