1507 modeli
Another brilliant way to take up even less space on your desk with your hp elitedesk 800! [works on G3 but should work on G2-G6 – lemme know if otherwise] Enjoy! ***Edit*** I've redesigned it from the ground up. it now uses less plastic…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu
I have printed this stand in PLA. To save some time, I used a layer height of 0.3 mm for most of the print. However, for the first 5 layers, I used a layer height of 0.2 mm to ensure a better adhesion to the bed. I also used an infill of…
Wydruk około 2,72 €–3,32 € nettoWstępna wycena jednego wariantu
I wanted bigger buttons for my CSL elite P1 wheel like those on my Clubsport F1 when the caps are on so I designed and made new ones. These should also fit the WRC and BMW wheel which replaced the P1 in 2021 These replace the stock…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Replacement steam knob for Lelit Elizabeth coffee machine.
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This little reprint lets you hand grip and ratchet Xcelite nut driver bits. Nice and firm grip on the tool shaft so it won't drop out, but still easily pressed in and out. To reverse the ratchet, turn the tool over.
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Description This remix of the StageTop Elite Rail Storage offers a modular solution for storing 8 or 10 rails. The original design was limited to 8 rails, but this remix extends its capacity with an additional middle piece. Assembly…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Diesen Trichter habe ich genau so erstellt, dass er auf den 57 mm Siebträger einer Lelit-Espressomaschine (bei mir: Grace) passt. Dabei habe ich darauf geachtet, dass er innen bündig ist und außen begrenzt ist, damit innen das Pulver bis…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
This is a quick release plate for the Fidelity Electronic FTP-1. Used a standard, 1/4-20 UNC Screw that fits most cameras, was threaded so no need for glue. Print Settings: PLA 0.30 mm (make it 0.2 it if you want it prettier but slower)…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
If you own an excellent screw bit set and rachet for cramped space and if you are irritated with original useless PVC pouch, as I do, than here is a solution. Why the original pouch is useles? Because it does not keep content in place.…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Quick print for an adjustment knob for Manitou Skareb Elite MTB Shocks (circa 2003). Mine broke after many years of service. If anyone else still uses these and also needs to replace the knob, this print may be of use. PETG is fine for my…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you use the Coral Accelerator with the LimeLite and you use this (or the original) bracket, see the back-mount Coral bracket here https://www.printables.com/model/908221-coral-accellerator-bracket-for-limelight-bracket
Wydruk około 5,15 €–6,30 € nettoWstępna wycena jednego wariantu
This 19 inch 1U rackmount for the HP Elitedesk mini series is perfect for homelab enthousiasts that want 1 or more HP 1 liter pc's and rack mount them. The mount consists of two printed parts that both can be printed without supports by…
This should support basically every HP ProDesk and EliteDesk mini PC I could find pictures of. It also has mount holes to work mounted forward or backward in the rack. The rack I'm using it with is…
Berserk: Behelit Griffith's Egg of the King. From the best-selling manga Berserk, by Kentaro Miura. I remixed this model from robopillow on Thingiverse to be easier to 3D print. I recreated the top cap piece to be more durable. Printing:…
Nerf full length elite dart magazine. With a printed spring. Feature a symmetrical design so you can insert it both ways. Compatible with most blasters (tested on Spectrum, Stryfe, Turbine and Echo). Printing the magazine Print body,…
Xbox controller stand with cutouts for the paddles on the back. Best fits the elite series 2, but because of the slightly different shape from the series controller originally used by the OP, it's not a perfect fit. Original elite…
Someone requested an xbox controller version of a phone mount I made for the Stadia controller (thing:4008153) so here it is. Confirmed that it does work with an elite series 1 and series 2 controller with paddles (special thanks to…
Recommend printing facing up with organic supports. Have tried many times to get this looking nice on FDM; no problem now with organic supports. I split the figure and base for easier printing. All credit to the amazing ‘solid’ on…
Custom Blaster Sniper Scope Blaster Removable Stock Blaster Reflex Scope 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
To properly secure the weak point, the model must be slightly below where the headband attaches to the frame. https://makerworld.com/en/models/2018195-playstation-pulse-elite-headset-fix#profileId-3040885 (for bambu users) Some people…
Base is extended out a little more than the original, and removed most of the top cover to allow for some clearance for screw heads if using the VESA mount holes, and to allow for some airflow in through the top vents. Prints without…
Dies ist ein Remix von "Mike vom Mars" https://www.thingiverse.com/thing:4025967 zu dem Brillenträger und Ständer gibt es noch eine zusätzlichen Träger zum aufsetzen, der das Elite Batterie-Pack trägt. Es wurden die Controllerbefestigung…
I'm fine with the shorter paddles, but always accidentally knock the long ones. I wanted something to use them to capture video, so made these stubby back paddles for infrequent use. Should work with the Series 1 or 2. Print Settings…
I have changed to fit elite darts and have a more secure lid and hinge. I would recommend printing with 0.2 mm layers.
