314 modeli
This version of the 98mm elbow includes a backflow valve, flange coupler band and lock. These files include proper settings to print as they are. No tools necessary. Printed with PLA on a Prusa MK3S+ with a .4mm nozzle and .3mm resolution.
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow designed to…
Hose adapters with a 90deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
11. May 2024 V1.0: First release As I had to design a new knee joint for my "Princess Leia" model, I used the same concept for the elbow so that it would also behave anatomically correctly. Please note the alignment as shown in the…
Pipe fittings Elbow Ø16mm / Ø20mm / Ø25mm Hexagonal Shape - Gomiti di raccordo tubi forma esagonale Piping and Fittings for Installations for PVC Electrical Conduit 90 degree Ø16/20/25mm 120 degree Ø16/20/25mm 135 degree Ø16/20/25mm 150…
Hose adapters with a 90deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
In 2018 I had fractured my left elbow. After getting checked at the hospital I asked the nurse if I could get the CT-scans (b&w cross section images). After some search I was able to find a software that allowed me to create a precise 3D…
This is a newer ‘drop that can snap onto the input port of the printhead, and has a bevel on the input side of the elbow to ease install of the PTFE tubing. Note it’s intended to be a firm grip on the process so the tube doesn't easily…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 4-Way Elbow designed to…
Hose adapters with a 45deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
4-way PVC fitting for 3/4" (ID) pipe. With and without built-in support. Print Settings Filament: Polymaker ASA Notes: Printed in ASA for outdoor use. Category: DIY
After giving few original Dummy 13s to friends for use as a drawing aid I got a feedback that the forearm's pointy armour comes visually in the way in some cases. For that I decided to do a slight variation of the elbow and forearm so…
OpenSCAD script to generate parameterized elbow pipe. I've created it for my woodworking dust collection system, but i believe it will work in many applications. You can define: wall thickness first connector outer diameter / length…
A print that improves heat management and ventilation on QIDI's Q1 Pro printer. An internal duct guides chamber exhaust out of the machine's back panel. Adding this duct has three benefits: * Your printer's power supply and main control…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are reconfigurable 22.5 & 45…
90 Degree elbow for diverting the air coming out of my grow tent. Fits on the 4" vivosun exhaust fan. Category: Outdoor & Garden
Here is a jig for a 42.4mm pipe bend, usually used for railings etc. This jig is made up of two part connected with two M5 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . A friend requested fittings to…
Hose adapters with a 45deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
Hose adapters with a 30deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
Our pump has a higher GPH output than what came with the pool and I wanted to make the path a uniform cross-section throughout. Only major change was making the elbow outlet hole round and using a radiused, 90deg bend. Update: Had to…
This is a reinforced replacement part. I printed it for my father's washer six months ago and it is still in use without problems For model: K 2.03 / T-50 and others. KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984.
A dust port compatible with the Dewalt DW735 planer.
Sometimes when using the shaper origin in tight spaces, the vacuum hose can stick out and get in the way. This is a 45 degree elbow adapter that allows the hose to come out at a less obtrusive angle. It's not recommended for continual…
Hose adapters with a 30deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
45 degree elbow that fit inside a regular pipe
RV 4 inch flex hose repair elbow. This was created to address sharp 90° transitions in RV's like the Forest River Salem Cruise Lite that lead to broken/torn heater flex hose. Under the fridge, a 4 inch flex hose is routed right behind the…
An 90 degree adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Please note that the print time could be reduced by manually optimizing the print supports (in…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow that you…
90 degree elbow. 20mm outside diameter and 12mm inside.
1 inch pipe fitting 90 degree turn. BSP Threaded. Fits nicely with my other pipe and pipecoupling models. The support settings may not be 100% but it works. Feel free to tune it and upload a remix :) Printed in Bambu Lab PLA Basic gray. I…
A simple 90 degree "elbow" for a garden hose derived from a McMaster-Carr part
This model is compatible with the lego system.
Here is a jig for a 60.3mm pipe bend. This jig is made up of two part connected with two M8 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so…
This model is compatible with the lego system.
The actual outer diameter of the fitting is 1/8" smaller than nominal size so that it can fit inside of flexible duct. Disclaimer: Not yet print tested. Printing Notes Lightning infill is advisable because of the large empty void.…
Here is a jig for a 76.1mm pipe bend. This jig is made up of two part connected with two M8 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so…
blade arms or blade elbows for dummy 13 , for blade elboy you need to cut the defaul elbow in the arm and attach the blade to the arm , then push it until it clicks in place. there is an image so you can see better
45 Degree elbow for 4" dust collection systems. I use this piping for dust collection with a flange to mount to a box I am using as a planer stand but it should be useful in any similar situation. The flange hole was modeled after a PVC…
osVAC (neo) remix to create a 90 degree elbow coupling (M32-F32). Both ends have a slip ring (i.e., can be rotated 360 degrees) and can be connected to a female and male adapter, respectively. Printing worked fine when part was sliced…
In rearranging my workshop I wanted to put the mitre saw as close to the wall as possible by adding a 90-degree elbow to the dust port for connecting a vacuum hose. I designed this in OpenSCAD and have a great fit with a tapered end that…
This corner elbow has a flat surface which allows PVC Pipe structures to sit flat on the ground. Inspired by TonyYoungblood's 1/2" elbow , I created my version for larger diameter pipe and designed it to be tighter-fitting and use thinner…
A very simple elbow to connect two ½" EMT conduit pieces together. I used matte black PETG…
Needed a 90 degree 4 inch outer diameter elbow adapter for a vent hose for my printer exhaust . Has grooves to seat hose clamps securely .
print at 90 degree angle with supports, see pic.
Needing a quick fix for my 20 year old Karcher K2.99, I quickly modelled a replacement inlet elbow (part number 9.036-704) as I couldn't find one available online at the time. I've since discovered that 9.037-138.0 is a compatible…
I love the Dummy 13 model, and I really appreciated the 600% scale frame parts that Depep1 created, but I found that the knee and elbow joint was too stiff for me to print right, and it would keep cracking when I assembled it. So I made…
Here is a jig for a 51mm pipe bend. This jig is made up of two part connected with two M6 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…
Here is a jig for a 38mm pipe bend. This jig is made up of two part connected with two M5 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…
Here is a jig for a 48.3mm pipe bend. This jig is made up of two part connected with two M6 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so…
Beads (vs barbs) are meant for soft tubing like silicone. Use teflon tape on the threads to get a proper seal! I was a bit lazy in designing the straight fitting and scaled the entire part down so that the NPT threads would fit. The hose…
Elegoo Jupiter rear exhaust port 90 degree elbow 3" diameter. Print to attach extraction hose to the back. For use with a 3" extraction hose or air ducting. May require clamps to hold in place.
This 2-in-1 duct reducer and elbow bend allows for reduction of ducting diameter from 6" (150mm) to 4" (100mm), while providing a convenient 90° right-angle bend. I designed this part specifically for use with my resin printer enclosure,…
I've needed Elbow pipe for a hose that is suppose to end in the drain. The attached STL is the one I needed 11mm goes into the hose and 15mm goes into the drain. It's very simple to modify the sizes with OpenSCAD parameters (I've tried to…
As you can see from the picture I have limited space between the back of my miter saw and the wall. The dust collection adapters I could find didn't quite fit into that space. So a quick bit of modelling and three test prints later I…
Here is a jig for a 3" pipe bend. This jig is made up of two part connected with two M8 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…
Background: I was building a cart for my DeWalt 12 gallon Stealthsonic shopvac and found that the supplied hose for the duststopper was too short if I mounted it on top of the vacuum. This is a right angle (elbow) adapter for the shopvac…
I was building a blanket fort for my toddler, using 32mm (outer Diameter) PVC pipe, and I needed a T piece to connect some parts together, however the piece I needed wasn't in the local hardware store, or online. so I made it. Gosh I love…
Here is a jig for a 70mm pipe bend. This jig is made up of two part connected with two M8 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…
2.5" ID to 2.5" OD elbow for dust extraction. I printed in orientation of first picture with supports to the bottom (not inside). The ends are tapered so may not print flat on bed.
½ inch 90 degree elbow. Printed in 0,16 layer height. Be sure to check out my other piping models!
Small modification to the dummy's joints, making the knees possibly easier to put on.
Here is a jig for a 33.7mm pipe bend. This jig is made up of two part connected with two M5 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so…
This part replaces the stock Dewalt 735 mount with one that includes both a 45-degree elbow and a 100mm magnetic dust collection mount. The upgrade solves two problems. First, the dust port is directly above the outfeed table which can…
This is a right angle 4 inch elbow that I made for a floor A/C unit. I hate how the hose was coming out into the room and looking just ugly so this turns the hose down so it sits nicely. Category: Other
This is a splint to immobilize and elbow at 90 degrees. The arm cups are 80mm in diameter and will accommodate a petite woman or child if the arm is swollen. Secure the brace to the upper arm and lower arm with ACE bandage or any…
3x4 Downspout End with ¾" 90 degree elbow. Will accept a ¾" pvc pipe. Remixed the 3x4 Downspout and created a 90 degree elbow for ¾" pipe. Perfect for hyrdoponics drainage when using a downspout. PETG 20% infill Print with trees and raft…
Elbow attachment for Dyson V10. Remix of Dyson V10/V8/V7 Accessory Mount/Holder by albrnick. https://www.thingiverse.com/thing:2860289 Handy for reaching above window and moulding. Can be printed with PLA. Used ABS to be longer lasting.…
I recently purchased Anesty Dual Fans Spray Booth Paint Booth but didn't like having the exhaust hose flex in essentially a U-Turn from the top, in my case. So I hopped into Fusion and created a 90 degree elbow that is plug-n-play. I…
Made with meshmixer 5 years ago for a steampunk project. Suitable for 3, 4, 5, 6 and 7 mm pipes Printed with 0.03 layerheight
Two-part model to be able to print it without supports. I used Bambulab Translucent PETG for this. It accepts 80 mm duct pipe.