Elite Saracen Spearman. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted spearman…
HP Elite/Prodesk mini (G3/4/5, possibly later) 10" 1U rack mount with 2 keystone slots. 250mm wide faceplate.
Anaconda model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing This work is strictly fanart and not meant for commercial distribution. All respected trade marks are property of Frontier…
Federal Corvette model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
A 1U bracket to mount an HP EliteDesk 800 G3 , G4, or G5 in a 10-inch rack I designed and printed the Skeleten , a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. From top to bottom: 2U -…
Imperial Cutter model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
English: The Xbox Series X Controller and Headset Holder allows you to securely and conveniently store your Xbox Series X controller and headset near your console. This holder has been specifically designed for 3D printing and is easy to…
A NERF silencer modeled for my son's Elite 2.0. It can probably fit other models. It should be printed as it comes without support.
Hi thanks for printing my files! To connect the mask pieces to the main helmet I inserted some M5 nuts and used a two short screws from inside. The holes in the unions are designed to fit 1.75x15mm pings (you can make them with any…
The middle part needs support on build plate only, the other parts shouldn't need any supports. Uses m4 machine screws and nuts to assemble after printing. buymeacoffee.com/dlford
I designed this to put my Suito Elite Smart Trainer on tennis balls. This allows for significantly more side-to-side movement and also reduces noise/vibration induced into the floor. I use 4x for my suito. The feet are mounted using 7,5…
This is a remix of an awesome Scope by DrDanielJThomas, I have modefied it to fit a nerf gun and hollowed the Scope and added a crosshair. The print version of the model does not require any supports. If you want to seperate the parts…
Simple mounting brackets for different Mini PCs from HP. Should be compatible with the HP EliteDesk 800 series (at least G1 - G5). Possible event compatible with the HP ProDesk 600 series. To maximize the biggest strength, the model…
Print. Cut. Clean. Place. It's that simple.
SSD HDD caddy mounting for HP EliteDesk ProDesk. Just add M3x8 screws and you are all good to go.
This is an insert / organizer for The Quest for El Dorado (Lautapelit Edition), with Heroes & Hexes; Dangers & Muisca; Dragons, Treasures, & Mysteries; and Promo Packs 1-3 (but not Golden Temples). I'm told that it also works with the…
Needed to mount my HP Elitedesk 800 G5 Mini under my desk. Quickly sketched up this design with slotted holes for easy installation. Mount the computer upside down, so it can suck cold air from "top cover". Print Settings Printer Brand:…
Sniper sight designed for Nerf mods tactical rails. Here installed on a Nerf Commander elite 2.0 , an economical solution to get an over-equipped nerf by paying only a small sum! (only 299 kcz here ) The model prints with a support, but…
Krait MKII model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
Snaps firmly onto the rigid arm of the Elite Strap and holds the Oculus Link cable. The Link cable can be removed without removing the clip. Print instructions Print on one side; brim recommended for improved bed adhesion.