If you've got a need for some additional frame-building parts, you can find all of my various 2020 extrusion builds here. Just a little 90 degree elbow. Configured for at least two M5x10 fasteners per extrusion (can be three on the long…
This 3D design, created by me, is a reinforced three-way elbow joint intended to provide a robust and reliable connection between three parts. The purpose of this design is to offer a strong and durable solution for joining components in…
this is 90 degree Elbow connector with ¼" NPT tread. All dimensions are standard sizes
100mm (4") 90 degree elbow to replace hose fitting on WeCreat Vision Laser cutter. Factory fitting is only 75mm, comes straight off rear of machine and is actually smaller than the opening in the enclosure. This elbow allows for a tight…
Elbow to reduce the force on the hose. With this it fits under my workbench. Has to be printed with supports. I made it with a variable layer height to have a better print quality. Came out good and fits well.
This 90-degree elbow is designed for low pressure drop fluid flows. It accepts 5/8-inch outside diameter tubing that slides in with a press fit. Glue is needed to on the face seal to prevent leaking, so carefully cover the seal with…
This model is compatible with the lego system.
Connects a shop vac hose to a miter saw dust port. Most likely will fit many other tools like belt sanders, planers, etc
This is a simple 90-degree elbow pipe that is compatible with a garden hose. As shown, it is printed in ASA. It uses the thread settings found here:…
In a dust collection system the max elbow you should use is a 45deg sweep. I have tried to keep my system to no more than 30deg. But now with the addition of the new wood lathe space became a problem so here is a 45deg sweep that I needed…
Here is a jig for a 57mm pipe bend. This jig is made up of two part connected with two M8 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…
I needed a low profile elbow to connect our portable air conditioner hose to a wall outlet. It needed to turn 90 degrees and also reduce the 150mm hose to a 100mm connection on the wall Print Settings Printer Brand: Prusa Printer: I3 MK3S…
Needed to vent fumes outside when printing with ABS while minimizing bulk behind the machine and run the hose behind a desk to reach the window unseen. Simple 90º elbow for X1 or X1C exhaust fan to attach a 3” dryer hose and standard hose…
Replacement elbow for the Guitar Hero World Tour drum set may fit other sets but I don't have them to test.
A 90 degree connector for an extraction fan to allow me to better vent out nasty resin, airbrush, or solder fumes. you might need to use an elastic band to “seal” the elbow onto the extraction fan. See gcode for an example of the…
The elbow adapter minimizes the space required for the suction connection. The connection diameter is 36 mm for the opening. Category: Hobby
the PVC lengths depends to your printer.
90° elbow for ½" tubing used for small aquarium water (fountain) pump. I mount my pump to the side of the axolotl tank for a water chiller. The fitting helps prevent the pump from pulling off the side of the tank by allowing the hose to…
This is a fitting I made for the exhaust to go through the wall. It has three parts that I glued together after printing. This way I could adjust the elbow in the direction I wanted it to go. The grille on the inside is to keep larger…
90 degree elbow for 3/4 inch garden hose. Kolano 90 stopni na wąż ogrodowy 3/4 cala.
A blower extension for Stihl SH86. Perfect for clearing gutters. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.4 mm Infill: 15% Filament: Amazon Basics PETG Black Notes: Printed with 0.8mm…
This is a 90 degree elbow for connecting 65 mm slotted agg drainage pipe. It is in three parts (2 x45deg sections plus the sleeve joiner) to make it easier to print and is intended to be glued or plastic welded (3d filament Pen) to get…
I needed to connect a 5 inch OD and 4 inch OD flexible duct -the actual sizes were 4.5 and 3.9 inches- so created a simple elbow adapter and have included the fusion 360 file that you can change the user parameters to the diameters you…
For installing a thick 4 x 6mm2 YMvK-AS ground cable I needed a right-angled M32x1.5 cable gland to feed the cable from the floor to the distribution box. One could buy one, but in my case delivery time was weeks and they're quite…
https://www.castorama.pl/kolano-ocean-63-mm-brazowe-id-1003124.html