This is a toolless caddy/mount for a 3.5 inch HDD in an HP EliteDesk 800 G4 SFF ( no hardware required ). This mount should fit almost all 3.5 inch HDD and should also work in other HP EliteDesk and ProDesk computers. It is meant to…
Python model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
3D Print Files in STL and 3MF format of an Elite miniature! Available in 2 different scales - 1:48 and 1:12. The 3MF is in 1:12 scale. This free pose is 1 of 16 available through the Officer tier on my Patreon until April 30th, 2025:…
FALLOUT NEW VEGAS ELITE RIOT GEAR
Add a second ethernet port to your mini PC! This adapter plate allows an ethernet port to be mounted in the Flex IO slot usually used for an additional display connector. This was designed for a ProDesk/EliteDesk G4, but it may fit other…
Federal Corvette model from Elite: Dangerous Model is split into three parts at the widest points Point the three parts vertically at the seam This work is strictly fanart and not meant for commercial distribution. All respected trade…
A tamping station compatible with Lelit 58mm portafilters (PLA580*) for the Lelit Glenda and similar espresso machines. There are two versions, one is a simple tamping station with slots for the ears of the portafilter and the other is…
I've remixed this nice model to convert it into a nice planter inspired in the chids tale “Manuelita” It was printed on a Artillery Hornet. with prusa slicer 2.5. (using prusa profile Hornet 0.16) Flament : PLA 3n3. Tempreatures : nozzle…
Dart holder for upper tactical rail on Elite 2.0 Commander. Might fit other models also, I designed and tested it on the mentioned model only. Držák šipek pro horní taktickou lištu na Elite 2.0 Commander.Může pasovat i na jiné modely,…
This is a minimalist charging stand for the Xbox Elite series 2 controller. This uses the charging dock that comes with the Xbox elite controller. There are 2 versions of the charging stand - Standard and deep cutout. The deep cutout…
Simple hook for Pulse 3d charger For PS5
Light model to support a Prodesk or Elitedesk mini 800 G2 or equivalent.
Diamondback Explorer model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
The case reuses the screws from the deathadder. The shape is inspired by the new razer deathadder v3, for users with a palmgrip.
This is a basic edit on the original Rack Stud by Erik Jeppesen to make it shorter and slightly more forgiving for lower-accuracy and lower-fidelity printers.
This model took a ridiculous amount of time to clean up to the point of being printable. Print instructions .1mm Layer Height. Infill doesn't matter much. Glue together when finished.
For installation remove the backwater outlet of the E61 Grouphead. The nozzle must be at 6 o clock. The adapter fits very tight. I printed it from PETG maybe ABS would be better on long term. If there ist some trouble with the PETG…
This model has a slight wiggle, but less than the one by kwfredeen . The “ramp” was adjusted for that. It does not fit an original Xbox controller! I also adjusted the cutout from the original model, you can use this stand without…
I designend this because now it looks way better while charging. You can print it as a multi material part or print the logo seperetly and glue it in (could be a thight fit). There is a big hole in the stand so you can add some extra…
A charging stand for the Xbox Elite V2 controller. Accommodates the included charging stand. Uses minimal material due to the cutouts. Doesn't need to be printed with supports, but it might make certain areas more stable if you do. Any…
Visor For Lowrange Elite FS 9inch Fish Finder. Daylight cover. For better viewing. Also in the rain. I Printed this with PETG Black. On the back, No support needed. Width 60mm, 3.2mmThick, 2x100gr, 3 bolts M3x15, 3 nuts M3 Width 80mm,…
lengthened to fit the Quest 3 Elite Strap
ASP Explorer model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
Sidewinder model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
Lelit Bianca portafilter holder
Needs support for the pegs.
A six dart rail mounted magazine for (e.g.) the NERF Commander with its six shot revolver design. I added two extra ammo slots to the model by Oliver Boesch using Bambu Slicer (#workaround). I first tried it using Tinkercad, but the…
My mod is greatly inspired by some commercially available one but I've modeled it myself from the ground up and took the liberty of adjusting it to my liking. This mod will make the braking more linear and less stiff overall which is what…
2x 8G or M4 Countersunk screw or Mounting double sided tape are required. Once installed, you can slide the charging dock into the mount.
I have a Lectric XP4 with the Elite headlight. Like so many others, my light snapped at the mount. I super glued it as a temporary fix before designing this. I hope you like it. Photo of light on the wall is 25' from light to wall. Top of…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
A redesign of the internals of the HP Elite/Pro Desk SSF G2 for more HDD space rather than using external drives. Requires removal of plastic holders for current caddy, which are easily removed with a small flat head screwdriver.…
I designed this replacement bezel, as I could only find one design and it didn't fit, even after scaling it up. So I designed this one from scratch. It has been designed in OnShape if you would like to make any changes. I've made two…
Type-10 Defender model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
These mods are designed to improve the accessibility of regular Nerf Elite Commander 2.0. Once I noticed that my son was having a hard time reloading the Nerf gun because the regular charging handle was a bit too tight and the grip was…
Krait Phantom model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
It printed OK without any support but required a little sanding at the very top. It is hollow with 2mm walls, a bit thicker at the connection. Fusion 360 file included so you can edit all you want. 57.5g filament
Bumper contacts get bent from hard use or being dropped. Print these, pop the top on controller and install. These are approx. 6mmx7mmx2.7mm thick. I printed in PLA+, 100%infill, with 8mm brim for good bed adhesion. 6 minute print
Imperial Clipper model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
This is my take on a charging stand for the elite series 2 controller. It holds the charging dock along with the 4 attachable thumb sticks, the other dpad, and the tension adjuster tool. The top left thumb stick slot is deeper to…
CSGO / CS2 LE-GE Rank Keychains Ranks included: Legendary Eagle, Legendary Eagle Master, Supreme Master First Class, The Global Elite. Material Used: Bambu Filaments Background: Black PLA Stripes/Rank: Silk Gold PLA Supreme/Global Elite…
Includes AMS and non-AMS versions Here’s my Berserk-inspired Behelit keychain , a pocket-sized version of the infamous Egg of the King. I designed it to be lightweight but durable, with a small loop at the top so you can attach it to a…
Side grips for Elite Force 1911
Tower Guards for the TLR 22 5.0 Elite. I will add a rear guard soon and update the designs with version numbers if needed after some testing. This is designed to be attached with zip ties and I wanted good quality ties so I got “TY24MX…
Mamba model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial distribution. All…
This is an upper part of HP EliteDesk 800 G3 front panel. The pcs I've bought arrived with part of the front panel missing, so I've designed and printed a replacement. It's a snap-fit, so should stay in place, if not, some glue may be…
Alliance Chieftain model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
My mom recently gave me my Grandfather's 1950's Melitta 102 porcelain 3 hole coffee filter. I thought it would be a good test for my Revopoint POP 3D scanner. I was able to make an autosurface solid model from the point cloud, but I…
A simple set of feet to keep your laptop upright. Save desks space, and accumulates less dust. I have made the feet wide enough so that they don't fall over when taking the laptop in and out of them. Designed for a HP Elitebook, but…
Simple vertical stand for HP Elitedesk/Prodesk G3-G5 mini. Printed with 0,2 layer, 4-6 perimeters, infill gyroid 10-25% (printed 0,2, 6, 25) 2 variants. For HP Elitedesk 800 mini or HP Prodesk 600 mini. Line G3, G4 and G5. 3mf files for…
model from Elite: Dangerous Fer De Lance Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
Notebook stand for HP EliteBook 845 G7 that allows for a better height when used in combination with a separate keyboard
This is a bracket for the hp elitedesk 800 g6 (DM/1L PC model) flex port 2. Usually a discrete GPU or serial add-on use this cutout in the chassis but I wanted a bracket for an ethernet to m.2 (A+E Key) card since my WiFi slot wasn't…
Does NOT work with the Scimitar RGB as it has different layout for the main buttons and screws. Unfortunately, without buying one I cannot make a model specifically for that one. It works with Scimitar RGB Elite, and should work with…
Imperial Courier model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
